Microchip Technology

ATSAMD20E18A-MN - 48MHz Cortex-M0+ 256KB MCU | Microchip

부품 번호: ATSAMD20E18A-MN ✓ 활성
1.6 V to 3.6 V Vdss 32-VQFN, 5 mm x 5 mm Package 48 MHz Speed 256 KB Memory
MOQ: 1 |

ATSAMD20E18A-MN 개요

The Microchip Technology ATSAMD20E18A-MN is a 32-bit ARM Cortex-M0+ microcontroller operating up to 48 MHz, with 256 KB of flash memory and 32 KB of SRAM in a 32-VQFN 5 x 5 mm package. It operates from 1.6 V to 3.6 V and combines a low-power embedded processing core with mixed-signal and connectivity-oriented peripherals.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals such as serial interfaces, timers, analog converters, and communication blocks on one device. The SAM D20 family belongs to the embedded microcontroller hierarchy: MCU, embedded controller, processor, and semiconductor. This integration reduces component count in compact consumer, home-automation, metering, and industrial control products.

The ATSAMD20E18A-MN provides 256 KB of flash for firmware and 32 KB of SRAM for working memory. Its listed mixed-signal resources include a 12-bit ADC, a 10-bit DAC, a 256-channel PTC peripheral, and a real-time clock. These functions support applications that need both digital control and local analog measurement, signal generation, or timekeeping.

The ARM Cortex-M0+ architecture provides a 32-bit processing interface while retaining the resource-efficient design characteristics associated with embedded systems. Operation up to 48 MHz gives the device adequate performance for peripheral control, protocol handling, and compact automation logic. A 1.6 V to 3.6 V operating range permits integration with low-voltage embedded power rails, although each external interface and peripheral must remain within its specified limits.

Typical uses include home-automation controllers, smart energy meters, consumer appliances, building equipment, sensor nodes, and industrial monitoring systems. The ATSAMD20E18A-MN is particularly appropriate where 256 KB of flash is sufficient, local analog conversion is valuable, and a compact 32-VQFN package reduces board area compared with larger leaded or higher-pin-count packages.

Designers should use the manufacturer pin-description table when assigning tracks because the exposed-pad and power-routing requirements of a 32-VQFN device must be followed exactly. Place decoupling capacitors close to the supply pins, connect all required ground returns to the exposed pad according to the recommended land pattern, and verify signal levels and peripheral multiplexing against the device documentation.

This page combines the exact orderable MPN, package and memory details, sourcing information, engineering guidance, and a distinction between electrically similar MCU options. It also identifies where replacement decisions require confirmation of pinout, peripheral configuration, temperature grade, and package suffix rather than relying only on a matching flash size.

드롭인 대체품: ATSAMD20E18A-MN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMD20E18A-MN (동일 폼 팩터 및 풋프린트) — 차이점: Operating Voltage Range, Package, RoHS Status, SRAM.

Microchip Technology
Operating Voltage Range: 1.62 V to 3.6 V
Package: 32-pin VQFN (5x5 mm) with exposed pad
RoHS Status: Compliant
비교 대상: ATSAMD20E18A-MN →

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

ATSAMD20E18A-MN 최대 정격 & 전기적 특성

Product Type 32-bit embedded microcontroller
CPU Architecture ARM Cortex-M0+
최대 클록 주파수 48 MHz
Flash Memory 256 KB
Flash Organization 256K x 8 bits
SRAM 32 KB
Operating Voltage Range 1.6 V to 3.6 V
ADC Resolution 12 bits
DAC Resolution 10 bits
PTC Channel Count 256 channels
Real-Time Clock Yes
Core Count 1 core
패키지 32-VQFN, 5 mm x 5 mm
실장 유형 Surface mount
Maximum Operating Temperature 105 °C
Green Compliance Green
RoHS 상태 RoHS3 compliant

ATSAMD20E18A-MN 32-vqfn, 5 mm x 5 mm 핀 구성 가이드

ATSAMD20E18A-MN(32-vqfn, 5 mm x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATSAMD20E18A-MN의 32-vqfn, 5 mm x 5 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATSAMD20E18A-MN.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATSAMD20E18A-MN 적합 용도: 6 애플리케이션s: Smart Home Automation Controller, Smart Energy Metering, Industrial Sensor and Condition Monitoring, Consumer Appliance Control, LED Lighting and Display Control, Data Acquisition and Embedded Control.

