Analog Devices

ADV7401KSTZ-140 - 10-Bit Video Decoder | Analog Devices

부품 번호: ADV7401KSTZ-140 ✓ 활성
3.3 V Vdss PAL, NTSC, SECAM Rds(on) 100-lead LQFP, 14 mm x 14 mm Package
MOQ: 1 |

ADV7401KSTZ-140 개요

The Analog Devices ADV7401KSTZ-140 is a 10-bit, single-chip multiformat SDTV/HDTV video decoder and RGB graphics digitizer with 100-lead LQFP packaging. It converts PAL, NTSC, and SECAM composite or S-video signals into the digital ITU-R BT.656 format, while the 1.8 V digital and 3.3 V analog supply arrangement supports integration with contemporary video processing logic.

A video decoder is an interface IC that converts legacy analog television waveforms into digital pixels suitable for capture, scaling, processing, encoding, or display. Within the broader semiconductor hierarchy, the ADV7401 belongs to video processing ICs, interface ICs, and multimedia signal-processing semiconductors. Its integrated analog front end and digital output reduce the need for separate decoders when equipment must accept multiple regional television standards.

The ADV7401 supports 10-bit digitization for PAL, NTSC, and SECAM, with composite and S-video inputs identified in the manufacturer product information. Serial digital output follows the ITU-R BT.656 interface format. The device also incorporates on-screen display and teletext support, as identified for the ADV7401KSTZ-140, along with RGB graphics digitization. These features make it applicable to broadcast equipment, video capture systems, industrial monitoring panels, and legacy-source conversion equipment.

The -140 orderable variant uses a 100-lead, 14 mm by 14 mm low-profile flat package and is specified for an industrial temperature range of 0°C to 70°C. The 100-pin interface exposes the analog video inputs, digital processing connections, control signals, synchronization outputs, and supply rails. That extensive mixed-signal pinout requires a carefully partitioned PCB with short analog paths, controlled return currents, and separate routing for digital output and clock signals.

Typical designs place the ADV7401 between an analog video connector and an FPGA, DSP, image processor, or digital video encoder. In a PAL/NTSC capture system, the decoder digitizes the incoming composite signal and presents synchronized 10-bit pixels over ITU-R BT.656 for downstream processing. In broadcast or professional monitoring equipment, its multistandard decoding, OSD, and teletext capabilities reduce the number of separate video subsystem blocks while preserving a common digital processing interface.

The primary design consideration is mixed-signal implementation. Route composite and S-video inputs away from high-speed digital clocks, use an uninterrupted ground plane, place bypass capacitors at the supply pins, and follow the pin-description table in the manufacturer datasheet when assigning connector and processor connections. Confirm supported resolution, synchronization mode, and output timing against the system video standard before releasing the PCB layout.

This product page consolidates the multiformat decoding capability, package details, practical interface guidance, qualified drop-in comparisons, and sourcing information needed to evaluate the ADV7401KSTZ-140 before integrating it into an SDTV, HDTV, broadcast, capture, or industrial video design.

드롭인 대체품: ADV7401KSTZ-140 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADV7401KSTZ-140 (동일 폼 팩터 및 풋프린트) — 차이점: Package.

Analog Devices
Package: 100-LQFP, 14 x 14 mm
비교 대상: ADV7401KSTZ-140 →

ADV7401KSTZ-100

✅ 드롭인 ⚠️ 사양 미검증
📦 100-lead LQFP (14 mm x 14 mm)
Same ADV7401 family and 100-lead package; -100 grade suffix replaces the target -140 suffix, a 40-code ordering-grade difference requiring feature and temperature verification

📋 참조 대체품 (카탈로그에 없음)

ADV7401KSTZ-110

✅ 드롭인 ⚠️ 사양 미검증
📦 100-lead LQFP (14 mm x 14 mm)
Same ADV7401 family and 100-lead package; -110 grade suffix replaces the target -140 suffix, a 30-code ordering-grade difference requiring feature and temperature verification

📋 참조 대체품 (카탈로그에 없음)

ADV7401KSTZ-120

✅ 드롭인 ⚠️ 사양 미검증
📦 100-lead LQFP (14 mm x 14 mm)
Same ADV7401 family and 100-lead package; -120 grade suffix replaces the target -140 suffix, a 20-code ordering-grade difference requiring feature and temperature verification

📋 참조 대체품 (카탈로그에 없음)

ADV7401KSTZ

✅ 드롭인 ⚠️ 사양 미검증
📦 100-lead LQFP (14 mm x 14 mm)
Same ADV7401 family and 100-lead package; unsuffixed grade is used instead of the -140 grade, creating one ordering-grade difference

