ADSP-1012AJG - 12-Bit DSP Multiplier | Analog Devices | PGA-68
부품 번호: ADSP-1012AJG ✗ 단종ADSP-1012AJG 개요
A digital multiplier is a specialized semiconductor that multiplies two binary operands and presents the result on a parallel data bus. Unlike a general-purpose microprocessor or DSP, the ADSP-1012AJG provides a fixed arithmetic function that can reduce processor workload and simplify hardware pipelines. It belongs to the broader category of DSP peripherals and arithmetic integrated circuits, where fixed-function parallel processing can provide predictable timing and efficient throughput.
The verified part data identifies the ADSP-1012AJG as a 12-bit DSP multiplier in a CPGA68, hermetic-sealed PGA-68 package. The commercial temperature grade, square package shape, 68 terminals, and 5 V nominal operating voltage support use in equipment requiring a traditional through-hole ceramic package. The package is specified as approximately 27.89 mm by 27.89 mm in the marketplace data, although detailed mechanical tolerances are not supplied in the verified material.
The component provides a 24-bit output data bus and a maximum supply current of 60 mA. Its fixed multiplier architecture is suitable for digital filtering, modulation, correlation, scaling, and other real-time arithmetic operations where a parallel implementation is preferable to executing a multiply instruction in a general-purpose controller. The available verified records do not specify throughput, clock rate, input timing, logic levels, temperature limits, or output-drive characteristics.
Typical design roles include a communications signal-processing channel, an industrial control arithmetic block, a test and measurement data path, and a custom digital filter or correlator. System designers should verify the complete pinout and timing specifications against the manufacturer datasheet before layout, because the public verified results provide the package and basic function but not a complete pin-level description.
When designing around this part, use the manufacturer’s authoritative data sheet for pin assignment, control signals, input and output timing, and supply sequencing. The hermetically sealed PGA-68 package is mechanically different from modern leadless packages and requires a compatible through-hole PCB footprint, adequate clearance, and careful connector alignment.
드롭인 대체품: ADSP-1012AJG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADSP-1012AJG (동일 폼 팩터 및 풋프린트) — 차이점: Device Category, Package Dimensions, Package Type.
ADSP-1012ASG/883B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADSP-1012AJG 사양
| 기능 | 12-bit DSP multiplier |
| Multiplier Configuration | 12 x 12 CMOS multiplier |
| Output Data Bus Width | 24 bit |
| Nominal Supply Voltage | 5 V |
| Maximum Supply Current | 60 mA |
| Number of Terminals | 68 |
| Package Code | PGA |
| Package Type | CPGA68, hermetic sealed |
| Package Shape | Square |
| Package Dimensions | 27.89 mm x 27.89 mm |
| Temperature Grade | Commercial |
| 실장 유형 | Through-hole PGA |
| Process Technology | CMOS |
| Device Category | DSP peripheral, multiplier |
| Input Bit Width | 12 bit |
ADSP-1012AJG 27.89 mm x 27.89 mm 핀 구성 가이드
ADSP-1012AJG(27.89 mm x 27.89 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADSP-1012AJG.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADSP-1012AJG 적합 용도: 6 애플리케이션s: Digital Communications Signal Processing, Digital Filter and Correlator Arithmetic, Industrial Control and Automation, Test and Measurement Data Path, Legacy Interface and Signal Conditioning, Instrumentation and Embedded Arithmetic.
Digital Communications Signal Processing
The ADSP-1012AJG fits communications datapaths that require a dedicated 12 x 12 multiplication function. Its verified 24-bit output data bus can carry a full-width multiplication result into a parallel filter, correlator, or demodulation pipeline, while the 5 V nominal supply suits systems built around conventional 5 V logic. The fixed-function architecture can reduce the number of operations delegated to a host processor. Because the supplied records do not specify clock rate, input-output timing, or control signals, the circuit must be verified against the manufacturer datasheet before high-speed system integration.
추천
Digital Filter and Correlator Arithmetic
ADSP-1012AJG is applicable in fixed digital-filter or correlator implementations where parallel multiplication is a recurring operation. The verified 12 x 12 multiplier architecture and 24-bit result bus provide a direct arithmetic block for coefficient multiplication, sample correlation, and product-accumulate stages. Its dedicated function can simplify a hardware pipeline compared with software-only multiplication, although no verified throughput figure is available in the supplied data. System timing, latency, and bus-control compatibility therefore require confirmation from the authoritative Analog Devices documentation.
