Analog Devices

AD642KH - Dual 1 MHz BiFET Op Amp | Analog Devices

부품 번호: AD642KH ✓ 활성
500 uV Vdss 35 pA when warmed up Id 8-pin hermetically sealed TO-99 metal can Package 1 kHz Speed
MOQ: 1 |

AD642KH 개요

Analog Devices AD642KH is a precision dual BiFET operational amplifier with two matched low-noise JFET-input amplifiers, a 1 MHz gain-bandwidth product, and an 8-pin hermetically sealed TO-99 metal-can package. It offers a maximum input bias current of 35 pA at temperature, matched bias-current characteristics, low offset voltage, and low input-voltage noise for high-impedance precision signal chains.

A BiFET operational amplifier is an operational amplifier whose input stage uses junction field-effect transistors. This amplifier category belongs to the hierarchy of operational amplifier, analog amplifier, analog signal-conditioning IC, and power-management-independent semiconductor. JFET inputs provide very low input bias current, while the bipolar fabrication and laser trimming described by Analog Devices support controlled offset voltage and close matching between the two amplifiers.

The AD642 family emphasizes precision and channel matching. Its ion-implanted JFET inputs are paired with monolithic bipolar circuitry and laser-wafer trimming. Important features include a maximum low offset voltage of 500 uV, a maximum warmed input bias current of 35 pA, low input-voltage noise, high open-loop gain, low quiescent current, and specified crosstalk at 1 kHz. These characteristics make each channel suitable for guarding, instrumentation, photodiode interfaces, and high-impedance buffer applications.

The device operates from dual supplies up to ±18 V as identified for the AD642KH. The exact common-mode input range, output swing, supply-current limits, and full operating-temperature limits must be taken from the pin and electrical tables in the manufacturer datasheet. Because the device uses a hermetically sealed metal-can package, mechanical clearance and lead-bend requirements deserve attention during PCB assembly and thermal design.

Typical uses include two-channel precision buffers, low-current transducers, dielectric and capacitance measurement front ends, photodiode amplification, and industrial instrumentation. In a transimpedance configuration, the AD642KH converts weak sensor currents into voltages while its JFET inputs limit the current drawn from the sensor. Its dual matched channels can also be used for differential monitoring where channel-to-channel tracking is important.

When laying out the circuit, keep input leads short and isolate sensitive input nodes from switching nodes and high-current return paths. Use the manufacturer pin-description table when assigning the eight leads, and check the package drawings for orientation and lead spacing before assembly. Decoupling capacitors should be placed close to the supply pins, while the input network should avoid leakage paths that could undermine the low 35 pA bias-current capability.

This product page combines the AD642KH electrical characteristics, matched-channel benefits, packaging guidance, verified drop-in alternatives, application patterns, and selection trade-offs. It is intended to help engineers determine whether the hermetically sealed 8-pin TO-99 AD642KH is suitable for a precision, high-impedance circuit before beginning layout.

드롭인 대체품: AD642KH — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: AD642KH (동일 폼 팩터 및 풋프린트) — 차이점: Amplifier Type, Input Voltage Noise, Maximum Offset Voltage, Number of Channels.

Analog Devices
Amplifier Type: Precision dual BiFET operational amplifier
Input Voltage Noise: 2 uV p-p
Maximum Offset Voltage: 3500 uV
비교 대상: AD642KH →

AD642JH

✅ 드롭인
📦 8-pin TO-99
Same matched dual BiFET architecture, 1 MHz gain-bandwidth class, and 8-pin TO-99 footprint; the J-grade offset tolerance is looser than the K-grade AD642KH specification of 500 uV maximum

📋 참조 대체품 (카탈로그에 없음)

AD642SH

✅ 드롭인
Analog Devices
📦 8-pin TO-99
2 · Precision dual BiFET operational amplifier · 3500 uV · 1 MHz · 35 pA when warmed up · 500 uV maximum · 2 uV p-p · High

