Texas Instruments

ADS7841EB - 12-Bit 4-Channel 200ksps ADC | Texas Instruments

부품 번호: ADS7841EB ✓ 활성
0 V to VREF Vdss 16-pin SSOP Package
MOQ: 1 |

ADS7841EB 개요

The Texas Instruments ADS7841EB is a 12-bit, 4-channel, successive-approximation analog-to-digital converter with a synchronous serial interface and a 200 ksample/s conversion rate. It is offered in a 16-pin SSOP package and accepts four single-ended inputs or two differential inputs. Its resolution can be programmed for either 8-bit or 12-bit operation, while the reference input can range from 100 mV to VCC, establishing a corresponding 0 V to VREF input range.

An ADC converts continuous analog voltages into digital values for measurement, control, and data-acquisition systems. The ADS7841 belongs to the sampling ADC hierarchy, combining an internal sample-and-hold stage with a successive-approximation converter and a synchronous serial interface. This positioning makes it suitable for compact embedded systems that require multiple analog inputs without the complexity of a high-speed parallel ADC.

The principal features include 12-bit nominal resolution, four selectable analog channels, and a maximum throughput of 200 ksample/s. The converter provides ±1 LSB maximum integral and differential nonlinearity, no missing codes, and 72 dB SINAD according to the manufacturer datasheet. It also supports single-supply operation and programmable 8-bit or 12-bit conversion resolution, allowing a faster communication mode when full-resolution output is not required.

The ADS7841 uses a synchronous serial interface, identified in product listings as SPI-compatible, for receiving conversion commands and transferring converted data. This interface reduces the number of signal paths required between the ADC and a microcontroller. Although the sampling architecture provides useful conversion throughput, output-word latency and the selected serial clock must be considered when establishing the overall sampling rate in a complete acquisition system.

Typical uses include resistive touch-screen sensing, industrial control panels, potentiometer and sensor measurement, battery monitoring, and compact data-acquisition modules. The four single-ended inputs are useful when several analog quantities must be scanned sequentially, while differential-input operation helps reject common-mode noise in suitable sensor interfaces. The low 2 mW typical power dissipation at a 200 kHz throughput rate and 5 V supply supports space-constrained and portable equipment.

Design attention should focus on reference stability, input-source settling, serial timing, and PCB grounding. Place input and reference capacitors close to their associated pins, maintain a quiet return path, and allow sufficient acquisition time for the source and sample-and-hold network to settle. The manufacturer pin-description table should be used directly when assigning PCB tracks and checking the exposed package constraints.

This product page combines the manufacturer electrical characteristics, package details, commercial guidance, comparison criteria, and practical PCB considerations to support faster component selection. It also distinguishes true same-footprint alternatives from devices that differ in resolution, channel count, conversion rate, or package and therefore may require redesign.

드롭인 대체품: ADS7841EB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADS7841EB (동일 폼 팩터 및 풋프린트) — 차이점: Typical Power Dissipation, Package, Missing Codes, Number of Input Channels, Resolution.

Texas Instruments
Typical Power Dissipation: 2 mW at 200 kHz and +5 V supply
Missing Codes: No missing codes
Number of Input Channels: 4 channels
비교 대상: ADS7841EB →
Texas Instruments
Typical Power Dissipation: 2 mW at 200 kHz, +5 V
Package: 16-pin SSOP (DBQ)
Missing Codes: None guaranteed

ADS7841E

✅ 드롭인
Texas Instruments
📦 16-pin SSOP
12 bits, programmable to 8 bits · 4 channels · 4 single-ended or 2 differential inputs · Successive-approximation-register ADC · 200 kHz · 2 mW at 200 kHz and +5 V supply · 100 mV to VCC · 0 V to VREF

가격 문의

데이터시트 보기 →

ADS7841ES/2K5

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-pin SSOP
12 bits (programmable to 8 bits) · 4 single-ended or 2 differential · 200 kHz max · 3.75 µs typical · SAR (Successive Approximation Register) · ±1 LSB · ±1 LSB · None guaranteed

가격 문의

데이터시트 보기 →

ADS7841EG4

✅ 드롭인
📦 16-pin SSOP
Same 12-bit, 4-channel, and 200 ksample/s core specifications; ordering and packing suffix differs

📋 참조 대체품 (카탈로그에 없음)

ADS7841EB/2K5G4

✅ 드롭인
📦 16-pin SSOP
Identical ADS7841EB core device and electrical ratings; distinguished by the 2.5 k-unit reel ordering suffix

