ATMEGA1281-16MUR - 8-Bit AVR MCU 16MHz 128KB Flash | Microchip
부품 번호: ATMEGA1281-16MUR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $10.97 | $10.97 |
| 10 | $10.42 | $104.20 |
| 100 | $9.88 | $988.00 |
| 500 | $9.33 | $4,665.00 |
| 1,000 | $8.78 | $8,780.00 |
ATMEGA1281-16MUR 개요
A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripheral functions such as timers, serial interfaces, and analog-to-digital converters. The ATmega1281 belongs to the AVR family of 8-bit MCUs, which sits within the broader hierarchy of embedded processors used in industrial, automotive-adjacent, and consumer control systems.
Key features include an advanced RISC architecture with 135 powerful instructions, most executed in a single clock cycle; 54 general-purpose I/O lines; and a rich peripheral set comprising six flexible timer/counters with compare modes and PWM, four USARTs, a byte-oriented 2-wire serial interface (TWI/I2C), and a 16-channel 10-bit ADC. The device operates from a 2.7 V to 5.5 V supply, supporting both 3.3 V and 5 V designs at industrial temperature ranges.
Architecturally, the AVR core uses 32 general-purpose working registers directly connected to the ALU, allowing one-cycle instruction execution and high code efficiency for C and assembly development. In-system programmable flash enables field firmware updates through SPI, while lock bits and an on-chip debug capability support secure deployment.
Typical applications include industrial automation and control nodes, building automation and HVAC controllers, sensor acquisition systems using the 16-channel ADC, and motor control or instrumentation products that need multiple UART channels and PWM outputs.
When designing with the ATMEGA1281-16MUR, decouple the supply with 100 nF ceramic capacitors close to each VCC/GND pair, and connect the exposed pad to a solid ground plane for thermal and signal-integrity benefits.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: ATMEGA1281-16MUR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATMEGA1281-16MUR (동일 폼 팩터 및 풋프린트) — 차이점: Package, Timers/Counters, Communication Interfaces, RoHS Status, Throughput.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATMEGA1281-16MU
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATMEGA1281V-8MUR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.02 / 개
데이터시트 보기 →AT90CAN128-16MU
✅ 드롭인✓ 재고 있음
$7.43 / 개
데이터시트 보기 →ATMEGA329-16MUR
✅ 드롭인✓ 재고 있음
$3.95 / 개
데이터시트 보기 →ATMEGA1281-16MUR 최대 정격 & 전기적 특성
| Core | AVR 8-bit RISC |
| 최대 클록 주파수 | 16 MHz |
| Program Memory Size | 128 KB (64K x 16) Flash |
| SRAM Size | 8 KB |
| EEPROM Size | 4 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Number of I/O Lines | 54 |
| General Purpose Working Registers | 32 |
| Timers/Counters | 6 (flexible, with compare modes and PWM) |
| USART Channels | 4 |
| Serial Interfaces | TWI (I2C-compatible), SPI |
| ADC Channels | 16-channel |
| 데이터 버스 폭 | 8 Bit |
| 패키지 | 64-QFN (9x9 mm), VFQFN exposed pad |
| 실장 유형 | Surface Mount |
| Temperature Range | Industrial (-40C to +85C) |
| Life Cycle Stage | Active |
ATMEGA1281-16MUR 64-qfn (9x9 mm), vfqfn exposed pad 핀 구성 가이드
ATMEGA1281-16MUR(64-qfn (9x9 mm), vfqfn exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATMEGA1281-16MUR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATMEGA1281-16MUR 적합 용도: 6 애플리케이션s: Industrial Automation and Control Nodes, Building Automation and HVAC Controllers, Multi-Channel Sensor Acquisition Systems, Motor Control and Actuation, Embedded Instrumentation and Test Equipment, Prototyping and Embedded Education with MegaCore.
Industrial Automation and Control Nodes
The ATMEGA1281-16MUR fits industrial control nodes because its four USARTs support simultaneous multi-drop serial links (e.g., Modbus RTU plus a local HMI), while its 16 MHz AVR core delivers up to 16 MIPS for deterministic control loops. The industrial -40C to +85C temperature rating matches cabinet and factory-floor environments, and the 2.7 V to 5.5 V supply tolerates noisy 5 V rails. In a typical node, timers configured for PWM drive actuators and the 16-channel 10-bit ADC samples analog sensors at 15 ksps per channel. Using SPI ISP flash programming, firmware can be updated in the field without desoldering, reducing maintenance cost across deployed installations.
추천
Building Automation and HVAC Controllers
For HVAC and building automation controllers, the ATMEGA1281-16MUR provides the I/O density (54 GPIO lines) needed for damper, valve, and relay actuation, plus the 16-channel ADC for temperature, humidity, and pressure sensor inputs. The byte-oriented TWI (I2C-compatible) interface connects RTC and sensor ICs on a shared 2-wire bus, cutting harness complexity. With 128 KB flash there is ample room for PID control algorithms, scheduling tables, and communication stacks, while 8 KB SRAM supports buffering multiple network frames. The 5 V industrial-grade supply tolerates wide utility fluctuations, and six timer/counters with PWM enable proportional valve control with quantified duty-cycle resolution of up to 16 bits.
