Texas Instruments

ADS7800JU - 12-Bit 3us SAR ADC | Texas Instruments | Precision

부품 번호: ADS7800JU ✓ 활성
+5 V Vdss 24-pin SOIC (DW) Package
MOQ: 1 |

ADS7800JU 개요

Texas Instruments ADS7800JU is a 12-bit, single-input, successive-approximation analog-to-digital converter in a 24-pin SOIC package. It requires 3 us conversion time, operates at up to 333 kSPS, and accepts analog input signals referenced to a +5 V supply with a -12 V or -15 V negative supply. The device is intended for precision signal acquisition where a compact, complete ADC and parallel output interface are useful.

An ADC is an integrated circuit that converts a continuous analog voltage into a numeric code. The ADS7800 belongs to the sampling ADC and successive-approximation hierarchy, commonly abbreviated SAR ADC. A SAR ADC compares the sampled input with an internally generated reference through a successive conversion process, producing a 12-bit result after approximately 3 us. This architecture combines relatively high conversion speed with useful resolution for industrial measurement, instrumentation, and control systems.

Key features include one analog input, 12-bit resolution, a 3 us conversion time, and a maximum sampling rate of 333 kSPS. The ADS7800JU is offered in the 24-pin SOIC (DW) package and is specified over -40 C to +85 C. Two device grades are described by Texas Instruments as offering different linearity and dynamic performance, allowing the application requirements to determine the appropriate grade. A parallel interface provides direct access to the converted digital value.

The ADC operates from a +5 V supply and either a -12 V or -15 V supply. These rails provide suitable operating conditions for bipolar analog input stages while the internal conversion process generates the digital result. Because the converter includes a complete sampling architecture, it reduces the need for separate sampling-hold circuitry while still requiring careful attention to input drive, reference stability, grounding, and digital-bus timing.

Typical applications include industrial process monitoring, laboratory instrumentation, sensor-interface circuits, closed-loop control, data acquisition, and embedded measurement systems. A system designer should select an input-conditioning network that keeps the analog signal within the converter's input range and provide a low-noise reference if measurement accuracy is important. The parallel output bus should be connected only to compatible logic, with suitable bus timing and unused inputs handled according to the manufacturer data sheet.

A key design consideration is the relationship between input bandwidth, acquisition time, and conversion rate. The 333 kSPS maximum rate is useful for continuous monitoring, but high-rate operation requires a low-impedance source and correct settling of the sampling network. The negative supply must be generated cleanly when the selected analog input range requires bipolar operation, and the +5 V rail should be decoupled close to the device.

This product page combines the manufacturer's core electrical, package, application, and lifecycle information with structured alternatives, application guidance, comparison data, and practical PCB-design notes. These resources help engineers identify whether the ADS7800JU fits a new design or whether a closely related ADC should be evaluated before layout begins.

드롭인 대체품: ADS7800JU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADS7800JU (동일 폼 팩터 및 풋프린트) — 차이점: Conversion Time, Package, Mounting Type, Resolution, Sampling Rate.

Texas Instruments
Conversion Time: 10 µs
Package: 20-pin SOIC (DW)
Resolution: 16 bit
비교 대상: ADS7800JU →
Analog Devices
Conversion Time: 7.5 us
Sampling Rate: 73 ksps
비교 대상: ADS7800JU →
Microchip Technology
Package: 14-pin PDIP
Mounting Type: Through-hole
Sampling Rate: 100 kSPS

ADS7809UB

✅ 드롭인
Texas Instruments
📦 SOIC-24 (DW)
Successive Approximation Register (SAR) · 16 bit · 10 µs · 1 channel · Single-ended analog input · CMOS · Serial CMOS interface · Internal or external clock

가격 문의

데이터시트 보기 →

AD7864

✅ 드롭인
📦 SOIC-24
Equivalent 12-bit ADC candidate in a 24-pin package; channel count, pin assignment, and timing must be verified

📋 참조 대체품 (카탈로그에 없음)

MCP3204-CI/P

✅ 드롭인
Microchip Technology
📦 SOIC-24
12 bit · 4 single-ended inputs or 2 pseudo-differential pairs · 100 kSPS · Successive approximation register (SAR) · 2.7 V to 5.5 V · 500 nA · 320 µA · SPI serial interface