가격 문의

데이터시트 보기 →

AD642KH 최대 정격 & 전기적 특성

Amplifier Type Dual precision operational amplifier
Number of Channels 2 channels
Input Transistor Type Ion-implanted JFET input
Internal Process Monolithic bipolar with laser-wafer trimming
Gain-Bandwidth Product 1 MHz
Maximum Offset Voltage 500 uV
Maximum Offset Voltage, Listing Classification 2,000 uV
Maximum Input Bias Current 35 pA when warmed up
Input Voltage Noise 2 V p-p
Crosstalk Measurement Frequency 1 kHz
공급 전압 ±18 V
Open-Loop Gain High
대기 전류 Low
Matching Characteristics Matched offset voltage, offset voltage over temperature, and bias current
Package Type 8-pin hermetically sealed TO-99 metal can
실장 유형 Through-hole
RoHS 상태 unknown
REACH Status unknown

AD642KH 8-pin hermetically sealed to-99 metal can 핀 구성 가이드

AD642KH(8-pin hermetically sealed to-99 metal can 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD642KH의 8-pin hermetically sealed to-99 metal can 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD642KH.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD642KH 적합 용도: 6 애플리케이션s: Photodiode Signal Conditioning, Precision Instrumentation Amplification, High-Impedance Sensor Buffering, Capacitance Measurement Front End, Differential Sensor Monitoring, Low-Level Analog Signal Conditioning.

📷

Photodiode Signal Conditioning

The AD642KH fits low-current photodiode front ends because its JFET input stage limits warmed input bias current to 35 pA while providing a 1 MHz gain-bandwidth product. Place the photodiode at the noninverting input and establish the transimpedance relationship with a feedback resistor and compensation capacitor selected from the manufacturer application guidance. The low 35 pA bias current reduces error in weak-current measurements, although input guarding, clean board materials, and leakage control remain essential. The dual matched channels can support a second signal for monitoring or differential correction when channel-to-channel tracking is valuable.

🏭

Precision Instrumentation Amplification

The AD642KH is appropriate for precision instrumentation front ends that require two closely related low-bias-current channels. Its matched offset voltage and matched bias-current characteristics help preserve signal relationships between measurement channels, while the 500 uV maximum low offset specification supports high-accuracy amplification. Each amplifier can be used as a low-level voltage buffer or as part of a difference amplifier. The practical benefit is reduced error from input bias current, although the overall accuracy still depends on resistor matching, reference quality, clean layout, and compliance with the datasheet common-mode and output-swing limits.

🧩

High-Impedance Sensor Buffering

The AD642KH can buffer sensors whose output impedance is high enough that amplifier input current would disturb the source. With a maximum warmed input bias current of 35 pA and low input-voltage noise, the device limits loading compared with higher-bias bipolar input stages. Use the amplifier as a voltage follower when preserving the sensor voltage is more important than current drive, or add gain when signal amplitude requires it. Guard the input node, minimize exposed board area, and avoid contamination from flux residues and humidity. Verify the final bias current and leakage at the actual operating temperature rather than relying only on the room-temperature headline value.

⚡

Capacitance Measurement Front End

The AD642KH is suitable for capacitance and dielectric measurement circuits where the sensor may present a very small current or charge signal. Its 1 MHz gain-bandwidth product supports useful signal bandwidth, and the JFET input stage avoids loading the sensor with bias current as high as that of conventional bipolar inputs. The amplifier can drive a guarded sensor node through a feedback network while the second channel provides monitoring, excitation return, or a reference buffer. Component leakage, guard spacing, dielectric absorption, and parasitic capacitance can dominate the result, so use guarded PCB construction and evaluate the complete measurement system across temperature.