🧩

Smart Home Automation Controller

The ATSAMD20E18A-MN fits compact home-automation controllers that coordinate sensors, relay outputs, user interfaces, and low-power serial peripherals. Its 48 MHz ARM Cortex-M0+ core provides sufficient control bandwidth for protocol handling and state-machine logic, while 256 KB of flash accommodates application firmware and configuration data. The 32 KB of SRAM supports communication buffers and real-time control state. A 32-VQFN 5 mm by 5 mm package also reduces board area. The design must follow the manufacturer land pattern and keep decoupling close to the supply pins.

⚡

Smart Energy Metering

The ATSAMD20E18A-MN is suitable for metering designs that combine pulse or sensor inputs with local computation and communications. Its 12-bit ADC supports measurements from suitable analog front ends, while the 48 MHz Cortex-M0+ core can process sampled data, maintain counters, and execute communication routines. The 256 KB of flash stores firmware and calibration parameters, and 32 KB of SRAM provides working space for measurement buffers. The 1.6 V to 3.6 V operating range supports low-voltage embedded platforms, although the front end must be sized for the required accuracy and dynamic range.

🏭

Industrial Sensor and Condition Monitoring

The ATSAMD20E18A-MN supports industrial sensor nodes that periodically acquire measurements, evaluate thresholds, and report system condition. The Cortex-M0+ core provides deterministic control at up to 48 MHz, and the 256 KB flash capacity is useful for local algorithms and diagnostic data structures. The listed 12-bit ADC and 256-channel PTC resources can simplify temperature and analog monitoring designs. Its 105 °C maximum operating temperature supports elevated industrial environments, but system-level thermal verification, sensor accuracy checks, and transient protection remain necessary.

📱

Consumer Appliance Control

The ATSAMD20E18A-MN is appropriate for compact consumer appliances that coordinate buttons, displays, motor-control signals, and communication interfaces. Its 48 MHz core provides enough performance for layered control software, while 256 KB of flash and 32 KB of SRAM fit typical embedded workloads without external memory. The 10-bit DAC can support basic analog output or signal generation where its performance is adequate. The compact 32-VQFN footprint saves board area, although exposed-pad land-pattern compliance and adequate local decoupling are critical for reliable assembly and thermal performance.

💡

LED Lighting and Display Control

The ATSAMD20E18A-MN can act as the central controller in LED lighting, signage, or compact display products. Its PWM-capable peripherals and 48 MHz processing support timing-based dimming, animation, fault handling, and communications, while the microcontroller handles local button input and status feedback. The 256 KB flash capacity allows display patterns and control logic to reside locally. The 10-bit DAC provides a basic analog output, although the specific LED driver topology should be selected for current, dimming resolution, dimming-method, and protection requirements.

🖥️

Data Acquisition and Embedded Control

The ATSAMD20E18A-MN works well as a compact embedded control node for acquiring analog signals and coordinating other system functions. Its 12-bit ADC handles suitable low- to moderate-resolution measurements, while the Cortex-M0+ core at up to 48 MHz can execute calibration, filtering, logging, and protocol logic. Firmware fits within 256 KB of flash and application state within 32 KB of SRAM. Designers should select external analog components according to the required bandwidth and precision, and use the manufacturer ADC guidance for source impedance, sampling time, reference stability, and calibration.

