ATSAM4S2CB-ANR - 120MHz Cortex-M4 MCU 128KB Flash | Microchip
부품 번호: ATSAM4S2CB-ANR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.2 | $5.20 |
| 10 | $4.68 | $46.80 |
| 100 | $4.1 | $410.00 |
| 500 | $3.65 | $1,825.00 |
| 1,000 | $3.2 | $3,200.00 |
ATSAM4S2CB-ANR 개요
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, sitting within the broader hierarchy of embedded processors: Cortex-M4 core -> ARM RISC MCU -> system-on-chip -> embedded control system. MCUs are the workhorses of industrial control, consumer devices, and IoT nodes, where deterministic real-time behavior and low power matter more than raw throughput.
Key features of the ATSAM4S2CB-ANR include the Cortex-M4 core with hardware FPU-free DSP instructions (single-cycle MAC, SIMD), a full-speed USB Device port with embedded transceiver, supply operation from 1.62V to 3.6V, and low active power consumption cited by Microchip at approximately 180 uA per MHz. The device operates across the industrial temperature range with gull-wing terminals on a square LFQFP body.
Technically, the SAM4S series implements a three-stage Harvard pipeline with an ARMv7E-M architecture, optional cache, and dual-bank flash implementation across the family (up to 2048 KB on larger variants), enabling safe in-application firmware updates. The peripheral set includes USART, SPI, TWI (I2C), PWM channels, a 12-bit ADC, and a hardware AES/GHASH cryptographic engine on select family members, allowing the same board design to scale flash density from 128 KB to 2 MB without PCB changes.
Typical applications include industrial automation and motor control nodes, consumer and appliance interfaces, USB-equipped instrumentation and sensor bridges, and low-power embedded systems that need Cortex-M4 DSP performance with a long-lived, pin-compatible upgrade path.
When designing with this part, note that at 120 MHz flash wait states are significant, so performance-critical code should be relocated to SRAM or the flash cache enabled; also plan VDDCORE and VDDIO decoupling per the datasheet.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single verified reference point.
드롭인 대체품: ATSAM4S2CB-ANR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAM4S2CB-ANR (동일 폼 팩터 및 풋프린트) — 차이점: Core Processor, Package, Operating Temperature, Packaging, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAM4S4CB-ANR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATSAM4S8CB-ANR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATSAM4S16CB-ANR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATSAM4S2CA-ANR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATSAM4S2CB-AU
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATSAM4S2CB-ANR 최대 정격 & 전기적 특성
| Core Processor | ARM Cortex-M4 (32-bit RISC) |
| Core Architecture | ARMv7E-M Harvard, 3-stage pipeline |
| 최대 클록 주파수 | 120 MHz |
| Flash Memory | 128 KB (128K x 8) |
| SRAM | 64 KB |
| 공급 전압 | 1.62 V to 3.6 V |
| Core Voltage | 1.2 V |
| Power Consumption | 180 uA/MHz (typical, per Microchip) |
| USB | Full-speed USB Device port with embedded transceiver |
| Number of I/O | Up to 79 programmable I/O lines |
| 동작 온도 | -40C to +85C (industrial grade) |
| 패키지 | 100-LQFP (14x14 mm), gull-wing, square LFQFP |
| 실장 유형 | Surface Mount |
| Terminal Form | Gull Wing |
| Packaging | Tape & Reel (suffix NR) |
| Flash Family Range | Up to 2048 KB within SAM4S family, dual-bank with cache |
| RoHS 상태 | RoHS compliant (green package per Mouser listing) |
ATSAM4S2CB-ANR 100-lqfp (14x14 mm), gull-wing, square lfqfp 핀 구성 가이드
ATSAM4S2CB-ANR(100-lqfp (14x14 mm), gull-wing, square lfqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAM4S2CB-ANR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAM4S2CB-ANR 적합 용도: 6 애플리케이션s: Industrial Automation and Control Nodes, USB-Equipped Instrumentation and Test Devices, Consumer Appliance Interfaces and HMI, Low-Power Embedded and IoT Sensor Nodes, Motor Control and Power Conversion Subsystems, Networking Accessories and Embedded Gateways.
Industrial Automation and Control Nodes
The ATSAM4S2CB-ANR fits industrial automation nodes because its 120 MHz Cortex-M4 core provides deterministic real-time response, DSP MAC instructions accelerate control-loop math (PID, filters), and the industrial -40C to +85C grade survives factory-floor temperature extremes. In a typical node it reads sensors via its TWI/SPI/USART peripherals, executes control logic, and communicates with a PLC or gateway over RS-485 via a transceiver. Operating from a 3.3V rail with 180 uA/MHz active consumption, it keeps cabinet thermal budgets low, and its 128 KB flash supports robust application code with bootloader-based field updates.
추천
USB-Equipped Instrumentation and Test Devices
The embedded full-speed USB Device transceiver is the decisive advantage here: the ATSAM4S2CB-ANR implements USB 2.0 full-speed (12 Mbps) device roles - virtual COM ports, HID panels, and data-acquisition bridges - without an external PHY, reducing BOM cost and board area in handheld instruments and lab peripherals. The 120 MHz core sustains USB stack overhead plus signal processing (fixed-point DSP via single-cycle MAC), while 64 KB SRAM buffers acquisition samples between USB transfers. Its industrial temperature grade and 1.62V-3.6V operation from a single 3.3V rail simplify battery and bench-instrument power designs.
추천
Consumer Appliance Interfaces and HMI
For appliance user interfaces - touch buttons, segment or small TFT displays, and motor or valve control - the ATSAM4S2CB-ANR combines PWM peripherals for backlight and buzzer control, ADC inputs for touch or sensor sensing, and enough Cortex-M4 headroom at 120 MHz to drive HMI logic and communication simultaneously. Green-package RoHS compliance supports consumer regulatory requirements, and the 128 KB flash comfortably holds UI frameworks and localized string tables. Designers value the pin-compatible SAM4S ladder: if a feature update needs more code space, migrating to 512 KB or 1 MB variants requires no PCB respin.
