ATMEGA4809-AFR - 8-bit AVR MCU 20MHz 48KB Flash TQFP-48 | Microchip
부품 번호: ATMEGA4809-AFR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.1 | $2.10 |
| 10 | $1.89 | $18.90 |
| 100 | $1.68 | $168.00 |
| 500 | $1.52 | $760.00 |
| 1,000 | $1.36 | $1,360.00 |
ATMEGA4809-AFR 개요
An 8-bit microcontroller (MCU) is an integrated circuit that contains a processor core, memory, and programmable input/output peripherals on a single chip, executing one instruction per cycle over 8-bit data words. Within the power and control hierarchy of embedded systems, MCUs sit at the application layer beneath system-on-chip devices, handling real-time control, sensing, and communication tasks in everything from appliances to industrial automation.
Key features of the ATMEGA4809-AFR include Core Independent Peripherals (CIPs) that operate without CPU intervention, a 10-bit ADC, analog comparators, and multiple serial interfaces including UART, SPI, and I2C/TWI. The AVR core with hardware multiplier delivers efficient 8-bit computation, while low-power features such as sleep modes and event system routing reduce energy consumption in battery-operated designs.
Technically, the megaAVR 0-series uses an enhanced AVR RISC architecture with a single-cycle instruction execution model and an event system that allows peripherals to signal each other directly. The 48 KB self-programmable Flash supports in-system programming via UPDI (Unified Program and Debug Interface), simplifying production and field updates.
Typical applications include Arduino-compatible boards (the Arduino Nano Every uses the ATmega4809), industrial control and sensing nodes, home appliances, and touch-sensing interfaces with the integrated Peripheral Touch Controller.
A key design consideration is supply voltage: the device operates at 3.3V or 5V logic levels, and Flash endurance plus ADC accuracy depend on operating voltage and temperature ranges specified in the datasheet.
This page synthesizes distributor data, drop-in alternatives within the megaAVR 0-series family, pinout information, and practical design notes not found in the manufacturer datasheet, providing comparison and sourcing context as of 2026-09-18.
드롭인 대체품: ATMEGA4809-AFR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATMEGA4809-AFR (동일 폼 팩터 및 풋프린트) — 차이점: SRAM, Operating Temperature, Core Processor, Package, Flash Memory.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATMEGA4809-AUR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.74 / 개
데이터시트 보기 →ATMEGA4809-AU
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATMEGA4809-AF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.92 / 개
데이터시트 보기 →ATMEGA4809-AN
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATMEGA4809-AFR 최대 정격 & 전기적 특성
| Core | AVR 8-bit |
| Core Size | 8-bit |
| Series | megaAVR 0 |
| 최대 클록 주파수 | 20 MHz |
| Program Memory Size | 48 KB (48K x 8) Flash |
| SRAM Size | 6 KB |
| EEPROM Size | 256 B |
| 공급 전압 | 1.8 V to 5.5 V (3.3V/5V operation) |
| 데이터 버스 폭 | 8 bit |
| Programmability | UPDI (Unified Program and Debug Interface) |
| Peripheral Features | Core Independent Peripherals (CIP), 10-bit ADC, event system, Peripheral Touch Controller |
| Communication Interfaces | UART, SPI, I2C/TWI |
| 패키지 / 케이스 | TQFP-48 (7x7 mm) |
| 장착 스타일 | SMD/SMT |
| 동작 온도 | -40C to +105C |
| Packaging | Tape & Reel (R suffix) |
| Functional Safety | FuSa variant per DigiKey listing |
| RoHS 상태 | Compliant |
ATMEGA4809-AFR 핀 구성
| 핀 1 | PB5 — Port B bit 5 (GPIO/analog) |
| 핀 2 | PB4 — Port B bit 4 (GPIO/analog) |
| 핀 3 | PB3 — Port B bit 3 (GPIO/analog) |
| 핀 4 | PB2 — Port B bit 2 (GPIO/analog) |
| 핀 5 | PB1 — Port B bit 1 (GPIO/analog) |
| 핀 6 | PB0 — Port B bit 0 (GPIO/analog, analog comparator inputs) |
| 핀 7 | GND — Ground |
| 핀 8 | VDD — Power supply (1.8V to 5.5V) |
| 핀 9 | PC7 — Port C bit 7 (GPIO) |
| 핀 10 | PC6 — Port C bit 6 (GPIO) |
| 핀 11 | PC5 — Port C bit 5 (GPIO/USART alt) |
| 핀 12 | PC4 — Port C bit 4 (GPIO/USART alt) |
| 핀 13 | PC3 — Port C bit 3 (GPIO) |
| 핀 14 | PC2 — Port C bit 2 (GPIO) |
