Analog Devices

AD603AQ - 90MHz Low-Noise Variable Gain Amplifier | Analog Devices

부품 번호: AD603AQ ✓ 활성
±4.75 V to ±6.3 V Vdss 8-pin CERDIP Package
MOQ: 1 |

AD603AQ 개요

Analog Devices AD603AQ is a low-noise, voltage-controlled variable gain amplifier designed for RF and IF automatic gain control systems. It provides selectable gain ranges of -11 dB to +31 dB with 90 MHz bandwidth and +9 dB to +51 dB with 9 MHz bandwidth. The device is supplied in an 8-pin CERDIP package.

A variable gain amplifier is an amplifier whose gain can be controlled by an external voltage. Positioned between the RF/IF signal path and a downstream receiver, it allows a system to adapt its signal level before digitization or further processing. The AD603AQ belongs to the controlled-amplifier hierarchy, combining low-noise signal amplification with electrical gain adjustment rather than using a fixed-gain operational amplifier.

The AD603AQ offers linear-in-decibel gain control, with selectable gain ranges covering -11 dB to +31 dB and +9 dB to +51 dB. Its low input-noise spectral density is 1.3 nV/√Hz, making it suitable for receiver front ends where amplifier noise can limit weak-signal detection. The 90 MHz bandwidth supports high-gain signal paths, while the 9 MHz mode provides higher gain where narrower bandwidth is sufficient.

The AD603AQ supports dual-polarity operation from ±4.75 V to ±6.3 V. Its gain-control architecture permits intermediate ranges to be arranged using one external resistor. This flexibility allows designers to trade gain against bandwidth while maintaining control over the gain characteristic and system noise contribution.

Typical uses include RF and IF automatic gain control, communication receivers, radio and television signal chains, instrumentation amplifiers, and wideband measurement systems. In an AGC loop, the gain-control voltage can be adjusted to keep received signals within the input range of a downstream mixer, ADC, or demodulator while limiting overload in strong-signal conditions.

PCB implementation should preserve short, controlled routing around the gain-control and external-resistor networks, provide suitable supply bypassing, and maintain signal-impedance consistency. Because this part is offered in a through-hole CERDIP package rather than a compact surface-mount configuration, its footprint is most appropriate for legacy, industrial, test, and aerospace-style equipment where through-hole assembly and serviceability are priorities.

This page combines the manufacturer's gain, bandwidth, noise, supply, and package information with application guidance, replacement analysis, and practical design considerations for engineers evaluating the AD603AQ in RF and IF signal-chain designs.

드롭인 대체품: AD603AQ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

AD603SQ/883B

✅ 드롭인
📦 8-pin CERDIP
Same AD603 family and 8-pin CERDIP package; ordering-code and qualification details require verification against the Analog Devices datasheet

📋 참조 대체품 (카탈로그에 없음)

AD603AQ 최대 정격 & 전기적 특성

Product Type Voltage-controlled variable gain amplifier
High-Gain Range -11 dB to +31 dB
High-Gain Range Bandwidth 90 MHz
Low-Gain Range +9 dB to +51 dB
Low-Gain Range Bandwidth 9 MHz
Intermediate Gain Configuration Programmable with one external resistor
Gain Control Characteristic Linear in dB
Input Noise Spectral Density 1.3 nV/√Hz
Supply Voltage Range ±4.75 V to ±6.3 V
동작 온도 범위 -40°C to +85°C
Number of Amplifiers 1 circuit
패키지 8-pin CERDIP
실장 유형 Through-hole
수명 주기 상태 Production

AD603AQ 8-pin cerdip 핀 구성 가이드

AD603AQ(8-pin cerdip 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD603AQ의 8-pin cerdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD603AQ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD603AQ 적합 용도: 6 애플리케이션s: RF Automatic Gain Control Receiver, IF Intermediate-Frequency Amplification, Communication Receiver Front End, Automatic Gain Control Instrumentation, Wideband Signal-Level Conditioning, Test and Measurement Signal Chain.

📡

RF Automatic Gain Control Receiver

The AD603AQ fits an RF receiver front end where received signal strength varies widely and the system must prevent downstream mixer or converter overload. Its -11 dB to +31 dB range provides 42 dB of control at up to 90 MHz bandwidth, while the linear-in-decibel control characteristic supports predictable gain adjustment from an AGC loop. The 1.3 nV/√Hz input-noise spectral density helps preserve weak-signal sensitivity. Place it after the RF input network and ahead of the gain-control comparator or detector, with short, impedance-controlled interconnects.