📋 참조 대체품 (카탈로그에 없음)

ADS7841EB 최대 정격 & 전기적 특성

ADC Type Successive-approximation sampling ADC
분해능 12 bits; programmable to 8 bits or 12 bits
Input Channels 4 single-ended or 2 differential
Conversion Rate 200 ksample/s
입력 전압 범위 0 V to VREF
Reference Voltage Range 100 mV to VCC
Integral Nonlinearity ±1 LSB maximum
Differential Nonlinearity ±1 LSB maximum
Signal-to-Noise and Distortion 72 dB
Typical Power Dissipation 2 mW at 200 kHz throughput and 5 V supply
Supply Configuration Single supply
Serial Interface SPI-compatible synchronous serial interface
동작 온도 범위 -40 °C to +85 °C
패키지 16-pin SSOP
실장 유형 Surface mount
RoHS 상태 RoHS-compliant
Lead-Free Status Lead-free

ADS7841EB 핀 구성

SSOP-16 Package Pinout Diagram SSOP-16 3.9x6.0mm, P0.635mm, JEDEC MO-150. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SSOP-16
핀 1 VREF — External reference input
핀 2 REFS+ — Positive reference input
핀 3 REFS- — Negative reference input
핀 4 GND — Analog ground
핀 5 DNC — Do not connect
핀 6 CH0 — Analog input channel 0
핀 7 CH1 — Analog input channel 1
핀 8 CH2 — Analog input channel 2
핀 9 CH3 — Analog input channel 3
핀 10 CS — Chip-select input
핀 11 SCLK — Serial clock input
핀 12 DIN — Serial data input
핀 13 DOUT — Serial data output
핀 14 XFR — Data-transfer signal
핀 15 VCC — Analog power supply
핀 16 DGND — Digital ground

일반적인 애플리케이션

ADS7841EB 적합 용도: 6 애플리케이션s: Resistive Touch-Screen Sensing, Industrial Sensor Acquisition, Potentiometer and Control Panel, Battery-Powered Monitoring, Communications Equipment, Data Acquisition Modules.

📱

Resistive Touch-Screen Sensing

The ADS7841EB fits resistive touch-screen sensing because its four single-ended input channels can support panel-coordinate measurement while its 12-bit resolution preserves useful position detail. The converter can operate at 12 bits for maximum resolution or in its programmable 8-bit mode when faster data transfer is sufficient. Place the converter, reference network, and input protection close to the touch-panel connector, and verify acquisition settling against the panel resistance. The 200 ksample/s conversion capability provides ample headroom for scanning x and y coordinates while the 16-pin SSOP package supports compact control hardware.

🏭

Industrial Sensor Acquisition

The ADS7841EB is appropriate for acquiring several low-bandwidth industrial sensor outputs through its four single-ended channels. A 200 ksample/s successive-approximation converter provides sufficient speed for temperature, pressure, position, and resistive-sensor monitoring without requiring a parallel data bus. Its 12-bit resolution and ±1 LSB maximum INL and DNL characteristics support repeatable measurement, while the programmable 8-bit mode can reduce serial traffic. Differential operation is also available when a sensor benefits from two inputs and common-mode rejection, subject to the complete input and reference design.

🔧

Potentiometer and Control Panel

The ADS7841EB can digitize potentiometer wipers, rotary controls, and other resistive dividers used in compact control panels. Four single-ended inputs allow multiple panel controls to share one converter, and the 200 ksample/s rate supports responsive scanning. The selectable 8-bit or 12-bit resolution lets a system choose lower serial overhead for ordinary controls while retaining 12-bit precision where position resolution matters. Reference stability and source impedance are important because both affect absolute code accuracy, so the external divider and reference network should be placed close to the converter.

⚡

Battery-Powered Monitoring

The ADS7841EB is useful in portable battery-powered equipment that must monitor supply voltage, current-related sensor outputs, or other slowly changing analog quantities. Typical power dissipation is 2 mW at a 200 kHz throughput rate with a 5 V supply, and the converter's programmable 8-bit mode can reduce communication overhead in designs that do not require full 12-bit precision. The 16-pin SSOP package minimizes board area, but average power should be calculated from the actual sample rate, conversion duration, idle periods, reference consumption, and host-controller activity rather than from the throughput-rate figure alone.