📋 참조 대체품 (카탈로그에 없음)

ADV7403KSTZ-140

✅ 드롭인
Analog Devices
📦 100-lead LQFP (14 mm x 14 mm)
12-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer · PAL, NTSC, and SECAM composite or S-video · Serial ITU-R BT.656 · 12-bit · 4 · 140 MHz · 12 · Not required for multisource connection

가격 문의

데이터시트 보기 →

ADV7400AKSTZ-80

✅ 드롭인
Analog Devices
📦 100-lead LQFP (14 mm x 14 mm)
10-bit multiformat SDTV/HDTV video decoder and RGB graphics digitizer · 10-bit · Multiformat SDTV/HDTV · RGB graphics digitization · 1.8 V · 3.3 V · -25°C · +70°C

가격 문의

데이터시트 보기 →

ADV7401KSTZ-140 사양

Product Type 10-bit multiformat SDTV/HDTV video decoder and RGB graphics digitizer
Supported Analog Standards PAL, NTSC, SECAM
Supported Analog Inputs Composite and S-video
Digital Output Format Serial ITU-R BT.656
Digitization Resolution 10 bit
Analog Supply Voltage 3.3 V
Digital Supply Voltage 1.8 V
Graphics Processing RGB graphics digitization
On-Screen Display Support Supported
Teletext Support Supported
패키지 100-lead LQFP, 14 mm x 14 mm
동작 온도 범위 0°C to 70°C
실장 유형 Surface mount

ADV7401KSTZ-140 100-lead lqfp, 14 mm x 14 mm 핀 구성 가이드

ADV7401KSTZ-140(100-lead lqfp, 14 mm x 14 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ADV7401KSTZ-140의 100-lead lqfp, 14 mm x 14 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADV7401KSTZ-140.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADV7401KSTZ-140 적합 용도: 6 애플리케이션s: Multiformat Broadcast Video Capture, Industrial Video Inspection Systems, Legacy AV Signal Conversion, Security and CCTV Video Interface, Video Test and Measurement Equipment, Professional Video Monitoring and OSD.

📺

Multiformat Broadcast Video Capture

The ADV7401KSTZ-140 fits broadcast capture equipment that must accept PAL, NTSC, or SECAM material through composite or S-video connections. Its 10-bit decoder converts the analog source into ITU-R BT.656 digital pixels for an FPGA, DSP, image processor, or encoder, reducing the need for separate format-specific decoders. Place the device near the input connector, route the analog signals away from processor clocks, and use the 1.8 V digital and 3.3 V analog rails with local bypass capacitors. The principal benefit is one integrated decoder path for multiple regional video standards, while the designer must still confirm supported resolution, timing, and chroma behavior for each format.

🏭

Industrial Video Inspection Systems

The ADV7401KSTZ-140 is suitable for industrial inspection and monitoring equipment that receives legacy composite or S-video camera signals and needs a digital processing path. Its 0°C to 70°C industrial temperature range, multiformat decoding, OSD capability, and 10-bit digitization support systems that combine captured imagery with overlays or graphics. The decoder can feed a processor that performs edge detection, measurement, or machine-vision analysis. Keep analog traces short, preserve a continuous ground reference, and isolate high-energy switching nodes from the input section. The 100-lead LQFP footprint provides the required mixed-signal connectivity but requires deliberate partition of analog, digital, clock, and supply routes.

🔧

Legacy AV Signal Conversion

The ADV7401KSTZ-140 can form the input stage of a legacy AV converter that accepts PAL, NTSC, or SECAM equipment and exports standardized digital video. Its composite and S-video inputs support equipment ranging from professional source converters to menu-generation and service systems, while ITU-R BT.656 output connects cleanly to digital processing logic. OSD and teletext support add value in professional monitoring and broadcast-adjacent products. Because the chip combines analog decoding and digital signaling, the converter PCB should separate video connectors, grounding, and switching supplies from high-speed digital routing. Use the family application circuit as the basis for impedance, termination, filtering, and supply-decoupling implementation.

🎥

Security and CCTV Video Interface

The ADV7401KSTZ-140 is applicable to legacy security and CCTV equipment that receives analog camera video and needs to convert it for digital recording or transmission. The PAL/NTSC/SECAM compatibility covers international analog camera standards, while the 10-bit ITU-R BT.656 output provides a deterministic digital interface for an image processor or encoder. OSD support can add camera identification or status graphics without a separate overlay generator. The design must maintain low-noise grounding around the analog section, use filtering recommended by Analog Devices, and avoid routing composite signals beneath switching regulators and high-speed memories. Confirm the camera format, synchronization scheme, chroma standard, and environmental temperature before selecting the device.

