ATMEGA1609-MFR - 8-bit AVR MCU 20MHz 16KB Flash QFN-48 | Microchip
부품 번호: ATMEGA1609-MFR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1.85 | $1.85 |
| 10 | $1.7 | $17.00 |
| 100 | $1.52 | $152.00 |
| 500 | $1.38 | $690.00 |
| 1,000 | $1.25 | $1,250.00 |
ATMEGA1609-MFR 개요
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory and peripherals on one silicon die. Within the embedded-systems hierarchy, the ATMEGA1609 belongs to the AVR RISC microcontroller family, the megaAVR product class, and the broader power-management-adjacent domain of embedded control ICs. The AVR core executes most instructions in a single clock cycle using a Harvard architecture, delivering efficient MIPS-per-mHz performance for cost-sensitive control tasks.
Key features of the ATMEGA1609-MFR include the AVR CPU with a hardware multiplier, Core Independent Peripherals (CIPs) such as TCA/TCB timers and the configurable custom logic (CCL) block, an operating voltage range of 1.8 V to 5.5 V, and event-system routing that lets peripherals communicate without CPU intervention. The FuSa designation means the device is supported by documentation packages aligned with functional-safety development, useful in IEC 61508-style industrial projects.
Technical depth: the megaAVR 0-series uses the latest AVR core with a two-stage pipeline, up to 20 MHz clocking from internal or external sources, multi-voltage operation via an optional on-chip buck or LDO regulator (MVIO on related family members), and a rich peripheral set including USARTs, SPI, TWI (I2C), 10-bit ADC, analog comparators and a real-time counter. Flash is organized with an optional boot section supporting self-programming for field firmware updates.
Typical applications include industrial control nodes, home-appliance and HVAC boards, motor-control front ends, sensor-hub and IoT edge nodes, and safety-oriented embedded controllers that benefit from the FuSa documentation. The wide 1.8-5.5 V range allows direct battery or 5 V rail operation without an external regulator.
Design consideration: select the MFR (QFN-48) package only when your PCB footprint is the 6x6 mm VQFN land pattern; the AU/AF TQFP variants share the same die but not the footprint, so a QFN-to-TQFP change is a PCB redesign, not a drop-in swap.
This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ content not found in the manufacturer datasheet, giving engineers a single decision-ready reference as of 2026-09-16.
드롭인 대체품: ATMEGA1609-MFR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATMEGA1609-MFR (동일 폼 팩터 및 풋프린트) — 차이점: Series, Package, Core Processor, Peripherals, Flash Memory.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATMEGA3209-MF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.55 / 개
데이터시트 보기 →ATMEGA4809-MF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.85 / 개
데이터시트 보기 →ATMEGA1608-MF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.94 / 개
데이터시트 보기 →ATMEGA809-MF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.75 / 개
데이터시트 보기 →ATMEGA1609-MFR 최대 정격 & 전기적 특성
| Core Processor | AVR (8-bit RISC) with hardware multiplier |
| Core Size | 8-bit |
| 최대 클록 주파수 | 20 MHz |
| Flash Memory | 16 KB (16K x 8) |
| SRAM | 2 KB |
| EEPROM | 256 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Series | megaAVR 0-series, Functional Safety (FuSa) |
| 패키지 | 48-UQFN (6x6 mm) |
| 실장 유형 | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Peripheral Features | Core Independent Peripherals (CIPs), configurable custom logic, event system |
| Communication Interfaces | USART, SPI, TWI (I2C) |
| ADC Resolution | 10-bit |
| Product Status | Active |
ATMEGA1609-MFR 48-uqfn (6x6 mm) 핀 구성 가이드
ATMEGA1609-MFR(48-uqfn (6x6 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATMEGA1609-MFR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATMEGA1609-MFR 적합 용도: 6 애플리케이션s: Industrial Control Nodes, Home Appliances and HVAC, IoT Edge Sensor Nodes, Motor Control Front Ends, Safety-Oriented Embedded Controllers, Test and Measurement Handheld Instruments.
