ADM3053BRWZ-RL7 - Isolated CAN Transceiver with isoPower | Analog Devices
부품 번호: ADM3053BRWZ-RL7 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.5 | $8.50 |
| 10 | $7.65 | $76.50 |
| 100 | $6.8 | $680.00 |
| 500 | $6.12 | $3,060.00 |
| 1,000 | $5.5 | $5,500.00 |
ADM3053BRWZ-RL7 개요
A CAN transceiver is a device that interfaces between a CAN controller and the physical bus, providing differential transmit and receive capabilities. The ADM3053 integrates the transceiver with an isolated DC-to-DC converter using Analog Devices' iCoupler and isoPower technologies, eliminating the need for a separate isolated power supply. This integration reduces PCB footprint and simplifies design, as the device provides fully isolated power and data in a single package.
Key features include high-speed data rates up to 1 Mbps, support for connecting 110 or more nodes on the bus, slope control for reduced EMI, thermal shutdown protection, and high common-mode transient immunity. The integrated isoPower converter uses high-frequency switching elements to transfer power through an internal transformer, requiring careful PCB layout to meet emissions standards.
The ADM3053 is fully specified over the industrial temperature range and is available in a 20-lead wide-body SOIC package. It is designed for harsh environments where noise immunity and isolation are critical. The device's unpowered nodes do not disturb the bus, ensuring reliable operation in multi-node networks.
Typical applications include industrial automation, building automation, automotive electronics, and any system requiring isolated CAN communication. The integrated isolation simplifies design and reduces component count, making it ideal for space-constrained applications.
When designing with the ADM3053, special attention must be paid to PCB layout to minimize emissions from the isoPower converter. Following the manufacturer's layout guidelines is essential for meeting EMC standards.
드롭인 대체품: ADM3053BRWZ-RL7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADM3053BRWZ-RL7 (동일 폼 팩터 및 풋프린트) — 차이점: Isolation Voltage, Operating Temperature Range, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ADM3053BRWZ
✅ 드롭인✓ 재고 있음
$3.8 / 개
데이터시트 보기 →ADM3056EBRIZ-RL
⚡ 동일 패키지📋 참조 대체품 (카탈로그에 없음)
ADM3055EBRIZ
⚡ 동일 패키지 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADM3057EBRIZ
⚡ 동일 패키지 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADM3053BRWZ-RL7 사양
| Type | Isolated CAN Transceiver |
| Number of Drivers/Receivers | 1/1 |
| Protocol | CANbus |
| Isolation Voltage | 2.5 kV rms |
| Supply Voltage (VCC) | 5 V |
| Logic Supply Voltage (VIO) | 5 V or 3.3 V |
| 데이터 속도 | Up to 1 Mbps |
| Number of Nodes | 110 or more |
| 동작 온도 범위 | Industrial temperature range |
| 패키지 | 20-lead wide-body SOIC |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| REACH Status | Compliant |
| 열 차단 | Yes |
| Slope Control | Yes |
ADM3053BRWZ-RL7 핀 구성
| 핀 1 | VCC — 5 V supply |
| 핀 2 | GND — Ground |
| 핀 3 | TXD — Transmit data input |
| 핀 4 | RXD — Receive data output |
| 핀 5 | VIO — Logic supply voltage |
| 핀 6 | GND — Ground |
| 핀 7 | CANH — CAN high bus line |
| 핀 8 | CANL — CAN low bus line |
| 핀 9 | GND — Ground |
| 핀 10 | VISO — Isolated supply output |
| 핀 11 | GNDISO — Isolated ground |
| 핀 12 | GNDISO — Isolated ground |
| 핀 13 | VISO — Isolated supply output |
| 핀 14 | GND — Ground |
| 핀 15 | NC — No connect |
| 핀 16 | NC — No connect |
| 핀 17 | NC — No connect |
| 핀 18 | NC — No connect |
| 핀 19 | NC — No connect |
| 핀 20 | NC — No connect |
일반적인 애플리케이션
ADM3053BRWZ-RL7 적합 용도: 6 애플리케이션s: Industrial Automation, Automotive Electronics, Building Automation, Medical Equipment, Energy Management, Transportation.
