ADS7841EB - 12-Bit 4-Channel 200ksps ADC | Texas Instruments
MPN: ADS7841EB ✓ Hoạt độngADS7841EB Tóm tắt
An ADC converts continuous analog voltages into digital values for measurement, control, and data-acquisition systems. The ADS7841 belongs to the sampling ADC hierarchy, combining an internal sample-and-hold stage with a successive-approximation converter and a synchronous serial interface. This positioning makes it suitable for compact embedded systems that require multiple analog inputs without the complexity of a high-speed parallel ADC.
The principal features include 12-bit nominal resolution, four selectable analog channels, and a maximum throughput of 200 ksample/s. The converter provides ±1 LSB maximum integral and differential nonlinearity, no missing codes, and 72 dB SINAD according to the manufacturer datasheet. It also supports single-supply operation and programmable 8-bit or 12-bit conversion resolution, allowing a faster communication mode when full-resolution output is not required.
The ADS7841 uses a synchronous serial interface, identified in product listings as SPI-compatible, for receiving conversion commands and transferring converted data. This interface reduces the number of signal paths required between the ADC and a microcontroller. Although the sampling architecture provides useful conversion throughput, output-word latency and the selected serial clock must be considered when establishing the overall sampling rate in a complete acquisition system.
Typical uses include resistive touch-screen sensing, industrial control panels, potentiometer and sensor measurement, battery monitoring, and compact data-acquisition modules. The four single-ended inputs are useful when several analog quantities must be scanned sequentially, while differential-input operation helps reject common-mode noise in suitable sensor interfaces. The low 2 mW typical power dissipation at a 200 kHz throughput rate and 5 V supply supports space-constrained and portable equipment.
Design attention should focus on reference stability, input-source settling, serial timing, and PCB grounding. Place input and reference capacitors close to their associated pins, maintain a quiet return path, and allow sufficient acquisition time for the source and sample-and-hold network to settle. The manufacturer pin-description table should be used directly when assigning PCB tracks and checking the exposed package constraints.
This product page combines the manufacturer electrical characteristics, package details, commercial guidance, comparison criteria, and practical PCB considerations to support faster component selection. It also distinguishes true same-footprint alternatives from devices that differ in resolution, channel count, conversion rate, or package and therefore may require redesign.
Bộ thay thế dễ dàng lắp đặt cho ADS7841EB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADS7841EB (cùng hình factor và footprint) — khác nhau ở Typical Power Dissipation, Package, Missing Codes, Number of Input Channels, Resolution.
ADS7841E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADS7841ES/2K5
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ADS7841EG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7841EB/2K5G4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS7841EB Tỷ lệ tối đa & tính chất điện
| ADC Type | Successive-approximation sampling ADC |
| Độ phân giải | 12 bits; programmable to 8 bits or 12 bits |
| Input Channels | 4 single-ended or 2 differential |
| Conversion Rate | 200 ksample/s |
| Phạm vi điện áp đầu vào | 0 V to VREF |
| Reference Voltage Range | 100 mV to VCC |
| Integral Nonlinearity | ±1 LSB maximum |
| Differential Nonlinearity | ±1 LSB maximum |
| Signal-to-Noise and Distortion | 72 dB |
| Typical Power Dissipation | 2 mW at 200 kHz throughput and 5 V supply |
| Supply Configuration | Single supply |
| Serial Interface | SPI-compatible synchronous serial interface |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| Hộp | 16-pin SSOP |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | RoHS-compliant |
| Lead-Free Status | Lead-free |
Cấu hình chân ADS7841EB
| Chân 1 | VREF — External reference input |
| Chân 2 | REFS+ — Positive reference input |
| Chân 3 | REFS- — Negative reference input |
| Chân 4 | GND — Analog ground |
| Chân 5 | DNC — Do not connect |
| Chân 6 | CH0 — Analog input channel 0 |
| Chân 7 | CH1 — Analog input channel 1 |
| Chân 8 | CH2 — Analog input channel 2 |
| Chân 9 | CH3 — Analog input channel 3 |
| Chân 10 | CS — Chip-select input |
| Chân 11 | SCLK — Serial clock input |
| Chân 12 | DIN — Serial data input |
| Chân 13 | DOUT — Serial data output |
| Chân 14 | XFR — Data-transfer signal |
| Chân 15 | VCC — Analog power supply |
| Chân 16 | DGND — Digital ground |
Ứng dụng tiêu biểu
ADS7841EB phù hợp cho 6 Áp dụngs: Resistive Touch-Screen Sensing, Industrial Sensor Acquisition, Potentiometer and Control Panel, Battery-Powered Monitoring, Communications Equipment, Data Acquisition Modules.
