AD7606BSTZ-RL - 16-Bit 8-Ch Simultaneous ADC | Analog Devices
부품 번호: AD7606BSTZ-RL ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.8 | $168.00 |
| 100 | $14.2 | $1,420.00 |
| 500 | $12.9 | $6,450.00 |
| 1,000 | $11.6 | $11,600.00 |
AD7606BSTZ-RL 개요
A data acquisition system (DAS) is a complete signal chain that conditions, samples, and converts analog signals into digital data for processing. The AD7606 integrates the entire front-end, eliminating the need for external op-amps, references, and antialiasing filters, thereby reducing board space and design complexity. As a simultaneous sampling ADC, it captures all channels at the same instant, which is critical for applications requiring phase-accurate measurements across multiple inputs.
Key features include a 200 kSPS throughput rate per channel, 16-bit resolution with no missing codes, and a 2.5 V internal reference with ±1% accuracy. The device offers both serial (SPI/QSPI/MICROWIRE) and parallel interfaces, and supports daisy-chaining for multiple devices. The flexible digital filter can be configured to improve noise performance, and the analog input clamp protects against overvoltage conditions up to ±16.5 V.
The AD7606 uses a charge redistribution SAR architecture, which provides excellent linearity and low power consumption. The integrated antialiasing filter simplifies external filtering requirements, and the track-and-hold amplifier ensures accurate sampling of fast-changing signals. The device operates over the industrial temperature range of -40°C to +85°C and is available in a 64-lead LQFP package.
Typical applications include power line monitoring, protective relays, motor control, and multi-phase energy measurement. The simultaneous sampling capability ensures accurate phase relationships between channels, which is essential for power quality analysis. The device is also suitable for vibration analysis and other multi-channel data acquisition systems.
When designing with the AD7606, ensure that the analog input range is properly configured via the RANGE pin, and that the reference decoupling capacitor is placed close to the REFIN/REFOUT pin. The digital interface should be matched to the host processor's voltage level, and the AVCC and DVCC supplies should be decoupled with 0.1 µF and 10 µF capacitors.
드롭인 대체품: AD7606BSTZ-RL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD7606BSTZ-RL (동일 폼 팩터 및 풋프린트) — 차이점: Input Type, Number of Channels, Antialiasing Filter, Input Voltage Range, Resolution.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
AD7606BSTZ-4RL
✅ 드롭인✓ 재고 있음
$9.55 / 개
데이터시트 보기 →AD7606BSTZ-6RL
✅ 드롭인✓ 재고 있음
$29.8 / 개
데이터시트 보기 →AD7606BSTZ
✅ 드롭인✓ 재고 있음
$16.9 / 개
데이터시트 보기 →ADS8588S
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
GX7606
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD7606BSTZ-RL 최대 정격 & 전기적 특성
| 분해능 | 16 bit |
| Number of Channels | 8 |
| 샘플링 속도 | 200 kSPS per channel |
| Input Type | Bipolar, single-ended |
| 입력 전압 범위 | ±5 V, ±10 V |
| 인터페이스 | Parallel, SPI, QSPI, MICROWIRE, DSP |
| 공급 전압 | 5 V (AVCC), 2.3 V to 5 V (VDRIVE) |
| Internal Reference | 2.5 V, ±1% accuracy |
| Analog Input Impedance | 1 MΩ |
| Antialiasing Filter | Second-order |
| Input Clamp Protection | ±16.5 V |
| 동작 온도 범위 | -40°C to +85°C |
