Texas Instruments

ADS820U/1K - 10-Bit 20-MSPS ADC | Texas Instruments

부품 번호: ADS820U/1K ✓ 활성
28-pin SOIC Package
MOQ: 1 |

ADS820U/1K 개요

The Texas Instruments ADS820U/1K is a 10-bit, 20-MSPS monolithic analog-to-digital converter with one pipelined input in a 28-pin SOIC package. It accepts single-ended or differential analog signals and incorporates a 10-bit quantizer, an internal track-and-hold circuit, an internal reference, and a power-down feature. The monolithic converter uses a small-geometry CMOS process.

An analog-to-digital converter is a data-acquisition IC that converts a continuous analog voltage into a numeric code for processing by a microcontroller, DSP, FPGA, or embedded control system. The ADS820 belongs to the ADC hierarchy, where resolution describes the number of representable levels and sampling rate describes how quickly the input is captured. A 10-bit converter provides 1,024 possible codes, while 20 MSPS supports high-speed measurement, waveform capture, communications, and industrial control functions.

Key characteristics include a 10-bit conversion resolution, a maximum conversion rate of 20 million samples per second, one analog input channel, and a 28-SOIC surface-mount package. The internal track-and-hold stage captures the analog input for conversion, and the integrated reference simplifies the external analog circuitry. A power-down function supports systems that need to reduce consumption when conversion activity is not required.

The converter uses a pipelined architecture, allowing successive conversion stages to support the device's 20-MSPS throughput. This is useful for acquisition blocks where sampling cadence must be predictable. The 10-bit result provides a balance between data throughput and circuit complexity, making the ADS820U/1K suitable for designs that need faster sampling than a general-purpose low-speed ADC without requiring a high-resolution high-speed converter.

Typical uses include industrial process measurement, data acquisition, control-loop monitoring, waveform digitization, communications receivers, and embedded signal processing. In these systems, the ADC can provide a binary output representing the sampled analog voltage to a parallel digital processor or interface logic. Differential input operation can also support noise-resistant sensing when the source can present a balanced signal.

When laying out a design, place input, reference, decoupling, and digital-interface connections according to the manufacturer datasheet. Pay particular attention to source impedance, sampling-clock timing, output timing, and grounding. Because the converter combines analog acquisition with digital signals, separating analog and digital return paths and minimizing clock coupling can improve repeatability and reduce conversion noise.

This page organizes the ADS820U/1K specifications, package information, sourcing route, and application guidance into one engineering-focused reference. It also distinguishes the verified device characteristics from specifications that must be confirmed in the manufacturer datasheet before layout, timing, or signal-chain calculations are performed.

드롭인 대체품: ADS820U/1K — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADS820U/1K (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Input Type, Internal Reference, Power-Down Feature.

Texas Instruments
Architecture: Pipelined ADC
Input Type: 1 input, differential or single-ended
Internal Reference: Included

ADS820U

✅ 드롭인
Texas Instruments
📦 28-SOIC
10 bit · 20 MSPS · 1 input, differential or single-ended · Pipelined ADC · +5 V single supply · Included · Internal track-and-hold · Included

가격 문의

데이터시트 보기 →

ADS820U/1K 최대 정격 & 전기적 특성

Converter Type Monolithic pipeline ADC
분해능 10 bit
샘플링 속도 20 MSPS
Number of Input Channels 1 channel
Input Type Single-ended or differential
Architecture Pipelined
Process Technology Small-geometry CMOS
Internal Track-and-Hold Yes
Internal Reference Yes
Power-Down Feature Yes
패키지 28-pin SOIC
실장 유형 Surface mount
동작 온도 -40°C to +85°C
Quantity of Binary Output Codes 1,024 codes

ADS820U/1K 28-pin soic 핀 구성 가이드

ADS820U/1K(28-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

ADS820U/1K의 28-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADS820U/1K.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADS820U/1K 적합 용도: 6 애플리케이션s: Industrial Process Data Acquisition, Communications Receiver Digitization, Waveform Digitization, Embedded Control and Monitoring, Audio and Vibration Signal Monitoring, Automated Test and Measurement.

