Microchip Technology

ATTINY461A-XU - 20MHz AVR MCU with 4KB Flash | Microchip

부품 번호: ATTINY461A-XU ✓ 활성
1.8 V to 5.5 V Vdss 20-pin TSSOP Package 20 MHz Speed 4 KB Memory
MOQ: 1 |

ATTINY461A-XU 개요

The Microchip Technology ATTINY461A-XU is an 8-bit AVR RISC microcontroller with a 20 MHz maximum clock, 4 KB of in-system programmable Flash, 256 bytes of EEPROM, 256 bytes of SRAM, and 16 general-purpose I/O lines, packaged in a 20-pin TSSOP. The ATtiny461A combines a compact AVR microcontroller core with high-speed ADCs, versatile timers, and picoPower characteristics for embedded control designs.

An 8-bit AVR microcontroller is a compact embedded-processing device built around a RISC architecture and designed to execute firmware that reads sensors, controls actuators, manages power sequencing, or handles communication protocols. Within the semiconductor hierarchy, the ATtiny461A belongs to the AVR family of 8-bit microcontrollers and operates as a system-on-chip containing Flash memory, SRAM, EEPROM, timers, serial interfaces, analog conversion circuitry, and I/O ports.

The ATTINY461A-XU provides 4 KB of Flash for program storage, 256 bytes of EEPROM for nonvolatile data, and 256 bytes of SRAM for working memory. Its 32 working registers support efficient AVR instruction execution, while 16 I/O lines provide interfaces for sensors, switches, indicators, and actuators. The device operates from 1.8 V to 5.5 V according to the published component description, allowing it to fit both low-voltage and conventional 5 V embedded systems.

The ATtiny461A family uses Microchip's enhanced AVR RISC architecture and picoPower technology. Its timer resources support timing and waveform-generation tasks, while its analog-to-digital converter supports measurement of external analog signals. The 20 MHz operating capability provides useful throughput for compact control systems without requiring a larger external processor, although actual execution time depends on the selected clock source and firmware configuration.

Typical uses include industrial sensor nodes, compact motor-control modules, instrumentation front ends, automated switches, lighting controllers, and low-power embedded products. The TSSOP-20 package also makes the controller practical for densely populated PCB layouts where a smaller package than a 28-pin or 40-pin device is useful.

Circuit design should preserve clean analog grounding, place the device input capacitors close to the supply pins, and verify all peripheral pin assignments against the manufacturer pin-description table before PCB routing. Firmware should also account for reset behavior, startup timing, brownout conditions, and the distinction between port pins that serve multiple peripheral functions.

This product record combines the manufacturer family specifications, exact ATTINY461A-XU package identification, sourcing information, same-package alternatives, and application-focused engineering guidance. It is intended to support component selection, PCB planning, firmware planning, and procurement without implying that alternatives with different memory sizes or peripheral configurations are automatically interchangeable.

드롭인 대체품: ATTINY461A-XU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATTINY461A-XU (동일 폼 팩터 및 풋프린트) — 차이점: Package, SRAM.

Microchip Technology
Package: TSSOP-20
SRAM: 512 B
비교 대상: ATTINY461A-XU →

ATTINY261A-15MU

✅ 드롭인 ⚠️ 사양 미검증
📦 20-pin TSSOP
Flash memory is 2 KB versus 4 KB, a 50% reduction, while the AVR core and 20 MHz operating class remain related

📋 참조 대체품 (카탈로그에 없음)

ATTINY861A-15MU

✅ 드롭인 ⚠️ 사양 미검증
📦 20-pin TSSOP
Flash memory is 8 KB versus 4 KB, providing 4 KB more program storage while retaining the related AVR family configuration

📋 참조 대체품 (카탈로그에 없음)

ATTINY167-A15XZ

✅ 드롭인
📦 20-pin TSSOP
Flash memory is 16 KB versus 4 KB, providing 12 KB more storage, but the peripheral mix and pin multiplexing require validation

📋 참조 대체품 (카탈로그에 없음)