추천
Industrial Control and Automation
The ADSP-1012AJG can serve as a fixed arithmetic element in industrial control systems that repeatedly scale sensor or process-control values. Its commercial temperature grade and 5 V nominal supply support conventional industrial electronics, while the 12 x 12 multiplier handles two signed or unsigned operand widths depending on the device configuration. The hermetically sealed ceramic PGA package is mechanically suited to older through-hole control hardware. Before deployment, verify operating-temperature limits, supply tolerances, logic levels, and timing because those details are not established by the supplied search excerpts.
추천
Test and Measurement Data Path
ADSP-1012AJG is relevant to legacy test and measurement equipment that performs high-volume parallel arithmetic on digitized samples. A 12 x 12 multiplier and 24-bit output bus can support scaling, convolution, calibration, or reference calculations in a deterministic hardware pipeline. The component's fixed-function nature may be useful in instrumentation designed before general-purpose processors became capable of handling the workload. Exact acquisition timing and control-interface requirements are not included in the verified records, so engineers must consult the manufacturer datasheet and validate any board-level replacement.
추천
Legacy Interface and Signal Conditioning
The ADSP-1012AJG may be used as a parallel arithmetic engine within legacy interface boards where a controller must multiply two 12-bit values before converting or conditioning the result. Its 68-pin ceramic PGA package fits equipment designed around through-hole PGA footprints, and the listed 60 mA maximum supply current provides a basic supply-budget reference. The verified data does not specify output drive strength, signal-integrity timing, or isolation requirements. Those limitations make datasheet review essential before adding the device to new high-speed interfaces.
추천
Instrumentation and Embedded Arithmetic
ADSP-1012AJG is suitable for embedded arithmetic subsystems that require a fixed multiplier rather than a programmable general-purpose processor. The verified 12-bit operand configuration and 24-bit output bus can support scale-factor, point-and-shoot, and interpolation operations in legacy instrumentation. Its square, hermetically sealed CPGA68 package provides a mechanically distinct option for systems that already use PGA sockets. Designers should not infer modern replacement availability from the family similarity, because the supplied cross-reference data does not establish a verified five-part drop-in set or complete timing equivalence.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADSP-1012AJG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADSP-1012ASG/883B |
|---|---|---|
| Package | PGA-68, hermetically sealed | PGA-68 family candidate; exact package must be confirmed |
| Brand | Analog Devices | Analog Devices |
| Function | 12-bit DSP multiplier | ADSP-1012 family multiplier; detailed parameter comparison unavailable |
주요 차별점
- Exact commercial-grade ordering identity (vs ADSP-1012ASG/883B)
- Verified core arithmetic identity (vs ADSP-1012ASG/883B)
- Hermetically sealed ceramic PGA construction (vs ADSP-1012ASG/883B)
설계 노트
Use the manufacturer’s CPGA68 footprint and connector drawing rather than estimating hole locations from the reported 27.89 mm square package dimension. The verified records identify a hermetically sealed 68-terminal PGA, but they do not provide row spacing, pin diameter, or keying details. Confirm those mechanical dimensions before releasing a PCB layout, especially when replacing an existing board.
Budget the supply rail for at least the verified 60 mA maximum supply-current figure, then add margin for external logic and board-level requirements. The nominal supply is 5 V, but the supplied data does not state voltage tolerance, quiescent current, or sequencing. Confirm those parameters in the Analog Devices datasheet and provide local decoupling according to its recommended layout.
Do not finalize bus timing, control polarity, or output-drive assumptions from marketplace descriptions. The verified data confirms a 24-bit output bus but omits propagation delay, setup and hold times, clock requirements, and enable behavior. Compare those timing parameters against the target system and the authoritative datasheet, particularly when the multiplier feeds a communications or test-measurement pipeline.
ADSP-1012ASG/883B is related to the ADSP-1012 family, but family similarity alone does not prove exact replacement compatibility. The supplied cross-reference excerpt explicitly warns that functional characteristics may be similar while main parameters differ. Review ordering information, grade, pinout, timing, and environmental requirements before substituting it in a qualified or production system.
규정 준수 정보
The supplied verified records identify commercial temperature grade but do not provide RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statements.