🏭

Industrial Process Data Acquisition

The ADS820U/1K fits industrial acquisition cards that sample analog process signals at up to 20 MSPS. A 10-bit result provides 1,024 digital codes, allowing a controller to capture rapidly changing sensor, actuator, or bridge signals without implementing a separate track-and-hold circuit. The internal reference and single-ended or differential input support can simplify the analog front end. In a factory design, the converter should sit close to the input connector and protection network, while clocks and digital outputs should be routed away from sensitive analog nodes. Differential wiring is preferable for long cable runs or noisy environments because it can reject common-mode disturbance.

🌐

Communications Receiver Digitization

The ADS820U/1K is appropriate for communications receivers requiring periodic sampling of a received analog waveform at rates up to 20 MSPS. The pipelined architecture supports continuous sampling, while the internal track-and-hold reduces the number of external sampling components needed ahead of the converter. In a receiver implementation, the 10-bit output can feed packetization, demodulation, or FPGA-based filtering logic. The design must account for the permitted input bandwidth and conversion timing listed in the TI datasheet, because those limits determine whether full-scale signal energy remains within the converter’s usable range.

📺

Waveform Digitization

A 20-MSPS sampling rate makes the ADS820U/1K useful for capturing repetitive waveforms rather than slow process trends. The 10-bit converter can represent each sample with one of 1,024 codes, and its internal track-and-hold supports the sampling front end. In an oscilloscope-like or condition-monitoring subsystem, the ADC output can feed memory, a digital filter, or an FPGA for later analysis. The sampling clock should be derived from a stable low-jitter source, and input attenuation should be scaled so normal operating signals remain within the converter’s specified range without clipping.

🔧

Embedded Control and Monitoring

The ADS820U/1K can serve as the sensing element in a fast embedded control or diagnostic system when 10-bit resolution is sufficient. At 20 MSPS, it can sample transient events more quickly than a conventional slow ADC, while the power-down function allows a duty-cycled design to reduce activity between measurement bursts. A microcontroller or FPGA can receive the digital result and apply filtering, thresholds, or fault detection. Designers should verify the exact digital interface and output timing because the converter is not specified here by bus protocol; those details determine the required bridge logic and processor resources.

🎧

Audio and Vibration Signal Monitoring

The ADS820U/1K can digitize vibration, acoustic, or other wideband monitoring signals when a 10-bit measurement and 20-MSPS sampling rate meet the application requirements. Differential input operation can help reject common-mode noise when the transducer and analog front end are arranged for a balanced signal. The converter output may be processed by a DSP or FPGA for spectral analysis or event detection. Input conditioning remains important: use an anti-alias filter appropriate to the 20-MSPS sampling rate, establish the expected full-scale level, and keep the sampling clock and digital return paths separated from the transducer signal.

🧪

Automated Test and Measurement

The ADS820U/1K can act as the sampling front end in automated test equipment that must characterize changing analog conditions. Its 20-MSPS throughput supports fast test sequences, and the internal reference and track-and-hold reduce the number of external active components. A fixture controller can collect the 10-bit conversion results, apply calibration, and flag readings outside predetermined limits. For accurate measurements, account for reference tolerance, input leakage, settling time, clock timing, and board-level noise in the calibration model. Use the manufacturer application and timing information to determine whether a sampling switch, driver, or additional reference is required.

