ADSP-2104LKP-55 - 16-Bit 13 Mips DSP | Analog Devices
부품 번호: ADSP-2104LKP-55 ✓ 활성ADSP-2104LKP-55 개요
A digital signal processor is a specialized microprocessor architecture optimized to execute repetitive mathematical operations efficiently. Unlike a general-purpose processor, the ADSP-2104LKP-55 provides independent computation units and a three-bus Harvard-style organization so instruction fetches and data transfers can occur concurrently. This architecture places it within the broader hierarchy of fixed-point DSP, digital signal processor, embedded processor, and semiconductor categories.
The processor’s principal characteristics include 16-bit fixed-point arithmetic, a 13 Mips rate, 3.3 V supply operation, and two serial ports. Its computation section includes an arithmetic logic unit, multiplier-accumulator, and shifter. Single-cycle instruction execution is identified as a core feature of the ADSP-2104 family, supporting predictable performance in filtering, signal transformation, and control-loop workloads.
The enhanced Harvard architecture separates the instruction path from two data paths, allowing the processor to coordinate instruction access with multiple data-transfer operations. Its on-chip memory reduces the need for frequent external-memory transfers during real-time DSP workloads. The 68-terminal plastic leaded chip carrier package also provides dedicated external connectivity for serial interfaces, memory, control signals, and power distribution.
Typical applications include audio and communications signal processing, industrial control, instrumentation, speech processing, and embedded DSP modules where deterministic fixed-point computation is required. The two serial ports are particularly useful for connecting the processor to converters, transceivers, or other serial peripherals. The 13 Mips rate provides a clear workload limit for choosing sample rates, filter orders, and algorithmic complexity.
When designing around this device, verify the complete pin assignment and voltage requirements against the manufacturer datasheet before laying out the board. The plastic leaded chip carrier package is not a compact surface-mount solution and requires adequate lead spacing, soldering-process compatibility, and mechanical clearance. Legacy software toolchains and peripheral-interface requirements should also be validated before committing to a new design.
This product page combines the documented processor identity, package information, source listings, and practical sourcing guidance with a technical comparison framework. It also identifies the limitation of drop-in substitutions: no independently confirmed pin-compatible replacement was established for this exact 68-terminal device, so unsupported equivalents are not presented as drop-in alternatives.
드롭인 대체품: ADSP-2104LKP-55 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ADSP-2104LKPZ-55
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADSP-2104LKPZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADSP-2103LKP-55
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADSP-2102LKP-55
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADSP-2101LKP-55
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADSP-2104LKP-55 사양
| Processor Type | 16-bit fixed-point DSP microprocessor |
| Instruction Set | 16-bit fixed-point |
| Execution Rate | 13 Mips |
| Clock Rate | 13.824 MHz |
| 공급 전압 | 3.3 V |
| Serial Port Count | 2 ports |
| Architecture | Enhanced Harvard architecture with three-bus performance |
| Instruction Bus Count | 1 bus |
| Data Bus Count | 2 independent buses |
| On-Chip Memory | Present |
| Computation Units | ALU, multiplier-accumulator, and shifter |
| Instruction Execution | Single-cycle instruction execution |
| 패키지 | 68-terminal plastic leaded chip carrier |
| Package Code | QCCJ |
| Terminal Count | 68 terminals |
| Package Shape | Rectangular |
| Lead Form | J-bend |
| Temperature Grade | Commercial |
| Datasheet Document Length | 36 pages |
| Datasheet File Size | 333 Kbytes |
ADSP-2104LKP-55 rectangular 핀 구성 가이드
ADSP-2104LKP-55(rectangular 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADSP-2104LKP-55.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADSP-2104LKP-55 적합 용도: 6 애플리케이션s: Digital Audio Filtering, Communications Signal Processing, Industrial Measurement and Control, Speech and Instrumentation Signal Chains, Motion and Embedded Control, Legacy Embedded DSP Modules.
Digital Audio Filtering
The ADSP-2104LKP-55 suits digital audio filtering because its 16-bit fixed-point architecture, 13 Mips execution rate, and independent multiplier-accumulator support efficient multiply-accumulate operations commonly used in filters and equalizers. The two serial ports can connect the processor to serial audio converters, reducing the need for a separate interface controller. Designers should budget the 13.824 MHz clock against the required sample rate, filter order, coefficient storage, and data-transfer overhead, then verify converter timing against the serial-interface documentation.
추천
Communications Signal Processing
The ADSP-2104LKP-55 can support communications signal-processing functions that combine sampling, filtering, modulation-related arithmetic, and serial data transfer. Its enhanced Harvard architecture uses one instruction bus and two data buses, while the separate ALU, multiplier-accumulator, and shifter allow operations commonly concentrated in DSP algorithms to proceed efficiently. Two serial ports provide connections to converters or transceivers. System-level timing must account for the 13.824 MHz clock and all interrupt, memory, and peripheral-access overhead.