🖥️

Video Test and Measurement Equipment

The ADV7401KSTZ-140 supports multiformat video test equipment where PAL, NTSC, and SECAM composite or S-video sources must be digitized for measurement. The 10-bit decoder and ITU-R BT.656 output allow the captured image to be analyzed by an FPGA, DSP, or graphics controller, while OSD and teletext functions assist in identifying channels and displaying menus. Design the input path with short connectors and controlled grounding to preserve measurement quality, and provide clean 1.8 V and 3.3 V supplies with local decoupling. Instrument-grade results also depend on clock jitter, analog filtering, synchronization accuracy, and external calibration, which should be evaluated together with the decoder rather than inferred from its nominal bit depth.

🖥️

Professional Video Monitoring and OSD

The ADV7401KSTZ-140 fits professional monitoring designs that decode multiple analog standards and need overlays, graphics, or teletext-related functions. Its support for RGB graphics digitization, on-screen display, and teletext allows a single decoder-related block to serve both picture acquisition and information display. The resulting ITU-R BT.656 stream can be routed to a processor or video encoder for display. Because the 100-lead LQFP contains both analog and digital interfaces, layout quality strongly affects cursor visibility and picture stability. Keep the analog video section away from switching nodes, maintain short return paths, and use controlled clock routing. Firmware must also be adapted to the selected synchronization, OSD, and teletext configuration.