What is the ADS820U/1K?
The ADS820U/1K is a Texas Instruments 10-bit, 20-MSPS monolithic analog-to-digital converter in a 28-pin SOIC package. According to the TI product page and manufacturer datasheet, it combines a pipelined converter, internal track-and-hold circuit, internal reference, and power-down capability. It is intended for high-speed analog signal acquisition in industrial, communications, and embedded data-acquisition systems.
What resolution and sampling rate does the ADS820U/1K provide?
The ADS820U/1K provides 10-bit resolution and a maximum sampling rate of 20 million samples per second. Its 10-bit quantization produces 1,024 possible digital output codes. According to the TI manufacturer datasheet, the pipelined architecture supports the 20-MSPS conversion rate for applications requiring periodic sampling rather than slow, precision-only measurement.
Where can I download the ADS820U/1K datasheet PDF?
The official ADS820U/1K documentation is available through the TI ADS820 product page at https://www.ti.com/product/ADS820. Open the product page and select its datasheet document to review the electrical characteristics, timing diagrams, pin descriptions, input configuration, and recommended application circuit. Use the manufacturer document for final PCB routing and signal-integrity decisions.
Where is the ADS820U/1K pinout located?
The ADS820U/1K pinout is located in the pin-description table and package drawing in the TI ADS820 manufacturer datasheet. The device uses a 28-pin SOIC package with pin 1 at the standard top-left orientation. Assign analog inputs, reference connections, supply pins, grounds, clock pins, and digital outputs only after checking the exact pin numbers and exposed functions shown in that document.
Can the ADS820U/1K accept both single-ended and differential inputs?
Yes, the ADS820U/1K supports single-ended and differential analog input operation. According to the TI manufacturer datasheet, the input architecture includes an internal track-and-hold stage and accepts one analog input channel. Differential operation can improve common-noise rejection when the source is balanced, while single-ended operation can simplify circuitry for a grounded sensor or unipolar source.
What applications suit the ADS820U/1K?
The ADS820U/1K suits data-acquisition systems, industrial process measurement, communications receivers, waveform digitization, and embedded control loops. Its 20-MSPS rate supports rapid periodic sampling, while 10-bit resolution is appropriate for supervisory, diagnostic, or control signals. The internal reference, track-and-hold circuit, and power-down function help simplify the acquisition front end.
When should I choose the ADS820U/1K over a lower-speed ADC?
Choose the ADS820U/1K when the signal must be sampled at up to 20 MSPS or when a synchronized acquisition stream is more important than high-resolution slow measurement. Its 10-bit output contains 1,024 codes, so it is better suited to waveform and control applications than to designs requiring 16-bit or higher measurement resolution. Confirm output-interface timing against the digital processor.
ADS820U/1K vs ADS820U: which part should I select?
ADS820U/1K and ADS820U identify the same Texas Instruments converter family with different order suffixes, and the verified listings describe both as 10-bit, 20-MSPS, single-input ADCs in 28-SOIC packages. The /1K ordering code should be matched to the required manufacturer packing method and purchase conditions. Confirm the exact suffix, temperature range, and package marking before releasing a production order.
What is the best drop-in replacement for ADS820U/1K?
The closest identified same-package replacement is the Texas Instruments ADS820U, which uses the same 28-SOIC footprint and is listed as a 10-bit, 20-MSPS, single-input pipelined ADC. No verified cross-manufacturer part was shown to be both pin-compatible and parametrically equivalent to the ADS820U/1K. Verify power, reference, clock, timing, and output-interface details before treating ADS820U as a production substitute.
Can ADS820U replace ADS820U/1K on an existing PCB?
ADS820U can be considered only after confirming the exact ordering suffix and electrical configuration. Both parts are identified as Texas Instruments 10-bit, 20-MSPS ADCs in 28-SOIC packages, indicating a common footprint. The ADS820U/1K suffix may encode a manufacturer-specific packing option, so the customer’s actual incoming-part specification and tape-and-reel requirements must also be checked.
Is ADS820U/1K suitable for industrial data acquisition?
The ADS820U/1K is suitable for many industrial data-acquisition tasks because it provides 20-MSPS sampling, a -40°C to +85°C operating-temperature range, an internal reference, and single-ended or differential input capability. For factory equipment, confirm supply limits, EMC requirements, isolation strategy, connector protection, and calibration requirements in addition to temperature range.
What are the key specifications of ADS820U/1K that engineers should know?
The key ADS820U/1K specifications are 10-bit resolution, 20-MSPS conversion rate, one pipelined input, single-ended or differential operation, an internal track-and-hold circuit, an internal reference, power-down support, and a 28-pin SOIC package. According to the TI product page, the converter is monolithic and uses a small-geometry CMOS process. Supply voltage, input range, SNR, INL, DNL, and digital timing must be confirmed in the manufacturer datasheet.
Where can I buy ADS820U/1K online?
Use the Request a Quote form on this page to request ADS820U/1K availability, current unit pricing, quantity breaks, and lead time. The verified listings confirm the exact manufacturer part number as a Texas Instruments 28-SOIC ADC, but their visible search results do not provide a complete quantity-break table. The quote team can confirm the correct suffix, packing method, and current supply position.
What is the price of ADS820U/1K?
The current price of ADS820U/1K is not displayed in this page’s structured pricing because the visible listings do not contain qualifying quantity-break prices for the exact /1K suffix. Use the Request a Quote form on this page for current pricing, stock status, order multiples, and lead-time confirmation. Quote-based handling avoids publishing stale or suffix-mismatched commercial data.
Is ADS820U/1K in stock and what is its lead time?
Current stock and lead time for ADS820U/1K should be confirmed through the Request a Quote form on this page. Verified product listings identify the exact part as a Texas Instruments 28-SOIC ADC, but the visible results do not establish a dependable current inventory quantity or production lead time. Include your required quantity, date code policy, target price, and preferred packing method in the request.

