ATMEGA1609-MU - 20MHz, 16KB Flash 8-bit AVR MCU | Microchip
부품 번호: ATMEGA1609-MU ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1.32 | $1.32 |
| 10 | $1.19 | $11.90 |
| 100 | $1.06 | $106.00 |
| 500 | $0.97 | $485.00 |
| 1,000 | $0.89 | $890.00 |
ATMEGA1609-MU 개요
A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest level of the embedded systems hierarchy (MCU -> embedded processor -> computing system). The megaAVR 0 family sits within Microchip's 8-bit AVR product line, built around an AVR RISC core with a hardware multiplier and Microchip's Core Independent Peripherals (CIPs), which offload tasks from the CPU for deterministic real-time behavior.
Key features of the ATMEGA1609 include a 20 MHz maximum CPU clock, 16 KB of self-programmable Flash memory, 2 KB SRAM, 256 bytes of EEPROM for non-volatile parameter storage, and I2C, SPI, and UART/USART connectivity interfaces. On-chip peripherals include brown-out detection, a watchdog timer, PWM-capable timers, analog comparators, and ADC channels. The device is positioned for Functional Safety (FuSa) development support, making it attractive for applications where design documentation for safety compliance is required.
Architecturally, the megaAVR 0 series executes most instructions in a single cycle thanks to its Harvard-architecture RISC design, and the integrated hardware multiplier accelerates math-heavy control loops. The peripheral set is clocked independently of the CPU, so sleep modes can keep analog and timing functions alive at microamp-level currents.
Typical applications include industrial control nodes, consumer appliances, lighting and motor control, and general-purpose embedded systems that need modest Flash with rich peripherals in a compact 48-pin footprint.
A key design consideration: the ATMEGA1609 operates across 1.8V to 5.5V, so verify timing parameters at your target voltage, since maximum safe clock frequency derates at lower supply levels.
This page synthesizes distributor pricing, drop-in family alternatives, design notes, and FAQ content not found in any single manufacturer datasheet.
드롭인 대체품: ATMEGA1609-MU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATMEGA1609-MU (동일 폼 팩터 및 풋프린트) — 차이점: Core Processor, Package, Series, Connectivity, Functional Safety Support.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATMEGA1609-AUR
✅ 드롭인✓ 재고 있음
$1.51 / 개
데이터시트 보기 →ATMEGA1609-AFR
✅ 드롭인✓ 재고 있음
$1.87 / 개
데이터시트 보기 →ATMEGA4809-MU
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATMEGA3209-MU
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.89 / 개
데이터시트 보기 →ATMEGA809-MU
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATMEGA1609-MU 최대 정격 & 전기적 특성
| Core Processor | AVR 8-bit RISC |
| Core Size | 8-bit |
| 최대 클록 주파수 | 20 MHz |
| Flash Memory Size | 16 KB (16K x 8) |
| SRAM Size | 2 KB |
| EEPROM Size | 256 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Connectivity | I2C, SPI, UART/USART |
| Series | megaAVR 0 (ATmega1609) |
| 패키지 | 48-UQFN (6x6 mm) |
| Number of Terminals | 48 |
| 실장 유형 | Surface Mount |
| Temperature Grade | Industrial |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Functional Safety Support | Yes (FuSa) |
| Hardware Multiplier | Yes |
| Program Memory Type | FLASH |
ATMEGA1609-MU 48-uqfn (6x6 mm) 핀 구성 가이드
ATMEGA1609-MU(48-uqfn (6x6 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATMEGA1609-MU.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATMEGA1609-MU 적합 용도: 6 애플리케이션s: Industrial Control and Automation Nodes, Home Appliances and White Goods, LED Lighting and Dimming Control, Sensor Hubs and IoT Edge Nodes, Motor Control and Fan Drivers, Functional Safety-Oriented Designs.