| 핀 15 | PC1 — Port C bit 1 (GPIO) |
| 핀 16 | PC0 — Port C bit 0 (GPIO) |
| 핀 17 | PD7 — Port D bit 7 (GPIO/analog) |
| 핀 18 | PD6 — Port D bit 6 (GPIO/analog) |
| 핀 19 | PD5 — Port D bit 5 (GPIO/analog) |
| 핀 20 | PD4 — Port D bit 4 (GPIO/analog) |
| 핀 21 | PD3 — Port D bit 3 (GPIO/analog) |
| 핀 22 | PD2 — Port D bit 2 (GPIO/analog) |
| 핀 23 | PD1 — Port D bit 1 (GPIO/analog) |
| 핀 24 | PD0 — Port D bit 0 (GPIO/analog) |
| 핀 25 | PE3 — Port E bit 3 (GPIO) |
| 핀 26 | PE2 — Port E bit 2 (GPIO) |
| 핀 27 | PE1 — Port E bit 1 (GPIO) |
| 핀 28 | PE0 — Port E bit 0 (GPIO) |
| 핀 29 | GND — Ground |
| 핀 30 | VDD — Power supply (1.8V to 5.5V) |
| 핀 31 | PF7 — Port F bit 7 (GPIO/analog) |
| 핀 32 | PF6 — Port F bit 6 (GPIO/analog) |
| 핀 33 | PF5 — Port F bit 5 (GPIO/analog) |
| 핀 34 | PF4 — Port F bit 4 (GPIO/analog) |
| 핀 35 | PF3 — Port F bit 3 (GPIO/analog) |
| 핀 36 | PF2 — Port F bit 2 (GPIO/analog) |
| 핀 37 | PF1 — Port F bit 1 (GPIO/analog) |
| 핀 38 | PF0 — Port F bit 0 (GPIO/analog) |
| 핀 39 | PA7 — Port A bit 7 (GPIO/analog) |
| 핀 40 | PA6 — Port A bit 6 (GPIO/analog) |
| 핀 41 | PA5 — Port A bit 5 (GPIO/analog) |
| 핀 42 | PA4 — Port A bit 4 (GPIO/analog) |
| 핀 43 | PA3 — Port A bit 3 (GPIO/analog) |
| 핀 44 | PA2 — Port A bit 2 (GPIO/analog) |
| 핀 45 | PA1 — Port A bit 1 (GPIO/analog) |
| 핀 46 | PA0 — Port A bit 0 (GPIO/analog, external clock option) |
| 핀 47 | UPDI — Unified Program and Debug Interface |
| 핀 48 | VDD — Power supply (1.8V to 5.5V) |
일반적인 애플리케이션
ATMEGA4809-AFR 적합 용도: 6 애플리케이션s: Arduino-Compatible Development Boards, Industrial Control and Automation Nodes, Capacitive Touch User Interfaces, Home Appliance Control, Sensor Acquisition and IoT Edge Nodes, Educational and Prototyping Platforms.
Arduino-Compatible Development Boards
The ATmega4809 is the MCU at the heart of the Arduino Nano Every and Arduino Uno WiFi Rev2, making the ATMEGA4809-AFR a natural choice for custom Arduino-compatible hardware. Its 48 KB Flash and 6 KB SRAM roughly double the ATmega328P budget, so larger sketches, buffers, and libraries fit without optimization gymnastics. The UPDI single-wire interface simplifies bootloader and debug wiring on small boards. Native Arduino IDE support plus the community MegaCoreX package (which defines the full 48-pin-standard variant pinout) accelerate bring-up. Designers should verify that any Nano Every-derived circuit matches the official reference design, since compatible boards differ in USB bridge and regulator topology.
추천
Industrial Control and Automation Nodes
With an industrial -40C to +105C operating range, Core Independent Peripherals, and a 20 MHz AVR core with hardware multiplier, the ATMEGA4809-AFR fits industrial sensor nodes, motor-control adjuncts, and actuator interfaces. The event system routes timer, comparator, and ADC signals directly between peripherals, keeping control loops deterministic even when the CPU is servicing communication. Multiple UART, SPI, and TWI interfaces support Modbus-style fieldbus links and sensor aggregation. The 5V-compatible I/O simplifies interfacing with legacy 24V-logic-adjacent industrial circuitry through level shifting. Designers should budget Flash endurance and use the 256-byte EEPROM for configuration storage with wear-leveling awareness.
추천
Capacitive Touch User Interfaces
The integrated Peripheral Touch Controller (PTC) on the ATMEGA4809-AFR enables capacitive touch buttons, sliders, and wheels without a dedicated touch IC, reducing BOM cost in appliance panels and consumer controls. Combined with Core Independent Peripherals, touch acquisition can run in hardware-assisted cycles while the CPU sleeps between scans, cutting average current in always-on interfaces. The 48-pin TQFP offers up to 41 GPIO, enough for touch electrodes plus LED feedback and UART links to a main controller. Microchip provides touch tuning tools and application notes to optimize sensitivity and EMC robustness; follow the recommended ground-plane and electrode layout guidelines in the datasheet for reliable water-tolerant performance.