| 패키지 | 64-LQFP (10x10 mm) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
AD7606BSTZ-RL 핀 구성
| 핀 1 | AVCC — Analog supply voltage, 5 V |
| 핀 2 | V1 — Analog input channel 1 |
| 핀 3 | V2 — Analog input channel 2 |
| 핀 4 | V3 — Analog input channel 3 |
| 핀 5 | V4 — Analog input channel 4 |
| 핀 6 | V5 — Analog input channel 5 |
| 핀 7 | V6 — Analog input channel 6 |
| 핀 8 | V7 — Analog input channel 7 |
| 핀 9 | V8 — Analog input channel 8 |
| 핀 10 | AGND — Analog ground |
| 핀 11 | RANGE — Input range select: 0 = ±5 V, 1 = ±10 V |
| 핀 12 | REFOUT/REFIN — Reference output/input, 2.5 V |
| 핀 13 | REFGND — Reference ground |
| 핀 14 | DVCC — Digital supply voltage |
| 핀 15 | VDRIVE — Digital interface supply voltage |
| 핀 16 | DGND — Digital ground |
| 핀 17 | CS — Chip select (active low) |
| 핀 18 | SCLK — Serial clock input |
| 핀 19 | DOUTA — Serial data output A |
| 핀 20 | DOUTB — Serial data output B |
| 핀 21 | BUSY — Busy output, indicates conversion in progress |
| 핀 22 | CONVST A — Conversion start A |
| 핀 23 | CONVST B — Conversion start B |
| 핀 24 | RESET — Reset input (active high) |
| 핀 25 | OS0 — Oversampling mode select 0 |
| 핀 26 | OS1 — Oversampling mode select 1 |
| 핀 27 | OS2 — Oversampling mode select 2 |
| 핀 28 | PAR/SER — Parallel/serial interface select |
| 핀 29 | STBY — Standby mode input |
| 핀 30 | DB0 — Parallel data bus bit 0 |
| 핀 31 | DB1 — Parallel data bus bit 1 |
| 핀 32 | DB2 — Parallel data bus bit 2 |
| 핀 33 | DB3 — Parallel data bus bit 3 |
| 핀 34 | DB4 — Parallel data bus bit 4 |
| 핀 35 | DB5 — Parallel data bus bit 5 |
| 핀 36 | DB6 — Parallel data bus bit 6 |
| 핀 37 | DB7 — Parallel data bus bit 7 |
| 핀 38 | DB8 — Parallel data bus bit 8 |
| 핀 39 | DB9 — Parallel data bus bit 9 |
| 핀 40 | DB10 — Parallel data bus bit 10 |
| 핀 41 | DB11 — Parallel data bus bit 11 |
| 핀 42 | DB12 — Parallel data bus bit 12 |
| 핀 43 | DB13 — Parallel data bus bit 13 |
| 핀 44 | DB14 — Parallel data bus bit 14 |
| 핀 45 | DB15 — Parallel data bus bit 15 |
| 핀 46 | RD — Read strobe (active low) |
| 핀 47 | WR — Write strobe (active low) |
| 핀 48 | A0 — Address bit 0 |
| 핀 49 | A1 — Address bit 1 |
| 핀 50 | A2 — Address bit 2 |
| 핀 51 | A3 — Address bit 3 |
| 핀 52 | A4 — Address bit 4 |
| 핀 53 | A5 — Address bit 5 |
| 핀 54 | A6 — Address bit 6 |
| 핀 55 | A7 — Address bit 7 |
| 핀 56 | A8 — Address bit 8 |
| 핀 57 | A9 — Address bit 9 |
| 핀 58 | A10 — Address bit 10 |
| 핀 59 | A11 — Address bit 11 |
| 핀 60 | A12 — Address bit 12 |
| 핀 61 | A13 — Address bit 13 |
| 핀 62 | A14 — Address bit 14 |
| 핀 63 | A15 — Address bit 15 |
| 핀 64 | EP — Exposed pad, connect to ground |
일반적인 애플리케이션
AD7606BSTZ-RL 적합 용도: 6 애플리케이션s: Power Line Monitoring, Motor Control, Multi-Phase Energy Measurement, Protective Relays, Vibration Analysis, Data Acquisition Systems.
Power Line Monitoring
The AD7606BSTZ-RL is ideal for power line monitoring due to its 8-channel simultaneous sampling capability, which ensures accurate phase relationships between voltage and current channels. The 16-bit resolution and 200 kSPS sampling rate allow precise measurement of harmonics and power quality parameters. The integrated antialiasing filter and input clamp protection simplify the front-end design, making it a complete solution for energy metering and power quality analyzers.
