AD7472ARUZ-REEL - 12-Bit 1.5MSPS SAR ADC | Analog Devices
부품 번호: AD7472ARUZ-REEL ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.1 | $11.10 |
| 10 | $10.2 | $102.00 |
| 100 | $8.45 | $845.00 |
| 500 | $7.3 | $3,650.00 |
| 1,000 | $6.4 | $6,400.00 |
AD7472ARUZ-REEL 개요
An SAR (Successive Approximation Register) ADC is a type of analog-to-digital converter that uses a binary search algorithm, an internal DAC, and a comparator to digitize an analog input one bit at a time over N clock cycles, where N equals the converter's resolution. SAR ADCs occupy the middle ground between flash converters (fastest, most power-hungry) and sigma-delta ADCs (highest resolution, lowest speed), making them ideal for general-purpose industrial, instrumentation, and communication applications that need single-shot or burst-mode conversion at hundreds of kSPS to a few MSPS. The AD7472 family sits in the data acquisition -> ADC -> SAR ADC -> semiconductor taxonomy of signal-chain components.
Key features include 12-bit resolution with no missing codes, a track-and-hold front end, low power consumption, and a wide input bandwidth suitable for multiplexed or single-channel systems. The wide 2.7 V to 5.25 V supply range allows designers to power the part directly from a 3.3 V or 5 V system rail, simplifying power-tree design. Industrial temperature grade (-40C to +85C) and TSSOP surface-mount packaging support compact PCB layouts.
Typical applications include industrial process control, portable and battery-powered instrumentation, data acquisition systems, optical networking modules, and motor control feedback loops. The parallel interface and moderate throughput make it well matched to embedded control tasks where deterministic latency is more important than serial-link compactness.
When designing with this ADC, place a low-ESR 100 nF decoupling capacitor close to the VDD pin and a bulk 10 uF capacitor on the supply rail. Provide a clean low-impedance reference voltage to the REFIN pin and ensure the analog input bandwidth is matched to the source impedance to avoid conversion errors.
This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes that complement the manufacturer datasheet for the AD7472ARUZ-REEL.
드롭인 대체품: AD7472ARUZ-REEL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD7472ARUZ-REEL (동일 폼 팩터 및 풋프린트) — 차이점: Data Interface, Operating Temperature, Package, Packaging, Sampling Rate.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
AD7472ARUZ-REEL7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7472ARU-REEL7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7472ARUZ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7470ARUZ-REEL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7470ARUZ-REEL7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7470ARU-REEL7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD7472ARUZ-REEL 최대 정격 & 전기적 특성
| 분해능 | 12 bits |
| Number of Channels | 1 |
| Converter Type | SAR (Successive Approximation) |
| 샘플링 속도 | 1.5 MSPS |
| Input Voltage Range (VDD) | 2.7 V to 5.25 V |
| Data Interface | Parallel |
| Power Consumption (3 V, 1.5 MSPS) | 3.34 mW typical |
| Power Consumption (5 V, 1.5 MSPS) | 7.97 mW typical |
| 동작 온도 | -40C to +85C |
| 패키지 | 24-TSSOP (RU-24), 4.40 mm width |
| 실장 유형 | Surface Mount |
| Packaging | Tape & Reel |
| Input Type | Single-Ended |
| Architecture | Track-and-Hold front end |
| RoHS 상태 | Compliant |
| Temperature Grade | Industrial |
AD7472ARUZ-REEL 핀 구성
| 핀 1 | VREF — Reference voltage input |
| 핀 2 | VIN — Analog input (single-ended) |
| 핀 3 | AGND — Analog ground |
| 핀 4 | CS — Chip select (active low) |
| 핀 5 | RD — Read input (active low) |
| 핀 6 | CONVST — Conversion start (active high) |
| 핀 7 | BUSY — Busy output (active high during conversion) |
| 핀 8 | DGND — Digital ground |
| 핀 9 | DB0 — Data output bit 0 (LSB) |
| 핀 10 | DB1 — Data output bit 1 |
| 핀 11 | DB2 — Data output bit 2 |
| 핀 12 | DB3 — Data output bit 3 |
| 핀 13 | DB4 — Data output bit 4 |
| 핀 14 | DB5 — Data output bit 5 |
| 핀 15 | DB6 — Data output bit 6 |
| 핀 16 | DB7 — Data output bit 7 |
| 핀 17 | DB8 — Data output bit 8 |
| 핀 18 | DB9 — Data output bit 9 |
| 핀 19 | DB10 — Data output bit 10 |
| 핀 20 | DB11 — Data output bit 11 (MSB) |
| 핀 21 | VDD — Power supply (2.7 V to 5.25 V) |
| 핀 22 | VDD — Power supply (2.7 V to 5.25 V) |
| 핀 23 | NC — Not connected (per datasheet) |
| 핀 24 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
AD7472ARUZ-REEL 적합 용도: 6 애플리케이션s: Industrial Process Control, Portable Battery-Powered Instrumentation, Data Acquisition Systems, Optical Networking Modules, Motor Control Feedback, Medical Instrumentation.