추천
Home Appliance Control
Appliance control boards benefit from the ATMEGA4809-AFR's combination of 48 KB self-programmable Flash, -40C to +105C industrial temperature rating, and 5V-tolerant peripheral set. The 10-bit ADC reads thermistors and potentiometers, analog comparators protect against over-current conditions in hardware, and the event system lets a timer trip PWM outputs without CPU latency for motor or heater control. The 256-byte EEPROM stores calibration and user settings across power cycles. UPDI programming enables in-field firmware updates through a single wire routed to a service connector, reducing service cost. Its Core Independent Peripherals and low-power sleep modes also suit battery-backup standby circuits where a few microamps matter.
추천
Sensor Acquisition and IoT Edge Nodes
For battery-powered sensor nodes, the ATMEGA4809-AFR pairs its 20 MHz compute headroom with low-power features: sleep modes, peripheral operation independent of the CPU, and the event system that can capture an ADC result on a timer trigger while the core sleeps. Six kilobytes of SRAM accommodates ring buffers for burst sensor data and lightweight protocol stacks, while 48 KB Flash holds application plus OTA-updatable firmware. UART, SPI, and TWI interfaces connect radios, MEMS sensors, and external EEPROMs directly. Designers should profile sleep-mode currents against datasheet electrical characteristics and size the 10-bit ADC front-end filtering per application note guidance to balance noise, speed, and energy per sample.
추천
Educational and Prototyping Platforms
The ATMEGA4809-AFR is well suited to university labs and maker prototyping because it bridges classic AVR teaching material and modern peripherals: students can program it through Arduino IDE (Nano Every target) or MegaCoreX, while learning Core Independent Peripherals, the event system, and UPDI debugging that mirror industry practice in Microchip's newer families. The 48-pin TQFP is hand-solderable on adapter boards or inexpensive TQFP-48 footprints, and single-wire UPDI needs only a low-cost programmer. Six kilobytes of SRAM prevents early frustration with memory limits, and the hardware multiplier enables fixed-point DSP exercises. Reference designs and community libraries further lower the entry barrier for coursework and rapid breadboard-to-PCB iterations.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATMEGA4809-AFR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATMEGA4809-AUR | ATMEGA4809-AU | ATMEGA4809-AF | ATMEGA4809-AN |
|---|---|---|---|---|---|
| Package | TQFP-48 (7x7 mm) | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same | TQFP-48 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 48 KB | 48 KB | 48 KB | 48 KB | 48 KB |
| SRAM | 6 KB | 6 KB | 6 KB | 6 KB | 6 KB |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | 0C to +70C (commercial) | -40C to +105C |
| Packaging Format | Tape & Reel | Tape & Reel | Tray | Tray | Tray |
| Programming Interface | UPDI | UPDI | UPDI | UPDI | UPDI |
주요 차별점
- Double the memory of classic ATmega parts (vs ATMEGA328PB-MU)
- Single-wire UPDI programming (vs ATMEGA32A-AU)
- Industrial temperature with reel packaging (vs ATMEGA4809-AF)
설계 노트
Place 100 nF ceramic decoupling capacitors directly across each VDD/GND pair (pins 7/8 and 29/30, plus pin 48), with short, low-inductance traces to the ground plane. The TQFP-48 7x7 mm footprint has a 0.5 mm pin pitch - use solder-mask-defined pads per IPC-recommended TQFP land patterns and verify paste aperture reduction to avoid bridging on reflow. Route the UPDI pin to a 3-pad or Tag-Connect footprint for in-system programming; keep it free of strong pull-ups that could interfere with UPDI communication.
The ATMEGA4809-AFR operates from 1.8V to 5.5V, but clock frequency and Flash write reliability are voltage-dependent: consult the electrical characteristics tables in datasheet DS40002173B before running 20 MHz near the low-voltage corner. Estimated: at 5 V and moderate I/O loading, core current is in the low milliamp range; size the 3.3 V or 5 V regulator with margin for I/O currents driving LEDs or buses. Add bulk capacitance (4.7 uF to 10 uF) near the supply pins alongside the 100 nF decoupling.
Three common pitfalls: (1) Do not confuse the R (tape-and-reel) suffix ordering with prototype quantities - reels are typically 3000+ pieces; order -AU tray units for development. (2) Migrating from ATmega328P-style ISP to ATmega4809 requires a UPDI programmer; SPI ISP hardware will not work. (3) Per the datasheet, on 40-pin variants PB5:0 and PC7:6 must be disabled or pulled up; this does not apply to the 48-pin ATMEGA4809-AFR, but code ported from 40-pin designs should be reviewed for pin-mapping assumptions.
규정 준수 정보
RoHS compliance per Microchip product listing for ATMEGA4809-AFR (standard green/RoHS package option). REACH, halogen-free, and conflict-minerals status not stated in the retrieved web data - verify on the Microchip product page.