🌐

IF Intermediate-Frequency Amplification

The AD603AQ is well suited to IF signal chains that require programmable attenuation or gain before demodulation and filtering. Its 90 MHz bandwidth in the -11 dB to +31 dB range supports higher-frequency IF paths, while the +9 dB to +51 dB mode provides up to 51 dB when the usable bandwidth is reduced to 9 MHz. The gain-control voltage can follow an AGC detector, reducing overload risk while retaining controlled signal amplitude for the downstream ADC, demodulator, or analog filter.

📶

Communication Receiver Front End

In a communication receiver, the AD603AQ can adapt the signal level to changing propagation conditions and transmitter distance. Its selectable gain ranges cover both attenuation and amplification requirements, allowing the design to reduce gain for strong carriers and increase it for weak carriers. The 90 MHz bandwidth supports RF or IF implementations, and dual supplies of ±4.75 V to ±6.3 V provide the required operating environment. A closed-loop detector and control network should keep the gain command within the amplifier's documented range.

🔧

Automatic Gain Control Instrumentation

The AD603AQ can be used in instrumentation that must maintain a constant downstream level while the measured input changes over a wide range. Its linear-in-decibel gain control supports consistent control-loop scaling, and the two gain-bandwidth choices let designers optimize for either 90 MHz response or up to 51 dB gain at 9 MHz. The external-resistor option permits an intermediate gain arrangement. Validate input range, gain accuracy, loop stability, and settling behavior against the Analog Devices datasheet before using it in a precision measurement path.

📺

Wideband Signal-Level Conditioning

The AD603AQ is appropriate for wideband signal-level conditioning when a fixed-gain amplifier cannot accommodate a wide input range. The -11 dB to +31 dB mode permits gain reduction for large signals and moderate amplification for smaller signals, while the 1.3 nV/√Hz input-noise density supports low-noise signal handling. Use the device ahead of an ADC or fixed-gain processing stage, preserve a consistent reference plane between gain stages, and verify that control-loop bandwidth and amplifier bandwidth together provide adequate settling performance.

📡

Test and Measurement Signal Chain

The AD603AQ can provide programmable gain in a test and measurement signal chain where amplitude variation must be normalized before analysis. The 90 MHz mode supports higher-frequency waveforms, whereas the 9 MHz mode trades bandwidth for gain up to +51 dB. The external-resistor configuration offers additional flexibility for establishing an intermediate operating range. Designers should evaluate noise, gain linearity, gain-control settling, and output behavior across the intended frequency span, then follow the manufacturer application circuit for bypass and termination values.

