ATSAMDA1J14B-MBT - 48MHz Cortex-M0+ MCU, 16KB Flash | Microchip
부품 번호: ATSAMDA1J14B-MBT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.15 | $4.15 |
| 10 | $3.74 | $37.40 |
| 100 | $3.21 | $321.00 |
| 500 | $2.85 | $1,425.00 |
| 1,000 | $2.55 | $2,550.00 |
ATSAMDA1J14B-MBT 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. The Cortex-M0+ architecture targets ultra-low-power, deterministic embedded control; the SAM DA1 family sits in Microchip's hierarchy as SAM (Smart ARM MCU) -> ARM Cortex-M microcontroller -> Microcontroller -> Embedded MCU -> semiconductor IC. Functional-Safety (FuSa) variants add diagnostic libraries and lockstep-ready hardware features to support safety standards.
Key features include six SERCOM serial communication modules that can each be configured as USART, I2C, or SPI; a 12-bit ADC with up to 20 channels and hardware oversampling; a 16-bit PWM controller with complementary outputs and dead-time insertion for power conversion; integrated op-amps, comparators, and a 10-bit DAC; a Full-Speed USB device interface; and an Event System that allows peripherals to interact without CPU intervention. The Cortex-M0+ core delivers 45 DMIPS at 48 MHz while maintaining an exceptionally low active current.
The SAM DA1 architecture combines the energy-efficient Cortex-M0+ core with Atmel/Microchip's proprietary peripheral set, enabling deterministic interrupt latency and low-power sleep modes (IDLE, STANDBY, BACKUP) down to a few microamps. Hardware AES, True Random Number Generator (TRNG), and unique 128-bit serial number support secure-boot and firmware authentication workflows often required in connected appliances and metering products.
Typical applications include smart appliances and white goods, industrial sensor nodes, BLDC and stepper motor control, LED lighting and human-machine interfaces, building automation, and low-power IoT edge nodes. The combination of Analog, PWM, and FuSa diagnostics also makes it suitable for medical devices and Class B safety-critical appliances per IEC 60730.
When designing with this part, ensure your PCB exposes the QFN-64 EP thermal pad to a copper keep-out block tied to GND for both thermal and electrical reference. Designers should also reserve one SERCOM port for firmware update via I2C/SPI boot-loader to simplify field service.
This page synthesizes distributor pricing, drop-in same-package alternatives from Microchip's SAM DA1 family, and practical design notes that go beyond the manufacturer datasheet to help engineers evaluate the ATSAMDA1J14B-MBT for safety-aware embedded designs.
드롭인 대체품: ATSAMDA1J14B-MBT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMDA1J14B-MBT (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, SERCOM Modules, ADC, Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAMDA1J14B-ABT
✅ 드롭인✓ 재고 있음
$2.45 / 개
데이터시트 보기 →ATSAMDA1G14B-MBT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.78 / 개
데이터시트 보기 →ATSAMDA1G15B-MBT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.1 / 개
데이터시트 보기 →ATSAMDA1E16B-ABT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.82 / 개
데이터시트 보기 →ATSAML11E15A-MFT
✅ 드롭인✓ 재고 있음
$1.89 / 개
데이터시트 보기 →ATSAMD20E18A-MU
✅ 드롭인✓ 재고 있음
$2.75 / 개
데이터시트 보기 →ATSAMDA1J14B-MBT 최대 정격 & 전기적 특성
| Core Architecture | ARM Cortex-M0+ |
| Core Count | 1 (Single-Core) |
| Maximum CPU Frequency | 48 MHz |
| DMIPS | 45 |
| Program Memory (Flash) | 16 KB (16K x 8) |
| SRAM | 4 KB |
| Read-While-Write Flash | 512 B |
| 패키지 | 64-QFN (9x9 mm) with Exposed Pad |
| 실장 유형 | Surface Mount |
| SERCOM Modules | 6 (configurable as USART / I2C / SPI) |
| USB Interface | Full-Speed USB Device |
| RoHS 상태 | Compliant |
ATSAMDA1J14B-MBT 64-qfn (9x9 mm) with exposed pad 핀 구성 가이드
ATSAMDA1J14B-MBT(64-qfn (9x9 mm) with exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAMDA1J14B-MBT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAMDA1J14B-MBT 적합 용도: 6 애플리케이션s: Smart Appliance Control (IEC 60730 Class B), BLDC and Stepper Motor Control, Industrial Sensor Nodes (4–20 mA, IO-Link), LED Lighting & Human-Machine Interface, Building Automation & HVAC Controllers, Low-Power IoT Edge Nodes.