엔지니어링 참조 데이터: ADS820U/1K — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ADS820U/1K when the design requires a 10-bit, 20-MSPS single-channel ADC in a 28-SOIC package and the specified ordering code matches the production BOM. Its internal track-and-hold circuit, internal reference, and power-down function make it suitable for compact acquisition, communications, waveform, and embedded-control blocks. The ADS820U is the closest identified same-package option because it shares the 10-bit resolution, 20-MSPS rate, and 28-SOIC format, but the missing /1K suffix must be reconciled with ordering and packing requirements. No verified cross-manufacturer drop-in was identified, so the ADS820U/1K remains the primary choice when exact sourcing identity matters. Before finalizing the selection, verify supply voltage, input range, reference accuracy, SNR, INL, DNL, digital timing, and interface requirements against the current TI manufacturer datasheet.

대체품과의 비교

파라미터 이 제품 ADS820U
Brand Texas Instruments Texas Instruments
Package 28-SOIC 28-SOIC - same package
Resolution 10 bit 10 bit
Sampling Rate 20 MSPS 20 MSPS
Input Channels 1 channel 1 channel
Architecture Pipelined Pipelined
Input Configuration Single-ended or differential Single-ended or differential
Internal Functions Internal track-and-hold, internal reference, power-down Internal track-and-hold, internal reference, power-down
Process Technology Small-geometry CMOS Small-geometry CMOS
Ordering Suffix /1K No /1K suffix

주요 차별점

  • Maintains the same core conversion specifications as the identified same-package option (vs ADS820U)
  • Uses the same 28-SOIC package outline for board-level reuse (vs ADS820U)
  • Integrates key acquisition functions (vs ADS820U)

설계 노트

Route the analog input directly to the converter and keep the input path short, with the external protection and conditioning network positioned close to the package. Place analog and digital grounds according to the TI datasheet ground configuration and provide a quiet return for the reference and supply connections. A 28-SOIC package is easy to route, but pin escapes on a fine-pitch board can still force long traces. Review the recommended layout in the manufacturer datasheet before fixing connector, reference, and digital-bus positions.

Use a low-jitter sampling clock and keep the clock route away from the analog input and reference nodes. The converter includes an internal track-and-hold stage, but the external driver and acquisition network still determine how faithfully the source voltage is captured. Confirm acquisition time, source-impedance limits, input bandwidth, and settling requirements in the TI manufacturer datasheet. If the source impedance is high, add a suitable buffer rather than relying on capacitive loading to correct the error.

Do not treat the 10-bit resolution as the complete accuracy specification. Offset, gain error, integral nonlinearity, differential nonlinearity, reference error, noise, and PCB effects can each affect the usable result. Also do not assume that the ADS820U and ADS820U/1K identifiers are interchangeable for purchasing without checking the customer’s suffix, packing, and traceability requirements. Validate the complete analog chain with representative signals and use the manufacturer’s timing and recommended application circuit as the layout reference.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ADS820U/1K ordering code. AEC-Q100 is not applicable to this industrial data-conversion product.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ADS820U/1K datasheet ADS820U/1K specifications ADS820U/1K pinout ADS820U/1K datasheet pdf Texas Instruments ADS820U/1K ADS820U/1K equivalent ADS820U/1K replacement ADS820U/1K vs ADS820U ADS820 10-bit 20-MSPS ADC ADS820 28-SOIC pinout ADS820 data acquisition application ADS820U/1K price ADS820U/1K stock

관련 부품 & 용어

Texas Instruments ADS820U/1K ADS820U ADS820 analog-to-digital converter ADC data-conversion IC semiconductor 10-bit resolution 20 MSPS pipelined ADC single-ended input differential input internal track-and-hold internal reference power-down feature small-geometry CMOS process 28-SOIC package SOIC package family surface-mount package industrial data acquisition communications receiver waveform digitization process measurement SMPTE
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기