Analog Devices

ADF4360-7BCPZRL - 1.8 GHz Integer-N VCO | Analog Devices

부품 번호: ADF4360-7BCPZRL ✓ 활성
3.6 V Vdss 24-lead WFQFN with exposed pad Package 350 MHz to 1800 MHz Speed
MOQ: 1 |

ADF4360-7BCPZRL 개요

The Analog Devices ADF4360-7BCPZRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator with a 1.8 GHz center frequency, programmable RF output, and a 24-lead WFQFN exposed-pad package. The device uses external inductors to establish its operating frequency range and supports an integer-N architecture for stable, programmable RF generation.

An integer-N synthesizer is a phase-locked-loop device that combines a frequency divider, phase detector, charge pump, loop filter, and voltage-controlled oscillator to produce an output frequency locked to a reference source. The ADF4360-7 belongs to the broader hierarchy of frequency synthesizer, clock and timing IC, phase-locked loop, and RF signal-generation semiconductor. Integrating the synthesizer and VCO reduces the number of high-frequency discrete components required in the RF signal chain.

The ADF4360-7 covers a 350 MHz to 1800 MHz center-frequency range when configured with external inductors. Its divide-by-2 output option provides frequencies from 175 MHz to 900 MHz. Additional documented functions include a three-wire serial interface, programmable output power, digital lock detect, and hardware or software power-down control, making the device suitable for systems that need controllable RF output and efficient power management.

The RF architecture operates from a 3.6 V supply and supports 1.8 V logic compatibility. These characteristics suit equipment using modern low-voltage control systems while retaining the voltage headroom required by the integrated VCO and synthesizer. External inductors determine the center frequency and are therefore a central part of frequency planning rather than optional power inductors.

Typical uses include local oscillator generation for wireless receivers and transmitters, RF down-conversion, test and measurement instrumentation, industrial RF control, and communications equipment operating below 1.8 GHz. The divide-by-2 function is particularly useful when a lower output is required without implementing a separate output divider stage.

PCB design requires careful treatment of the 24-WFQFN exposed pad, supply decoupling, grounding, and the external VCO inductors. The exposed pad must be connected to the ground plane with a low-impedance thermal and electrical path. The reference, serial interface, and RF output routing should also follow the layout guidance in the manufacturer datasheet.

This product data combines the ADF4360-7 operating ranges, package information, pin-compatible family references, and practical implementation guidance to support RF architecture selection, PCB planning, and replacement decisions.

드롭인 대체품: ADF4360-7BCPZRL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADF4360-7BCPZRL (동일 폼 팩터 및 풋프린트) — 차이점: Package, Synthesizer Architecture, Power-Down Modes, Product Type, Device Type.

Analog Devices
Package: 24-lead LFCSP with exposed pad
Synthesizer Architecture: Integer-N PLL
Product Type: Integer-N frequency synthesizer with integrated VCO
비교 대상: ADF4360-7BCPZRL →
Analog Devices
Package: 24-terminal WFQFN exposed-pad CSP
Power-Down Modes: Hardware and software power-down
Device Type: Fully integrated integer-N synthesizer and voltage-controlled oscillator
비교 대상: ADF4360-7BCPZRL →
Analog Devices
Package: 24-lead LFCSP with exposed pad
Product Type: Integrated integer-N frequency synthesizer and voltage-controlled oscillator
비교 대상: ADF4360-7BCPZRL →
Analog Devices
Package: 24-lead LFCSP with exposed pad
Product Type: Integer-N frequency synthesizer with integrated VCO
비교 대상: ADF4360-7BCPZRL →

ADF4360-4BCPZRL7

✅ 드롭인
📦 24-lead WFQFN exposed pad
Nominal center frequency is 1.75 GHz versus 1.8 GHz, a 50 MHz or 2.8% difference; external inductor and register values require validation.

