AKM (Asahi Kasei Microdevices)

AK7835S5 - Mono Class D Audio Amplifier | AKM

MPN: AK7835S5 ✓ Active
10 MSOP Package Supported Memory
MOQ: 1 |

AK7835S5 Overview

Asahi Kasei Microdevices AK7835S5 is a mono Class D audio amplifier integrated circuit packaged in a 10 MSOP and supplied in tape-and-reel format. The component is classified in the linear amplifier family and is intended for compact audio signal amplification designs. AKM describes the AK7835S5 as a fully developed, mass-produced part. Its 10-pin MSOP construction supports space-constrained boards where a larger package would reduce usable routing area.

An audio amplifier IC is part of the broader signal-chain hierarchy that includes amplifiers, analog integrated circuits, and semiconductors. In a typical audio path, an input source produces a low-level voltage signal that must be strengthened before driving a speaker or another load. The AK7835S5 belongs to the Class D portion of that hierarchy, where an amplifier uses a switching output stage rather than a conventional linear output stage. The available product information identifies the device as mono, meaning it processes one audio channel.

The AK7835S5 is identified as an integrated circuit from Asahi Kasei Microdevices, also known as AKM Semiconductor. Its principal documented characteristics are mono Class D operation, a 10 MSOP package, and tape-and-reel production packaging. A technical listing also associates the device with an I2C bus port filter, electrostatic-discharge protection, and electromagnetic-compatibility countermeasures. Because interface behavior and protection ratings can vary by operating condition, engineers should confirm those functions against the manufacturer datasheet before finalizing an I2C-connected design.

Class D topology makes amplifier efficiency and thermal performance central design considerations. Switching amplification reduces the amount of power dissipated in the output stage compared with many linear approaches, but the output still requires careful filtering and layout control. Trace geometry, return paths, output-filter components, and the grounding strategy can materially affect noise, channel separation, and electromagnetic emissions. The compact MSOP footprint helps reduce board area but leaves less space for thermal spreading than a larger package.

Typical uses for the AK7835S5 include portable speakers, compact consumer-audio products, sound modules, and embedded audio subsystems where a single amplified channel is sufficient. In these systems, the amplifier can sit between a digital-audio source or DAC and a speaker driver, with local decoupling and output filtering placed close to the device. An I2C-controlled implementation may be attractive for systems that need register-based configuration or status reporting, subject to confirmation of the exact command set and logic levels.

PCB implementation should preserve the short current path from the power supply and output network to the amplifier. Place input and output capacitors in accordance with the manufacturer reference layout, keep high-current output loops compact, and route sensitive input traces away from switching nodes. Decoupling should provide local charge for fast output transitions, while analog and power grounds should meet according to the recommended topology rather than through improvised shared paths.

This product page combines the documented AK7835S5 identity, package information, sourcing context, and practical Class D layout guidance. It also distinguishes confirmed catalog attributes from electrical details that still require direct confirmation from the manufacturer datasheet, helping engineers qualify the part for audio, industrial, and embedded system designs.

Drop-in alternatives for AK7835S5 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

AK7835S5 Maximum Ratings & Electrical Characteristics

Product Type Mono Class D audio amplifier IC
Manufacturer Asahi Kasei Microdevices/AKM
Amplifier Channel Count 1 channel
Amplifier Class Class D
Package Type 10 MSOP
Pin Count 10 pins
Mounting Type Surface mount
Shipping Package Tape & Reel (TR)
Production Status Fully developed and mass-produced
Interface Function I2C bus port filter
Electrostatic Discharge Protection Supported
Electromagnetic Compatibility Countermeasures Supported

AK7835S5 tape & reel (tr) Pin Configuration Guide

Pin configuration for AK7835S5 (tape & reel (tr) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

tape & reel (tr) package pinout diagram for AK7835S5

No detailed pinout data available for AK7835S5.

Refer to the datasheet for full pin configuration.

Typical Applications

AK7835S5 is suitable for 6 applications: Portable Speaker, Embedded Audio Module, Consumer Audio Accessory, Industrial Audible Alarm, Sound Sensor Interface Module, Robotics Status Audio.

📱

Portable Speaker

The AK7835S5 fits a compact portable-speaker design that needs one amplified audio channel in a small board area. Its mono Class D classification is appropriate for a single driver or one side of a compact enclosure, while the 10 MSOP package preserves routing space around the amplifier. Place local supply decoupling and the Class D output filter near the device to control high-frequency switching behavior. Before selecting the part, confirm output power, supply voltage, quiescent current, speaker impedance, and thermal limits in the manufacturer datasheet against the battery and enclosure design.