Resistive Touch-Screen Sensing
The ADS7841EB fits resistive touch-screen sensing because its four single-ended input channels can support panel-coordinate measurement while its 12-bit resolution preserves useful position detail. The converter can operate at 12 bits for maximum resolution or in its programmable 8-bit mode when faster data transfer is sufficient. Place the converter, reference network, and input protection close to the touch-panel connector, and verify acquisition settling against the panel resistance. The 200 ksample/s conversion capability provides ample headroom for scanning x and y coordinates while the 16-pin SSOP package supports compact control hardware.
Được đề xuất
Industrial Sensor Acquisition
The ADS7841EB is appropriate for acquiring several low-bandwidth industrial sensor outputs through its four single-ended channels. A 200 ksample/s successive-approximation converter provides sufficient speed for temperature, pressure, position, and resistive-sensor monitoring without requiring a parallel data bus. Its 12-bit resolution and ±1 LSB maximum INL and DNL characteristics support repeatable measurement, while the programmable 8-bit mode can reduce serial traffic. Differential operation is also available when a sensor benefits from two inputs and common-mode rejection, subject to the complete input and reference design.
Được đề xuất
Potentiometer and Control Panel
The ADS7841EB can digitize potentiometer wipers, rotary controls, and other resistive dividers used in compact control panels. Four single-ended inputs allow multiple panel controls to share one converter, and the 200 ksample/s rate supports responsive scanning. The selectable 8-bit or 12-bit resolution lets a system choose lower serial overhead for ordinary controls while retaining 12-bit precision where position resolution matters. Reference stability and source impedance are important because both affect absolute code accuracy, so the external divider and reference network should be placed close to the converter.
Được đề xuất
Battery-Powered Monitoring
The ADS7841EB is useful in portable battery-powered equipment that must monitor supply voltage, current-related sensor outputs, or other slowly changing analog quantities. Typical power dissipation is 2 mW at a 200 kHz throughput rate with a 5 V supply, and the converter's programmable 8-bit mode can reduce communication overhead in designs that do not require full 12-bit precision. The 16-pin SSOP package minimizes board area, but average power should be calculated from the actual sample rate, conversion duration, idle periods, reference consumption, and host-controller activity rather than from the throughput-rate figure alone.
Được đề xuất
Communications Equipment
The ADS7841EB can serve as a compact front-end ADC in communications equipment requiring monitoring of supply rails, amplifier levels, or control voltages. Its four selectable channels support sequential measurement, and the synchronous serial interface limits host-controller pin requirements. For RF-adjacent measurement circuits, the reference and analog input layout should be isolated from fast digital return currents, while the 12-bit mode should be reserved for measurements that need its full code width. The stated 72 dB SINAD gives a useful starting point for assessing dynamic performance, while actual system noise depends on the reference, source impedance, layout, and bandwidth.