🌐

Communications Equipment

The ADS7841EB can serve as a compact front-end ADC in communications equipment requiring monitoring of supply rails, amplifier levels, or control voltages. Its four selectable channels support sequential measurement, and the synchronous serial interface limits host-controller pin requirements. For RF-adjacent measurement circuits, the reference and analog input layout should be isolated from fast digital return currents, while the 12-bit mode should be reserved for measurements that need its full code width. The stated 72 dB SINAD gives a useful starting point for assessing dynamic performance, while actual system noise depends on the reference, source impedance, layout, and bandwidth.

🖥️

Data Acquisition Modules

The ADS7841EB is appropriate for compact, multi-channel data-acquisition modules that prioritize low component count and serial connectivity. Four channels can be scanned sequentially at up to 200 ksample/s, while 12-bit resolution supports measurements requiring 4096 discrete code levels. The synchronous serial interface and 16-pin SSOP package simplify connections to a microcontroller or embedded controller. For acquisition accuracy, use an appropriate reference, allow the sample-and-hold input to settle, account for source impedance, and calibrate offset and gain if the measured system requires higher end-to-end precision than the converter's intrinsic INL specification.

추천 제품 요약

ADS7841E Texas Instruments 사용처: Resistive Touch-Screen Sensing, Industrial Sensor Acquisition, Battery-Powered Monitoring ADS7841EB Texas Instruments 사용처: Resistive Touch-Screen Sensing, Industrial Sensor Acquisition, Potentiometer and Control Panel, Battery-Powered Monitoring, Communications Equipment, Data Acquisition Modules ADS7841EG4 Same-family control-panel ADC option 사용처: Potentiometer and Control Panel ADS7841ES Same-family communications monitoring ADC option 사용처: Communications Equipment ADS7841EB/2K5G4 Same-core device with a 2.5 k-unit reel ordering suffix 사용처: Data Acquisition Modules
What are the key specifications of ADS7841EB that engineers should know?
The ADS7841EB is a 12-bit, 4-channel sampling ADC with a 200 ksample/s maximum conversion rate, programmable 8-bit or 12-bit resolution, and a synchronous serial interface. According to the Texas Instruments ADS7841 datasheet, it supports four single-ended or two differential inputs, ±1 LSB maximum INL and DNL, no missing codes, 72 dB SINAD, and a 16-pin SSOP package. Typical power dissipation is 2 mW at a 200 kHz throughput rate with a 5 V supply.
What is the operating voltage of ADS7841EB?
The ADS7841EB uses a single supply and its reference voltage can be varied from 100 mV to VCC, producing an analog input range of 0 V to VREF. The manufacturer datasheet confirms the reference and input relationships, but it does not establish the complete allowable supply-voltage range in the cited product summary. Use the electrical-characteristics table in the Texas Instruments datasheet before selecting supply rails or designing input protection.
How many channels and bits does ADS7841EB have?
The ADS7841EB provides four analog input channels and a nominal resolution of 12 bits. Its serial interface can be programmed for either 8-bit or 12-bit operation, according to the Texas Instruments product page and datasheet. The converter supports four single-ended inputs or two differential inputs, making it suitable for scanning several sensors or measuring one differential source through two channels.
Where can I download the ADS7841EB datasheet PDF?
The official ADS7841EB datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7841.pdf. The manufacturer document contains the electrical characteristics, pin descriptions, operating information, and application details for the ADS7841 family. Because ADS7841EB is an orderable ADS7841 configuration, engineers should verify the ordering-information table before applying notes that refer to another package or temperature option.
Where can I find the ADS7841EB pinout?
The ADS7841EB pinout is published in the pin-configuration and pin-description sections of the Texas Instruments ADS7841 datasheet. The device is a 16-pin SSOP with four analog inputs, power and reference connections, ground pins, and synchronous serial-interface signals. When laying out the PCB, use the pin-description table to distinguish analog, reference, digital, and ground connections rather than relying on a generic 16-pin symbol.
What is the conversion rate of ADS7841EB?
The ADS7841EB supports a maximum conversion throughput of 200 ksample/s. According to the manufacturer datasheet, its typical power dissipation is 2 mW when operating at that throughput rate with a 5 V supply. The usable acquisition rate also depends on serial-clock timing, acquisition time, reference settling, and the host controller, so the complete system timing should be checked rather than treating 200 ksample/s as an unconditional system-level sample rate.
