Analog Devices

AD9559BCPZ - Dual PLL 1.25GHz Clock Translator | Analog Devices

부품 번호: AD9559BCPZ ✓ 활성
Ethernet, SONET/SDH Rds(on) 72-lead LFCSP-VQ Package 1.25 GHz Speed
MOQ: 1 |

AD9559BCPZ 개요

The Analog Devices AD9559BCPZ is a dual-PLL, adaptive clock translator that provides jitter cleanup and synchronization for synchronous optical and multiservice line-card systems. It accepts up to four external clock inputs, generates one synchronized clock output, supports a maximum output frequency of 1.25 GHz, and is packaged in a 72-lead LFCSP-VQ measuring 10 mm by 10 mm.

An adaptive clock translator belongs to the clock and timing IC hierarchy, where it sits above ordinary clock buffers and below complete frequency synthesizers. Its purpose is to recover a low-jitter reference clock from multiple noisy or discontinuous sources and present a stable, phase-aligned output to the line card. This makes the AD9559 suitable for synchronization architectures that must tolerate reference switching while preserving a consistent downstream timing relationship.

The principal features of the AD9559 include two internal PLLs, four external inputs, one output, a low loop bandwidth, and support for synchronization across Ethernet, SONET, and SDH systems. The low loop bandwidth is significant because it filters input jitter rather than passing much of the reference disturbance through to the output. The multiple-input architecture also allows a system to switch among primary and backup clock sources without immediately losing synchronization.

Operationally, the device acts as an adaptive cleanup and translation stage rather than a conventional frequency synthesizer. A recovered reference is routed through the internal PLL and timing paths to produce a clean, synchronized output. The ADI Data Sheet, Rev. D, identifies the part as recommended for new designs and describes it as a dual-PLL, quad-input, multiservice line-card adaptive clock translator. Its 72-lead surface-mount package provides the mixed-signal and high-speed clock connections required in a multilayer PCB design.

Typical uses include Ethernet line cards, SONET/SDH transport systems, multiservice equipment, Stratum clock generation, synchronization networks, and test-and-measurement equipment. The device is particularly useful where a clean reference must be recovered from several inputs or where reference transfer between redundant clock sources must not create excessive output jitter.

PCB implementation requires careful treatment of the clock inputs, PLL reference connections, supply rails, and exposed thermal pad. Route clock inputs as short, controlled-impedance traces, keep the analog supply and reference components close to their associated pins, and provide a low-impedance ground return for the package. Verify differential clock amplitude, input slew rate, output jitter, and loop stability against the system timing budget before releasing the layout.

This page consolidates the device function, package and clocking characteristics, application guidance, comparison parameters, and practical PCB considerations to support clock-tree architecture decisions. It also identifies where the AD9559 fits relative to other ADI clock translators and outlines the engineering checks required before substituting any device in a synchronization design.

드롭인 대체품: AD9559BCPZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

AD9559BCPZ 사양

Product Type Adaptive Clock Translator
Architecture Dual PLL
Number of External Inputs 4 inputs
출력 수 1 output
Maximum Output Frequency 1.25 GHz
Loop Bandwidth Low loop bandwidth
Supported Network Standards Ethernet, SONET/SDH
Package Type 72-lead LFCSP-VQ
Package Dimensions 10 mm x 10 mm
실장 유형 Surface Mount
Clock Function Jitter cleanup and synchronization
Input Reference Selection Up to 4 external input references
Output Clock Type Synchronized single output
Data Sheet Revision Rev. D
Lifecycle Recommendation Recommended for new designs

AD9559BCPZ 10 mm x 10 mm 핀 구성 가이드

AD9559BCPZ(10 mm x 10 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

AD9559BCPZ의 10 mm x 10 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD9559BCPZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD9559BCPZ 적합 용도: 6 애플리케이션s: Ethernet Line-Card Clocking, SONET and SDH Synchronization, Multiservice Line-Card Timing, Stratum Clock and Frequency Translation, Redundant Reference Failover, Precision Test and Measurement Timing.

🌐

Ethernet Line-Card Clocking

The AD9559BCPZ fits Ethernet line cards that must recover a stable timing reference before it reaches transmit or receive datapaths. Its four external inputs support primary and backup reference selection, while the low-loop-bandwidth PLL path filters jitter and maintains a controlled output relationship. The single 1.25 GHz maximum output is appropriate for a dedicated synchronization stage rather than a general-purpose fanout. During reference transfer, evaluate phase step, output settling time, and downstream tolerance against the Ethernet timing budget before finalizing the clock topology.

📡

SONET and SDH Synchronization

The AD9559BCPZ is designed for synchronization systems associated with SONET and SDH transport equipment, where accumulated reference jitter can degrade recovered timing. By cleaning and synchronizing a selected reference, the device provides a controlled clock for downstream timing recovery circuits. Its four-input architecture permits the board to monitor and switch between clock sources. The key qualification step is to reproduce the intended input frequency, loop setting, and output division at the required system jitter level rather than relying only on headline frequency ratings.

