AK7835S5 - Mono Class D Audio Amplifier | AKM
부품 번호: AK7835S5 ✓ 활성AK7835S5 개요
An audio amplifier IC is part of the broader signal-chain hierarchy that includes amplifiers, analog integrated circuits, and semiconductors. In a typical audio path, an input source produces a low-level voltage signal that must be strengthened before driving a speaker or another load. The AK7835S5 belongs to the Class D portion of that hierarchy, where an amplifier uses a switching output stage rather than a conventional linear output stage. The available product information identifies the device as mono, meaning it processes one audio channel.
The AK7835S5 is identified as an integrated circuit from Asahi Kasei Microdevices, also known as AKM Semiconductor. Its principal documented characteristics are mono Class D operation, a 10 MSOP package, and tape-and-reel production packaging. A technical listing also associates the device with an I2C bus port filter, electrostatic-discharge protection, and electromagnetic-compatibility countermeasures. Because interface behavior and protection ratings can vary by operating condition, engineers should confirm those functions against the manufacturer datasheet before finalizing an I2C-connected design.
Class D topology makes amplifier efficiency and thermal performance central design considerations. Switching amplification reduces the amount of power dissipated in the output stage compared with many linear approaches, but the output still requires careful filtering and layout control. Trace geometry, return paths, output-filter components, and the grounding strategy can materially affect noise, channel separation, and electromagnetic emissions. The compact MSOP footprint helps reduce board area but leaves less space for thermal spreading than a larger package.
Typical uses for the AK7835S5 include portable speakers, compact consumer-audio products, sound modules, and embedded audio subsystems where a single amplified channel is sufficient. In these systems, the amplifier can sit between a digital-audio source or DAC and a speaker driver, with local decoupling and output filtering placed close to the device. An I2C-controlled implementation may be attractive for systems that need register-based configuration or status reporting, subject to confirmation of the exact command set and logic levels.
PCB implementation should preserve the short current path from the power supply and output network to the amplifier. Place input and output capacitors in accordance with the manufacturer reference layout, keep high-current output loops compact, and route sensitive input traces away from switching nodes. Decoupling should provide local charge for fast output transitions, while analog and power grounds should meet according to the recommended topology rather than through improvised shared paths.
This product page combines the documented AK7835S5 identity, package information, sourcing context, and practical Class D layout guidance. It also distinguishes confirmed catalog attributes from electrical details that still require direct confirmation from the manufacturer datasheet, helping engineers qualify the part for audio, industrial, and embedded system designs.
드롭인 대체품: AK7835S5 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청AK7835S5 최대 정격 & 전기적 특성
| Product Type | Mono Class D audio amplifier IC |
| Manufacturer | Asahi Kasei Microdevices/AKM |
| Amplifier Channel Count | 1 channel |
| Amplifier Class | Class D |
| Package Type | 10 MSOP |
| 핀 수 | 10 pins |
| 실장 유형 | Surface mount |
| Shipping Package | Tape & Reel (TR) |
| Production Status | Fully developed and mass-produced |
| Interface Function | I2C bus port filter |
| Electrostatic Discharge Protection | Supported |
| Electromagnetic Compatibility Countermeasures | Supported |
AK7835S5 tape & reel (tr) 핀 구성 가이드
AK7835S5(tape & reel (tr) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AK7835S5.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AK7835S5 적합 용도: 6 애플리케이션s: Portable Speaker, Embedded Audio Module, Consumer Audio Accessory, Industrial Audible Alarm, Sound Sensor Interface Module, Robotics Status Audio.
Portable Speaker
The AK7835S5 fits a compact portable-speaker design that needs one amplified audio channel in a small board area. Its mono Class D classification is appropriate for a single driver or one side of a compact enclosure, while the 10 MSOP package preserves routing space around the amplifier. Place local supply decoupling and the Class D output filter near the device to control high-frequency switching behavior. Before selecting the part, confirm output power, supply voltage, quiescent current, speaker impedance, and thermal limits in the manufacturer datasheet against the battery and enclosure design.
Embedded Audio Module
The AK7835S5 can serve the audio-output stage of an embedded module driven by a microcontroller or digital audio source. Its documented I2C bus port filter and ESD-protection attributes may suit systems that need controlled communication and protection on the control path, subject to verification of the exact interface implementation. Place the amplifier close to the speaker connector and output-filter components, while keeping the audio input path away from switching-current loops. Confirm pin functions, logic levels, timing, and protection limits before integrating the control firmware.