What is the ADV7401KSTZ-140?
The ADV7401KSTZ-140 is a 10-bit, single-chip multiformat SDTV/HDTV video decoder and RGB graphics digitizer from Analog Devices. It accepts PAL, NTSC, and SECAM composite or S-video signals and converts them into the digital ITU-R BT.656 format. The device is housed in a 100-lead LQFP measuring 14 mm by 14 mm and operates from a 1.8 V digital supply and a 3.3 V analog supply.
Which video standards does ADV7401KSTZ-140 support?
The ADV7401KSTZ-140 supports PAL, NTSC, and SECAM through its composite and S-video inputs. According to the Analog Devices ADV7401 product page, these standards are converted into digital ITU-R BT.656 video data. The 10-bit digitization path is suitable for multistandard capture and processing systems, although the supported resolution and synchronization mode for each standard must be confirmed in the manufacturer datasheet.
What are the key specifications of ADV7401KSTZ-140 that engineers should know?
The ADV7401KSTZ-140 combines 10-bit video digitization, PAL/NTSC/SECAM decoding, composite and S-video inputs, and serial ITU-R BT.656 output in one 100-lead LQFP. It operates from 1.8 V digital and 3.3 V analog supplies, supports RGB graphics digitization, OSD, and teletext, and is specified for 0°C to 70°C. These features make it suitable for legacy-video capture, broadcast, and monitoring equipment.
Where to download the ADV7401KSTZ-140 datasheet PDF?
The official ADV7401KSTZ-140 technical documentation is available through the Analog Devices ADV7401 product page at https://www.analog.com/en/products/adv7401.html. Select the datasheet or data-sheet resource associated with the ADV7401 family, then confirm that the document includes the -140 orderable variant, the 100-lead pin description, electrical characteristics, and recommended application circuitry.
Where can I find the ADV7401KSTZ-140 pinout?
The ADV7401KSTZ-140 pin assignment is documented in the Analog Devices ADV7401 family datasheet, which should be accessed from the official ADV7401 product page. The device uses a 100-lead LQFP package with separate analog-video, digital-video, synchronization, control, clock, and supply connections. Use the datasheet pin-description table for PCB routing and do not infer unused connections solely from the package drawing.
What power supplies are required for ADV7401KSTZ-140?
The ADV7401KSTZ-140 requires a 1.8 V digital supply and a 3.3 V analog supply. These rails serve distinct circuit blocks within the decoder, so both must be designed with local bypass capacitance and adequate return-current paths. The Analog Devices product information identifies the two supply levels, while the family datasheet should be used for sequencing, decoupling, and absolute maximum rating details.
Can ADV7401KSTZ-140 decode S-video signals?
Yes, the ADV7401KSTZ-140 accepts S-video as well as composite inputs and supports PAL, NTSC, and SECAM decoding. Its output is converted into serial ITU-R BT.656 digital video for downstream image processing. The S-video connector should be routed with short, symmetrical analog traces, and the manufacturer’s recommended input network and grounding arrangement should be followed to preserve signal quality.
Where to buy ADV7401KSTZ-140 online?
Use the Request a Quote form on this page to request the ADV7401KSTZ-140, current lead time, and available quantity. The part is an Analog Devices 100-lead LQFP device, so include the exact suffix ADV7401KSTZ-140 when requesting a quotation. This avoids ambiguity with other ADV7401 grade, package, or ordering-code variants that may not have identical procurement requirements.
What is the price of ADV7401KSTZ-140?
Current commercial terms for the ADV7401KSTZ-140 are handled through the Request a Quote form on this page. Submit the exact MPN and required quantity to obtain current pricing, stock confirmation, and lead-time information. Because the device includes a specific -140 ordering suffix, quote requests should not be generalized to the complete ADV7401 family.
What is the lead time for ADV7401KSTZ-140?
The current lead time and minimum order quantity for ADV7401KSTZ-140 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, inventory, and the manufacturer’s production planning. Provide the target quantity and required delivery date in the request so the commercial response reflects the actual production plan.
Is ADV7401KSTZ-140 in stock?
Request current stock status for ADV7401KSTZ-140 through the Request a Quote form on this page. The quote team can confirm available inventory, scheduled supply, and the earliest allocation for the exact -140 ordering code. Stock for the broader ADV7401 family should not be treated as confirmation of this specific grade and package.
What is the best drop-in replacement for ADV7401KSTZ-140?
The ADV7401KSTZ-140 is closest to the ADV7403KSTZ-140 in ordering family and 100-lead package, but the feature-level differences must be checked before substitution. The ADV7400AKSTZ-80 is another family-level candidate, although its -80 grade differs from the target -140 grade. No cross-brand component has been established as a true pin-to-pin replacement, so use the family datasheets to confirm every analog, digital, control, and supply connection.
What can replace ADV7401KSTZ-140?
ADV7401 family devices such as ADV7403KSTZ-140 and ADV7400AKSTZ-80 are the relevant starting points for a replacement review. Both use the same 100-lead LQFP family arrangement, while the ordering suffixes identify different device grades or family features. Before replacing the ADV7401KSTZ-140, verify pin names, analog input bandwidth, supported resolutions, clocking, power rails, OSD, teletext, and synchronization behavior against the target design.
Is ADV7401KSTZ-140 the same as ADV7403KSTZ-140?
No, ADV7401KSTZ-140 and ADV7403KSTZ-140 are related Analog Devices video-decoder products, not identical functions. Both appear in the 100-lead LQFP family and share a comparable device class, but the ADV7403 family may add or change features that affect firmware, control, and signal processing. Treat the change as a redesign until the family comparison tables and pin descriptions have been reviewed.
Is ADV7401KSTZ-140 suitable for industrial video capture?
The ADV7401KSTZ-140 is suitable for an industrial-temperature video-capture design operating between 0°C and 70°C. Its PAL, NTSC, and SECAM decoding, composite or S-video input, 10-bit digitization, and ITU-R BT.656 output suit equipment that must ingest legacy analog video into an FPGA, DSP, image processor, or encoder. Validate signal integrity, timing, and enclosure temperature rise before production release.
ADV7401KSTZ-140 vs ADV7400AKSTZ-80: which is better for multiformat capture?
The ADV7401KSTZ-140 is the stronger starting choice for a design requiring the documented PAL, NTSC, SECAM, composite, S-video, OSD, teletext, and RGB digitization feature set. The ADV7400AKSTZ-80 belongs to an earlier or different ADV family and ordering grade. It should be selected only after confirming that its decoder formats, output timing, control registers, and analog performance satisfy the intended capture system.
When should I choose ADV7401KSTZ-140 instead of ADV7403KSTZ-140?
Choose ADV7401KSTZ-140 when the system specification calls specifically for the ADV7401 feature set: multiformat PAL/NTSC/SECAM decoding, composite and S-video input, 10-bit digitization, RGB graphics capture, OSD, teletext, and ITU-R BT.656 output. Choose ADV7403KSTZ-140 only when its additional or changed video features are required and its datasheet confirms equivalent mechanical and electrical integration.
What is the best Analog Devices equivalent for ADV7401KSTZ-140?
No cross-brand equivalent has been established for the ADV7401KSTZ-140, and a functional video decoder is not automatically a drop-in replacement. The closest Analog Devices candidates for engineering review are ADV7403KSTZ-140 and ADV7400AKSTZ-80 because they use the same 100-lead LQFP family arrangement. A valid substitution requires exact pin, feature, timing, supply, and analog-performance equivalence rather than package similarity alone.