가격 문의

데이터시트 보기 →

MAX1241BCSA+T

✅ 드롭인
Analog Devices
📦 SOIC-24
Analog Devices Inc./Maxim Integrated · MAX1241BCSA+T · 12-bit, low-power, serial SAR ADC · 12 bit · 1 · SAR (Successive Approximation Register) · 73 ksps · 7.5 us

가격 문의

데이터시트 보기 →

ADS7800JU 최대 정격 & 전기적 특성

ADC Type Successive-approximation sampling ADC
분해능 12 bit
Number of Inputs 1 input
Conversion Time 3 us
Maximum Sampling Rate 333 kSPS
Output Interface Parallel
Positive Supply Voltage +5 V
Negative Supply Voltage -12 V or -15 V
패키지 24-pin SOIC (DW)
동작 온도 범위 -40 C to +85 C
Available Commercial Temperature Range 0 C to +70 C
Linearity and Dynamic Performance Grades 2 grades
실장 유형 Surface mount

ADS7800JU 24-pin soic (dw) 핀 구성 가이드

ADS7800JU(24-pin soic (dw) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

ADS7800JU의 24-pin soic (dw) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADS7800JU.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADS7800JU 적합 용도: 6 애플리케이션s: Industrial Process Monitoring, Precision Data Acquisition, Laboratory Instrumentation, Closed-Loop Control, Sensor Interface Circuits, Embedded Measurement Systems.

🏭

Industrial Process Monitoring

The Texas Instruments ADS7800JU fits process-monitoring designs that require a 12-bit measurement updated at up to 333 kSPS. Its single input and 3 us conversion time support fast sensing of pressure, position, level, or temperature signals after suitable conditioning. The 24-pin SOIC package permits a conventional surface-mount layout, while the parallel output can connect to a processor or programmable logic. Engineers should scale the sensor output into the converter input range, provide a stable reference and clean supply rails, and verify acquisition timing against the source impedance.

📈

Precision Data Acquisition

The ADS7800JU is appropriate for compact 12-bit acquisition systems that need deterministic conversion timing without a multiplexing stage. A conversion time of 3 us and a maximum sampling rate of 333 kSPS allow rapid capture of a conditioned analog waveform. Its 24-pin parallel interface exposes the result directly to digital logic, reducing conversion-interface complexity. For best performance, use a low-impedance drive network, separate analog and digital return paths, and validate the input's settling behavior at the highest operating sample rate.

🔬

Laboratory Instrumentation

In laboratory instruments, the ADS7800JU can digitize a conditioned measurement channel while providing 12-bit resolution and a 3 us conversion time. This combination is useful for front ends that sample slowly varying sensor signals or repetitive waveform segments. The parallel interface can feed a control FPGA or microcontroller without requiring a serial ADC. Calibration performance will depend on the reference network, analog front-end linearity, noise, grounding, and the specified input range, so those details should be established from the manufacturer data sheet during design.

🎛️

Closed-Loop Control

The ADS7800JU can serve as the measurement element in a closed-loop motion or equipment-control system. A 3 us conversion time allows the controller to receive a new 12-bit measurement rapidly, while the one-input architecture keeps the design focused on a primary feedback channel. The converter requires +5 V and either -12 V or -15 V supplies, which makes rail planning important in compact embedded systems. Validate control-loop latency, output update behavior, analog noise, and fault-state handling before using the ADC in a safety-critical path.

🧩

Sensor Interface Circuits

The ADS7800JU is suitable for digitizing outputs from bridge, resistive, and active sensor front ends when the conditioned signal can be handled by a 12-bit, single-input SAR converter. Its 333 kSPS maximum rate is more than adequate for many temperature, pressure, and position sensors, while the 3 us conversion time supports higher-rate feedback. The analog conditioning network should include gain, filtering, and any required level shifting. Check input settling, reference accuracy, and supply requirements in the data sheet to ensure the complete signal chain does not exceed the converter's accuracy target.

🖥️

Embedded Measurement Systems

The 24-pin SOIC ADS7800JU works well in embedded measurement equipment where a parallel ADC simplifies connection between analog conditioning and digital control logic. Texas Instruments specifies the JU grade over -40 C to +85 C, supporting industrial-temperature designs when the complete system also meets its environmental requirements. The +5 V, -12 V, and -15 V operating options provide flexibility in dual-supply analog architectures. Designers should reserve routing space for the parallel bus, keep converter traces away from sensitive analog inputs, and use local bypass capacitors according to the recommended application circuit.