🧩

Embedded Audio Module

The AK7835S5 can serve the audio-output stage of an embedded module driven by a microcontroller or digital audio source. Its documented I2C bus port filter and ESD-protection attributes may suit systems that need controlled communication and protection on the control path, subject to verification of the exact interface implementation. Place the amplifier close to the speaker connector and output-filter components, while keeping the audio input path away from switching-current loops. Confirm pin functions, logic levels, timing, and protection limits before integrating the control firmware.

🎧

Consumer Audio Accessory

A mono Class D amplifier architecture is useful in consumer accessories that produce one amplified audio channel, such as a compact sound box, alarm unit, or simplified media device. The AK7835S5's 10 MSOP package supports board miniaturization, and its mass-production status is consistent with a finished consumer-product supply chain. The implementation must still account for output-filter design, electromagnetic emissions, startup behavior, and heat dissipation. Confirm the output-power capability and continuous-load limits before connecting the speaker so the amplifier operates within both electrical and acoustic requirements.

🏭

Industrial Audible Alarm

The AK7835S5 can be evaluated for an industrial audible-alarm module that requires a compact mono audio amplifier rather than a high-channel-count codec. Its small package allows placement near the transducer, while Class D operation can support efficient conversion from a low-voltage supply. Use the manufacturer-recommended filter network and grounding arrangement to prevent switching energy from entering sensitive control circuitry. Industrial suitability must be assessed from the specified temperature range, EMC-related test results, and reliability documentation rather than inferred from the component category.

🔧

Sound Sensor Interface Module

AK7835S5 may be used in a sound-monitoring module when a sensor or detector produces a single analog audio channel that requires local amplification. The compact 10 MSOP footprint is useful where the amplifier must sit close to the transducer to minimize noise pickup and board-space constraints. Route the high-impedance input carefully, maintain a quiet ground reference for the signal path, and isolate it from the Class D output and supply-current loops. Verify the input impedance, gain configuration, bandwidth, and noise specifications before selecting the amplifier.

🤖

Robotics Status Audio

The AK7835S5 is a candidate for a compact robot or automation module that announces status tones through one speaker. Mono Class D output can simplify signal generation while reducing the space required for the power stage. The design should provide the amplifier with a stable low-noise supply, local decoupling, and the recommended LC output filter. Validate audible output level, distortion, thermal rise, and startup behavior across battery and bus-voltage conditions. Its 10 MSOP package also requires the assembly process to accommodate a fine-pitch leaded package.