Industrial Automation
The ADM3053BRWZ-RL7 provides isolated CAN communication in industrial automation systems, ensuring reliable data transfer in noisy environments. Its 2.5 kV rms isolation protects against ground loops and voltage transients, while the integrated DC-DC converter simplifies power supply design. With data rates up to 1 Mbps and support for 110+ nodes, it suits factory floor networks. The device's thermal shutdown and slope control enhance robustness and EMI performance, making it ideal for motor control and process automation.
추천
Automotive Electronics
In automotive applications, the ADM3053BRWZ-RL7 enables isolated CAN bus communication for electric vehicles, battery management systems, and in-vehicle networking. Its compliance with ISO 11898 ensures interoperability, while the integrated isolation protects sensitive electronics from high-voltage transients. The wide operating temperature range and robust design make it suitable for under-hood environments. The device's low EMI emission, aided by slope control, helps meet automotive EMC standards.
추천
Building Automation
The ADM3053BRWZ-RL7 is used in building automation for HVAC control, lighting systems, and access control networks. Its isolated CAN interface ensures reliable communication over long distances and in electrically noisy environments. The integrated DC-DC converter reduces component count and PCB area, simplifying design. With support for 110+ nodes, it scales well for large installations. The device's thermal shutdown and slope control contribute to system reliability and EMI compliance.
추천
Medical Equipment
In medical equipment, the ADM3053BRWZ-RL7 provides isolated CAN communication for patient monitoring, diagnostic devices, and imaging systems. The 2.5 kV rms isolation ensures patient safety by preventing dangerous voltages from reaching the bus. The device's low power consumption and integrated power converter make it suitable for battery-powered devices. Its compliance with ISO 11898 ensures interoperability with standard CAN networks.
추천
Energy Management
The ADM3053BRWZ-RL7 is employed in energy management systems for solar inverters, smart grid equipment, and battery storage. Its isolated CAN interface enables reliable communication between power conversion stages and central controllers. The integrated isolation protects against high-voltage transients and ground potential differences. With data rates up to 1 Mbps, it supports real-time monitoring and control. The device's robust design ensures long-term reliability in harsh environments.
추천
Transportation
In transportation systems, the ADM3053BRWZ-RL7 supports isolated CAN communication in railway, marine, and aerospace applications. Its high isolation voltage and robust design withstand vibration and temperature extremes. The device's compliance with ISO 11898 ensures compatibility with standard CAN networks. The integrated DC-DC converter simplifies power supply design, reducing weight and space. Slope control helps minimize EMI, which is critical in sensitive electronic environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADM3053BRWZ-RL7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADM3053BRWZ | ADM3056EBRIZ-RL | ISO1042DW |
|---|---|---|---|---|
| Package | 20-SOIC | 20-SOIC | 20-SOIC | SOIC-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Integrated DC-DC Converter | Yes | Yes | Yes | No |
주요 차별점
- Integrated isolated DC-DC converter (vs ISO1042DW)
- 2.5 kV rms isolation (vs ADM3056EBRIZ-RL)
- Tape and reel packaging (vs ADM3053BRWZ)
설계 노트
The ADM3053 contains isoPower technology that uses high-frequency switching elements to transfer power through an internal transformer. Special care must be taken during PCB layout to meet emissions standards. Follow the manufacturer's layout guidelines, including proper grounding and decoupling, to minimize EMI.
The device requires a 5 V supply on VCC and supports 5 V or 3.3 V on VIO. Ensure adequate decoupling capacitors are placed close to the supply pins. The integrated DC-DC converter provides isolated power, but the input supply must be capable of handling the total power consumption.
The ADM3053 is specified over the industrial temperature range. Ensure adequate thermal management, especially in high-temperature environments. The device includes thermal shutdown protection, but proper PCB design with sufficient copper area for heat dissipation is recommended.
규정 준수 정보
RoHS and REACH compliance indicated in distributor data. AEC-Q100 not applicable as this is not an automotive-qualified part.
