ATSAMD21J18A-MU - 48MHz Cortex-M0+ MCU | Microchip Technology
부품 번호: ATSAMD21J18A-MU ✓ 활성ATSAMD21J18A-MU 개요
An Arm Cortex-M0+ microcontroller is a 32-bit embedded processor within the broader hierarchy of embedded processor → microcontroller → semiconductor. The Cortex-M0+ architecture combines a compact instruction set with efficient event-based operation, making it suitable for embedded control systems that must monitor inputs, operate peripherals, and respond to external events while keeping energy use low.
The ATSAMD21J18A-MU provides 256 KB of flash for firmware, 32 KB of SRAM for working data, and operation from 1.6 V to 3.6 V. Its integrated 10-bit and 12-bit conversion capabilities support analog measurement tasks, while PWM resources support motor, lighting, and power-conversion control. A maximum clock frequency of 48 MHz gives designers sufficient processing performance for protocol handling, supervisory logic, and embedded control without moving to a higher-complexity processor.
The part belongs to Microchip's SAM D21 family, where SAM D21 describes the device family and ATSAMD21J18A identifies the specific 64-pin controller configuration. The -MU ordering suffix corresponds to the 64-QFN package and the stated temperature grade option. This device is identified as a functional-safety-capable member in distributor and manufacturer-family documentation, while individual safety certification details should be confirmed for the final system design.
Typical applications include smart-home sensor nodes, utility and resource meters, industrial control modules, consumer appliances, and compact embedded control boards. Its combination of flash, SRAM, analog conversion, PWM, and low-voltage operation allows a single device to supervise a sensor interface, run application firmware, and control actuator outputs. A SWD programming interface supports programming and debugging through the family's established development ecosystem.
Layout should prioritize a short, continuous ground plane beneath the device and place decoupling capacitors close to the corresponding supply pins. Use the manufacturer pin-description table and package drawing to assign every 64-QFN terminal, and verify exposed-pad connection and thermal-layout requirements before fabrication. Validate operating conditions across voltage, temperature, peripheral load, and the worst-case clock configuration used by the product.
This page consolidates the manufacturer's family positioning, exact MPN specifications, price breaks, source links, and a practical replacement assessment. The cross-reference review also distinguishes a comparable 64-QFN microcontroller from a confirmed drop-in replacement, helping designers avoid assuming that matching package size and flash density guarantee peripheral or pin compatibility.
드롭인 대체품: ATSAMD21J18A-MU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMD21J18A-MU (동일 폼 팩터 및 풋프린트) — 차이점: DAC, Package, SRAM, ADC, Operating Temperature.
EFM32WG940F256-QFN64T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATSAMD21J18A-MU 최대 정격 & 전기적 특성
| Architecture | 32-bit Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| Programmable I/O Count | 52 I/O |
| Operating Voltage Range | 1.6 V to 3.6 V |
| ADC Resolution | 10-bit and 12-bit |
| 패키지 | 64-QFN, 9 mm × 9 mm |
| 실장 유형 | Surface mount |
| Device Family | SAM D21J |
| Safety Positioning | Functional Safety (FuSa) microcontroller |
| Architecture Family | Arm Cortex-M0+ |
| Flash Organization | 256K × 8 bits |
| External Interrupt Count | 28 interrupts |
| Debug Interface | SWD |
ATSAMD21J18A-MU 64-qfn, 9 mm × 9 mm 핀 구성 가이드
ATSAMD21J18A-MU(64-qfn, 9 mm × 9 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAMD21J18A-MU.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAMD21J18A-MU 적합 용도: 6 애플리케이션s: Smart Home Sensor Nodes, Utility Metering, Home Automation Control, Industrial Control Modules, Consumer Appliance Controls, Motor and PWM Control.
Smart Home Sensor Nodes
The ATSAMD21J18A-MU fits compact smart-home nodes that combine sensing, local logic, and communications. Its 32-bit Cortex-M0+ core can handle event-driven control at up to 48 MHz, while 256 KB flash and 32 KB SRAM provide room for protocol stacks and application firmware. The 1.6 V to 3.6 V operating range supports low-energy sensor assemblies, and the 52 available I/O can connect switches, indicators, and peripheral sensors. Use the analog-conversion resources for suitable analog inputs, but verify each signal’s bandwidth and accuracy requirement against the datasheet.
추천
Utility Metering
The ATSAMD21J18A-MU is suitable for metering controllers that must acquire measurements, maintain operating state, and calculate or transmit consumption data. Its 256 KB flash supports a larger embedded application than a minimal controller, while 32 KB SRAM accommodates working buffers and communication state. The 10-bit and 12-bit conversion capabilities provide options for compatible analog measurements, and the 48 MHz Cortex-M0+ core supports responsive supervisory control. Meter designs should separately validate accuracy, drift, calibration, and safety requirements for the final measurement class.