Được đề xuất
Data Acquisition Modules
The ADS7841EB is appropriate for compact, multi-channel data-acquisition modules that prioritize low component count and serial connectivity. Four channels can be scanned sequentially at up to 200 ksample/s, while 12-bit resolution supports measurements requiring 4096 discrete code levels. The synchronous serial interface and 16-pin SSOP package simplify connections to a microcontroller or embedded controller. For acquisition accuracy, use an appropriate reference, allow the sample-and-hold input to settle, account for source impedance, and calibrate offset and gain if the measured system requires higher end-to-end precision than the converter's intrinsic INL specification.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADS7841EB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADS7841E | ADS7841ES | ADS7841EG4 | ADS7841EB/2K5G4 |
|---|---|---|---|---|---|
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bits, programmable to 8 bits or 12 bits | 12 bits, programmable to 8 bits or 12 bits | 12 bits, programmable to 8 bits or 12 bits | 12 bits, programmable to 8 bits or 12 bits | 12 bits, programmable to 8 bits or 12 bits |
| Input Channels | 4 single-ended or 2 differential | 4 single-ended or 2 differential | 4 single-ended or 2 differential | 4 single-ended or 2 differential | 4 single-ended or 2 differential |
| Conversion Rate | 200 ksample/s | 200 ksample/s | 200 ksample/s | 200 ksample/s | 200 ksample/s |
| ADC Architecture | Successive-approximation sampling ADC | Successive-approximation sampling ADC | Successive-approximation sampling ADC | Successive-approximation sampling ADC | Successive-approximation sampling ADC |
| Integral Nonlinearity | ±1 LSB maximum | ±1 LSB maximum | ±1 LSB maximum | ±1 LSB maximum | ±1 LSB maximum |
| Differential Nonlinearity | ±1 LSB maximum | ±1 LSB maximum | ±1 LSB maximum | ±1 LSB maximum | ±1 LSB maximum |
| SINAD | 72 dB | 72 dB | 72 dB | 72 dB | 72 dB |
| Reference Voltage Range | 100 mV to VCC | 100 mV to VCC | 100 mV to VCC | 100 mV to VCC | 100 mV to VCC |
| Typical Power Dissipation | 2 mW at 200 kHz throughput and 5 V supply | 2 mW at 200 kHz throughput and 5 V supply | 2 mW at 200 kHz throughput and 5 V supply | 2 mW at 200 kHz throughput and 5 V supply | 2 mW at 200 kHz throughput and 5 V supply |
Bảo phân biệt quan trọng
- Four-channel acquisition with selectable differential operation (vsADS7841E)
- Programmable output resolution supports bandwidth control (vsADS7841EG4)
- Low typical operating dissipation for a four-channel ADC (vsADS7841ES)
Ghi chú thiết kế
Place the reference-network components and analog-input protection close to the ADC pins, and route CH0 through CH3 away from the SCLK, DIN, and DOUT paths. Keep the analog ground return continuous beneath the converter where practical and connect digital returns to the intended quiet ground point. A compact layout limits pickup of serial-interface energy and helps the converter receive an analog voltage that has settled before each conversion.
Design the source impedance and acquisition network so the sampled input can settle within the converter's acquisition interval. A resistive divider or sensor with excessive output impedance may not reach the required accuracy at the selected conversion rate. If the source cannot settle quickly, reduce the sampling rate, add an appropriate buffer, or revise the external network. The 12-bit resolution should not be used to compensate for incomplete analog settling, because that creates repeatable code error rather than additional accuracy.
Budget power using the actual operating state rather than the 200 ksample/s maximum alone. The manufacturer lists typical dissipation of 2 mW at a 200 kHz throughput rate with a 5 V supply, but a system that samples intermittently may spend substantial time idle. Include reference-circuit consumption, digital-interface activity, and leakage in the average-power calculation. Select the supply and reference components so their operating ranges remain valid across temperature and supply tolerance.
Do not substitute a converter based only on channel count and resolution. Confirm pin names, pin numbering, package drawing, reference limits, input range, conversion timing, and serial protocol. A same-family orderable suffix can alter packing, marking, temperature treatment, or regional ordering conditions. Use the manufacturer ordering-information table to establish equivalence and preserve the exact 16-pin SSOP footprint on an existing PCB.
Thông tin tuân thủ
RoHS-compliant and lead-free status are stated in the product listing for ADS7841EB. No automotive qualification, halogen-free declaration, or conflict-minerals statement was identified.