ADF4360-7BCPZRL - 1.8 GHz Integer-N VCO | Analog Devices
料号: ADF4360-7BCPZRL ✓ 量产中ADF4360-7BCPZRL 概述
An integer-N synthesizer is a phase-locked-loop device that combines a frequency divider, phase detector, charge pump, loop filter, and voltage-controlled oscillator to produce an output frequency locked to a reference source. The ADF4360-7 belongs to the broader hierarchy of frequency synthesizer, clock and timing IC, phase-locked loop, and RF signal-generation semiconductor. Integrating the synthesizer and VCO reduces the number of high-frequency discrete components required in the RF signal chain.
The ADF4360-7 covers a 350 MHz to 1800 MHz center-frequency range when configured with external inductors. Its divide-by-2 output option provides frequencies from 175 MHz to 900 MHz. Additional documented functions include a three-wire serial interface, programmable output power, digital lock detect, and hardware or software power-down control, making the device suitable for systems that need controllable RF output and efficient power management.
The RF architecture operates from a 3.6 V supply and supports 1.8 V logic compatibility. These characteristics suit equipment using modern low-voltage control systems while retaining the voltage headroom required by the integrated VCO and synthesizer. External inductors determine the center frequency and are therefore a central part of frequency planning rather than optional power inductors.
Typical uses include local oscillator generation for wireless receivers and transmitters, RF down-conversion, test and measurement instrumentation, industrial RF control, and communications equipment operating below 1.8 GHz. The divide-by-2 function is particularly useful when a lower output is required without implementing a separate output divider stage.
PCB design requires careful treatment of the 24-WFQFN exposed pad, supply decoupling, grounding, and the external VCO inductors. The exposed pad must be connected to the ground plane with a low-impedance thermal and electrical path. The reference, serial interface, and RF output routing should also follow the layout guidance in the manufacturer datasheet.
This product data combines the ADF4360-7 operating ranges, package information, pin-compatible family references, and practical implementation guidance to support RF architecture selection, PCB planning, and replacement decisions.
直接替换替代料: ADF4360-7BCPZRL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADF4360-7BCPZRL (相同外形与封装尺寸) ——差异在于 Package, Synthesizer Architecture, Power-Down Modes, Product Type, Device Type.
ADF4360-4BCPZRL7
✅ 直接替换📋 参考替代料(不在目录中)
ADF4360-7BCPZRL 规格参数
| Device Type | Integrated integer-N synthesizer and voltage-controlled oscillator |
| Center Frequency Range | 350 MHz to 1800 MHz |
| Maximum Center Frequency | 1800 MHz |
| Divide-by-2 Output Range | 175 MHz to 900 MHz |
| Nominal Center Frequency | 1800 MHz |
| Synthesizer Architecture | Integer-N |
| VCO Inductor Selection | External |
| 电源电压 | 3.6 V |
| Logic Compatibility | 1.8 V |
| Serial Interface | 3-wire |
| Output Power | Programmable |
| Lock Detect | Digital |
| Power-Down Modes | Hardware and software |
| 封装 | 24-lead WFQFN with exposed pad |
| 引脚数量 | 24 pins |
| 安装类型 | Surface mount |
| 工作温度范围 | -40 °C to +85 °C |
ADF4360-7BCPZRL 24-lead wfqfn with exposed pad 引脚配置指南
ADF4360-7BCPZRL(24-lead wfqfn with exposed pad 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADF4360-7BCPZRL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADF4360-7BCPZRL 适用于 6 应用s: Wireless Receiver Local Oscillator, Wireless Transmitter RF Upconversion, RF Downconversion, RF Test and Measurement, Industrial RF Control, Frequency Calibration Equipment.
Wireless Receiver Local Oscillator
The ADF4360-7BCPZRL can generate the local-oscillator signal used by a wireless receiver front end when the required channel-plan frequency falls within its 350 MHz to 1800 MHz center-frequency range. Its integrated integer-N synthesizer and VCO allow the receiver to derive a programmable RF output from a stable reference rather than relying on a separate frequency-generation chain. The divide-by-2 function also supports lower-frequency outputs from 175 MHz to 900 MHz. During design, select the external inductor for the intended center frequency and verify lock range, reference multiplier, divider settings, output power, and phase-noise requirements against the receiver specification.
推荐
Wireless Transmitter RF Upconversion
In transmitter designs, the ADF4360-7BCPZRL provides an integrated and programmable RF source for local-oscillator generation ahead of an upconversion stage. The 350 MHz to 1800 MHz center-frequency range covers many sub-1.8 GHz radio architectures, while the divide-by-2 output covers 175 MHz to 900 MHz for alternative mixer plans. Programmable output power permits adjustment within the device's supported operating limits. Engineers should determine the required channel frequencies, reference accuracy, lock behavior, spur performance, and conducted output limits before fixing the inductor and frequency-divider configuration.