🖥️

Multiservice Line-Card Timing

A multiservice line card can place the AD9559BCPZ ahead of multiple timing-consuming circuits to create one clean synchronization source. The four reference inputs support source diversity, and the low-loop-bandwidth architecture reduces reference noise that would otherwise appear at the output. Because the device provides one output, downstream fanout must be implemented with suitable clock drivers whose additive jitter stays within the line-card budget. Validate reference-transfer steps and loss-of-reference recovery with the exact downstream receiver characteristics.

🕰️

Stratum Clock and Frequency Translation

The AD9559BCPZ is appropriate for Stratum-oriented clock and frequency-translation functions that require synchronization among several incoming references. It accepts up to four external sources, uses two PLLs, and delivers one synchronized clock of up to 1.25 GHz. This arrangement allows redundant reference inputs to be combined into a stable downstream timing source without exposing each circuit to independent reference variation. Confirm the supported reference frequencies, output drive level, and loop stability conditions in the AD9559 Data Sheet, Rev. D, for the intended Stratum topology.

🏭

Redundant Reference Failover

The AD9559BCPZ is well suited to systems that require the output clock to remain controlled while the incoming reference changes. Up to four references can be presented to the device, allowing a primary source and backup sources to share one cleanup path. The low-loop-bandwidth PLL behavior is central to this use because it limits the amount of reference disturbance passed toward the output. Design the selection state machine and loss-of-reference behavior around the device’s documented operating modes, and test reference phase steps at the system level.

📺

Precision Test and Measurement Timing

The AD9559BCPZ can provide clean, synchronized timing for test and measurement equipment that must compare traces across multiple acquisition channels. By cleaning an external reference before distribution, it reduces phase disturbance caused by a noisy or switched source. The single-output architecture requires a separate low-jitter fanout stage when several instruments need the same clock. Use the manufacturer’s jitter characterization and loop-bandwidth guidance to establish whether the AD9559’s cleanup capability fits the required measurement uncertainty and phase-noise floor.