Industrial Process Control
The AD7472ARUZ-REEL's 12-bit resolution at 1.5 MSPS makes it well suited to industrial process-control loops where a sensor signal must be digitised at high speed and routed to a microcontroller. Its wide 2.7 V to 5.25 V input range lets the converter ride on the same 24 V-derived 5 V analog rail that powers the front-end signal conditioning. The 3.34 mW typical power at 3 V / 1.5 MSPS keeps board thermal rise low inside enclosed industrial enclosures. The parallel interface provides deterministic latency, which is critical for closed-loop control of pressure, flow, and temperature. The TSSOP-24 footprint and -40C to +85C industrial grade suit harsh factory-floor environments.
추천
Portable Battery-Powered Instrumentation
The AD7472ARUZ-REEL's 3.34 mW typical dissipation at 3 V and 1.5 MSPS makes it a strong fit for handheld multimeters, portable gas analyzers, and battery-powered data loggers where every microwatt matters. The 2.7 V lower supply limit allows direct operation from a single Li-ion cell (3.0 V to 4.2 V) without an LDO, simplifying the power tree. The 1.5 MSPS burst-mode throughput captures transient sensor events while the converter idles at low current between samples. The 24-TSSOP package keeps the analog front end compact, leaving board area for the battery and display.
추천
Data Acquisition Systems
The AD7472ARUZ-REEL provides a single-channel 1.5 MSPS analog front end for medium-speed DAQ boards, particularly when paired with an external analog multiplexer (MUX) that scans multiple channels. The parallel digital bus connects cleanly to FPGAs and DSPs that buffer and post-process the conversion stream. The 12-bit no-missing-codes performance preserves linearity for instrumentation-quality measurements, while the industrial -40C to +85C rating supports laboratory and field-deployed DAQ enclosures. Designers stack two AD7472ARUZ-REEL devices on different analog rails to double channel density without breaking timing margins.
추천
Optical Networking Modules
The AD7472ARUZ-REEL delivers 12-bit, 1.5 MSPS conversion for SFP, XFP, and optical-line-card modules that monitor transmit-power and receive-signal-strength levels in real time. Its small 24-TSSOP package and low 7.97 mW dissipation at 5 V keep thermal load low in sealed optical modules. The parallel interface is compatible with FPGA-based CDR/MAC controllers that already manage a high-speed parallel bus. The 2.7 V to 5.25 V supply range is tolerant of the noisy 3.3 V rails common in optical modules, and the 12-bit resolution resolves the small photodiode voltages typical of laser-bias monitoring loops.
추천
Motor Control Feedback
The AD7472ARUZ-REEL's 1.5 MSPS throughput and parallel interface deliver deterministic phase-current and DC-bus voltage sampling for BLDC and PMSM motor drives. With 12-bit resolution it captures the full current ripple waveform above the PWM fundamental, supporting advanced field-oriented control (FOC) algorithms. The 24-TSSOP package handles the wide 0 V to 5 V analog range needed at the output of current-sense amplifiers after their gain stage. The parallel output bus feeds directly into DSP or FPGA motor controllers without adding serial-interface latency, which is essential for sub-microsecond current-loop update rates.
