Analog Devices

AD9951YSV - 400 MSPS 14-Bit DDS | Analog Devices

부품 번호: AD9951YSV ✓ 활성
1.8 V Vdss 48-lead TQFP-EP, 7 mm × 7 mm Package 400 MSPS Speed
MOQ: 1 |

AD9951YSV 개요

The Analog Devices AD9951YSV is a 400 MSPS, 14-bit direct digital synthesis IC with a 32-bit tuning word, a 1.8 V CMOS supply, and a 48-lead TQFP-EP package measuring 7 mm by 7 mm. It combines a high-speed programmable frequency synthesizer with an integrated 14-bit DAC for digitally controlled waveform generation.

A direct digital synthesizer, or DDS, is a frequency-generation technique in which a digital phase accumulator advances a phase word at a controlled clock rate, and the resulting phase address selects an amplitude value from a lookup table. Unlike a conventional analog local-oscillator chain, a DDS supports digitally programmed frequency, phase, and amplitude adjustments through a serial interface while retaining high frequency stability derived from its reference clock.

The AD9951YSV provides a 400 MSPS internal clock, a 32-bit frequency-tuning word, and a 14-bit output DAC. Its phase noise is specified at -120 dBc/Hz at a 1 kHz offset from the DAC output. Dynamic performance includes greater than 80 dB spurious-free dynamic range at 160 MHz with a 100 kHz offset. Serial I/O controls the device, while an AOUT output provides the analog result. The 1.8 V CMOS architecture supports low-voltage integration with high-speed digital systems.

The internal architecture separates frequency and phase accumulation from the DAC conversion path, allowing the frequency tuning word, phase offset, and amplitude scale factor to be loaded independently. This architecture supports rapid frequency hopping, precise channel selection, and calibrated phase control. An on-chip oscillator can operate with an external crystal connected to the REFCLK and REFCLKB inputs, with a reference-clock range of 20 MHz to 30 MHz specified for that configuration.

Typical applications include communications test equipment, frequency synthesizers, clock-generation modules, digital waveform sources, and local-oscillator subsystems. The device is also appropriate for radar, instrumentation, and phased-array signal chains where digitally controlled phase adjustment improves channel alignment.

When laying out a circuit, treat the reference clock, serial interface, and analog output as separate high-speed paths. Route the exposed-pad thermal connection through the package thermal design, and use a controlled impedance connection for the analog output to avoid reflections or unwanted harmonics.

This page combines device specifications, practical integration guidance, sourcing information, and verified alternatives. It also identifies the electrical and pinout details that should be checked in the manufacturer data sheet before a new PCB layout is released.

드롭인 대체품: AD9951YSV — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

AD9951YSVZ

✅ 드롭인
📦 48-lead TQFP-EP (7 mm × 7 mm)
Same AD9951 function, 400 MSPS clock, 32-bit tuning word, and 14-bit DAC; order-code suffix differs, with electrical and temperature limits requiring confirmation.

📋 참조 대체품 (카탈로그에 없음)

AD9951YSV 사양

Device Type Direct Digital Synthesis IC
Internal Clock Speed 400 MSPS
DAC Resolution 14 bit
Frequency Tuning Word 32 bit
공급 전압 1.8 V
Process Technology 1.8 V CMOS
Phase Noise -120 dBc/Hz at 1 kHz offset, DAC output
Spurious-Free Dynamic Range >80 dB at 160 MHz, ±100 kHz offset
Control Interface Serial I/O
Analog Output AOUT
External Crystal Reference Range 20 MHz to 30 MHz
Reference Clock Inputs REFCLK and REFCLKB
패키지 48-lead TQFP-EP, 7 mm × 7 mm
실장 유형 Surface Mount
Data Sheet Revision Rev. D
New Design Status Recommended for new designs

AD9951YSV 48-lead tqfp-ep, 7 mm × 7 mm 핀 구성 가이드

AD9951YSV(48-lead tqfp-ep, 7 mm × 7 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

AD9951YSV의 48-lead tqfp-ep, 7 mm × 7 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD9951YSV.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD9951YSV 적합 용도: 6 애플리케이션s: Communications Frequency Synthesizer, Digital Waveform and Signal Source, Phased-Array Phase Control, Clock and LO Generation Module, Radar and Signal-Simulation Front End, Industrial Frequency-Control Module.