추천
Home Automation Control
The ATSAMD21J18A-MU can act as the central controller in a home-automation relay or sensor-hub design. Its 52 I/O provide substantial host capability for digital inputs, outputs, and control signals, while PWM resources support suitable loads such as lighting or simple actuators. The low-voltage operating range and 64-QFN package help reduce board area, and the 48 MHz core is appropriate for debounce logic, state management, and communication tasks. Power-driving transistors, isolation, and protection components must be selected separately from the controller.
추천
Industrial Control Modules
The ATSAMD21J18A-MU fits distributed industrial control modules that monitor inputs and operate actuators through a compact embedded processor. The Arm Cortex-M0+ architecture provides 32-bit control at up to 48 MHz, and 256 KB flash and 32 KB SRAM support protocol handling, diagnostics, and application logic. Its analog conversion capability can serve compatible sensor interfaces, while PWM assists motor, valve, or power-control functions when their electrical requirements are supported. Industrial qualification and operating-temperature limits must be checked against the production grade and enclosure requirements.
추천
Consumer Appliance Controls
The ATSAMD21J18A-MU is appropriate for consumer appliances requiring coordinated user inputs, motor or valve control, and embedded product logic. Its 48 MHz Cortex-M0+ core supports responsive control loops and user-interface handling, and its 256 KB flash accommodates application firmware without requiring a separate memory device. The 64-QFN package supports compact board layouts, while 52 I/O and PWM provide resources for switches, sensors, indicators, and actuators. Validate EMC, temperature, safety, and appliance-specific load requirements at the system level.
추천
Motor and PWM Control
The ATSAMD21J18A-MU can control compatible PWM-driven actuators because it combines a 48 MHz control core with PWM resources and a generous set of I/O. The 32-bit architecture supports more precise timing and supervisory calculations than an 8-bit design, while 256 KB flash provides room for motion profiles, fault handling, and communications. The MCU should drive low-power stages through appropriate transistor, gate-driver, or motor-driver circuitry rather than powering loads directly. Verify PWM frequency, edge behavior, fault response, and current limits against the selected actuator and its driver.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMD21J18A-MU — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EFM32WG940F256-QFN64T |
|---|---|---|
| Brand | Microchip Technology | Silicon Labs |
| Package | 64-QFN, 9 mm × 9 mm | 64-QFN |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M4 |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Memory | 256 KB | 256 KB |
주요 차별점
- Functional-safety-oriented device positioning (vs EFM32WG940F256-QFN64T)
- Exact SAM D21J family integration (vs EFM32WG940F256-QFN64T)
- Documented low-voltage operating range (vs EFM32WG940F256-QFN64T)
설계 노트
Follow the manufacturer 64-QFN land pattern and verify the exposed-pad treatment against the package drawing. Place each decoupling capacitor directly beside its associated power pin, use a continuous ground reference beneath the device where the layout rules permit, and keep high-current or fast-switching return paths away from sensitive analog inputs. The QFN package has no large through-hole leads, so paste design, stencil aperture selection, and reflow-profile validation are critical to reliable assembly.
Design the 1.6 V to 3.6 V supply path so the regulator can support the selected clock frequency, analog conversion activity, and external I/O loading. Include local bulk and high-frequency decoupling at the controller, and confirm the startup behavior of all connected loads. Do not infer the maximum total current from the 48 MHz clock rating; use the manufacturer's electrical-characteristics limits and account for temperature-dependent supply requirements.
Separate analog inputs from digital switching paths and return the analog ground reference carefully according to the manufacturer recommendations. Keep the SWD programming interface accessible without introducing long signal paths beside sensitive measurement inputs. Before release, compare every PCB symbol and pad with the exact manufacturer pin-description table and confirm that exposed-pad, power, reset, and debug functions have not been assigned incorrectly.
Matching a 64-QFN package and equal flash density does not establish drop-in interchangeability. The EFM32WG940F256-QFN64T comparison requires verification of pin functions, exposed-pad voltage, peripheral mapping, clock-tree differences, interrupt assignments, and programming requirements. Likewise, ATSAMD21J18A-MUT is an alternate packing designation for the same architecture rather than a distinct functional substitute. Use an approved component-change process before either change is released for production.
규정 준수 정보
The device is identified as a Functional Safety (FuSa) microcontroller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is present in the referenced product and distributor information.