What are the key specifications of ATSAMD20E18A-MN that engineers should know?
The ATSAMD20E18A-MN is a 32-bit ARM Cortex-M0+ microcontroller with a maximum clock frequency of 48 MHz, 256 KB of flash memory, and 32 KB of SRAM. According to the Microchip ATSAMD20E18 product page, it also includes a 12-bit ADC, a 10-bit DAC, a 256-channel PTC peripheral, and a real-time clock. The device operates from 1.6 V to 3.6 V and is offered in a 32-VQFN package measuring 5 mm by 5 mm.
What is ATSAMD20E18A-MN and what is it used for?
The ATSAMD20E18A-MN is a low-power, 32-bit ARM Cortex-M0+ embedded microcontroller from Microchip Technology. It combines a 48 MHz processor, 256 KB of flash, and 32 KB of SRAM with analog and timing peripherals. According to the manufacturer product page, the SAM D20 family targets home automation, consumer, metering, and industrial applications, including designs that require local sensing, control, communications, and compact packaged implementations.
Where can I download the ATSAMD20E18A-MN datasheet PDF?
The ATSAMD20E18A-MN datasheet and supporting product information are available through the official Microchip ATSAMD20E18 product page at https://www.microchip.com/en-us/product/ATSAMD20E18. The device documentation includes family-level technical information, package details, electrical characteristics, and pin information. Use the ordering information on that page to confirm that ATSAMD20E18A-MN is the required 32-VQFN, 105 °C orderable configuration.
Where can I find the ATSAMD20E18A-MN pinout and package drawing?
The ATSAMD20E18A-MN pinout, package dimensions, and recommended land pattern are documented in the Microchip ATSAMD20E18 family documentation. The device uses a 32-VQFN package with a 5 mm by 5 mm body. Because package suffix codes can change the shipping method without changing the electrical device, verify the exact MN marking and exposed-pad connection against the manufacturer pin-description table before assigning PCB tracks.
How much flash memory and SRAM does ATSAMD20E18A-MN have?
The ATSAMD20E18A-MN contains 256 KB of flash memory and 32 KB of SRAM. According to the Microchip product-page data, the flash is organized as 256K by 8 bits. This memory capacity supports embedded firmware, configuration data, protocol handlers, and control logic while retaining SRAM for working state, stack operations, buffers, and peripheral data handling.
What is the operating voltage range of ATSAMD20E18A-MN?
The ATSAMD20E18A-MN operates across a 1.6 V to 3.6 V range. The Microchip product-page information identifies this supply range for the device, while the manufacturer family documentation should be consulted for the exact core, analog, and I/O voltage limits associated with each operating mode. Designers should also ensure that every connected peripheral and pull network remains compatible with the selected supply voltage.
Where can I buy ATSAMD20E18A-MN online?
The ATSAMD20E18A-MN can be requested through the Request a Quote form on this product page. The form supports exact-MPN sourcing and helps the purchasing team confirm current availability, minimum order quantity, delivery timing, and the required package or shipping configuration. Use ATSAMD20E18A-MN as the quoted manufacturer part number to avoid confusion with base-family or temperature-grade variants.
What is the price of ATSAMD20E18A-MN?
Use the Request a Quote form on this page for the current ATSAMD20E18A-MN commercial quotation. The structured pricing area reflects the exact orderable MPN and can change with quantity, supply, and market conditions. For engineering budgets, review the product specifications separately and request a quantity-specific quote before authorizing procurement or comparing landed cost against alternatives.
What is the lead time and stock status for ATSAMD20E18A-MN?
Request the current lead time and stock allocation through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, package configuration, and purchasing conditions. The exact manufacturer part number ATSAMD20E18A-MN should appear on the quotation so that any allocation, shipment method, or delivery estimate applies to the intended orderable device.
What is the difference between ATSAMD20E18A-MN and ATSAMD21E18A-MF?
Both parts are listed with an ARM Cortex-M0+ core, 32-bit processing, 256 KB of flash, and a 32-QFN package, but their peripheral sets and ordering configurations are not established as identical. The published comparison identifies ATSAMD21E18A-MF as the alternative, while ATSAMD20E18A-MN is specified as a 105 °C device operating from 1.6 V to 3.6 V. Confirm pin functions and muxing before treating one as a replacement for the other.
When should I choose ATSAMD20E18A-MN over another Cortex-M0+ MCU?
Choose ATSAMD20E18A-MN when the design needs a 48 MHz Cortex-M0+ core, 256 KB of flash, 32 KB of SRAM, a 12-bit ADC, and a 10-bit DAC in a compact 32-VQFN package. Its 1.6 V to 3.6 V operating range and 105 °C maximum temperature also support constrained embedded systems. Select another MCU when its pin muxing, communication peripherals, regulator arrangement, or package provides a more direct fit.
Is ATSAMD20E18A-MN suitable for home automation and smart metering products?
The ATSAMD20E18A-MN is suitable for many home-automation, consumer, metering, and industrial-control applications. Its 48 MHz Cortex-M0+ core handles embedded control tasks, while 256 KB of flash and 32 KB of SRAM provide local firmware and working memory. The 12-bit ADC supports analog measurement, and the RTC and other listed peripherals can reduce the need for separate support components in a compact board design.
What can replace ATSAMD20E18A-MN without changing the PCB?
A PCB-compatible replacement must match the 32-VQFN footprint, pin functions, voltage limits, memory arrangement, peripheral multiplexing, and thermal requirements. The ATSAMD20E18A-MU is an exact-family ordering option, but its suffix indicates a different packaging configuration and it should not be selected solely because its base MPN resembles the target. Treat ATSAMD21E18A-MF as a comparison candidate until pin-level compatibility is confirmed.
Is ATSAMD20E18A-MN the same as ATSAMD20E18A-MU?
The ATSAMD20E18A-MN and ATSAMD20E18A-MU belong to the same ATSAMD20E18A family, but their complete ordering codes are not interchangeable without checking the suffix definition. Both identify 256 KB flash SAM D20E devices in the 32-VQFN configuration, while the final suffix can distinguish shipping or qualification characteristics. Use the manufacturer ordering table to confirm the exact grade and package option required for the target PCB.
Is ATSAMD20E18A-MN RoHS compliant?
The ATSAMD20E18A-MN is identified as RoHS3 compliant and green in its published product listing. It is also marked with a maximum operating temperature of 105 °C. RoHS status addresses restricted substances in the product, while the operating temperature rating is an electrical and environmental limit; compliance does not itself guarantee suitability for every industrial or automotive qualification requirement.