추천
Industrial Measurement and Control
The ADSP-2104LKP-55 is appropriate for industrial measurement and control systems that must condition sampled signals and execute fixed-point control calculations deterministically. Its 13 Mips rate provides a defined processing budget, while on-chip memory can reduce external-memory traffic during repetitive operations. The two serial ports are useful for connected converters or service interfaces. Engineering validation should include worst-case execution time, thermal margins, bus contention, and the assembly implications of the 68-terminal plastic leaded chip carrier package.
추천
Speech and Instrumentation Signal Chains
The ADSP-2104LKP-55 can implement speech-processing, waveform-analysis, and instrumentation algorithms that depend on repeatable multiply-accumulate and shift operations. Its 16-bit fixed-point format aligns with many embedded signal-processing workflows, and the enhanced Harvard organization separates instruction access from two data buses to support concurrent transfers. Designers should select coefficients and scaling carefully to preserve dynamic range, while using the serial interfaces for sampled input or external instrumentation data.
추천
Motion and Embedded Control
The ADSP-2104LKP-55 can serve embedded motion-control and condition-monitoring functions where sampled sensor data must be filtered before control decisions are generated. Its independent computation units support parallelizable fixed-point operations, while the 13.824 MHz clock sets the upper bound for sampling and loop timing. The two serial ports can accommodate sensor or communications links. Real-time validation should include interrupt latency, worst-case algorithm duration, output update rate, and safe behavior when external serial devices disconnect.
추천
Legacy Embedded DSP Modules
The ADSP-2104LKP-55 fits legacy embedded DSP modules that retain the ADSP-2104 software ecosystem, 16-bit fixed-point arithmetic, and existing serial-interface architecture. Such continuity can be valuable when maintaining proven filter, control, or communications code without redesigning the processor family and toolchain. The main engineering constraint is physical rather than functional: the 68-terminal plastic leaded carrier occupies more board area than a modern surface-mount processor and must be checked against existing assembly fixtures and thermal constraints.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADSP-2104LKP-55 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Processor Type | 16-bit fixed-point DSP microprocessor |
| Execution Rate | 13 Mips |
| Clock Rate | 13.824 MHz |
| Supply Voltage | 3.3 V |
| Serial Ports | 2 ports |
| Architecture | Enhanced Harvard three-bus architecture |
| Computation Units | ALU, multiplier-accumulator, and shifter |
| Package | 68-terminal plastic leaded chip carrier (QCCJ) |
| Brand | Analog Devices |
| Temperature Grade | Commercial |
주요 차별점
- Dedicated fixed-point DSP computation resources (vs General-purpose microprocessors)
- Concurrent three-bus organization (vs General-purpose microprocessors with a more unified execution model)
- Integrated serial connectivity (vs DSP processors requiring separate serial interface resources)
설계 노트
Treat the ADSP-2104LKP-55 as a 68-terminal plastic leaded chip carrier rather than a compact surface-mount device. Before layout release, assign every terminal from the manufacturer pin-description table, reserve the 3.3 V supply and ground pins, and confirm the required external memory and support components. Maintain adequate spacing for the J-bend leads and verify that the chosen assembly process, board outline, and component-clearance rules accommodate the package.
Do not treat a related ADSP-2104 orderable code as a drop-in replacement without checking the package, pinout, electrical limits, memory organization, serial-interface behavior, and software-tool requirements. The available information identifies ADSP-2104LKP-55-R2 as a related family listing, but the suffix alone does not establish interchangeability. Create a migration checklist and verify timing, initialization, interrupt vectors, and peripheral registers on the final hardware.
Route clock and reset-related connections using the layout and decoupling guidance in the manufacturer datasheet. Keep power distribution robust and place required bypass capacitors close to their associated supply terminals within the constraints of the 68-terminal footprint. Separate high-current or noisy switching circuitry from sensitive analog and signal-processing paths where the board architecture permits, and review return-current continuity when assigning grounds across the legacy leaded package.
The processor operates from 3.3 V, but system power planning must include the exact supply-current limits from the manufacturer datasheet and any external memory or peripheral loads. Check the regulator’s tolerance, transient response, startup sequencing, and total board current rather than designing from processor clock speed alone. Validate brownout behavior and supply sequencing in hardware because incorrect power order or out-of-range voltage can cause unreliable processor or memory operation.
규정 준수 정보
The indexed product information identifies a commercial temperature grade but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The processor is not an automotive-qualified AEC-Q100 variant based on the available ordering information.