What is the AK7835S5?
The AK7835S5 is a mono Class D audio amplifier integrated circuit from Asahi Kasei Microdevices/AKM in a 10 MSOP package. The product is classified as a linear audio amplifier and is supplied in tape-and-reel format. According to the AKM product listing, it is a fully developed, mass-produced component. Its one-channel architecture is suitable for designs requiring a single amplified audio output rather than a stereo or multi-channel output stage.
What are the key specifications of AK7835S5 that engineers should know?
The AK7835S5 is a 10 MSOP mono Class D audio amplifier with one output channel, tape-and-reel packaging, and documented I2C port-filter, ESD-protection, and EMC-countermeasure functions. The AKM technical listing identifies it as a fully developed, mass-produced integrated circuit. Output power, supply limits, frequency response, THD and noise, and thermal limits should be taken from the manufacturer datasheet before sizing speakers, capacitors, or a power supply.
Where can I download the AK7835S5 datasheet PDF?
The AK7835S5 datasheet information can be reached through the product-detail page at https://www.hotenda.com/product-detail/akm-semiconductor-inc-181/ak7835s5. That page links technical documentation for the AKM device. Use the manufacturer datasheet as the controlling reference for electrical limits, pin functions, application circuits, recommended layout, and ordering information. The AK7835S5 manufacturer part number should match the document exactly.
Where can I find the AK7835S5 pinout and 10 MSOP footprint?
The AK7835S5 uses a 10 MSOP package, and its complete numbered pinout should be taken from the manufacturer pin-description table and land pattern. The verified catalog information confirms the package type but does not expose individual pin names. Open the AK7835S5 datasheet PDF, identify the 10-pin MSOP drawing, and map every supply, ground, input, output, and control connection before PCB routing. Do not infer pin functions from a similarly named amplifier.
Is the AK7835S5 suitable for portable audio applications?
The AK7835S5 can suit portable audio designs when its electrical limits and thermal requirements match the intended speaker load. Its compact 10 MSOP package helps conserve board area, while Class D operation is generally appropriate for battery-powered audio products seeking efficient power conversion. The exact output power, supply-voltage range, quiescent current, and allowable speaker impedance must be confirmed from the manufacturer datasheet before selecting a battery, heatsinking strategy, or speaker.
What can replace the AK7835S5 on the same PCB?
No verified pin-compatible replacement for the AK7835S5 was identified in the available cross-reference results, so a drop-in substitute should not be selected without a direct package, pinout, and electrical comparison. A valid replacement must match the 10 MSOP footprint, supply range, output topology, filter requirements, control interface, and speaker-load capability. Submit the target MPN through the Request a Quote form on this page to discuss sourcing or an engineering review rather than assuming a catalog similarity.
Is AK7835S5 the same as an I2C audio amplifier with ESD protection?
The AK7835S5 is specifically listed as an I2C bus port filter with ESD protection and EMC countermeasures in addition to its mono Class D audio-amplifier classification. That combination of attributes should be treated as device-specific rather than generalized to every I2C audio amplifier. Confirm the interface pins, supported commands, electrical levels, and protection behavior in the manufacturer datasheet before using the part for control traffic or exposed connector paths.
Where can I buy AK7835S5 online?
The AK7835S5 can be requested through the Request a Quote form on this page, which connects buyers with the XAIPART sourcing workflow for the exact Asahi Kasei Microdevices/AKM part number. The part is identified in the distributor catalog as AK7835S5, an amplifier IC supplied in a 10 MSOP package. Confirm the requested suffix, reel quantity, date code, and delivery requirements when submitting the request.
What is the price of AK7835S5?
Current AK7835S5 pricing is handled through the Request a Quote form on this page so the quotation can reflect quantity, shipment packaging, and current sourcing conditions. The verified distributor snippets do not provide a qualifying quantity-break table with an explicit unit price and printed quantity. For engineering records, use the structured pricing shown alongside this page rather than relying on a stale historical catalog amount.
What is the lead time and stock status for AK7835S5?
Current AK7835S5 stock and lead time should be requested through the Request a Quote form on this page. The manufacturer catalog describes the component as fully developed and mass-produced, but that lifecycle description does not establish current inventory at XAIPART. Include your required quantity, reel format, target date, and acceptable date-code range in the request so the sourcing team can confirm the most relevant production availability.
Is AK7835S5 in stock?
The current AK7835S5 stock position is handled through the Request a Quote form on this page. A distributor search result stating that the part can be purchased does not establish XAIPART inventory. The request should identify the exact 10 MSOP part number, desired quantity, and shipment format. Factory and distribution stock can change independently, so obtain a written confirmation before committing the product to a production schedule.
AK7835S5 vs an equivalent mono Class D amplifier — which is better for a compact speaker?
The AK7835S5 should be compared with a candidate using the same 10 MSOP pinout, supply range, output-power capability, speaker impedance, control interface, and filter requirements. No verified substitute was found in the available cross-reference results, so package similarity alone is not enough to declare another amplifier a drop-in replacement. Choose the AK7835S5 when its manufacturer-specified electrical limits match the speaker, enclosure, thermal budget, and system-control requirements.
When should I choose AK7835S5 over another mono Class D amplifier?
Choose the AK7835S5 when a single-channel Class D stage in a compact 10 MSOP package, documented I2C port filtering, ESD protection, and EMC countermeasures align with the design. An alternative may be preferable if it offers a verified pin-for-pin fit, higher output power, a wider supply range, lower distortion, fewer external components, or a qualification suited to automotive or industrial use. Those comparisons require confirmed manufacturer data rather than category-level similarity.
Is AK7835S5 suitable for an embedded audio subsystem?
The AK7835S5 is suitable for an embedded mono-audio subsystem when its documented Class D output and I2C-related functions satisfy the system requirements. Place it after the audio source or DAC, provide the recommended input and output networks, and follow the manufacturer reference layout for decoupling and switching-current paths. Verify CPU interface levels and control timing so the embedded controller can configure and monitor the amplifier correctly.
How should a Class D board using AK7835S5 be laid out?
A Class D board using the AK7835S5 should keep supply-decoupling and high-current output loops compact, route sensitive audio inputs away from switching nodes, and implement the manufacturer-recommended output filter and grounding plan. The 10 MSOP footprint limits routing space, so pin escapes and power-loop geometry should be resolved before placing external components. Refer to the manufacturer application circuit and land pattern for final spacing, thermal copper, and grounding details.
What compliance and environmental information applies to AK7835S5?
The AK7835S5 is an Asahi Kasei Microdevices/AKM semiconductor supplied in a 10 MSOP package, but the available catalog snippets do not state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these declarations and the supported operating-temperature range in the manufacturer datasheet or environmental compliance documentation. The chip's cataloged ESD and EMC countermeasures describe electrical robustness functions and should not be interpreted as a complete regulatory certification.