엔지니어링 참조 데이터: ADV7401KSTZ-140 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ADV7401KSTZ-140 when the product must decode PAL, NTSC, and SECAM composite or S-video with a 10-bit ITU-R BT.656 output and requires the documented OSD, teletext, and RGB graphics digitization functions. Its 100-lead LQFP package, 1.8 V digital rail, 3.3 V analog rail, and 0°C to 70°C specification fit industrial multiformat capture systems. ADV7401KSTZ-100, -110, -120, and the unsuffixed device are appropriate only after their ordering-grade features and temperature limits are confirmed. Consider ADV7403KSTZ-140 when its changed or additional video functions are needed, and ADV7400AKSTZ-80 when its supported formats, timing, and control interface meet the design. No cross-brand replacement should be used solely because it is described as a video decoder; verify every pin, supply, clock, synchronization, and analog requirement before substitution.

대체품과의 비교

파라미터 이 제품 ADV7401KSTZ-100 ADV7401KSTZ-110 ADV7401KSTZ-120 ADV7401KSTZ ADV7403KSTZ-140 ADV7400AKSTZ-80
Package 100-lead LQFP (14 mm x 14 mm) 100-lead LQFP (14 mm x 14 mm) 100-lead LQFP (14 mm x 14 mm) 100-lead LQFP (14 mm x 14 mm) 100-lead LQFP (14 mm x 14 mm) 100-lead LQFP (14 mm x 14 mm) 100-lead LQFP (14 mm x 14 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Device Family ADV7401 ADV7401 ADV7401 ADV7401 ADV7401 ADV7403 ADV7400
Ordering Suffix -140 -100 -110 -120 No grade suffix -140 -80

주요 차별점

  • Integrated multistandard decoding with OSD and teletext (vs ADV7403KSTZ-140)
  • Target -140 grade with documented industrial temperature range (vs ADV7400AKSTZ-80)
  • Defined 1.8 V digital and 3.3 V analog supply arrangement (vs ADV7401KSTZ-120)

설계 노트

Separate the analog video section from digital processing and clock routing. Keep composite and S-video traces short, avoid running them beneath switching nodes or high-speed buses, and provide a continuous ground reference beneath the decoder. The 3.3 V analog supply and 1.8 V digital supply should each be decoupled locally at their associated pins, with return-current paths arranged to minimize coupling into the video input.

Use the manufacturer’s recommended application circuit as the basis for connector protection, input filtering, supply bypassing, and digital output routing. Place input protection and filtering components close to the video connector, and place bypass capacitors close to the corresponding ADV7401KSTZ-140 supply pins. Maintain the package’s exposed thermal and ground-connection requirements and follow the land pattern in the package drawing before releasing artwork.

Treat the 10-bit ITU-R BT.656 output as a synchronous digital interface whose signal integrity depends on clock and data timing. Route clock and data using a topology consistent with the destination device, keep the clock away from analog inputs, and verify setup and hold requirements with the actual receiver. External resistors or capacitors should be added only where required by the manufacturer’s reference design or validated timing analysis.

Do not select a decoder solely by its 10-bit nominal resolution. Confirm PAL, NTSC, and SECAM support, chroma behavior, synchronization mode, supported picture format, OSD behavior, and clock configuration for the actual signal source. Also verify that the selected ADV7401 grade matches the required temperature range. A suffix substitution can alter ordering-grade behavior even when the package and primary decoder class remain the same.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product is specified for industrial temperature operation. A distributor listing references RoHS, but a definitive compliance declaration was not established, so all compliance states remain unknown.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ADV7401KSTZ-140 ADV7401KSTZ-140 datasheet ADV7401KSTZ-140 datasheet pdf ADV7401KSTZ-140 pinout ADV7401KSTZ-140 equivalent ADV7401KSTZ-140 replacement ADV7401KSTZ-140 cross reference ADV7401KSTZ-140 vs ADV7403KSTZ-140 ADV7401KSTZ-140 vs ADV7400AKSTZ-80 Analog Devices ADV7401KSTZ-140 ADV7401 100 LQFP video decoder ADV7401 PAL NTSC SECAM decoder ADV7401 ITU-R BT.656 output ADV7401 industrial video capture ADV7401KSTZ-140 price

관련 부품 & 용어

Analog Devices ADV7401KSTZ-140 ADV7401KSTZ-100 ADV7401KSTZ-110 ADV7401KSTZ-120 ADV7401KSTZ ADV7403KSTZ-140 ADV7400AKSTZ-80 video decoder SDTV video decoder HDTV video decoder RGB graphics digitizer multiformat video processor interface IC video processing IC semiconductor PAL NTSC SECAM composite video S-video ITU-R BT.656 10-bit digitization 1.8 V digital supply 3.3 V analog supply 100-lead LQFP LQFP package family surface-mount package on-screen display teletext industrial temperature range
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기