추천 제품 요약

AD9559BCPZ Analog Devices 사용처: Ethernet Line-Card Clocking, SONET and SDH Synchronization, Multiservice Line-Card Timing, Stratum Clock and Frequency Translation, Redundant Reference Failover, Precision Test and Measurement Timing AD9554BCPZ Related ADI clock-translator family device 사용처: Ethernet Line-Card Clocking, SONET and SDH Synchronization, Multiservice Line-Card Timing, Stratum Clock and Frequency Translation, Precision Test and Measurement Timing AD9559BCPZ-REEL7 Same AD9559BCPZ device in a reel ordering format 사용처: Redundant Reference Failover
What is the AD9559BCPZ used for?
The AD9559BCPZ is a dual-PLL adaptive clock translator used for jitter cleanup and clock synchronization in Ethernet, SONET/SDH, and multiservice line-card equipment. It accepts up to four external clock inputs and provides one synchronized output at up to 1.25 GHz. According to the Analog Devices AD9559 Data Sheet, Rev. D, its low loop bandwidth and multiple-reference capability suit systems that require a stable clock while switching among primary or backup sources.
How many clock inputs and outputs does the AD9559BCPZ provide?
The AD9559BCPZ provides four external clock inputs, one output, and two internal PLLs. The quad-input arrangement supports reference selection and failover, while the dual-PLL architecture supports jitter cleanup and synchronization. The Analog Devices product page describes the device as a dual-PLL, quad-input, multiservice line-card adaptive clock translator, and the AD9559 Data Sheet, Rev. D, identifies its maximum output frequency as 1.25 GHz.
Where can I download the AD9559BCPZ datasheet PDF?
The official AD9559 product page is the primary place to obtain the AD9559 Data Sheet, Rev. D, along with ordering information and supporting documentation. It is linked from the Analog Devices AD9559 product page at https://www.analog.com/en/products/ad9559.html. The package variant AD9559BCPZ is covered by the AD9559 family documentation, so engineers should use the family document and then verify the specific order code, temperature range, and package options against the product-selection table.
Where can I find the AD9559BCPZ pinout?
The AD9559BCPZ pin assignment and exposed-pad connection details appear in the Pin Configuration and Pin Description sections of the Analog Devices AD9559 Data Sheet, Rev. D. Use that table when assigning all 72 LFCSP-VQ connections and when connecting the exposed thermal pad. The complete 72-pin mapping is not reproduced here; use the manufacturer pin-description table directly to avoid errors in power, ground, reference, and high-speed clock routing.
What is the difference between the AD9559BCPZ and AD9554BCPZ?
The AD9559BCPZ is a dual-PLL, quad-input adaptive clock translator with one output and a 1.25 GHz maximum output frequency, while the AD9554BCPZ belongs to a different ADI clock-translator configuration. Both devices appear in the AD9559 versus AD9554 comparison material, but a substitute must match the original PCB footprint, reference interface, output drive, supply arrangement, and timing performance. Do not treat the shared package family as proof of automatic pin compatibility.
What is the best drop-in replacement for the AD9559BCPZ?
The closest confirmed replacement is the identical AD9559BCPZ device order code when it is sourced as a new, traceable part. The AD9559BCPZ-REEL7 listing identifies the same electrical device in a different reel presentation, but it is not a distinct functional substitute and can complicate procurement traceability. Before approving any other clock translator, compare its 72-lead footprint, pin mapping, PLL architecture, reference input range, jitter performance, and supply requirements against the AD9559 Data Sheet, Rev. D.
When should I choose the AD9559BCPZ instead of another clock translator?
Choose the AD9559BCPZ when the design requires several external references, adaptive selection or failover, jitter cleanup, and a synchronized output for Ethernet, SONET/SDH, or Stratum-related equipment. It is a specialized network-timing device rather than a general-purpose clock generator. Select a different translator when the system needs only a simple buffered reference, requires a fundamentally different PLL architecture, or cannot support the AD9559 input, output, and thermal conditions.
Is the AD9559BCPZ suitable for Ethernet line-card designs?
Yes, the AD9559BCPZ is specifically identified for Ethernet, SONET/SDH, and multiservice line-card clocking. Its four external inputs allow the system to work with multiple reference sources, while the low-loop-bandwidth PLL path cleans the selected reference before producing a synchronized output. This makes it appropriate for line cards that need robust reference failover without allowing excessive reference jitter or phase disturbance to reach downstream circuitry.
How much jitter does the AD9559BCPZ cleanup?
The AD9559 is engineered to reduce input jitter through its low-loop-bandwidth clock-multiplier and adaptive translation architecture, but a single cleanup figure is not meaningful without specifying input frequency, loop setting, and output frequency. Use the jitter-versus-input-frequency and loop-bandwidth curves in the Analog Devices AD9559 Data Sheet, Rev. D, then reproduce the design with the same reference and output conditions. The final system jitter budget must include oscillator noise, interconnect loss, and downstream device contribution.
Does the AD9559BCPZ require an external crystal?
The exact clocking connection depends on the reference architecture and the external components selected for the design. The AD9559 uses PLL-based clock translation, and its reference configuration must follow the application diagrams and pin-description tables in the Analog Devices AD9559 Data Sheet, Rev. D. Confirm whether the selected reference path uses a crystal oscillator, oscillator module, or externally generated clock, and account for the required load capacitors and termination in the component schedule.
How should the 72-lead LFCSP-VQ package be laid out?
Route all clock inputs and the output as short, controlled-impedance traces, and place the PLL loop-support components close to their associated pins. Connect the exposed thermal pad to a low-impedance ground plane with multiple vias while maintaining return paths beneath high-speed signals. Because the package combines a 10 mm by 10 mm footprint with 72 leads, assembly density and via placement require care; follow the Analog Devices land pattern and evaluation-board layout in the AD9559 documentation.
What is the AD9559BCPZ power consumption?
Power consumption depends on the selected supply voltage, output frequency, operating mode, and the internal PLL configuration, so a single fixed value would be misleading. Use the supply-current and power-consumption specifications in the Analog Devices AD9559 Data Sheet, Rev. D, along with the operating-condition tables for the exact AD9559BCPZ temperature grade. Account for regulator headroom and thermal rise at the highest expected output frequency and lowest expected input voltage.
Can the AD9559BCPZ operate with a backup clock reference?
Yes, multiple reference operation is one of the AD9559BCPZ’s principal strengths because the device accepts up to four external clock inputs. A redundant-source design can select between primary and backup clocks while the low-loop-bandwidth translation path maintains a controlled output relationship. The switching criteria, loss-of-reference behavior, and settling expectations must be verified from the AD9559 Data Sheet, Rev. D, and validated against the downstream receiver’s holdover and phase-error limits.
What are the key specifications engineers should know about AD9559BCPZ?
The key AD9559BCPZ specifications are the dual-PLL architecture, four external inputs, one synchronized output, a maximum output frequency of 1.25 GHz, low loop bandwidth, and a 72-lead 10 mm by 10 mm LFCSP-VQ package. The part is intended for Ethernet, SONET/SDH, and multiservice line-card applications. According to the Analog Devices AD9559 Data Sheet, Rev. D, the AD9559 family is also recommended for new designs.
Where can I buy AD9559BCPZ and what is the lead time?
Use the Request a Quote form on this page to request current AD9559BCPZ pricing, stock confirmation, minimum order quantity, and production lead time. The manufacturer lists the AD9559 family as recommended for new designs, but quantity and timing can change with order configuration and market conditions. Provide the exact AD9559BCPZ order code, reel quantity, shipment destination, and target date when submitting the request so the manufacturer can confirm the appropriate supply plan.