Engineering reference data for AK7835S5 — comparison, design guidance, and compliance information.

Selection Guide

Choose the AK7835S5 when the design needs a single mono Class D audio channel in a 10 MSOP package and the manufacturer data confirms adequate supply, output-power, distortion, and thermal performance. It is particularly relevant to portable speakers, embedded audio modules, compact consumer accessories, and audible-status devices. Consider another amplifier when a verified drop-in part offers higher output power, fewer external filter components, a wider supply range, lower noise, or stronger automotive and industrial qualifications. Do not substitute based only on Class D operation or MSOP package size; compare every pin, the I2C interface, filter network, speaker-load limits, and thermal behavior. If no pin-compatible option is established, request a sourcing and engineering review for the exact AK7835S5 rather than committing to an unqualified cross-reference.

Comparison with Alternatives

Parameter This Product
Package 10 MSOP
Brand Asahi Kasei Microdevices
Product Type Mono Class D audio amplifier IC
Channel Count 1 channel
Supply Packaging Tape & Reel
Interface Function I2C bus port filter
ESD Protection Supported
EMC Countermeasures Supported
Production Status Fully developed and mass-produced
Mounting Type Surface mount

Key Differentiators

  • Single-channel Class D output in a compact package (vs No verified drop-in alternative)
  • Documented interface and protection attributes (vs No verified drop-in alternative)
  • Production-oriented supply packaging (vs No verified drop-in alternative)

Design Notes

Use the manufacturer reference layout as the basis for the 10 MSOP footprint and surrounding components. Keep the input and output capacitor connections short, place the amplifier's supply bypass capacitors immediately across its supply pins, and avoid routing sensitive input traces beneath or beside switching-current paths. The compact package leaves little room for improvised routing, so finalize component placement against the official land pattern before releasing the PCB artwork.

Class D output currents circulate rapidly through the power loop and output-filter network. Minimize the area enclosed by those connections, provide a low-impedance ground return, and separate the audio input reference from output switching nodes. Check the finished design for conducted and radiated emissions because trace length, filter-component placement, and ground geometry can affect compliance even when the amplifier itself operates correctly.

Calculate the required supply headroom and average input current from the confirmed output-power limit, supply voltage, efficiency, and quiescent current in the manufacturer datasheet. Do not select a speaker impedance or load current outside those limits. Verify startup behavior and the voltage ramp at the amplifier supply pins, since abrupt changes on a battery-powered rail can affect system reset behavior and audible transients.

Do not treat a catalog description as a complete electrical specification. In particular, confirm the 10 MSOP pin names, I2C interface details, input and output configurations, recommended filter values, thermal limits, and absolute maximum ratings in the manufacturer datasheet. A different AK-family amplifier or another mono Class D device may fit the package category without being pin-to-pin compatible, so PCB reuse requires a line-by-line pin and function review.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The available product listings identify ESD-protection and EMC-countermeasure features but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm environmental and qualification status using AKM documentation.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

AK7835S5 datasheet AK7835S5 datasheet pdf AK7835S5 pinout AK7835S5 10 MSOP footprint AK7835S5 mono Class D amplifier AK7835S5 I2C audio amplifier AK7835S5 replacement AK7835S5 equivalent AK7835S5 price AK7835S5 stock Asahi Kasei AK7835S5 AK7835S5 portable speaker amplifier

Related Components & Terms

Asahi Kasei Microdevices AKM Semiconductor AK7835S5 mono Class D audio amplifier audio amplifier IC linear amplifier analog integrated circuit semiconductor Class D amplifier mono channel 10 MSOP MSOP package family surface-mount device I2C I2C bus port filter ESD protection EMC countermeasures tape and reel packaging audio signal chain speaker driver output filter power-supply decoupling electromagnetic emissions thermal management
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details