ATTINY461A-XU 최대 정격 & 전기적 특성

Product Type 8-bit RISC microcontroller
Architecture AVR enhanced RISC
최대 클록 주파수 20 MHz
Program Flash Memory 4 KB
Flash Organization 2K x 16
EEPROM Memory 256 bytes
SRAM 256 bytes
General-Purpose I/O Lines 16
General-Purpose Working Registers 32
Timer/Counter 8-bit timer/counter with compare modes
Supply Voltage Range 1.8 V to 5.5 V
패키지 20-pin TSSOP
실장 유형 Surface mount
Temperature Grade Industrial temperature
Programming In-system programmable Flash

ATTINY461A-XU 20-pin tssop 핀 구성 가이드

ATTINY461A-XU(20-pin tssop 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

ATTINY461A-XU의 20-pin tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ATTINY461A-XU.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ATTINY461A-XU 적합 용도: 6 애플리케이션s: Industrial Sensor Node, Compact Motor Controller, Instrumentation Front End, Automated Lighting Controller, Battery-Powered IoT Control, Programmable Logic Controller.

🏭

Industrial Sensor Node

The ATTINY461A-XU fits compact industrial sensor nodes that acquire an analog input, apply filtering, evaluate thresholds, and report status over a serial link. Its 20 MHz AVR core provides processing headroom, while 4 KB of Flash stores application firmware and 256 bytes of SRAM support short working buffers. The 16 I/O lines allow sensor enable, interrupt, alarm, and communication connections. The 1.8 V to 5.5 V supply range supports both low-voltage sensors and 5 V industrial interfaces, although the ADC configuration and clock should be checked for the selected operating voltage.

🔧

Compact Motor Controller

The ATTINY461A-XU can serve as the command processor in a compact motor-control module using its timer and compare functions to generate timing references and control an external driver stage. Sixteen I/O lines leave interfaces for direction commands, fault inputs, position sensors, and status indicators, while the 20 MHz clock supports responsive control firmware. The 4 KB Flash limit favors compact algorithms, so larger motion routines may require another device. Motor current, isolation, protection, and ground-return paths must be engineered separately from the low-voltage microcontroller section.

📟

Instrumentation Front End

In a compact instrumentation front end, the ATTINY461A-XU can manage sensor selection, offset correction, threshold evaluation, and digital reporting. Its ADC-related resources and 16 I/O lines support several analog channels and control signals, while the 20 MHz AVR core allows local processing before data is sent to a host. The 256-byte SRAM is suitable for modest acquisition buffers rather than long waveform histories. Designers should use the manufacturer electrical characteristics to select resistor ranges, reference strategy, and acquisition timing for the required measurement accuracy.

💡

Automated Lighting Controller

The ATTINY461A-XU is suitable for automated lighting modules that combine button or sensor inputs with timer-based dimming, relay control, status indication, and fault detection. Its timer/counter resources support periodic control tasks, and 16 I/O lines provide flexible connections to switches, drivers, and indicators. The device can run from a 1.8 V to 5.5 V control domain, but an appropriate isolated or non-isolated driver stage is required for mains or high-current LED loads. Firmware must include safe startup and shutdown states for every controlled output.

🧩

Battery-Powered IoT Control

The ATTINY461A-XU can serve as the local controller in a small battery-powered IoT node that wakes for sensor readings, performs threshold logic, and controls a low-power radio or indicator. Its compact 20-pin TSSOP package leaves board area for the power system and radio, while picoPower characteristics support designs that spend substantial time idle. The 1.8 V minimum supply allows operation from low-energy rails, and 4 KB of Flash accommodates concise control firmware. Actual battery life depends on the clock, ADC usage, sleep configuration, radio behavior, and leakage of the complete board.

⚡

Programmable Logic Controller

The ATTINY461A-XU can implement a small programmable logic or sequence controller for equipment with discrete inputs and outputs. Sixteen I/O lines support buttons, selectors, interlocks, status LEDs, and actuator commands, while its timer resources coordinate timing sequences. Firmware can implement debouncing, state transitions, delays, fault latching, and communication reporting within the 4 KB Flash budget. Because the package is only 20 pins, pin multiplexing must be reviewed carefully. Production designs should also include brownout behavior, safe output defaults, and recovery after power interruption.