📊

Differential Sensor Monitoring

The AD642KH is useful in differential monitoring because its two amplifiers are designed with closely matched offset voltage and bias-current behavior. Each channel can buffer one side of a differential sensor, after which a downstream differential stage performs subtraction and common-mode rejection. Matching within the amplifier reduces gain error that might otherwise arise between the two channels. The implementation still requires close attention to resistor-network ratio accuracy, input bias-current cancellation, and the analog common-mode range. Because both channels operate in one hermetically sealed metal can, thermal proximity can also support stable comparative measurements when the package is mounted away from major heat sources.

📡

Low-Level Analog Signal Conditioning

The AD642KH can condition low-level analog signals where offset, bias current, and channel matching affect measurement integrity. The 500 uV maximum low offset specification and 35 pA maximum warmed bias current make it appropriate for buffer and gain stages preceding measurement or control circuitry. The 1 MHz gain-bandwidth product allows operation beyond static precision measurements, provided stability and compensation are evaluated for the actual feedback network. Keep input traces short, maintain symmetric routing between channels, and decouple supply pins close to the device. Also check output swing, load, and output-current conditions against the manufacturer electrical tables before finalizing the signal chain.

추천 제품 요약

AD642JH Same-family dual JFET-input amplifier with a different precision-grade suffix 사용처: Photodiode Signal Conditioning, Precision Instrumentation Amplification, High-Impedance Sensor Buffering, Capacitance Measurement Front End, Differential Sensor Monitoring, Low-Level Analog Signal Conditioning AD642SH Analog Devices 사용처: Photodiode Signal Conditioning, Precision Instrumentation Amplification, High-Impedance Sensor Buffering, Capacitance Measurement Front End, Differential Sensor Monitoring, Low-Level Analog Signal Conditioning
What is AD642KH?
The AD642KH is a precision dual BiFET operational amplifier from Analog Devices with a 1 MHz gain-bandwidth product and an 8-pin hermetically sealed TO-99 package. According to the manufacturer datasheet, it uses ion-implanted JFET inputs and laser-wafer trimming to provide matched offset voltage, matched bias current, and low input-voltage noise. It is intended for precision, high-impedance signal-conditioning applications.
What are the key specifications of AD642KH that engineers should know?
The AD642KH combines two matched amplifiers, a 1 MHz gain-bandwidth product, a maximum low offset voltage of 500 uV, and a maximum warmed input bias current of 35 pA. According to the Analog Devices datasheet, ion-implanted JFETs and laser trimming improve matching and temperature tracking. The device is supplied in an 8-pin hermetically sealed TO-99 metal-can package for through-hole assembly.
What is the input bias current of AD642KH?
The AD642KH has a maximum input bias current of 35 pA when warmed up. According to the Analog Devices manufacturer datasheet, this low-current JFET input characteristic makes the device suitable for guarding, photodiode interfaces, and other sources with very high source impedance. The specified 35 pA limit should be considered alongside temperature, leakage, PCB cleanliness, and contamination at the board level.
Where can I download the AD642KH datasheet PDF?
The official AD642KH datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD642.pdf. The document contains the AD642 family electrical characteristics, package information, pin descriptions, and typical application circuits. Use the package drawing and pin table when assigning the eight TO-99 leads on a new board.
Where can I find the AD642KH pinout?
The AD642KH pin assignments are defined in the pin-description table of the official Analog Devices AD642 datasheet. The device is an 8-pin TO-99 hermetically sealed package, but its exact lead numbering and connection names should be assigned directly from the manufacturer diagram. Confirm orientation before soldering because the metal-can package does not use the familiar notch-and-dot conventions of many integrated-circuit packages.
Where to buy AD642KH online?
Use the Request a Quote form on this page to request AD642KH availability, sourcing support, and a current quotation. The part is listed by Analog Devices as a precision dual BiFET operational amplifier in an 8-pin hermetically sealed TO-99 package. Include your required quantity, date code preference, and inspection requirements with the request so the supplier can confirm the appropriate fulfillment path.
What is the price of AD642KH?
Current AD642KH pricing is handled through the Request a Quote form on this page. The form is the appropriate route for checking a firm quotation, volume breaks, date-code constraints, and any lot or inspection requirements. Prices for legacy hermetically sealed operational amplifiers can vary with quantity and sourcing conditions, so submit the exact MPN and required order quantity for a current response.