추천
Low-Power Embedded and IoT Sensor Nodes
Microchip's SAM4S2C page highlights 180 uA/MHz power consumption, which - combined with the family's power-management and sleep modes detailed in the datasheet - makes the ATSAM4S2CB-ANR practical for mains-adjacent and duty-cycled battery IoT nodes. Estimated: at 3.3V and an average 25% duty cycle at 120 MHz, average current is roughly 5-6 mA, feasible for a year on a 3000 mAh cell with deeper sleep between samples. On-chip 12-bit ADC, TWI and USART peripherals connect common MEMS sensors and radios, while 64 KB SRAM holds buffering and lightweight protocol stacks for sub-GHz or BLE companion modules.
추천
Motor Control and Power Conversion Subsystems
The SAM4S peripheral set - PWM channels, 12-bit ADC, and general-purpose timers with capture/compare - supports BLDC, stepper, and low-complexity AC motor control. The Cortex-M4's single-cycle MAC executes Clarke/Park transforms and PI loops in fixed-point arithmetic at 120 MHz, comfortably closing current loops in the tens-of-kilohertz range. In a drive board the ATSAM4S2CB-ANR typically sequences a gate-driver IC such as a half-bridge driver, samples shunt currents through the ADC, and communicates status over USART or CAN-adjacent links. Its industrial grade suits motor-driven appliances, pumps, fans, and factory automation actuators.
추천
Networking Accessories and Embedded Gateways
For accessories such as networked sensors, serial-to-Ethernet bridges, and small gateways, the ATSAM4S2CB-ANR provides multiple USARTs, SPI and TWI buses to link PHYs and external MACs, plus USB device for local configuration. The 120 MHz Cortex-M4 with cache-capable flash architecture from the SAM4S datasheet sustains lightweight TCP/IP stacks and protocol translation between RS-232/RS-485 field devices and upstream IP networks. Green RoHS LQFP packaging with gull-wing terminals supports standard SMT assembly for networking hardware volumes, and the 1.62V-3.6V supply integrates cleanly with common PoE-derived or 3.3V rail designs.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAM4S2CB-ANR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAM4S4CB-ANR | ATSAM4S8CB-ANR | ATSAM4S16CB-ANR | ATSAM4S2CA-ANR |
|---|---|---|---|---|---|
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Max Speed | ARM Cortex-M4, 120 MHz | ARM Cortex-M4, 120 MHz | ARM Cortex-M4, 120 MHz | ARM Cortex-M4, 120 MHz | ARM Cortex-M4, 120 MHz |
| Flash Memory | 128 KB | 256 KB | 512 KB | 1 MB | 128 KB |
| Supply Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Temperature Grade | Industrial (-40C to +85C) | Industrial | Industrial | Industrial | Industrial |
| Packaging | Tape & Reel (NR suffix) | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel |
주요 차별점
- Smallest flash SAM4S variant in the 100-LQFP CB footprint (vs ATSAM4S4CB-ANR)
- Full-speed USB device with embedded transceiver (vs ATSAM4N16CA-CFUR)
- Cost-optimized 64 KB SRAM / 128 KB flash balance (vs ATSAM4S16CB-ANR)
설계 노트
Power the ATSAM4S2CB-ANR from a regulated 3.3V rail within the 1.62V-3.6V range. Per the SAM4S datasheet, the device requires a 1.2V VDDCORE domain, typically generated by the on-chip regulator or supplied externally per the datasheet's power-supply options chapter - do not leave this configuration ambiguous at schematic review. Decouple each VDDIO pin pair with 100 nF ceramic capacitors placed within 2 mm, plus bulk 10 uF per supply domain. Estimated: at full 120 MHz active operation (~21.6 mA at 180 uA/MHz, 3.3V) core-plus-clock power is about 71 mW before peripheral and I/O loads.
At 120 MHz, flash access introduces wait states; if performance-critical routines (DSP, control loops) run from flash without cache benefits, effective throughput drops noticeably. Relocate hot code to SRAM or ensure the SAM4S flash cache is enabled and sequential code access is optimized. Another common pitfall: SAM4S parts do NOT include a hardware FPU - software floating point at 120 MHz is many cycles per operation, so use fixed-point math (Q15/Q31) to exploit the single-cycle MAC instead.
Use the 100-LQFP (14x14 mm) footprint with gull-wing pads per IPC-7351 recommendations and place a via-stitched ground plane directly under the die. Route the USB D+/D- pair as a 90-ohm differential pair with matched length, keeping stubs under 5 mm; the embedded transceiver tolerates modest routing but not long mismatched traces. Provide a 10-pin SWD header (SWDIO/SWCLK + NRST) for programming and debug - omitting it forces costly ISP recovery via the UART boot path when flash is locked.
Thermal design is straightforward: Estimated worst-case dissipation with all peripherals active is on the order of 100-150 mV-scale currents at 3.3V, i.e. well under 0.5 W, and the 100-LQFP theta_JA on a standard four-layer board keeps junction rise below ~20C - no heatsink or copper pour beyond the standard ground plane is needed. Verify with the datasheet theta_JA table if your board is two-layer or enclosed, and confirm ambient stays within the industrial -40C to +85C rating including self-heating.
규정 준수 정보
Mouser lists the package as 'LQFP,GREEN,IND TEMP,MRL' indicating a green (RoHS) industrial-temperature package. REACH, halogen-free, and conflict-minerals status not stated in provided data - verify via Microchip's product compliance portal.