🌐

Communications Frequency Synthesizer

The AD9951YSV fits communications frequency-generation blocks that require rapid, digitally controlled channel changes. Its 32-bit tuning word provides fine frequency resolution, while the 400 MSPS internal clock supports high-rate phase accumulation. A 32-bit serial interface allows the tuning word, phase offset, and amplitude scale factor to be updated without external RAM. The integrated 14-bit DAC simplifies the analog output path, and the greater than 80 dB SFDR specification at 160 MHz provides useful margin when separating wanted energy from close-in harmonics. Use a low-jitter reference clock and short, isolated reference routing to preserve the specified phase-noise performance.

📡

Digital Waveform and Signal Source

The AD9951YSV can generate calibrated sinusoidal outputs for instrumentation and automated test systems. Programmable frequency, phase, and amplitude control make it suitable for stimulus generation where multiple tones or stepped sweeps must be produced with repeatable settings. The 14-bit DAC provides the analog output directly, while the 400 MSPS clock rate supports high-output-frequency operation. The -120 dBc/Hz phase-noise figure at a 1 kHz offset is relevant when close carrier-to-noise performance matters. Place the AOUT connection behind a controlled-impedance network and calibrate output amplitude at the final load rather than only at the device pin.

✈️

Phased-Array Phase Control

The AD9951YSV is appropriate for phased-array clock and local-oscillator subsystems because each channel can receive a phase-offset command over the serial interface. The 32-bit tuning word supports precise frequency placement, and the independent phase adjustment helps align multiple channels without changing their final output frequencies. The integrated DAC removes one external conversion stage, while the 400 MSPS clocking capability supports demanding modulation schemes. A shared low-noise reference can synchronize multiple devices, but each channel still needs independent serial routing and careful supply isolation. Validate phase accuracy at the antenna or array output because delay through cables, filters, and amplifiers can offset the programmed device setting.

🖥️

Clock and LO Generation Module

The AD9951YSV works well as a programmable local oscillator in clocks, modems, and instrumentation modules. Digital frequency updates allow rapid retuning without mechanically adjustable components, and the serial control interface supports deterministic system configuration. With an external crystal connected to REFCLK and REFCLKB, the reference path can be kept predictable in the 20 MHz to 30 MHz range identified by the manufacturer. The integrated 14-bit output DAC reduces external component count and allows amplitude to be scaled in the digital domain. Use dedicated reference and analog-return routing, and decouple the serial bus from sensitive clock nodes to prevent command-transition coupling.

🏭

Radar and Signal-Simulation Front End

The AD9951YSV can supply a programmable excitation tone for radar and communications signal-simulation systems. The 400 MSPS internal clock enables high-rate frequency synthesis, while the 32-bit tuning word gives engineers fine control over channel spacing. Greater than 80 dB SFDR at 160 MHz helps maintain separation between the intended tone and nearby spurs. Serial phase and amplitude control also supports scenario generation across multiple channels. Because simulator accuracy depends on reference quality, use a low-jitter reference and treat the analog output as a controlled RF signal path. The exposed thermal pad and analog output require careful layout in compact multi-channel equipment.

🔧

Industrial Frequency-Control Module

The AD9951YSV is suitable for industrial controls that require a stable, digitally adjustable excitation or reference signal. The 32-bit tuning word supports fine setting resolution, and the serial interface allows the operating point to be changed from a controller without mechanical adjustment. The integrated DAC makes the output amplitude digitally controllable, which is useful for closed-loop calibration routines. A crystal-referenced configuration can support stable operation across temperature when the crystal and power design are handled correctly. Keep the 1.8 V supply rail quiet, provide the recommended local bypassing, and isolate the AOUT path from digital return currents to avoid injecting modulation products into the controlled signal.