What is the lead time for AD642KH?
Request the current AD642KH lead time through the Request a Quote form on this page. Include the required quantity, acceptable date-code range, and target delivery date. Because AD642KH uses a hermetically sealed TO-99 package and is a precision amplifier, procurement planning should account for the device marking, inspection, and assembly requirements stated in the manufacturer documentation.
Is AD642KH in stock?
Current AD642KH stock status should be confirmed through the Request a Quote form on this page. Provide the quantity, target shipment date, and any date-code or traceability requirements. The exact package suffix and condition required by your assembly process should also be stated, particularly when substituting an alternative ordering code with a different precision grade.
AD642KH vs AD642JH - which is better for precision measurement?
The AD642KH is preferable when the design needs the tighter K-grade offset tolerance, while the AD642JH is the lower-offset-tolerance grade in the same AD642 family. According to the manufacturer family information, both retain the same dual JFET-input architecture and 1 MHz gain-bandwidth class. The selection should therefore depend on the required offset tolerance, operating conditions, and the specific ordering-grade datasheet rather than package compatibility alone.
What is the difference between AD642KH and AD642SH?
AD642KH and AD642SH belong to the same matched dual BiFET AD642 family, but the ordering suffix identifies different device grades. The cross-reference information identifies consistent terminals and packages, while the manufacturer family documentation distinguishes the available precision grades. Verify the exact offset-voltage limit, temperature range, and orderable marking for each suffix before treating either part as the specified AD642KH.
When should I choose AD642KH over AD642JH?
Choose AD642KH when the circuit requires the tighter offset tolerance associated with the K grade, particularly in precision instrumentation where input-offset error directly limits accuracy. Choose AD642JH when its documented offset limit meets the design and cost requirements. Both devices use the same matched dual JFET architecture, so the decision should be based on the exact grade limits in the manufacturer datasheet rather than on changes to the basic amplifier function.
Is AD642KH suitable for high-impedance sensor front ends?
Yes, the AD642KH is suitable for high-impedance sensor front ends because its JFET input stage provides a maximum warmed bias current of 35 pA and low input-voltage noise. According to the Analog Devices datasheet, the two channels also have closely matched bias-current characteristics. Board cleanliness, connector leakage, guarding, and protection-network leakage must remain controlled because these external effects can dominate errors at picoampere current levels.
What can replace AD642KH?
The verified drop-in options for AD642KH are AD642JH and AD642SH, both from Analog Devices and both using the same 8-pin TO-99 package and matched dual BiFET architecture. The principal change is the ordering-grade specification, so verify offset tolerance, temperature range, and exact lead assignments against the target design. No cross-brand drop-in replacement is established by the available technical records.
What is the best cross-brand equivalent for AD642KH?
No cross-brand drop-in equivalent for AD642KH is established by the available manufacturer and cross-reference records. The AD642KH is a hermetically sealed, precision dual BiFET amplifier in an 8-pin TO-99 package, so package similarity alone does not guarantee offset, bias-current, matching, noise, or temperature compatibility. Use the Request a Quote form for sourcing help, and require a formal pin-and-parameter cross-check before approving any proposed substitute.

엔지니어링 참조 데이터: AD642KH — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AD642KH when the design requires a hermetically sealed dual BiFET operational amplifier with very low warmed input bias current, closely matched channels, and the K-grade low-offset specification of 500 uV maximum. It is well suited to photodiode interfaces, guarded high-impedance buffers, capacitance measurement, and precision instrumentation. Select AD642JH when its 1,000 uV grade maximum remains acceptable and the same TO-99 footprint can be retained. Select AD642SH only after checking its exact grade-specific offset and temperature limits. Do not approve an arbitrary cross-brand amplifier solely because it is dual and hermetically sealed; input bias current, noise, offset, matching, common-mode range, output swing, pin assignments, and temperature performance must all be compared. The available records establish two same-brand drop-in options but do not establish a cross-brand replacement.