Smart Appliance Control (IEC 60730 Class B)
The ATSAMDA1J14B-MBT targets IEC 60730 Class B white-goods designs (washing machines, dishwashers, ovens) where its SAM DA1 Functional-Safety (FuSa) diagnostics cover CPU, Flash, SRAM, clock, and ADC self-test. The 64-QFN (9x9 mm) integrates easily into main-control PCBs, while six SERCOM ports expose user-interface keys, sensors, and triac drivers. At 48 MHz the Cortex-M0+ core easily drives a graphical LCD UI plus a motor-control loop without DMIPS headroom concerns. Compared with legacy 8-bit MCUs it offers deterministic interrupt latency and Hardware AES for secure firmware updates in connected appliances.
추천
BLDC and Stepper Motor Control
The SAM DA1's 16-bit PWM controller with complementary outputs and dead-time insertion directly drives BLDC and stepper motor half-bridges, while the Cortex-M0+ 48 MHz core closes the FOC loop with deterministic latency. The 12-bit ADC (oversampled to 14-bit) samples phase currents simultaneously, reducing BOM by combining motor-control and housekeeping on one chip. Six SERCOMs connect to position encoders, Hall sensors, and isolation barriers, and the QFN-64 footprint fits compact motor-control PCBs. The 64-QFN exposed pad keeps junction temperatures low at high PWM duty cycles for industrial pumps, fans, and small EVs.
추천
Industrial Sensor Nodes (4–20 mA, IO-Link)
Industrial pressure, flow, and temperature sensor nodes leverage the ATSAMDA1J14B-MBT's 12-bit ADC with hardware oversampling to deliver 16-bit effective resolution at low sample rates, paired with SERCOM-based IO-Link or RS-485 transceivers. The Cortex-M0+ runs the IO-Link stack, calibration routines, and predictive-maintenance analytics in the 4 KB SRAM, while 16 KB Flash hosts the IEC 61131-9 application layer. Class B diagnostics help meet IEC 61508 SIL-1 requirements. The 64-QFN package and 48 MHz throughput are well-suited to compact IP67 sensor heads.
추천
LED Lighting & Human-Machine Interface
Architectural and commercial LED fixtures rely on the SAM DA1's 16-bit PWM for smooth logarithmic dimming and color-mixing across multiple channels, with Cortex-M0+ 48 MHz handling DALI-2 or DMX512 protocols over a USART-based SERCOM. Its low-power sleep modes (down to a few microamps) keep standby power below EU Ecodesign limits, while 16 KB Flash stores fixture personality, fade curves, and DALI device definitions. The exposed-pad QFN-64 dissipates heat efficiently when driving high-current LED strings, and 6 SERCOMs manage DMX, NFC, and firmware-update channels simultaneously.
추천
Building Automation & HVAC Controllers
Building-automation controllers (BACnet, Modbus, KNX) use the ATSAMDA1J14B-MBT's six SERCOMs to terminate RS-485, RS-232, I2C sensor buses, and the Full-Speed USB port for commissioning via PC. Class B diagnostics and the watchdog timer support EN 50178 / IEC 61131-2 compliance, while the Cortex-M0+ core executes BACnet scheduling and HVAC control loops at low current draw. The QFN-64 (9x9) footprint and industrial temperature range support DIN-rail-mounted controller designs with shared 3.3 V rails.