What is the ADS7800JU?
The ADS7800JU is a 12-bit, single-input, successive-approximation sampling analog-to-digital converter from Texas Instruments. According to the manufacturer product page, it provides a 3 us conversion time, supports up to 333 kSPS, and uses a 24-pin SOIC package. The JU ordering option is specified for operation from -40 C to +85 C.
What are the key specifications of ADS7800JU that engineers should know?
The ADS7800JU combines 12-bit resolution, one analog input, a 3 us conversion time, a 333 kSPS maximum sampling rate, and a 24-pin SOIC package. Texas Instruments specifies operation from a +5 V supply and either a -12 V or -15 V supply. Its parallel output interface provides a direct numeric result for acquisition and control circuits.
What is the operating voltage range of ADS7800JU?
The ADS7800JU operates from a +5 V positive supply together with either a -12 V or -15 V negative supply. According to the Texas Instruments product page, these are the specified operating supplies for the ADS7800 family. The exact absolute-maximum ratings and permissible supply tolerances should be confirmed in the manufacturer data sheet before circuit design.
How fast does the ADS7800JU perform analog-to-digital conversion?
The ADS7800JU performs a conversion in 3 us and supports a maximum sampling rate of 333 kSPS. Texas Instruments describes the device as a 12-bit sampling analog-to-digital converter, and the product listing identifies the conversion time and sampling performance as key product attributes. Continuous-rate operation also depends on acquisition, signal-source impedance, and system timing.
Where can I download the ADS7800JU datasheet PDF?
The official ADS7800 datasheet and supporting documentation are available from the Texas Instruments product page at https://www.ti.com/product/ADS7800. For the exact JU ordering option, use the manufacturer part-details page at https://www.ti.com/product/ADS7800/part-details/ADS7800JU. Use the pin-description and electrical-characteristics tables in the manufacturer data sheet for final design and layout decisions.
Where can I find the ADS7800JU pinout?
The ADS7800JU pinout is published in the manufacturer data sheet associated with the Texas Instruments ADS7800 product page. The JU package contains 24 pins in an SOIC (DW) configuration. Assign PCB connections from the numbered pin-description table in the manufacturer data sheet rather than relying on a generic SOIC drawing.
Is ADS7800JU suitable for industrial measurement and control systems?
The ADS7800JU is suitable for many industrial measurement and control systems because it provides 12-bit resolution, a 3 us conversion time, and a -40 C to +85 C temperature range. The SOIC package and parallel interface simplify connection to suitable digital logic. Analog input range, accuracy, noise, and reference details must be checked against the application requirements.
What can replace the ADS7800JU on the same PCB?
The closest published functional candidates for the ADS7800JU are the ADS7809UB from Texas Instruments and the AD7864, MCP3204, and MAX1241 from other manufacturers. A valid drop-in replacement still requires identical pin assignment, supply requirements, input range, interface timing, and converter performance. Review the manufacturer pin and electrical tables before approving any replacement.
Is ADS7800JU the same as AD7864, MCP3204, or MAX1241?
The ADS7800JU is functionally similar to the AD7864, MCP3204, and MAX1241 because they are listed as equivalent products, but they are not automatically interchangeable. The ADS7800JU has a 12-bit resolution, a 3 us conversion time, one input, and a 24-pin SOIC package. Verify pinout, supply rails, analog range, output coding, and acquisition timing for each candidate.
ADS7800JU vs AD7864: which is better for a precision acquisition system?
The ADS7800JU is preferable when its specified 12-bit resolution, 3 us conversion time, one-input architecture, and 24-pin SOIC package meet the design, while the AD7864 should be selected when its channel count, accuracy, interface, or operating characteristics provide a better fit. The published equivalent-part information does not establish identical pin behavior, so compare the two data sheets before replacement.
ADS7800JU vs MCP3204: which is better for a 12-bit design?
The ADS7800JU is the closer architectural match for a design requiring one analog input, 12-bit resolution, a 3 us conversion time, and a parallel interface. The MCP3204 is a relevant 12-bit candidate for a four-channel design, but channel count alone makes it unsuitable as a direct substitute unless the additional channels are used. Confirm pin-level compatibility and interface timing in the manufacturer data sheets.
When should I choose ADS7800JU over ADS7809UB?
Choose the ADS7800JU when its 12-bit, 3 us, single-input SAR conversion characteristics match the acquisition system. Consider the ADS7809UB when its separately published resolution, accuracy, input, timing, and supply characteristics provide a better match. Because the devices are related alternatives but are not necessarily identical, compare their manufacturer data sheets and verify every board connection.
Is ADS7800JU in stock and what is its lead time?
Current ADS7800JU stock, production lead time, and minimum order quantity should be requested through the Request a Quote form on this page. Texas Instruments lists the JU option in the 24-pin SOIC package for -40 C to +85 C operation. Commercial scheduling requires a quantity-specific quote and the latest manufacturer supply status.
Where can I buy ADS7800JU online?
Use the Request a Quote form on this page to request ADS7800JU availability, lead time, and order quantities from XAIPART. The manufacturer part-details page identifies ADS7800JU as a 24-pin SOIC ordering option with a -40 C to +85 C temperature range. Submit the required quantity and target date so the order can be scheduled accordingly.
What is the price of ADS7800JU?
Use the Request a Quote form on this page for the current ADS7800JU price and quantity schedule. The structured pricing for this exact 24-pin SOIC ordering option can change with quantity, market conditions, and requested delivery terms. Providing the required order quantity enables a current quotation without relying on an outdated price table.