Is ADS7841EB suitable for resistive touch-screen applications?
Yes, the ADS7841EB is suitable for resistive touch-screen sensing because it provides four single-ended input channels, 12-bit resolution, programmable lower-resolution operation, and a 200 ksample/s conversion rate. Its 16-pin SSOP package also supports compact touch-screen controller designs. The external resistor network, panel excitation method, reference accuracy, and acquisition settling must be designed to match the panel and control-panel requirements.
ADS7841EB vs ADS7841E — which is the better choice?
ADS7841EB and ADS7841E are closely related 12-bit, 4-channel, 200 ksample/s ADS7841-family devices, but their orderable suffixes must be checked against the manufacturer's ordering table before substitution. The verified product listing identifies ADS7841E as a 16-SSOP device with the same principal conversion characteristics. Confirm the exact package dimensions, temperature range, and ordering suffix for ADS7841EB in the manufacturer datasheet before treating ADS7841E as a production replacement.
When should I choose ADS7841EB over ADS7841ES?
Choose ADS7841EB when its specified SSOP package and ordering details fit the PCB footprint and environmental requirements. ADS7841ES is a closely related ADS7841-family configuration listed as an alternate source, but it uses a different 16-pin package designation. The decision should therefore be based on confirmed mechanical compatibility, temperature grade, availability, and lifecycle requirements rather than only the shared 12-bit, 4-channel, 200 ksample/s specifications.
Is ADS7841EB the same as ADS7841EG4?
The ADS7841EB and ADS7841EG4 share the ADS7841 family's core 12-bit, 4-channel, 200 ksample/s conversion architecture and are associated with the 16-SSOP package family. Their orderable suffixes can encode different packing, marking, or regional ordering conditions, so they should not be treated as identical solely from the core electrical specifications. Confirm the full ordering information and mechanical drawing in the Texas Instruments datasheet before substitution.
What can replace ADS7841EB as a drop-in ADC?
The closest documented alternatives are ADS7841E, ADS7841ES, and ADS7841EG4, all from the ADS7841 family and associated with 16-pin packages. A true drop-in replacement still requires an exact package match, matching pin functions, compatible supply and reference limits, and an acceptable temperature grade. Because no cross-brand candidate with verified pin compatibility was identified, the manufacturer ordering table and footprint drawings must be checked before approving a substitution.
What is the best ADS7841-family replacement for ADS7841EB?
ADS7841E is the closest functional candidate within the documented Texas Instruments family because it has the same 12-bit, 4-channel, 200 ksample/s conversion characteristics and a 16-SSOP listing. ADS7841ES and ADS7841EG4 provide additional orderable-family choices, but package interpretation must be confirmed. No cross-brand equivalent can be recommended as a drop-in without verified pin-level and parametric compatibility information.
How much power does ADS7841EB consume during operation?
The Texas Instruments ADS7841 datasheet lists typical power dissipation of 2 mW at a 200 kHz throughput rate with a 5 V supply. This is a typical operating figure rather than a universal maximum across every supply, reference, conversion-rate, and digital-interface condition. For battery-powered designs, calculate the average energy per conversion and include standby, reference, and digital-interface activity in the complete power budget.
Where can I buy ADS7841EB and how much does it cost?
Use the Request a Quote form on this page to request current ADS7841EB pricing, stock, minimum order quantity, and lead time. The form provides a consistent purchasing channel without embedding a static price that may become outdated. Commercial planning should also confirm the exact 16-SSOP ordering configuration and any required reel or cut-tape packaging before releasing the purchase order.
What is the lead time for ADS7841EB?
Current ADS7841EB lead time should be requested through the Request a Quote form on this page because it can change with manufacturer inventory, package configuration, order quantity, and supply conditions. For production planning, provide the required quantity, target date, and exact package or reel format. The device's active lifecycle status does not by itself guarantee immediate allocation for every order quantity.