추천
Low-Power IoT Edge Nodes
Battery-powered IoT edge nodes benefit from the SAM DA1's IDLE/STANDBY current consumption in the microamp range and Event System that lets the ADC, RTC, and SERCOM wake the CPU only on real activity. The 16 KB Flash and 4 KB SRAM comfortably run Thread, Zigbee, or LoRaWAN MAC stacks referenced through 802.15.4 SX1276 transceivers, while 6 SERCOMs connect to sensors, debug, and external radios. The QFN-64 footprint allows compact coin-cell or energy-harvesting designs, and the 45 DMIPS per MHz figure keeps transmit-time current peaks short, preserving battery life.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMDA1J14B-MBT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAMDA1J14B-ABT | ATSAMDA1G14B-MBT | ATSAMDA1G15B-MBT | ATSAMDA1E16B-ABT | ATSAML11E15A-MFT | ATSAMD20E18A-MU |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9x9 mm) — MBT | 64-TQFP (10x10 mm) — ABT | 64-QFN (9x9 mm) — same | 64-QFN (9x9 mm) — same | 64-TQFP (10x10 mm) | 64-QFN (9x9 mm) — same | 48-QFN (different footprint) |
| Core | ARM Cortex-M0+ @ 48 MHz | ARM Cortex-M0+ @ 48 MHz | ARM Cortex-M0+ @ 48 MHz | ARM Cortex-M0+ @ 48 MHz | ARM Cortex-M0+ @ 48 MHz | ARM Cortex-M23 @ 32 MHz (TrustZone) | ARM Cortex-M0+ @ 48 MHz |
| Functional Safety / IEC 60730 | Yes (SAM DA1 FuSa) | Yes (SAM DA1 FuSa) | Yes (SAM DA1 FuSa) | Yes (SAM DA1 FuSa) | Yes (SAM DA1 FuSa) | No (TrustZone, not FuSa) | No (SAM D20, non-FuSa) |
| SERCOM Modules | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| USB Interface | Full-Speed USB Device | Full-Speed USB Device | Full-Speed USB Device | Full-Speed USB Device | Full-Speed USB Device | Full-Speed USB Device | No native USB (variants only) |
주요 차별점
- Smallest Flash/RAM in the SAM DA1 FuSa family (vs ATSAMDA1G15B-MBT)
- QFN package thermal performance vs TQFP sister (vs ATSAMDA1J14B-ABT)
- Functional Safety (IEC 60730 Class B) on-chip (vs ATSAMD20E18A-MU)
설계 노트
Estimated: the 64-QFN (9x9 mm) exposed pad (EP) must be soldered to a copper keep-out block of at least 0.5 in² connected to GND on the top layer. With 31.4 C/W typical θJA and an MCU running at 48 MHz active, the EP keeps junction rise well under 25 °C at moderate ambient — fail to solder the EP and junction temperature may exceed 100 °C in 25 °C ambient even at low CPU activity.
Place a 0.1 µF X7R decoupling capacitor within 3 mm of each power pin pair (VDD / GND), and bulk 4.7 µF / 10 µF tantalum or polymer within 10 mm of the EP. Use a star-ground topology with separate analog (AGND) and digital (GND) returns joined only under the EP. For USB, place the 90 Ω differential pair on the B-package D+/D- lines with matched length to ±150 mil.
Do not enable DMA on the SERCOM without checking the Event System channel availability — SAM DA1 SERCOMs share DMA triggers with the AES engine and ADC, so double-buffer data crossing could cause stalls. Also, the FuSa self-test routines must be invoked after every POR and before enabling external actuation (relays, triacs); skipping them puts the device out of IEC 60730 Class B compliance.
When routing the 48 MHz USB bus, keep D+/D- pairs to 90 Ω differential impedance on the outer layers, minimize vias, and place the 15 kΩ pull-down on D- as recommended by the SAM DA1 datasheet (Microchip document 60001579). For PWM signals controlling switching regulators, keep edges shorter than 20 ns by adding a 33 Ω series damping resistor if the trace exceeds 50 mm.
규정 준수 정보
RoHS compliance stated in Microchip SAM DA1 product page. AEC-Q100 is not applicable — the part is not automotive-qualified; choose ATSAMV71Q21B-CBT (AEC-Q100 SAM V71) for automotive applications.