What is the AD9951YSV and what does it do?
The AD9951YSV is a 400 MSPS direct digital synthesizer with an integrated 14-bit DAC and a 32-bit frequency-tuning word. According to the Analog Devices AD9951 data sheet (Rev. D), it generates a digitally programmable analog output from a phase-accumulator and lookup-table architecture. The device accepts serial control data and is intended for frequency synthesis, waveform generation, communications, instrumentation, and phased-array applications.
What are the key specifications of AD9951YSV that engineers should know?
The principal AD9951YSV specifications are a 400 MSPS internal clock, a 32-bit frequency-tuning word, an integrated 14-bit DAC, and a 1.8 V CMOS supply. The Analog Devices data sheet (Rev. D) also specifies -120 dBc/Hz phase noise at a 1 kHz offset and greater than 80 dB SFDR at 160 MHz with a ±100 kHz offset. The device is packaged in a 48-lead TQFP-EP measuring 7 mm by 7 mm.
Where can I download the AD9951YSV datasheet PDF?
The official AD9951YSV data sheet is available from the Analog Devices product documentation as a PDF. The document is identified as the AD9951 400 MSPS 14-Bit 1.8 V CMOS Direct Digital Synthesizer Data Sheet, Rev. D. Use the manufacturer document for the complete pin-description table, electrical characteristics, register definitions, and reference-circuit implementation details.
Where can I find the AD9951YSV pinout?
The AD9951YSV pinout is documented in the pin-description table of the Analog Devices AD9951 data sheet (Rev. D). The device uses a 48-lead TQFP-EP package with an exposed thermal pad. Assign PCB nets directly from the manufacturer table, including the reference-clock inputs, serial interface signals, control inputs, analog output, supply pins, and exposed-pad connection.
What is the difference between AD9951YSV and AD9951YSVZ?
The AD9951YSV and AD9951YSVZ both identify the 400 MSPS, 14-bit AD9951 synthesizer in a 48-lead TQFP-EP package. The suffix distinguishes the manufacturer order configuration rather than changing the stated clock rate, DAC resolution, tuning-word length, or supply voltage. Confirm the exact orderable part against the product-selection table before placing a purchase.
What is the best drop-in replacement for AD9951YSV?
The AD9951YSVZ is the closest documented orderable configuration for the AD9951YSV because it retains the same AD9951 function and 48-lead TQFP-EP package. Before substituting it, verify the order-code suffix, temperature range, and shipping format against your bill of materials. The Request a Quote form on this page can be used to request the current configuration and sourcing status.
Can another manufacturer directly replace the AD9951YSV?
No cross-manufacturer drop-in replacement is established for the AD9951YSV. A true drop-in replacement must match the 48-lead TQFP-EP footprint, pin functions, 1.8 V supply, serial interface, 400 MSPS clocking requirement, and 14-bit DAC behavior. Parts from other suppliers that merely generate similar frequencies or use the same package dimensions should be treated as redesign candidates rather than direct substitutions.
Is the AD9951YSV suitable for a communications frequency source?
The AD9951YSV is suitable for communications frequency-source designs that benefit from digital frequency and phase control. Its 400 MSPS internal clock, 32-bit tuning word, and greater than 80 dB SFDR at 160 MHz support precise channel selection. The serial interface also enables rapid frequency hopping, while the integrated 14-bit DAC removes the need for a separate output converter.
When should I choose the AD9951YSV instead of a conventional DDS?
Choose the AD9951YSV when your design needs a high-speed DDS, a 32-bit tuning word, an integrated 14-bit DAC, and serial programming in one device. It is particularly useful where frequency or phase must change rapidly and repeatedly. A conventional DDS solution may be preferable only when a different DAC architecture, output resolution, control interface, or lower operating rate is required.
What reference clock should I use with the AD9951YSV?
The AD9951YSV can use an external crystal when the on-chip oscillator is enabled, with the crystal connected to the REFCLK and REFCLKB inputs. The Analog Devices data sheet identifies a 20 MHz to 30 MHz reference-clock range for this configuration. Keep the reference path short, use a clean return connection, and follow the recommended crystal and load-component arrangement.
How does the 1.8 V supply requirement affect AD9951YSV PCB design?
The 1.8 V CMOS supply requires a low-voltage distribution network with short decoupling paths at the device. Place the recommended bypass capacitors at the associated supply and ground pins, keep high-current return paths away from sensitive reference and analog nodes, and provide a solid thermal plane around the exposed pad. Confirm decoupling values and pin assignments in the manufacturer data sheet before layout release.
What thermal precautions are required for the TQFP-EP package?
The AD9951YSV package includes an exposed thermal pad that must be connected to the PCB ground plane with multiple thermal vias. This pad provides the principal path for removing internal heat. Keep the thermal-via pattern unobstructed, use an adequate copper area, and avoid placing thermally isolated components directly beneath the device when the operating temperature or DAC output activity is high.
Where can I buy AD9951YSV online?
Use the Request a Quote form on this page to request AD9951YSV pricing, current availability, lead time, and minimum order quantity. The form allows the exact 48-lead TQFP-EP order configuration to be confirmed before a purchase order is issued. Availability and delivery timing can change, so request the current commitment rather than relying on an archived listing.
What is the price of AD9951YSV?
Current commercial terms for the AD9951YSV are provided through the Request a Quote form on this page. The form can return quantity pricing, stock status, lead time, and packaging information for the exact orderable MPN. Pricing changes with volume, market conditions, and order configuration, so use the form rather than a historical price reference for budgeting.
Is AD9951YSV in stock and what is the lead time?
Current stock and lead time for the AD9951YSV should be confirmed through the Request a Quote form on this page. Supply status varies with order quantity, package configuration, and procurement schedule. The form provides the fastest route for obtaining a dated availability and delivery response for the exact 48-lead TQFP-EP part.