Industrial Control Nodes
The ATMEGA1609-MFR fits industrial control nodes because its 20 MHz AVR core with hardware multiplier handles closed-loop control math, while 16 KB Flash and 2 KB SRAM accommodate Modbus-style communication stacks and state machines. The FuSa classification provides safety documentation packages that support IEC 61508-style development workflows common on factory floors. In typical use, the MCU runs the control loop from the TCA/TCB timers with the event system routing sensor triggers to outputs without CPU latency, and USART or TWI links back to a SCADA or PLC layer. The 1.8-5.5 V supply range allows direct connection to 5 V industrial rails or 3.3 V logic domains, reducing board complexity. Unlike larger 32-bit MCUs, the megaAVR 0-series keeps BOM cost low while Core Independent Peripherals offload timing-critical tasks.
추천
Home Appliances and HVAC
Appliance and HVAC boards benefit from the ATMEGA1609-MFR's combination of 256 bytes of EEPROM for storing calibration and user settings through power cycles, and the wide 1.8 V to 5.5 V operating range that tolerates unregulated supply conditions. The 10-bit ADC reads NTC thermistors, potentiometers and current-sense signals for compressor or heater control, while CCL and event-system peripherals manage fan PWM and button debouncing independently of the CPU. The 48-pin QFN exposes enough GPIO for displays, relays and user interfaces in a compact 6x6 mm footprint. Firmware boot-section self-programming supports field updates for appliance controllers already deployed in the field. Compared with legacy ATmega328P-class parts, the 0-series offers better peripheral autonomy and lower quiescent operation in standby, trimming energy-star style standby budgets.
추천
IoT Edge Sensor Nodes
For battery- or bus-powered IoT edge nodes, the ATMEGA1609-MFR offers an efficient 8-bit AVR core at 20 MHz with low-power standby modes and a real-time counter for periodic wake-up sampling. The 10-bit ADC digitizes humidity, temperature or gas sensor outputs, and USART or TWI interfaces connect to radio modules or external EEPROM. The 2 KB SRAM is sufficient for packet buffers used in lightweight protocols, and the 16 KB Flash holds the application plus an OTA-style bootloader in the optional boot section. The 6x6 mm 48-UQFN keeps node PCBs small, while the 1.8 V floor supports operation directly from two alkaline cells or a single LiFePO4 cell with minimal regulation. Designers should budget Flash carefully, since 16 KB is modest for TLS-heavy stacks - use lightweight transport protocols or upgrade pin-compatibly to ATMEGA4809-MF.
추천
Motor Control Front Ends
The ATMEGA1609-MFR serves as a motor-control front end where its hardware multiplier accelerates PI-loop arithmetic and its timers generate PWM for BLDC, DC or stepper drivers. The 10-bit ADC supports current and back-EMF sampling through multiple channels, and analog comparators provide hardware trip zones for over-current protection without software latency. Because the megaAVR 0-series event system routes comparator outputs directly to timer fault/capture inputs, emergency shutdown paths execute in hardware microseconds. The 48-pin package supplies enough GPIO for gate-driver enables, encoder inputs and fault reporting. The part interfaces cleanly with external gate drivers or SMART MOSFET devices; keep sense-resistor filtering within ADC sampling windows per the family datasheet. For higher pin-count or Flash demands, ATMEGA3209-MF is a direct footprint upgrade.
추천
Safety-Oriented Embedded Controllers
The FuSa (Functional Safety) designation of the ATMEGA1609-MFR makes it a candidate for safety-oriented embedded controllers in machinery, process equipment and building systems where developers must produce safety cases with manufacturer documentation support. Microchip provides collateral for the megaAVR 0-series FuSa package that developers integrate into IEC 61508-style workflows. Practically, the MCU implements watchdog-supervised control paths, plausibility checks via the ADC and comparators, and redundant reading of critical inputs using the event system and CCL. The 20 MHz core gives headroom for diagnostic routines alongside the main control loop, and the 48-pin footprint supports cross-checking GPIO patterns. Teams should still perform their own safety analyses - the FuSa classification provides documentation support, not a turnkey certification; always obtain the current safety manual from Microchip for your target standard and SIL level.