Industrial Control and Automation Nodes
The ATMEGA1609-MU fits industrial control nodes where deterministic, low-cost 8-bit control is sufficient. Its industrial temperature grade, brown-out reset, and watchdog timer provide the robustness factory-floor nodes demand, while Core Independent Peripherals let timers, comparators, and communication blocks run without CPU intervention - keeping sensor sampling and actuator PWM alive even during software stalls. With I2C, SPI, and UART/USART on board, the MCU bridges field sensors to higher-level controllers over Modbus-style UART links. The 20 MHz AVR core with hardware multiplier handles fixed-point scaling and simple PID loops in the 16 KB Flash budget, and the 48-UQFN 6x6 mm package fits dense I/O boards. Because the footprint is shared with the 32 KB and 48 KB family members, capacity upgrades require no PCB respin.
추천
Home Appliances and White Goods
Appliance control boards benefit from the ATMEGA1609-MU's 1.8V to 5.5V supply flexibility, allowing direct operation from regulated 3.3V or 5V rails common in appliance electronics. The 256-byte EEPROM stores calibration constants, cycle counters, and user settings that must survive power cycling, while Flash self-programming supports field firmware updates via the bootloader. Core Independent Peripherals drive relay and TRIAC timing sequences for motors, heaters, and pumps without constant CPU supervision, and the brown-out detector prevents corrupted writes during mains dips. The 20 MHz core with hardware multiplier executes encoder decoding and closed-loop fan control with margin. The 48-pin UQFN offers enough GPIO for keypad matrices, LED indicators, and multiple sensor inputs in a compact 6x6 mm footprint.
추천
LED Lighting and Dimming Control
The ATMEGA1609-MU generates multi-channel PWM dimming for LED fixtures using its hardware timers, with Core Independent Peripheral waveform outputs continuing to switch channels accurately even when the CPU sleeps, reducing average current draw. The 16 KB Flash accommodates dimming curves, DMX-style or DALI-style protocol parsing over UART, and configuration menus simultaneously. Operation from 1.8V to 5.5V matches single-cell Li-ion battery or 5V supply architectures in portable and architectural luminaires. The 256-byte EEPROM stores last-set brightness levels across power cycles. Its 20 MHz clock resolution supports flicker-free dimming at several kilohertz PWM frequencies, and the industrial temperature grade suits enclosed driver housings with elevated ambient temperatures, where many consumer-grade MCUs fall outside specification.
추천
Sensor Hubs and IoT Edge Nodes
As a battery-powered sensor hub, the ATMEGA1609-MU aggregates I2C and SPI sensor data and forwards it over UART to a radio module or gateway. Sleep-mode operation with Core Independent Peripherals allows periodic sensor polling and threshold comparison by analog comparators while the CPU remains off, extending battery life in duty-cycled designs. The 2 KB SRAM buffers packet construction, and the 16 KB Flash holds the protocol stack and OTA-style bootloader. The 20 MHz core executes CRC checks and fixed-point filtering with the hardware multiplier. The 48-UQFN provides abundant GPIO for interrupts, chip-selects, and power-gating of sensor rails, and the same footprint scales to the ATMEGA4809-MU if the application later adds TLS-style heavier protocol code.
추천
Motor Control and Fan Drivers
The ATMEGA1609-MU supports small motor control - DC, stepper, and sensorless trapezoidal BLDC - using hardware PWM timers with complementary outputs and dead-time managed in firmware or by external gate drivers. The hardware multiplier accelerates the fixed-point arithmetic used in speed PI loops at 20 MHz, and the analog comparator plus ADC feedback supports back-EMF zero-cross detection for commutation. Brown-out detection prevents corrupt PWM states during supply dips, protecting both MOSFETs and the motor winding. The 16 KB Flash holds commutation tables, startup ramps, and fault handling simultaneously. Its industrial temperature rating and robust CIP-based PWM generation make it reliable in enclosed drives, while the identical 48-UQFN footprint to larger Flash family members preserves a firmware growth path.