추천
Motor Control
The AD7606BSTZ-RL is well-suited for motor control applications. Its simultaneous sampling of multiple current and voltage channels enables accurate vector control and protection. The 16-bit resolution and 200 kSPS rate provide sufficient bandwidth for high-speed motor drives. The integrated features reduce component count and design complexity, making it a compact solution for variable frequency drives and servo controllers.
추천
Multi-Phase Energy Measurement
The AD7606BSTZ-RL is designed for multi-phase energy measurement, providing simultaneous sampling of all phases to ensure accurate power calculations. The 16-bit resolution and 200 kSPS rate allow precise measurement of energy consumption and power quality. The integrated reference and antialiasing filter reduce external component count, making it ideal for smart meters and energy monitoring systems.
추천
Protective Relays
The AD7606BSTZ-RL is suitable for protective relays in power systems, where accurate and simultaneous measurement of voltage and current is critical for fault detection. The 16-bit resolution and 200 kSPS sampling rate provide the speed and accuracy needed for reliable protection. The integrated input clamp protection and antialiasing filter enhance robustness in harsh industrial environments.
추천
Vibration Analysis
The AD7606BSTZ-RL can be used in vibration analysis systems, where multiple accelerometer signals need to be sampled simultaneously to analyze structural health or machinery condition. The 16-bit resolution and 200 kSPS rate capture high-frequency vibration signals with good fidelity. The simultaneous sampling ensures accurate phase relationships between channels, which is essential for modal analysis.
추천
Data Acquisition Systems
The AD7606BSTZ-RL is a complete data acquisition system (DAS) that integrates the entire signal chain, making it ideal for general-purpose multi-channel data acquisition. The 16-bit resolution and 200 kSPS rate provide high accuracy and speed for a wide range of applications. The flexible digital interface and daisy-chain capability allow easy integration into larger systems.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD7606BSTZ-RL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD7606BSTZ-4RL | AD7606BSTZ-6RL | ADS8588S | GX7606 |
|---|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | GXSC |
| Number of Channels | 8 | 4 | 6 | 8 | 8 |
| Sampling Rate | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS | 200 kSPS |
| Input Voltage Range | ±5 V, ±10 V | ±5 V, ±10 V | ±5 V, ±10 V | ±5 V, ±10 V | ±5 V, ±10 V |
| Interface | Parallel, SPI, QSPI, MICROWIRE | Parallel, SPI, QSPI, MICROWIRE | Parallel, SPI, QSPI, MICROWIRE | Parallel, SPI | Parallel, SPI |
| Internal Reference | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Supply Voltage | 5 V (AVCC), 2.3-5 V (VDRIVE) | 5 V (AVCC), 2.3-5 V (VDRIVE) | 5 V (AVCC), 2.3-5 V (VDRIVE) | 5 V (AVCC), 2.3-5 V (VDRIVE) | 5 V (AVCC), 2.3-5 V (VDRIVE) |
주요 차별점
- 8-channel simultaneous sampling (vs AD7606BSTZ-4RL)
- Pin-to-pin compatible with TI ADS8588S (vs ADS8588S)
- Integrated analog input clamp protection (vs GX7606)
설계 노트
The AD7606BSTZ-RL requires a clean 5 V analog supply (AVCC) and a separate digital supply (VDRIVE) from 2.3 V to 5 V. Decouple AVCC and DVCC with 0.1 µF and 10 µF capacitors placed close to the pins. The internal reference (REFOUT/REFIN) should be decoupled with a 1 µF capacitor to ground to ensure stability and low noise.
Place the AD7606BSTZ-RL on a PCB with a solid ground plane. The exposed pad (EP) must be soldered to the ground plane for proper thermal and electrical performance. Keep analog and digital grounds separate and connect them at a single point. Route analog inputs away from digital traces to minimize noise coupling.
Ensure the RANGE pin is set correctly for the desired input voltage range (±5 V or ±10 V). Incorrect setting can lead to clipping or damage. Also, the CONVST A and CONVST B pins must be triggered simultaneously for true simultaneous sampling. Avoid floating unused digital inputs; tie them to appropriate logic levels.
규정 준수 정보
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified. REACH compliance assumed based on ADI policy.