추천
Test and Measurement Handheld Instruments
Handheld multimeters, environmental meters and panel instruments use the ATMEGA1609-MFR for its balance of low power, ADC accuracy and simple UI driving. The 10-bit ADC with internal references measures battery status and sensor channels; TWI drives LCD or OLED display controllers; and USART talks to PC tooling for calibration. The 256-byte EEPROM persists calibration constants across battery swaps, and the 1.8 V floor extends usable battery life relative to 2.7 V-minimum parts. The 20 MHz AVR core with hardware multiplier computes RMS and averaging in firmware with predictable timing. The 48-UQFN 6x6 mm package suits compact instrument PCBs, and the QFN's exposed pad aids heat spreading in enclosed handheld housings. For production, tape-and-reel MFR delivery feeds automated assembly lines efficiently.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATMEGA1609-MFR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATMEGA3209-MF | ATMEGA4809-MF | ATMEGA1608-MF | ATMEGA809-MF |
|---|---|---|---|---|---|
| Package | 48-UQFN (6x6 mm) | 48-UQFN (6x6 mm) - same | 48-UQFN (6x6 mm) - same | 48-UQFN (6x6 mm) - same | 48-UQFN (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 32 KB | 48 KB | 16 KB | 8 KB |
| SRAM | 2 KB | 4 KB | 6 KB | 2 KB | 1 KB |
| Core Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Drop-in Compatible | - | Yes - pin-to-pin, same QFN-48 | Yes - pin-to-pin, same QFN-48 | Yes - pin-to-pin, same QFN-48 | Yes - pin-to-pin, same QFN-48 |
주요 차별점
- Functional Safety (FuSa) documentation support (vs ATMEGA1608-MF)
- Cost-optimized 16 KB point in the 48-pin QFN family (vs ATMEGA4809-MF)
- Full 48-pin GPIO richness versus 32-pin parts (vs ATMEGA1608 (32-pin packages))
설계 노트
The 48-UQFN 6x6 mm package requires a well-defined PCB land pattern with solder-mask-defined or non-solder-mask-defined pads per the Microchip family datasheet. Add a central exposed thermal/electrical pad (on variants that include one) tied to GND with a via array for heat spreading and grounding. Confirm whether your specific MFR ordering code maps to a wettable-flank or standard QFN finish before defining stencil apertures - inspect the Microchip package outline drawing for the exact orderable code.
Decouple each VDD/AVDD pin pair with 100 nF ceramics placed within a few millimeters of the pins, plus bulk capacitance (4.7-10 uF) near the supply entry. The megaAVR 0-series tolerates 1.8-5.5 V, but ADC accuracy depends on AVDD quality; if ADC precision matters, filter AVDD with an RC or ferrite from the digital rail. If using an external 20 MHz crystal rather than the internal oscillator, follow the datasheet load-capacitor guidance and layout the crystal traces short and guarded.
Programming uses the single-pin UPDI interface - do not use legacy ISP/debugWIRE tooling from older AVR generations; use a PICkit 4, SNAP, or Atmel-ICE with UPDI mode. Another frequent pitfall is assuming the TQFP (AU/AF) parts are drop-in for the QFN (MF/MFR) - they are not, as land patterns differ entirely. Finally, remember Flash size differences across 809/1609/3209/4809: firmware compiled at the 16 KB limit will not link on ATMEGA809-MF after a downgrade swap.
규정 준수 정보
Compliance data not stated in the provided verified web data. Microchip standard product is typically RoHS compliant, but confirm on the official Microchip ATMEGA1609 product page before specifying.