추천
Functional Safety-Oriented Designs
Microchip positions the megaAVR 0 family, including the ATMEGA1609, with Functional Safety (FuSa) support packages, making it a candidate for safety-related subsystems up to the level supported by the family documentation. The device provides the building blocks safety concepts require: windowed watchdog timer, brown-out detection, independent clock sources, and GPIO read-back, which designers combine with software diagnostics to meet target safety metrics. The 16 KB Flash is sufficient for compact safety logic such as interlock monitoring, e-stop handling, and redundant channel comparison in industrial equipment. Because documentation packages and family commonality span the ATmega809/1609/3209/4809 range, a safety case developed on this footprint transfers across memory variants without requalifying the silicon architecture.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATMEGA1609-MU — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATMEGA1609-AUR | ATMEGA4809-MU | ATMEGA3209-MU | ATMEGA809-MU |
|---|---|---|---|---|---|
| Package | 48-UQFN (6x6 mm) | 48-UQFN (6x6 mm) - same | 48-UQFN (6x6 mm) - same | 48-UQFN (6x6 mm) - same | 48-UQFN (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 16 KB | 48 KB | 32 KB | 8 KB |
| SRAM | 2 KB | 2 KB | 6 KB | 4 KB | 1 KB |
| Maximum Clock | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Qualification | Industrial | Automotive (AEC-Q100) | Industrial | Industrial | Industrial |
| Connectivity | I2C, SPI, UART/USART | I2C, SPI, UART/USART | I2C, SPI, UART/USART | I2C, SPI, UART/USART | I2C, SPI, UART/USART |
주요 차별점
- Optimal memory/cost point in the 48-pin megaAVR 0 family (vs ATMEGA4809-MU)
- Automotive qualification path without redesign (vs ATMEGA1609-AUR)
- Flash headroom over entry variant (vs ATMEGA809-MU)
- Honest limitation vs 32-bit MCUs (vs ATMEGA4809-MU)
설계 노트
Design the supply for the full 1.8V to 5.5V range only if your clock plan supports it: maximum safe operating frequency derates at reduced VDD on AVR devices, so a 20 MHz design must run near 4.5V to 5.5V. Place a 100 nF ceramic decoupling capacitor at VDD within 2 mm of the pin plus one bulk 4.7 uF to 10 uF capacitor per board. The 48-UQFN center exposed pad should be soldered to a grounded thermal pad for mechanical reliability and ground return, even though it is not the primary thermal path for this low-power MCU.
Reserve the UPDI pin with a 3-pad programming header (UPDI, VDD, GND) accessible at the board edge; UPDI shares no pins with peripherals, so no multiplexing conflicts arise. Route crystal pins (if using an external clock) with short traces and guard with ground; the internal 20 MHz oscillator is typically accurate enough for UART, but verify baud-rate tolerance against your worst-case temperature range before skipping the crystal. Keep I2C traces under 30 cm and use 4.7 kohm pull-ups on SDA/SCL for standard 3.3V operation.
Three common mistakes with megaAVR 0 devices: (1) confusing the MU (48-UQFN) with the MFR (32-pin VQFN) variant - they are NOT footprint-compatible despite identical silicon; (2) assuming legacy megaAVR (ATmega328P-style) code compiles unchanged - the 0-series has a different peripheral register map, so plan a port or start with MegaCoreX/AVR-Lib support; (3) forgetting that EEPROM writes require the CPU to manage the write sequence with interrupts handled correctly to avoid corruption during brown-out events.
Estimated: the ATMEGA1609-MU draws only a few milliamperes at 20 MHz and 5V (tens of milliwatts), so junction temperature rise above ambient is typically under a few degrees C and no heatsinking is required. Confirm against the datasheet active-supply-current curve for your exact VDD/frequency point before finalizing the thermal budget for sealed enclosures with elevated ambient temperature (industrial grade supports the -40C to +85C ambient range typical for the grade).
규정 준수 정보
RoHS/lead-free inferred from current-production no-lead UQFN package per distributor data; REACH, halogen-free, and conflict-minerals declarations should be obtained from Microchip's official Product Environmental Compliance documents. This standard MU part is not AEC-Q100 qualified; use ATMEGA1609-AUR for automotive.