엔지니어링 참조 데이터: AD9951YSV — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AD9951YSV when a design requires a 400 MSPS DDS with a 32-bit tuning word, integrated 14-bit DAC, and serial programming in a 48-lead TQFP-EP package. It is a strong fit for communications test equipment, programmable local oscillators, radar stimulus sources, and phased-array subsystems where rapid frequency or phase changes are valuable. The AD9951YSVZ is the closest documented order configuration when it matches your procurement requirements, but confirm temperature and order-code details before substituting it. No verified cross-manufacturer part qualifies as a direct drop-in replacement because matching a 48-lead footprint alone does not establish functional compatibility. If a different output resolution, serial interface, supply voltage, or DAC topology is mandatory, treat competing DDS devices as redesign candidates rather than pin-compatible alternatives.

대체품과의 비교

파라미터 이 제품 AD9951YSVZ
Package 48-lead TQFP-EP (7 mm × 7 mm) 48-lead TQFP-EP (7 mm × 7 mm)
Brand Analog Devices Analog Devices
Internal Clock Speed 400 MSPS 400 MSPS
DAC Resolution 14 bit 14 bit
Frequency Tuning Word 32 bit 32 bit
Supply Voltage 1.8 V 1.8 V
Phase Noise -120 dBc/Hz at 1 kHz offset, DAC output -120 dBc/Hz at 1 kHz offset, DAC output
Spurious-Free Dynamic Range >80 dB at 160 MHz, ±100 kHz offset >80 dB at 160 MHz, ±100 kHz offset
Control Interface Serial I/O Serial I/O
Analog Output AOUT AOUT

주요 차별점

  • Combines high-speed synthesis and conversion in one device (vs AD9951YSVZ)
  • High-frequency dynamic performance (vs AD9951YSVZ)
  • Direct digital control of frequency, phase, and amplitude (vs AD9951YSVZ)

설계 노트

Separate the reference clock, digital serial interface, and analog output into distinct layout zones. Keep the REFCLK and REFCLKB connections short and symmetrical, route SCLK away from AOUT, and provide a continuous ground reference beneath the device. Place local decoupling at the 1.8 V supply pins and use the exposed pad as both the electrical ground connection and primary thermal path.

The exposed thermal pad must be soldered to a PCB ground plane and connected with multiple thermal vias. Keep the via field free of voids where practical, and provide enough copper area to spread heat from the DAC and digital sections. Because maximum output conditions can increase internal dissipation, evaluate the board temperature rise in the final enclosure rather than relying on a copper-pad area calculation alone.

Treat AOUT as a high-speed analog signal and route it over a continuous reference plane with a controlled impedance and the shortest practical path. Terminate according to the intended output topology, avoid stubs, and keep switching nodes and the serial clock away from the output. Calibrate amplitude and phase at the connector or load so that PCB and cable delay do not obscure the programmed DDS setting.

Do not substitute an alternative solely because it uses a 48-lead TQFP package. The replacement must match pin functions, 1.8 V I/O levels, reference-clock arrangement, serial protocol, DAC characteristics, and thermal requirements. When changing between AD9951 order-code suffixes, verify the product-selection table and temperature grade, then confirm the device identifier and register behavior during hardware bring-up.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, and conflict minerals were not identified in the device documentation reviewed for this page.

관련 검색

AD9951YSV datasheet AD9951YSV specifications AD9951YSV pinout AD9951YSV datasheet PDF Analog Devices AD9951YSV AD9951YSV 400 MSPS DDS AD9951YSV 48 TQFP EP package AD9951YSV frequency synthesizer AD9951YSV phase noise AD9951YSV vs AD9951YSVZ AD9951YSV drop-in replacement AD9951YSV equivalent AD9951YSV price AD9951YSV stock AD9951YSV reference clock circuit

관련 부품 & 용어

Analog Devices AD9951YSV AD9951YSVZ AD9951 direct digital synthesizer DDS frequency synthesizer phase accumulator lookup table frequency-tuning word phase noise spurious-free dynamic range SFDR 14-bit DAC 400 MSPS internal clock 1.8 V CMOS serial I/O AOUT REFCLK REFCLKB 48-lead TQFP-EP exposed thermal pad communications test equipment phased-array signal generation frequency hopping
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기