추천 제품 요약

AD603AQ Analog Devices 사용처: RF Automatic Gain Control Receiver, IF Intermediate-Frequency Amplification, Communication Receiver Front End, Automatic Gain Control Instrumentation, Wideband Signal-Level Conditioning, Test and Measurement Signal Chain AD603SQ/883B Same-family controlled replacement candidate 사용처: RF Automatic Gain Control Receiver, IF Intermediate-Frequency Amplification, Communication Receiver Front End, Automatic Gain Control Instrumentation, Wideband Signal-Level Conditioning, Test and Measurement Signal Chain
What is the AD603AQ?
The AD603AQ is a single-circuit, low-noise, voltage-controlled variable gain amplifier from Analog Devices. According to the Analog Devices AD603 datasheet, it supports a -11 dB to +31 dB gain range with 90 MHz bandwidth and a +9 dB to +51 dB range with 9 MHz bandwidth. It is packaged in an 8-pin CERDIP package and is intended primarily for RF and IF automatic gain control systems.
What are the key specifications of AD603AQ that engineers should know?
The AD603AQ provides linear-in-decibel voltage-controlled gain, 90 MHz bandwidth in its high-gain configuration, and 9 MHz bandwidth in its high-gain-range configuration. Its input-noise spectral density is 1.3 nV/√Hz, its high-gain range extends from -11 dB to +31 dB, and its higher-gain mode extends from +9 dB to +51 dB. The Analog Devices datasheet specifies dual-polarity operation from ±4.75 V to ±6.3 V.
What is the operating voltage of AD603AQ?
The AD603AQ operates from ±4.75 V to ±6.3 V, meaning that both positive and negative supply rails are required. According to the Analog Devices AD603 datasheet, this dual-supply arrangement supports the biasing and signal swing required by the internal amplifier. Board design should provide decoupled positive and negative supply connections and maintain the specified rail range during startup and load transients.
What gain and bandwidth ranges does AD603AQ provide?
The AD603AQ offers two principal operating ranges. According to the Analog Devices AD603 datasheet, the first provides -11 dB to +31 dB gain with 90 MHz bandwidth, while the second provides +9 dB to +51 dB gain with 9 MHz bandwidth. Intermediate gain ranges can also be established with one external resistor, allowing the bandwidth-versus-gain relationship to be tailored to a particular RF or IF signal chain.
Is AD603AQ suitable for RF and IF AGC systems?
Yes, the AD603AQ is specifically suitable for RF and IF automatic gain control systems. Its linear-in-decibel gain control, selectable gain ranges, 90 MHz high-gain bandwidth, and 1.3 nV/√Hz input-noise spectral density make it appropriate for receiver front ends. The Analog Devices datasheet identifies RF and IF AGC as principal applications for this voltage-controlled amplifier family.
Where can I download the AD603AQ datasheet PDF?
The official AD603AQ datasheet is available through Analog Devices' AD603 product page at https://www.analog.com/en/products/ad603.html. The manufacturer page provides the AD603 data sheet and related product documentation. For a new design, use the manufacturer document as the controlling reference for pin assignments, gain equations, supply requirements, frequency response, noise, and recommended application circuits.
Where can I find the AD603AQ pinout?
The AD603AQ pinout is published in the pin-description table of the Analog Devices AD603 datasheet. The component is an 8-pin CERDIP device, and engineers should use that table when assigning supply, signal, gain-control, and configuration connections. Confirm every connection against the exact package drawing and schematic guidance in the manufacturer document before fabrication.
AD603AQ vs AD603SQ/883B: which is better for a controlled replacement?
The AD603AQ and AD603SQ/883B are the same-brand alternatives identified for controlled comparison, but procurement requirements and qualification documentation should be reviewed before substitution. The AD603AQ is specified as an 8-pin CERDIP variable gain amplifier, while AD603SQ/883B appears as an SQ/883B variant. The Analog Devices datasheet remains the authoritative source for pin, temperature, qualification, and ordering-code differences.
When should I choose AD603AQ over another variable gain amplifier?
Choose the AD603AQ when the design specifically requires its documented -11 dB to +31 dB range at 90 MHz or +9 dB to +51 dB range at 9 MHz, along with 1.3 nV/√Hz input noise. It is particularly suitable for RF or IF automatic gain control using a dual supply of ±4.75 V to ±6.3 V. A different amplifier should be selected only if its gain-control characteristic, bandwidth, noise, supply arrangement, and package match the complete system requirements.
Is AD603AQ suitable for a wideband measurement amplifier?
The AD603AQ can suit a wideband controlled-gain measurement system when the required gain, bandwidth, and input-noise performance align with its datasheet limits. Its 90 MHz mode covers the -11 dB to +31 dB range, while the 9 MHz mode reaches +51 dB. The Analog Devices datasheet supports use in RF and IF systems, but instrumentation applications must also satisfy input range, linearity, gain-control accuracy, and dual-supply requirements.
What can replace AD603AQ?
AD603SQ/883B is the identified same-family alternative for evaluation as a possible AD603AQ replacement, but engineers must verify the exact pin, package, temperature, qualification, and ordering requirements before installation. The available cross-reference results do not establish five qualified pin-compatible alternatives. Treat substitution as a controlled engineering decision based on the Analog Devices AD603 datasheet rather than as an automatic PCB replacement.
What is the best Analog Devices equivalent for AD603AQ?
AD603SQ/883B is the closest identified Analog Devices candidate because it belongs to the same AD603 family and is compared directly with the AD603AQ in the available cross-reference information. Confirm that its 8-pin package, electrical ratings, operating-temperature limits, and qualification documentation satisfy the target design. The Analog Devices AD603 datasheet is the controlling document for final equivalence and replacement decisions.
Where to buy AD603AQ online?
Use the Request a Quote form on this page to request AD603AQ availability, lead time, and order handling for the exact 8-pin CERDIP configuration. Quote requests are the appropriate commercial channel for this part because current stock, minimum order quantity, and delivery schedules can change. Provide the target quantity, required date, and any traceability or qualification requirements with the request.
What is the price of AD603AQ?
Submit an AD603AQ quote request through the Request a Quote form on this page for current commercial terms. The displayed product listing does not expose an exact quantity-break table for the AD603AQ, so no static price is stated. The request should specify the required quantity, acceptable delivery date, package configuration, and any inspection or traceability requirements to obtain an actionable quotation.
What is the lead time and stock status of AD603AQ?
Current lead time and stock status for AD603AQ should be requested through the Request a Quote form on this page. The product listing identifies the device as available for ordering but does not state a reliable, dated inventory quantity or manufacturing lead time. Include your forecast quantity and required delivery date so procurement can confirm allocation, scheduling, and any lot or traceability conditions.
How should the AD603AQ gain-control network be designed?
The AD603AQ permits an intermediate gain range to be arranged with one external resistor, according to the Analog Devices AD603 datasheet. Use the manufacturer gain equation and recommended application circuit to select that resistor and establish the required gain-control relationship. Keep the control input and feedback network physically compact to reduce parasitic coupling, and verify control range, stability, and bandwidth over the intended operating envelope.