📋 참조 대체품 (카탈로그에 없음)

ADF4360-7BCPZRL 사양

Device Type Integrated integer-N synthesizer and voltage-controlled oscillator
Center Frequency Range 350 MHz to 1800 MHz
Maximum Center Frequency 1800 MHz
Divide-by-2 Output Range 175 MHz to 900 MHz
Nominal Center Frequency 1800 MHz
Synthesizer Architecture Integer-N
VCO Inductor Selection External
공급 전압 3.6 V
Logic Compatibility 1.8 V
Serial Interface 3-wire
Output Power Programmable
Lock Detect Digital
Power-Down Modes Hardware and software
패키지 24-lead WFQFN with exposed pad
핀 수 24 pins
실장 유형 Surface mount
동작 온도 범위 -40 °C to +85 °C

ADF4360-7BCPZRL 24-lead wfqfn with exposed pad 핀 구성 가이드

ADF4360-7BCPZRL(24-lead wfqfn with exposed pad 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ADF4360-7BCPZRL의 24-lead wfqfn with exposed pad 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADF4360-7BCPZRL.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADF4360-7BCPZRL 적합 용도: 6 애플리케이션s: Wireless Receiver Local Oscillator, Wireless Transmitter RF Upconversion, RF Downconversion, RF Test and Measurement, Industrial RF Control, Frequency Calibration Equipment.

🌐

Wireless Receiver Local Oscillator

The ADF4360-7BCPZRL can generate the local-oscillator signal used by a wireless receiver front end when the required channel-plan frequency falls within its 350 MHz to 1800 MHz center-frequency range. Its integrated integer-N synthesizer and VCO allow the receiver to derive a programmable RF output from a stable reference rather than relying on a separate frequency-generation chain. The divide-by-2 function also supports lower-frequency outputs from 175 MHz to 900 MHz. During design, select the external inductor for the intended center frequency and verify lock range, reference multiplier, divider settings, output power, and phase-noise requirements against the receiver specification.

🌐

Wireless Transmitter RF Upconversion

In transmitter designs, the ADF4360-7BCPZRL provides an integrated and programmable RF source for local-oscillator generation ahead of an upconversion stage. The 350 MHz to 1800 MHz center-frequency range covers many sub-1.8 GHz radio architectures, while the divide-by-2 output covers 175 MHz to 900 MHz for alternative mixer plans. Programmable output power permits adjustment within the device's supported operating limits. Engineers should determine the required channel frequencies, reference accuracy, lock behavior, spur performance, and conducted output limits before fixing the inductor and frequency-divider configuration.

📻

RF Downconversion

The ADF4360-7BCPZRL is suitable for driving the local-oscillator input of a downconversion mixer in instrumentation and communication equipment. Its integrated integer-N synthesizer provides programmable RF generation from a reference frequency, avoiding the need for separate divider, VCO, and synthesizer blocks in the local-oscillator path. The divide-by-2 output from 175 MHz to 900 MHz broadens the available mixer drive choices. Layout must isolate the sensitive reference and control paths from the RF output while providing a solid ground and thermal connection for the exposed pad.

📡

RF Test and Measurement

The ADF4360-7BCPZRL can serve as a programmable RF source in test equipment that requires multiple locally generated frequencies for stimulus, calibration, or measurement systems. Its 350 MHz to 1800 MHz center-frequency range, integer-N architecture, digital lock detect, and programmable output power support controlled signal generation. The divide-by-2 mode extends the usable output range down to 175 MHz. For instrument-grade performance, evaluate phase noise, reference-jitter sensitivity, spur levels, lock time, and output calibration requirements rather than relying only on the center-frequency range.

🏭

Industrial RF Control

Industrial RF systems operating below 1.8 GHz can use the ADF4360-7BCPZRL to create a stable, programmable RF signal from a system reference. The device's three-wire serial interface allows a controller to configure frequency-division, calibration, power-down, and output-power functions, while digital lock detect provides a status signal for supervisory logic. The external-inductor VCO makes the oscillator network a key part of the RF layout. Designers should place the inductor and decoupling network according to the reference circuit and confirm the operating band across temperature and supply tolerance.