추천
Multi-Channel Sensor Acquisition Systems
Data acquisition front-ends benefit from the ATMEGA1281-16MUR's 16-channel 10-bit ADC, which multiplexes up to 16 analog inputs without external analog multiplexers, reducing board area and cost. At 16 MHz the ADC delivers up to 15 ksps at full 10-bit resolution, adequate for slow physical process monitoring. Four USARTs stream digitized data to loggers, radios, or gateways concurrently, and 8 KB SRAM buffers burst data between acquisition and transmission. The 128 KB flash stores calibration tables and per-channel compensation code. Connecting the exposed QFN pad to a solid ground plane minimizes analog ground bounce, protecting ADC effective-number-of-bits in noisy environments.
추천
Motor Control and Actuation
The ATMEGA1281-16MUR's six flexible timer/counters with compare modes and PWM outputs make it well suited to multi-axis DC and stepper motor control. Multiple PWM channels allow independent speed control of several motors from one MCU, and hardware input-capture timers measure encoder feedback precisely. The 16 MIPS AVR core executes commutation and PID loops in C with single-cycle ALU access to 32 registers, achieving loop rates in the tens of kilohertz. Gate driver ICs on the recommended list bridge the 5 V PWM outputs to power stages. Ensure 100 nF decoupling at each supply pin group to keep PWM switching noise out of the analog domain.
추천
Embedded Instrumentation and Test Equipment
Bench and embedded instruments use the ATMEGA1281-16MUR as a control and communication engine: four USARTs can simultaneously service a front-panel interface, a PC link, and auxiliary modules, while the JTAG interface supports on-chip debugging during development. The 128 KB ISP flash accommodates command parsers, scripting, and logging firmware without external memory, and 4 KB EEPROM retains calibration constants across power cycles. The 5 V logic simplifies interfacing with legacy instrument buses. PWM and counter resources generate stimulus signals or measure event timing with hardware precision, letting the MCU replace discrete timer and counter ICs and shrink instrument bill-of-materials cost.
추천
Prototyping and Embedded Education with MegaCore
The ATMEGA1281-16MUR is fully supported by the MegaCore Arduino hardware package on GitHub, which covers ATmega640/1280/1281/2560 family devices and enables rapid prototyping with the Arduino toolchain on a compact 64-QFN part. Developers can prototype on ATmega2560-based boards and migrate to the ATmega1281-16MUR for production to save cost while reusing firmware, since the peripheral map and programming model are consistent across the family. The 54 GPIO and four USARTs give students and engineers room for complex multi-peripheral projects. SPI ISP access makes bootloader-based field updates straightforward, and standard AVR programmers support the full development flow.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATMEGA1281-16MUR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATMEGA1281-16MU | ATMEGA1281V-8MUR | AT90CAN128-16MU | ATMEGA329-16MUR |
|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 32 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 2 KB |
| Max Clock Frequency | 16 MHz | 16 MHz | 8 MHz | 16 MHz | 16 MHz |
| USART Channels | 4 | 4 | 4 | 3 (CAN controller added) | 2 |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 1.8 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Special Features | 16-ch ADC, 6 timers, TWI, SPI | Identical feature set | Identical, low-voltage grade | On-chip CAN 2.0B controller | Segment LCD driver |
주요 차별점
- Four USART channels (vs AT90CAN128-16MU)
- Twice the SRAM of mid-family parts (vs ATMEGA329-16MUR)
- Full-speed 16 MHz industrial grade (vs ATMEGA1281V-8MUR)
설계 노트
The 64-QFN package includes an exposed pad under the die that must be soldered to a ground plane array of thermal vias. Connect each VCC/GND pin pair with a 100 nF ceramic capacitor placed within 2 mm of the pins, and add a 10 uF bulk capacitor near the supply entry. Route the four USART and SPI traces away from the 16 ADC inputs, and keep the ADC reference path short and filtered. Because the QFN leads are under the package, inspect solder joints with X-ray or use a via-in-pad design to verify reflow quality.
At 16 MHz the AVR core generates harmonics well into the tens of megahertz. Use a crystal with 18-22 pF load capacitors on XTAL1/XTAL2 placed close to the pins, and guard the oscillator traces with ground. If EMI is a concern, enable the system clock prescaler or use the internal RC oscillator for non-timing-critical firmware sections. Decouple the AREF pin with a dedicated 100 nF capacitor and never drive it while the internal reference is selected, or the ADC readings will be corrupted.
Verify the speed-versus-voltage curve before clocking the device: the 16 MHz grade is specified at 5 V operation, and running 16 MHz at 3.3 V is outside the safe operating envelope typical of AVR parts. Confirm the voltage rating of your selected crystal and check the BOD (brown-out detector) fuse settings so that flash writes cannot corrupt EEPROM during power dips. Finally, reserve a programming header for SPI ISP - without it, field firmware updates require reworking the board.
규정 준수 정보
EU RoHS and REACH compliance listed for the ATMEGA1281-16MU variant per Abacus Technologies compliance data; MUR suffix denotes Microchip green packaging. AEC-Q100 status not stated in provided data.