엔지니어링 참조 데이터: AD603AQ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AD603AQ when the receiver or signal conditioner needs a voltage-controlled gain element with linear-in-decibel adjustment, selectable bandwidth, and a documented -11 dB to +51 dB operating envelope. Its 90 MHz mode is appropriate when the -11 dB to +31 dB range is required, while its 9 MHz mode supports higher gain up to +51 dB when narrower bandwidth is acceptable. The 1.3 nV/√Hz input-noise spectral density also favors weak-signal work. AD603SQ/883B is the identified same-family replacement candidate, but review its ordering code, temperature rating, qualification status, and electrical limits in the Analog Devices datasheet before substituting it. Do not select a different variable gain amplifier merely by matching bandwidth; verify gain-control slope, supply arrangement, input range, stability, and package.

대체품과의 비교

파라미터 이 제품 AD603SQ/883B
Package 8-pin CERDIP 8-pin CERDIP
Brand Analog Devices Analog Devices
Product Type Voltage-controlled variable gain amplifier AD603-family variable gain amplifier

주요 차별점

  • Combines attenuation and amplification in one voltage-controlled range (vs AD603SQ/883B)
  • Supports substantially higher gain when bandwidth can be reduced (vs AD603SQ/883B)
  • Provides low-noise input performance for controlled RF and IF amplification (vs AD603SQ/883B)

설계 노트

Keep the AD603AQ signal inputs, output, gain-control connection, and external gain-setting resistor on short PCB paths. Use a continuous ground reference beneath the signal route and maintain consistent impedance between the amplifier and adjacent RF or IF stages. The CERDIP package supports through-hole assembly, but lead inductance and excessive loop area can still degrade high-frequency behavior. Follow the manufacturer's recommended application circuit and component-placement guidance.

Provide decoupled positive and negative supply rails within the specified ±4.75 V to ±6.3 V range. Place the bypass capacitors close to the corresponding supply pins and return them to the same quiet ground reference used by the signal path. Confirm startup sequencing, rail symmetry, and the maximum supply combination before power-up. An abrupt or asymmetric rail condition can exceed the device's intended operating conditions even if the nominal voltages are correct.

Do not treat the two gain ranges as interchangeable bandwidth modes. The -11 dB to +31 dB range has 90 MHz bandwidth, whereas the +9 dB to +51 dB range has 9 MHz bandwidth. Select the range according to the required gain and signal bandwidth, then use the Analog Devices gain equations to establish an intermediate range with one external resistor. Verify the resulting gain-control slope, usable control-voltage span, and stability.

In an AGC system, separate the high-speed signal path from the gain-control and detector path to prevent feedback from modulating the amplifier unintentionally. Maintain controlled impedance and avoid long parallel runs around the gain-control node. Include the detector and loop filter in stability and settling evaluations, because the closed-loop bandwidth must be compatible with both the 90 MHz amplifier mode and the intended system response time.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering code. Consult the manufacturer product page and current material-declaration documentation before regulatory use.

관련 검색

AD603AQ datasheet AD603AQ pinout AD603AQ datasheet pdf AD603AQ specifications AD603AQ 90MHz amplifier AD603AQ variable gain amplifier AD603AQ RF AGC amplifier AD603AQ IF AGC amplifier AD603AQ equivalent AD603AQ replacement AD603AQ vs AD603SQ/883B AD603AQ price AD603AQ 8-pin CERDIP Analog Devices AD603AQ

관련 부품 & 용어

Analog Devices AD603AQ AD603 AD603SQ/883B variable gain amplifier voltage-controlled amplifier controlled amplifier RF automatic gain control IF automatic gain control linear-in-decibel gain control input noise spectral density gain-bandwidth relationship external gain-setting resistor 8-pin CERDIP through-hole package dual-polarity supply RF receiver IF signal chain communication receiver signal-level conditioning measurement instrumentation semiconductor integrated circuit amplifier IC
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기