🖥️

Frequency Calibration Equipment

The ADF4360-7BCPZRL can provide a programmable source for calibration systems that compare an unknown RF signal against a locally generated reference. The integer-N architecture, programmable output power, and lock indication help organize repeatable setup and fault detection, while the 350 MHz to 1800 MHz range covers many calibration points. The 175 MHz to 900 MHz divide-by-2 range provides additional low-frequency test points. Calibration accuracy remains governed by the reference source, frequency-divider settings, calibration algorithm, and system path, so those elements must be characterized separately from the synthesizer.

추천 제품 요약

ADF4360-7BCPZRL Analog Devices 사용처: Wireless Receiver Local Oscillator, Wireless Transmitter RF Upconversion, RF Downconversion, RF Test and Measurement, Industrial RF Control, Frequency Calibration Equipment ADF4360-4BCPZRL7 Related 1.75 GHz synthesizer 사용처: Wireless Receiver Local Oscillator, RF Downconversion, RF Test and Measurement, Frequency Calibration Equipment ADF4360-7BCPZRL7 Related lead-free ordering code 사용처: Wireless Transmitter RF Upconversion, Industrial RF Control
What is the ADF4360-7BCPZRL?
The ADF4360-7BCPZRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator from Analog Devices. It covers a 350 MHz to 1800 MHz center-frequency range using external inductors and is packaged in a 24-lead WFQFN with an exposed pad. According to the Analog Devices ADF4360-7 datasheet, the device also provides a divide-by-2 output covering 175 MHz to 900 MHz.
What is the operating frequency range of ADF4360-7BCPZRL?
The ADF4360-7BCPZRL supports a 350 MHz to 1800 MHz center-frequency range when configured with external inductors. Its divide-by-2 output mode covers 175 MHz to 900 MHz. These ranges come from the Analog Devices ADF4360-7 product page and manufacturer datasheet, and the external inductor choice is an essential part of achieving the intended operating frequency.
Where can I download the ADF4360-7BCPZRL datasheet PDF?
The official ADF4360-7BCPZRL datasheet is available from the Analog Devices website through the ADF4360-7 product page. The manufacturer document describes the integer-N synthesizer, external-inductor VCO, frequency ranges, serial interface, power-down functions, and application circuitry. Use the PDF from Analog Devices when establishing the authoritative pin and electrical characteristics for the design.
What is the ADF4360-7BCPZRL pinout?
The ADF4360-7BCPZRL uses a 24-lead WFQFN package with an exposed pad, and its exposed pad is connected to ground for electrical and thermal performance. Use the pin-description table and package drawing in the official Analog Devices ADF4360-7 datasheet when assigning PCB land patterns. The exposed pad and all 24 numbered terminals must be implemented according to that drawing rather than inferred from another package.
What power supply and logic levels does ADF4360-7BCPZRL use?
The ADF4360-7BCPZRL operates from a 3.6 V supply and is compatible with 1.8 V logic. According to the manufacturer datasheet, this arrangement supports low-voltage digital control while providing the supply level required by the integrated RF synthesizer and VCO. The supply rails should be decoupled close to the device, and control signals must remain within their specified voltage limits.
Where can I buy ADF4360-7BCPZRL and check its price?
Use the Request a Quote form on this XAIPART product page to request current ADF4360-7BCPZRL pricing, availability, order quantity, and lead time. Quote requests keep commercial terms aligned with the requested package and shipment quantity. Engineers can also use the official Analog Devices product page for technical documentation and the product identifier needed during purchasing.
What is the lead time for ADF4360-7BCPZRL?