추천
Medical Instrumentation
The AD7472ARUZ-REEL's 12-bit linearity at 1.5 MSPS suits medical instrumentation front ends such as patient monitors, bedside diagnostic devices, and laboratory analyzers where 12-bit resolution adequately resolves amplified bio-signal voltages. The low 3.34 mW power dissipation at 3 V enables battery-powered portable designs with extended operating time, important for ambulatory patient monitors. The parallel interface provides a clean deterministic conversion-to-DSP path for ECG, SpO2, and temperature front ends. Industrial temperature grade and lead-free / RoHS-compliant assembly support modern medical device certification.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD7472ARUZ-REEL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD7472ARUZ-REEL7 | AD7472ARU-REEL7 | AD7472ARUZ | AD7470ARUZ-REEL | AD7470ARUZ-REEL7 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-TSSOP (RU-24) | 24-TSSOP (RU-24) - same | 24-TSSOP (RU-24) - same | 24-TSSOP (RU-24) - same | 24-TSSOP (RU-24) - same | 24-TSSOP (RU-24) - same |
| Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 10 bits | 10 bits |
| Sampling Rate | 1.5 MSPS | 1.5 MSPS | 1.5 MSPS | 1.5 MSPS | 1.75 MSPS | 1.75 MSPS |
| Number of Channels | 1 | 1 | 1 | 1 | 1 | 1 |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Data Interface | Parallel | Parallel | Parallel | Parallel | Parallel | Parallel |
| Lead-Free / RoHS | Yes (Z suffix) | Yes (Z suffix) | No (legacy Pb) | Yes (Z suffix) | Yes (Z suffix) | Yes (Z suffix) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
주요 차별점
- Highest throughput in AD747x family (vs AD7470ARUZ-REEL)
- Lead-free RoHS-compliant assembly (vs AD7472ARU-REEL7)
- Standard 13-inch reel packaging (vs AD7472ARUZ-REEL7)
설계 노트
Estimated: the AD7472ARUZ-REEL draws about 3.34 mW typical at 3 V and 1.5 MSPS, and 7.97 mW at 5 V and 1.5 MSPS, both with VDD-only current (no external analog load). Place a 100 nF X7R ceramic decoupling capacitor within 5 mm of the VDD pin and add a bulk 10 uF tantalum or ceramic capacitor on the supply rail. Avoid running digital traces parallel to and under the analog input traces to minimise switching noise coupling into the input.
Do not apply a reference voltage above VDD on the VREF pin or above 0 V to AVREF; both can permanently damage the device. The BUSY pin remains HIGH during conversion, so the host must wait for BUSY to fall before reading DB0-DB11. Driving CS high during conversion aborts the conversion cycle, which can leave internal capacitors in an undefined state - always allow a full conversion cycle to complete before resetting the part.
For best THD and SNR performance, the analog input trace should be short and guarded by a ground plane on both sides, with the AGND pin star-grounded to the analog ground plane and DGND kept separate from AGND except at one common point near the ADC. Add a small RC low-pass filter (typically 10 ohm + 100 pF) on the analog input if the source impedance is above 50 ohm. The TSSOP-24 exposed pad (if present) should be soldered to the analog ground plane to provide a thermal path.
Estimated: the parallel digital bus (DB0-DB11) outputs settle in less than one clock period, but if the bus is loaded with high capacitance (more than 50 pF total) or connected to a long PCB trace, add 22-33 ohm series damping resistors at each output. Drive the parallel bus directly into an FPGA or DSP GPIO bank, not a long ribbon cable, to avoid reflections that would corrupt the conversion result. Use short, matched-length traces for DB0-DB11 to keep the digital switching edge rates aligned.
규정 준수 정보
The 'Z' suffix in AD7472ARUZ-REEL denotes lead-free RoHS-compliant matte-tin terminations per the Analog Devices package designation guide. Not AEC-Q100 qualified (industrial temperature grade only). Conflict-minerals statement is per the Analog Devices supplier declaration.