推荐
RF Downconversion
The ADF4360-7BCPZRL is suitable for driving the local-oscillator input of a downconversion mixer in instrumentation and communication equipment. Its integrated integer-N synthesizer provides programmable RF generation from a reference frequency, avoiding the need for separate divider, VCO, and synthesizer blocks in the local-oscillator path. The divide-by-2 output from 175 MHz to 900 MHz broadens the available mixer drive choices. Layout must isolate the sensitive reference and control paths from the RF output while providing a solid ground and thermal connection for the exposed pad.
推荐
RF Test and Measurement
The ADF4360-7BCPZRL can serve as a programmable RF source in test equipment that requires multiple locally generated frequencies for stimulus, calibration, or measurement systems. Its 350 MHz to 1800 MHz center-frequency range, integer-N architecture, digital lock detect, and programmable output power support controlled signal generation. The divide-by-2 mode extends the usable output range down to 175 MHz. For instrument-grade performance, evaluate phase noise, reference-jitter sensitivity, spur levels, lock time, and output calibration requirements rather than relying only on the center-frequency range.
推荐
Industrial RF Control
Industrial RF systems operating below 1.8 GHz can use the ADF4360-7BCPZRL to create a stable, programmable RF signal from a system reference. The device's three-wire serial interface allows a controller to configure frequency-division, calibration, power-down, and output-power functions, while digital lock detect provides a status signal for supervisory logic. The external-inductor VCO makes the oscillator network a key part of the RF layout. Designers should place the inductor and decoupling network according to the reference circuit and confirm the operating band across temperature and supply tolerance.
推荐
Frequency Calibration Equipment
The ADF4360-7BCPZRL can provide a programmable source for calibration systems that compare an unknown RF signal against a locally generated reference. The integer-N architecture, programmable output power, and lock indication help organize repeatable setup and fault detection, while the 350 MHz to 1800 MHz range covers many calibration points. The 175 MHz to 900 MHz divide-by-2 range provides additional low-frequency test points. Calibration accuracy remains governed by the reference source, frequency-divider settings, calibration algorithm, and system path, so those elements must be characterized separately from the synthesizer.
推荐
推荐产品汇总
工程参考数据: ADF4360-7BCPZRL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADF4360-4BCPZRL7 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-lead WFQFN exposed pad | 24-lead WFQFN exposed pad |
| Device Type | Integrated integer-N synthesizer and VCO | Integrated integer-N synthesizer and VCO |
| Nominal Center Frequency | 1.8 GHz | 1.75 GHz |
| Maximum Center Frequency | 1.8 GHz | 1.75 GHz |
关键差异点
- Higher nominal center frequency within the same package family (对比 ADF4360-4BCPZRL7)
- Direct access to the upper end of the supported frequency range (对比 ADF4360-4BCPZRL7)
- Common PCB footprint for family-level reuse (对比 ADF4360-4BCPZRL7)
设计说明
Implement the VCO inductor and associated RF return path using the manufacturer reference layout. Keep the external inductor close to the intended RF network and preserve a continuous ground reference beneath the device. The 24-WFQFN exposed pad must connect to ground with short, low-impedance vias and a solderable copper area to provide both electrical return and heat dissipation.
Place the required supply and bypass capacitors directly beside their associated device pins, with the shortest possible ground return. Keep the 3.6 V supply routing compact and decouple sensitive reference and control nodes near the IC. Verify startup and power-down sequencing in the final system so the synthesizer does not receive an uncontrolled reference or serial command during rail transitions.
Do not substitute the external inductor or reuse the ADF4360-4 register settings without recalculation. The ADF4360-7BCPZRL and ADF4360-4BCPZRL7 share the 24-lead WFQFN family construction, but their nominal center frequencies are 1.8 GHz and 1.75 GHz. Validate the VCO network, divider values, lock range, output frequency, and register map on the intended board before treating either part as a substitution.
Route the RF output as a controlled transmission line when the board geometry or operating frequency requires it, and terminate unused outputs according to the reference design. Keep the serial interface, reference input, and power connections away from the RF output path to reduce crosstalk and phase-noise coupling. Use a continuous ground plane to minimize impedance discontinuities near the exposed pad.
合规信息
The product is an RF clock-and-timing IC rather than an automotive-qualified device. Compliance attributes require confirmation from the current manufacturer documentation or the customer-specific material declaration.