대체품과의 비교

파라미터 이 제품 AD642JH AD642SH
Brand Analog Devices Analog Devices Analog Devices
Package 8-pin TO-99 hermetically sealed metal can 8-pin TO-99, same package 8-pin TO-99, same package
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier
Input Stage Matched ion-implanted JFET inputs Matched JFET inputs Matched JFET inputs
Gain-Bandwidth Product 1 MHz 1 MHz class 1 MHz class
Maximum Input Bias Current 35 pA when warmed up 35 pA class 35 pA class
Supply Voltage ±18 V ±18 V ±18 V
Offset and Bias Matching Matched offset voltage, temperature tracking, and bias current Matched-channel family construction Matched-channel family construction
Input Voltage Noise 2 V p-p as listed 2 V p-p class 2 V p-p class

주요 차별점

  • Tighter offset tolerance within the same matched dual JFET family (vs AD642JH)
  • Matched dual-channel architecture for differential measurement (vs AD642SH)
  • Low bias current for high-source-impedance measurement (vs AD642JH)

설계 노트

Keep the AD642KH input nodes short and surrounded by a grounded guard where the circuit operates with picoampere-scale bias current. Avoid routing sensitive inputs beside supply traces, relay contacts, high-impedance nodes, or exposed assembly contamination. The 8-pin TO-99 package also requires mechanical clearance for the metal can and its leads; confirm the manufacturer's package drawing before placing adjacent components or defining the board edge.

Place input and output signal paths symmetrically when both matched channels participate in a differential measurement. Keep feedback components close to the relevant amplifier pins and minimize loop area around the input nodes. Use a ground reference that remains quiet under changing sensor currents, because common ground impedance can convert supply and load variations into apparent input error even when the amplifier itself has excellent matching.

Do not infer the complete pinout, operating-temperature range, common-mode range, or output swing from the device description alone. Assign the eight TO-99 leads using the Analog Devices pin-description table and verify each electrical limit before applying maximum supply voltage. Also avoid substituting solely by suffix: AD642JH and AD642SH share the package and family architecture, but their precision-grade limits must be compared with the AD642KH requirements.

Monitor power dissipation at the actual supply voltage, output voltage, and load current. The dual amplifier can consume additional quiescent current when both channels operate at appreciable output levels. Use the manufacturer thermal information for the hermetically sealed metal-can construction and avoid placing the package next to a major heat source. Estimated: dissipated power equals the sum of each channel's supply-to-output voltage drop multiplied by its output current plus the relevant internal dissipation.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is identified for AD642KH. The hermetically sealed TO-99 package is a mechanical and environmental construction detail, not proof of any particular compliance status.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD642KH datasheet AD642KH datasheet pdf AD642KH pinout AD642KH TO-99 AD642KH specifications AD642KH offset voltage AD642KH input bias current AD642KH replacement AD642KH vs AD642JH Analog Devices AD642KH AD642KH price AD642KH stock AD642KH photodiode amplifier AD642KH high impedance buffer AD642KH equivalent

관련 부품 & 용어

Analog Devices AD642KH AD642JH AD642SH AD642 dual operational amplifier BiFET operational amplifier JFET input stage ion-implanted JFET precision amplifier analog signal-conditioning IC gain-bandwidth product input bias current input voltage noise offset voltage matched bias current laser-wafer trimming 8-pin TO-99 hermetically sealed metal can through-hole package photodiode amplifier high-impedance buffer precision instrumentation capacitance measurement differential measurement
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기