The current lead time for ADF4360-7BCPZRL should be confirmed through the Request a Quote form on this page. Include the required quantity, target shipment date, and packaging preference in the request so the commercial response reflects the actual production plan. The manufacturer product page can be used in parallel for technical lifecycle and product-family information.
Is ADF4360-7BCPZRL in stock?
Current stock status for ADF4360-7BCPZRL is best confirmed through the Request a Quote form on this XAIPART page. Provide the required order quantity and whether reel or another permitted delivery format is needed. This approach avoids treating a distributor landing page as confirmation of inventory while allowing the quote team to respond with a current availability commitment.
Can ADF4360-7BCPZRL generate a divide-by-2 output?
Yes. The ADF4360-7BCPZRL includes a divide-by-2 option that produces an RF output from 175 MHz to 900 MHz. According to the Analog Devices product page and datasheet, the normal center-frequency range is 350 MHz to 1800 MHz. The divide-by-2 function can simplify the output stage when the required local-oscillator frequency is below the VCO's direct operating range.
Is ADF4360-7BCPZRL suitable for wireless receiver and transmitter designs?
The ADF4360-7BCPZRL is suitable for wireless receiver and transmitter local-oscillator generation within its 350 MHz to 1800 MHz center-frequency range. Its integrated integer-N synthesizer, programmable output power, divide-by-2 option, and digital lock detect support controllable RF signal generation. Actual suitability depends on the required frequency, reference accuracy, phase-noise performance, output power, and regulatory requirements.
What can replace ADF4360-7BCPZRL?
The closest supported pin-compatible replacement identified for the ADF4360-7BCPZRL is the ADF4360-4BCPZRL7 from Analog Devices. Both use the same 24-lead WFQFN exposed-pad family construction, while their nominal center frequencies are 1.75 GHz and 1.8 GHz, respectively. Before substitution, confirm VCO inductor values, register settings, output frequency range, and lock behavior against the manufacturer datasheets.
What is the difference between ADF4360-7BCPZRL and ADF4360-4BCPZRL7?
The principal frequency difference is nominal center frequency: 1.8 GHz for the ADF4360-7BCPZRL and 1.75 GHz for the ADF4360-4BCPZRL7. Both use the same 24-lead WFQFN exposed-pad package family, supporting board-level pin compatibility. Their VCO inductors and register configuration may still differ, so a substitution requires recalculation of the external resonator network and validation of the intended output frequencies.
When should I choose ADF4360-7BCPZRL instead of ADF4360-4BCPZRL7?
Choose the ADF4360-7BCPZRL when the design specifically targets its 1.8 GHz nominal center frequency or the 350 MHz to 1800 MHz external-inductor tuning range. Select the ADF4360-4BCPZRL7 when its 1.75 GHz nominal center frequency better matches the required oscillator plan. Although their package construction supports PCB reuse, external inductor and register differences must still be handled.
Is there a 1.8 GHz pin-compatible replacement from another manufacturer?
No cross-manufacturer drop-in replacement is established for the ADF4360-7BCPZRL. The device combines an integer-N synthesizer, an external-inductor VCO, a three-wire serial interface, and a 24-WFQFN exposed-pad footprint, making an exact substitution difficult to verify. Treat functionally similar RF synthesizers as redesign candidates rather than drop-in replacements unless their complete datasheets prove identical pinout, control, and RF behavior.
What are the key specifications of ADF4360-7BCPZRL that engineers should know?
The key specifications are a 350 MHz to 1800 MHz center-frequency range, a 175 MHz to 900 MHz divide-by-2 range, a 3.6 V supply, 1.8 V logic compatibility, a three-wire serial interface, programmable output power, digital lock detect, and a 24-lead WFQFN exposed-pad package. The Analog Devices ADF4360-7 datasheet also defines the external-inductor VCO configuration, hardware and software power-down modes, and the pin arrangement required for layout.