엔지니어링 참조 데이터: ADS7800JU — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ADS7800JU when the design requires a single analog input, 12-bit resolution, a 3 us conversion time, and a 24-pin SOIC footprint. It is particularly suitable for compact industrial measurement and embedded acquisition systems that use a +5 V rail and a -12 V or -15 V negative rail. Consider the ADS7809UB when a related Texas Instruments family member offers a better match for accuracy, input, or timing requirements. Evaluate the AD7864 when its ADC implementation and interface provide a better fit for a multi-channel or different sampling architecture. MCP3204 is advantageous when four analog inputs are useful, but it is not a direct functional match for a one-channel design. MAX1241 should be selected only after its pinout, supply requirements, input range, and output timing are confirmed against the existing design.

대체품과의 비교

파라미터 이 제품 ADS7809UB AD7864 MCP3204 MAX1241
Package 24-pin SOIC (DW) 24-pin SOIC (DW) 24-pin SOIC 24-pin SOIC 24-pin SOIC
Brand Texas Instruments Texas Instruments Analog Devices Microchip Technology Maxim Integrated

주요 차별점

  • Single-input converter with a defined 3 us conversion time (vs MCP3204)
  • Family choice of linearity and dynamic-performance grades (vs AD7864)
  • Single-supplier continuity with a related Texas Instruments ADC (vs MAX1241)

설계 노트

Place the input-conditioning components, local supply bypass capacitors, and converter as close together as practical. Keep sensitive analog traces short and route the 12-bit parallel output away from the analog input and reference network. Use a single ground strategy that keeps analog return currents from crossing the digital output current path; the manufacturer application circuit should guide the final reference layout.

Validate the source impedance and acquisition network against the 3 us conversion specification. A high-impedance sensor or slow-settling filter can cause conversion error even when the digital timing is correct. Measure the input at the ADC pin with appropriate test equipment, and adjust the source drive or acquisition time before increasing the sample rate beyond 333 kSPS.

Design the supply network for +5 V together with either -12 V or -15 V. Decouple each supply close to the device and use stable, low-noise sources for the analog rails and reference circuitry. Because the available data does not state the exact input range, reference voltage, or power dissipation, use the manufacturer data sheet to confirm that the selected bipolar rails and signal amplitudes remain within the operating limits.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page identifies the ADS7800JU temperature range, supply requirements, and package, but the retrieved information does not state specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals results. AEC-Q100 status is marked not applicable because the device is not identified as an automotive-qualified product.

관련 검색

ADS7800JU datasheet ADS7800JU pinout ADS7800JU datasheet pdf ADS7800JU specifications ADS7800JU application circuit ADS7800JU replacement ADS7800JU equivalent ADS7800JU vs AD7864 ADS7800JU vs MCP3204 ADS7800JU SOIC-24 pinout Texas Instruments ADS7800JU ADS7800JU price ADS7800JU stock 12-bit 333 kSPS ADC What is the ADS7800JU conversion time?

관련 부품 & 용어

Texas Instruments ADS7800JU ADS7809UB AD7864 MCP3204 MAX1241 analog-to-digital converter ADC sampling ADC successive-approximation ADC SAR ADC 12-bit resolution 3 us conversion time 333 kSPS parallel output interface 24-pin SOIC SOIC-24 DW package surface-mount package semiconductor analog signal acquisition industrial process monitoring embedded measurement precision instrumentation
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기