엔지니어링 참조 데이터: ATSAMD20E18A-MN — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ATSAMD20E18A-MN for a compact embedded design that needs a 48 MHz ARM Cortex-M0+ core, 256 KB of flash, 32 KB of SRAM, a 12-bit ADC, and a 10-bit DAC within a 32-VQFN footprint. Its 1.6 V to 3.6 V range and 105 °C maximum temperature make it relevant to industrial, metering, appliance, and automation products. ATSAMD21E18A-MF may be considered when its SAM D21 peripheral set offers a functional benefit, but matching package size and flash memory does not establish pin compatibility. ATSAMD20E18A-MU is an exact-family ordering option with a different suffix; verify its qualification and shipping format before using it. For any alternative, compare pin muxing, exposed-pad requirements, ADC characteristics, communication peripherals, memory organization, supply limits, and temperature grade against the target design.

대체품과의 비교

파라미터 이 제품
Brand Microchip Technology
Package 32-VQFN, 5 mm x 5 mm
CPU Architecture ARM Cortex-M0+
Maximum Clock Frequency 48 MHz
Flash Memory 256 KB
SRAM 32 KB
Operating Voltage Range 1.6 V to 3.6 V
ADC Resolution 12 bits
DAC Resolution 10 bits
Maximum Operating Temperature 105 °C

주요 차별점

  • Compact mixed-signal capability in a 32-QFN package (vs ATSAMD21E18A-MF)
  • High-temperature configuration for industrial environments (vs ATSAMD21E18A-MF)
  • Low-voltage operating range (vs ATSAMD21E18A-MF)

설계 노트

Use the manufacturer land pattern for the 32-VQFN 5 mm by 5 mm package, including the exposed thermal pad. Place input, output, and reference decoupling capacitors close to their corresponding pins, and provide a low-impedance ground connection to the exposed pad. Confirm pad dimensions and solder-mask details against the current package drawing rather than scaling them from a generic QFN footprint.

Design the 1.6 V to 3.6 V supply rail so that its voltage stays within the limits specified for every operating mode and peripheral. Account for startup current, analog-reference loading, external-interface loads, and regulator transient response when sizing the supply. Keep sensitive analog and digital return paths appropriately separated while maintaining a common low-impedance ground reference according to the recommended layout.

Follow the ADC source-impedance, acquisition-time, and reference requirements from the family documentation. If the selected sensor output has high source impedance, add an appropriate buffer rather than relying on the sample-and-hold input alone. Likewise, route external communication and debug signals away from sensitive analog nodes, use controlled edge rates where needed, and avoid long traces adjacent to high-speed switching nodes.

Do not select a replacement solely from CPU speed and flash capacity. Check the exact pin functions, peripheral instance mapping, package dimensions, exposed-pad connection, temperature grade, and ordering suffix. ATSAMD20E18A-MU belongs to the same family but represents a different ordering suffix, while ATSAMD21E18A-MF has a different family designation; neither should be treated as drop-in without a formal pin and electrical comparison.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product listing identifies the device as RoHS3 compliant and green. No explicit REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for this exact orderable MPN.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ATSAMD20E18A-MN datasheet ATSAMD20E18A-MN pinout ATSAMD20E18A-MN datasheet pdf ATSAMD20E18A-MN specifications ATSAMD20E18A-MN 32 VQFN ATSAMD20E18A-MN equivalent ATSAMD20E18A-MN replacement ATSAMD20E18A-MN price ATSAMD20E18A-MN stock ATSAMD20E18A-MN vs ATSAMD21E18A-MF Microchip ATSAMD20E18A-MN ATSAMD20E18A-MN home automation ATSAMD20E18 48MHz Cortex-M0+ ATSAMD20E18A-MN footprint

관련 부품 & 용어

Microchip Technology ATSAMD20E18A-MN ATSAMD20E18 ATSAMD20E18A-MU ATSAMD21E18A-MF ARM Cortex-M0+ embedded microcontroller system-on-chip flash memory static RAM 32-VQFN QFN family surface-mount package 12-bit ADC 10-bit DAC 256-channel PTC real-time clock home automation smart metering industrial sensor monitoring consumer appliance control LED lighting control data acquisition 1.6 V to 3.6 V 48 MHz
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기