엔지니어링 참조 데이터: AD9559BCPZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AD9559BCPZ when the design needs a dedicated jitter-cleanup and synchronization stage with up to four external references, two PLLs, and one synchronized output of up to 1.25 GHz. It is a strong fit for Ethernet, SONET/SDH, multiservice line-card, and Stratum-related clock architectures that benefit from reference selection and controlled source transfer. Select the AD9554BCPZ only after confirming that its reference count, PLL configuration, pin mapping, output range, and supply requirements satisfy the target design. Neither device should be treated as an automatic substitute merely because both are ADI clock translators. For new multiservice line cards, the AD9559 family is the more direct choice because Analog Devices identifies it as recommended for new designs. Before layout release, verify jitter performance, reference-transfer behavior, input slew rate, output drive, thermal conditions, and the exact exposed-pad land pattern.

대체품과의 비교

파라미터 이 제품
Device Type Dual-PLL adaptive clock translator
Brand Analog Devices
Package 72-lead LFCSP-VQ, 10 mm x 10 mm
External Inputs 4 inputs
Outputs 1 output
Maximum Output Frequency 1.25 GHz
PLL Count 2 PLLs
Primary Function Jitter cleanup and synchronization
Target Applications Ethernet, SONET/SDH, multiservice line cards, Stratum timing
Lifecycle Recommendation Recommended for new designs

주요 차별점

  • Quad-input adaptive clock translation (vs AD9554BCPZ)
  • Two-PLL jitter-cleanup architecture (vs AD9554BCPZ)
  • Single synchronized output with 1.25 GHz maximum frequency (vs AD9554BCPZ)
  • Active recommendation for new designs (vs AD9554BCPZ)

설계 노트

Treat the four clock inputs and the output as controlled-impedance nets, and follow the Analog Devices land pattern for the 72-lead LFCSP-VQ package. Place loop-support components and local decoupling close to their assigned pins, keep the exposed pad tied to a low-impedance ground plane with multiple short vias, and verify return paths beneath every high-speed trace. Do not substitute a generic 72-lead land pattern without checking pad dimensions, thermal-pad geometry, and assembly rules.

Characterize each reference source for frequency, amplitude, slew rate, duty-cycle distortion, and jitter before enabling adaptive selection. Reference transfer can create a phase step at the output, so measure settling time and residual jitter with the intended receiver connected. Differential clock integrity depends on return loss, pair symmetry, and loss through the input network, so validate the complete source-to-pin path rather than relying only on generator output specifications.

Use the supply-current and power-dissipation tables in the AD9559 Data Sheet, Rev. D, for the exact frequency, mode, and temperature grade. Estimate junction rise from package thermal resistance and board copper, then confirm that the regulator can supply transient PLL current without disturbing other timing rails. Provide local decoupling at the supply pins and separate sensitive reference connections from noisy switching nodes to preserve the benefit of jitter cleanup.

Do not assume that another ADI clock translator with a related order code is automatically interchangeable. A valid replacement must match the land pattern, exposed-pad connection, pin functions, reference input range, PLL behavior, output drive, and supply levels. Likewise, do not derive a final jitter budget from the 1.25 GHz headline frequency; include reference noise, loop bandwidth, reference-switch phase steps, board loss, and downstream receiver jitter.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The Analog Devices AD9559 family is identified as recommended for new designs. RoHS, REACH, halogen-free, lead-free, and conflict-minerals status should be confirmed for the exact AD9559BCPZ order code using the manufacturer product page and current material-declaration documentation.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD9559BCPZ datasheet AD9559BCPZ pinout AD9559BCPZ datasheet pdf AD9559BCPZ 72-LFCSP-VQ AD9559BCPZ 1.25GHz clock translator AD9559BCPZ dual PLL AD9559BCPZ Ethernet line card AD9559BCPZ SONET SDH synchronization AD9559BCPZ vs AD9554BCPZ AD9559BCPZ equivalent AD9559BCPZ drop-in replacement Analog Devices AD9559BCPZ AD9559BCPZ price AD9559BCPZ stock

관련 부품 & 용어

Analog Devices AD9559BCPZ AD9559BCPZ-REEL7 AD9554BCPZ adaptive clock translator clock multiplier clock generator clock and timing IC phase-locked loop PLL dual PLL jitter cleanup clock synchronization jitter loop bandwidth Ethernet SONET SDH Stratum clock multiservice line card 72-lead LFCSP-VQ surface-mount package exposed thermal pad clock reference failover
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기