Consumer Audio Accessory
A mono Class D amplifier architecture is useful in consumer accessories that produce one amplified audio channel, such as a compact sound box, alarm unit, or simplified media device. The AK7835S5's 10 MSOP package supports board miniaturization, and its mass-production status is consistent with a finished consumer-product supply chain. The implementation must still account for output-filter design, electromagnetic emissions, startup behavior, and heat dissipation. Confirm the output-power capability and continuous-load limits before connecting the speaker so the amplifier operates within both electrical and acoustic requirements.
Industrial Audible Alarm
The AK7835S5 can be evaluated for an industrial audible-alarm module that requires a compact mono audio amplifier rather than a high-channel-count codec. Its small package allows placement near the transducer, while Class D operation can support efficient conversion from a low-voltage supply. Use the manufacturer-recommended filter network and grounding arrangement to prevent switching energy from entering sensitive control circuitry. Industrial suitability must be assessed from the specified temperature range, EMC-related test results, and reliability documentation rather than inferred from the component category.
Sound Sensor Interface Module
AK7835S5 may be used in a sound-monitoring module when a sensor or detector produces a single analog audio channel that requires local amplification. The compact 10 MSOP footprint is useful where the amplifier must sit close to the transducer to minimize noise pickup and board-space constraints. Route the high-impedance input carefully, maintain a quiet ground reference for the signal path, and isolate it from the Class D output and supply-current loops. Verify the input impedance, gain configuration, bandwidth, and noise specifications before selecting the amplifier.
Robotics Status Audio
The AK7835S5 is a candidate for a compact robot or automation module that announces status tones through one speaker. Mono Class D output can simplify signal generation while reducing the space required for the power stage. The design should provide the amplifier with a stable low-noise supply, local decoupling, and the recommended LC output filter. Validate audible output level, distortion, thermal rise, and startup behavior across battery and bus-voltage conditions. Its 10 MSOP package also requires the assembly process to accommodate a fine-pitch leaded package.
엔지니어링 참조 데이터: AK7835S5 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 10 MSOP |
| Brand | Asahi Kasei Microdevices |
| Product Type | Mono Class D audio amplifier IC |
| Channel Count | 1 channel |
| Supply Packaging | Tape & Reel |
| Interface Function | I2C bus port filter |
| ESD Protection | Supported |
| EMC Countermeasures | Supported |
| Production Status | Fully developed and mass-produced |
| Mounting Type | Surface mount |
주요 차별점
- Single-channel Class D output in a compact package (vs No verified drop-in alternative)
- Documented interface and protection attributes (vs No verified drop-in alternative)
- Production-oriented supply packaging (vs No verified drop-in alternative)
설계 노트
Use the manufacturer reference layout as the basis for the 10 MSOP footprint and surrounding components. Keep the input and output capacitor connections short, place the amplifier's supply bypass capacitors immediately across its supply pins, and avoid routing sensitive input traces beneath or beside switching-current paths. The compact package leaves little room for improvised routing, so finalize component placement against the official land pattern before releasing the PCB artwork.
Class D output currents circulate rapidly through the power loop and output-filter network. Minimize the area enclosed by those connections, provide a low-impedance ground return, and separate the audio input reference from output switching nodes. Check the finished design for conducted and radiated emissions because trace length, filter-component placement, and ground geometry can affect compliance even when the amplifier itself operates correctly.
Calculate the required supply headroom and average input current from the confirmed output-power limit, supply voltage, efficiency, and quiescent current in the manufacturer datasheet. Do not select a speaker impedance or load current outside those limits. Verify startup behavior and the voltage ramp at the amplifier supply pins, since abrupt changes on a battery-powered rail can affect system reset behavior and audible transients.
Do not treat a catalog description as a complete electrical specification. In particular, confirm the 10 MSOP pin names, I2C interface details, input and output configurations, recommended filter values, thermal limits, and absolute maximum ratings in the manufacturer datasheet. A different AK-family amplifier or another mono Class D device may fit the package category without being pin-to-pin compatible, so PCB reuse requires a line-by-line pin and function review.
규정 준수 정보
The available product listings identify ESD-protection and EMC-countermeasure features but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm environmental and qualification status using AKM documentation.