엔지니어링 참조 데이터: ADS7841EB — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ADS7841EB when a compact 16-SSOP board needs four 12-bit ADC inputs, serial connectivity, and a conversion rate up to 200 ksample/s. It is especially suitable for resistive touch panels, control-panel potentiometers, industrial sensors, and portable monitoring where the 2 mW typical dissipation figure at 200 kHz and 5 V helps control the power budget. ADS7841E is the closest documented alternative when its ordering suffix and package details fit the production design. ADS7841EG4 is another same-family option whose ordering, marking, and packing details must be reconciled with the target. ADS7841ES offers a closely related family configuration but requires confirmation of the exact package and ordering interpretation. ADS7841EB/2K5G4 represents the same core device with a reel-oriented ordering suffix. For any substitution, verify pin functions, temperature grade, reference limits, and the mechanical drawing rather than relying only on resolution and conversion rate.

대체품과의 비교

파라미터 이 제품 ADS7841E ADS7841ES ADS7841EG4 ADS7841EB/2K5G4
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bits, programmable to 8 bits or 12 bits 12 bits, programmable to 8 bits or 12 bits 12 bits, programmable to 8 bits or 12 bits 12 bits, programmable to 8 bits or 12 bits 12 bits, programmable to 8 bits or 12 bits
Input Channels 4 single-ended or 2 differential 4 single-ended or 2 differential 4 single-ended or 2 differential 4 single-ended or 2 differential 4 single-ended or 2 differential
Conversion Rate 200 ksample/s 200 ksample/s 200 ksample/s 200 ksample/s 200 ksample/s
ADC Architecture Successive-approximation sampling ADC Successive-approximation sampling ADC Successive-approximation sampling ADC Successive-approximation sampling ADC Successive-approximation sampling ADC
Integral Nonlinearity ±1 LSB maximum ±1 LSB maximum ±1 LSB maximum ±1 LSB maximum ±1 LSB maximum
Differential Nonlinearity ±1 LSB maximum ±1 LSB maximum ±1 LSB maximum ±1 LSB maximum ±1 LSB maximum
SINAD 72 dB 72 dB 72 dB 72 dB 72 dB
Reference Voltage Range 100 mV to VCC 100 mV to VCC 100 mV to VCC 100 mV to VCC 100 mV to VCC
Typical Power Dissipation 2 mW at 200 kHz throughput and 5 V supply 2 mW at 200 kHz throughput and 5 V supply 2 mW at 200 kHz throughput and 5 V supply 2 mW at 200 kHz throughput and 5 V supply 2 mW at 200 kHz throughput and 5 V supply

주요 차별점

  • Four-channel acquisition with selectable differential operation (vs ADS7841E)
  • Programmable output resolution supports bandwidth control (vs ADS7841EG4)
  • Low typical operating dissipation for a four-channel ADC (vs ADS7841ES)

설계 노트

Place the reference-network components and analog-input protection close to the ADC pins, and route CH0 through CH3 away from the SCLK, DIN, and DOUT paths. Keep the analog ground return continuous beneath the converter where practical and connect digital returns to the intended quiet ground point. A compact layout limits pickup of serial-interface energy and helps the converter receive an analog voltage that has settled before each conversion.

Design the source impedance and acquisition network so the sampled input can settle within the converter's acquisition interval. A resistive divider or sensor with excessive output impedance may not reach the required accuracy at the selected conversion rate. If the source cannot settle quickly, reduce the sampling rate, add an appropriate buffer, or revise the external network. The 12-bit resolution should not be used to compensate for incomplete analog settling, because that creates repeatable code error rather than additional accuracy.

Budget power using the actual operating state rather than the 200 ksample/s maximum alone. The manufacturer lists typical dissipation of 2 mW at a 200 kHz throughput rate with a 5 V supply, but a system that samples intermittently may spend substantial time idle. Include reference-circuit consumption, digital-interface activity, and leakage in the average-power calculation. Select the supply and reference components so their operating ranges remain valid across temperature and supply tolerance.

Do not substitute a converter based only on channel count and resolution. Confirm pin names, pin numbering, package drawing, reference limits, input range, conversion timing, and serial protocol. A same-family orderable suffix can alter packing, marking, temperature treatment, or regional ordering conditions. Use the manufacturer ordering-information table to establish equivalence and preserve the exact 16-pin SSOP footprint on an existing PCB.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

RoHS-compliant and lead-free status are stated in the product listing for ADS7841EB. No automotive qualification, halogen-free declaration, or conflict-minerals statement was identified.

관련 검색

ADS7841EB datasheet ADS7841EB datasheet pdf ADS7841EB pinout ADS7841EB specifications ADS7841EB price ADS7841EB stock ADS7841EB equivalent ADS7841EB replacement ADS7841EB footprint ADS7841EB vs ADS7841E ADS7841 12-bit 4-channel ADC ADS7841 200ksps SPI ADC Texas Instruments ADS7841EB ADS7841EB SSOP-16 pinout

관련 부품 & 용어

Texas Instruments ADS7841EB ADS7841E ADS7841ES ADS7841EG4 ADS7841EB/2K5G4 analog-to-digital converter ADC successive-approximation ADC sampling ADC serial-output ADC 12-bit resolution 8-bit resolution 4-channel ADC 200 ksample/s synchronous serial interface SPI VREF differential input single-ended input INL DNL SINAD SSOP-16 surface-mount package resistive touch screen industrial sensor acquisition RoHS lead-free
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기