엔지니어링 참조 데이터: ADF4360-7BCPZRL — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ADF4360-7BCPZRL when the RF design is intended to use its 1.8 GHz nominal center frequency, 350 MHz to 1800 MHz tuning range, or 175 MHz to 900 MHz divide-by-2 output. Its integrated integer-N synthesizer and external-inductor VCO simplify RF source construction and support programmable output, lock detection, and power-down control. The ADF4360-4BCPZRL7 is the closest pin-compatible family alternative when 1.75 GHz is the more appropriate nominal frequency, but the VCO inductor and register configuration must be recalculated. Avoid assuming that package equivalence makes every ADF4360 family member a direct replacement: wider-frequency devices can be unsuitable when their operating ranges do not overlap the required output. A cross-manufacturer replacement should be considered only after complete pin, electrical, control, and RF-performance verification.

대체품과의 비교

파라미터 이 제품 ADF4360-4BCPZRL7
Brand Analog Devices Analog Devices
Package 24-lead WFQFN exposed pad 24-lead WFQFN exposed pad
Device Type Integrated integer-N synthesizer and VCO Integrated integer-N synthesizer and VCO
Nominal Center Frequency 1.8 GHz 1.75 GHz
Maximum Center Frequency 1.8 GHz 1.75 GHz

주요 차별점

  • Higher nominal center frequency within the same package family (vs ADF4360-4BCPZRL7)
  • Direct access to the upper end of the supported frequency range (vs ADF4360-4BCPZRL7)
  • Common PCB footprint for family-level reuse (vs ADF4360-4BCPZRL7)

설계 노트

Implement the VCO inductor and associated RF return path using the manufacturer reference layout. Keep the external inductor close to the intended RF network and preserve a continuous ground reference beneath the device. The 24-WFQFN exposed pad must connect to ground with short, low-impedance vias and a solderable copper area to provide both electrical return and heat dissipation.

Place the required supply and bypass capacitors directly beside their associated device pins, with the shortest possible ground return. Keep the 3.6 V supply routing compact and decouple sensitive reference and control nodes near the IC. Verify startup and power-down sequencing in the final system so the synthesizer does not receive an uncontrolled reference or serial command during rail transitions.

Do not substitute the external inductor or reuse the ADF4360-4 register settings without recalculation. The ADF4360-7BCPZRL and ADF4360-4BCPZRL7 share the 24-lead WFQFN family construction, but their nominal center frequencies are 1.8 GHz and 1.75 GHz. Validate the VCO network, divider values, lock range, output frequency, and register map on the intended board before treating either part as a substitution.

Route the RF output as a controlled transmission line when the board geometry or operating frequency requires it, and terminate unused outputs according to the reference design. Keep the serial interface, reference input, and power connections away from the RF output path to reduce crosstalk and phase-noise coupling. Use a continuous ground plane to minimize impedance discontinuities near the exposed pad.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product is an RF clock-and-timing IC rather than an automotive-qualified device. Compliance attributes require confirmation from the current manufacturer documentation or the customer-specific material declaration.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

adf4360 7bcpzrl adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-7BCPZRL datasheet ADF4360-7BCPZRL pinout ADF4360-7BCPZRL datasheet pdf ADF4360-7BCPZRL equivalent ADF4360-7BCPZRL replacement ADF4360-7BCPZRL vs ADF4360-4BCPZRL7 ADF4360-7BCPZRL footprint ADF4360-7BCPZRL application circuit ADF4360-7BCPZRL price ADF4360-7BCPZRL stock Analog Devices ADF4360-7BCPZRL

관련 부품 & 용어

Analog Devices ADF4360-7BCPZRL ADF4360-4BCPZRL7 ADF4360-7BCPZRL7 integer-N frequency synthesizer voltage-controlled oscillator VCO phase-locked loop PLL clock and timing IC RF signal generator external inductor divide-by-2 output three-wire serial interface digital lock detect programmable output power power-down mode 24-lead WFQFN exposed pad surface-mount package wireless receiver wireless transmitter RF downconversion test and measurement reference frequency
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기