추천 제품 요약

ATTINY461A-XUR Same ATTINY461A device in a different ordering and packaging code 사용처: Industrial Sensor Node, Compact Motor Controller, Automated Lighting Controller, Programmable Logic Controller ATTINY167-A15XZ Related 20-pin TSSOP AVR controller with greater Flash memory 사용처: Industrial Sensor Node, Instrumentation Front End, Battery-Powered IoT Control ATTINY861A-15MU Related AVR controller with more Flash for expanded control firmware 사용처: Compact Motor Controller, Automated Lighting Controller, Programmable Logic Controller ATTINY261A-15MU Related low-Flash AVR option for simpler acquisition logic 사용처: Instrumentation Front End, Battery-Powered IoT Control
What is the operating voltage of ATTINY461A-XU?
The ATTINY461A-XU operates from 1.8 V to 5.5 V. According to the Microchip ATtiny461A family description and the published ATTINY461A-XU component specifications, this voltage range supports both low-voltage designs and conventional 5 V embedded systems. Confirm the selected clock configuration, operating frequency, and peripheral limits against the manufacturer datasheet before fixing the system supply voltage.
What are the key specifications of ATTINY461A-XU that engineers should know?
The ATTINY461A-XU is a 20 MHz, 8-bit AVR microcontroller with 4 KB of in-system programmable Flash, 256 bytes of EEPROM, 256 bytes of SRAM, and 16 general-purpose I/O lines. It is available in a 20-pin TSSOP and operates from 1.8 V to 5.5 V. The manufacturer identifies the device as an ATtiny461A-family member using the enhanced AVR RISC architecture and picoPower technology.
Where can I download the ATTINY461A-XU datasheet PDF?
The ATTINY461A-XU datasheet can be obtained from the Microchip ATtiny461A product page or the ATMEL/Atmel datasheet listing for the ATtiny461A family. The manufacturer product page is the preferred starting point because it links the current family documentation and product resources. Use the numbered pin-description table and electrical characteristics in the manufacturer datasheet when assigning signals and laying out the PCB.
Where can I find the ATTINY461A-XU pinout?
The ATTINY461A-XU pinout is documented in the manufacturer ATtiny461A datasheet, including the 20-pin TSSOP drawing and the pin-description table. Because several I/O pins can be reassigned to timers, ADC channels, USART functions, or programming interfaces, use that table for the exact silicon revision rather than relying on a generic 20-pin diagram. The TSSOP footprint itself is represented by the package drawing.
How much Flash memory and SRAM does ATTINY461A-XU have?
The ATTINY461A-XU provides 4 KB of in-system programmable Flash, 256 bytes of EEPROM, and 256 bytes of SRAM. According to the Microchip product-page description, the device also provides 32 general-purpose working registers and 16 general-purpose I/O lines. These resources make it appropriate for compact control firmware, while larger protocol stacks or data buffers may require a controller with more memory.
Where can I buy ATTINY461A-XU online?
Use the Request a Quote form on this page to request ATTINY461A-XU availability, current commercial terms, and the quantity required for your build. The exact MPN is a 20-pin TSSOP, 4 KB Flash device, so attach that package information to the request to avoid substitutions with different pin counts or memory configurations. Sourcing staff can confirm current lot availability and delivery scheduling.
What is the price of ATTINY461A-XU?
The current ATTINY461A-XU commercial price is presented through the Request a Quote form on this page. The request should identify the exact 20-pin TSSOP ordering code and required quantity so that any quotation corresponds to the correct package and device variant. The form is also the appropriate route for volume pricing, scheduled delivery, and production-volume availability questions.
What is the lead time for ATTINY461A-XU?
Request the current ATTINY461A-XU lead time through the Request a Quote form on this page. Lead time can depend on order quantity, scheduled delivery, and current factory or distribution availability, so an engineering estimate should not be used for production planning without confirmation. Include the target quantity, delivery date, and required packaging details in the request.
Is ATTINY461A-XU in stock?
Use the Request a Quote form on this page to check current ATTINY461A-XU availability for your required quantity. Stock status can change with purchasing volume and production schedules, so an immediate confirmation is preferable to relying on a general catalog listing. Specify whether small prototype quantities or scheduled production quantities are needed.
ATTINY461A-XU vs ATTINY461A-XUR - which is better for a new design?
ATTINY461A-XU and ATTINY461A-XUR describe the same 20-pin TSSOP ATTINY461A device family with equivalent core and memory capabilities, but their ordering codes refer to different packaging presentation. According to the component comparison, both use a 20-pin TSSOP and match the same 4K Flash, 256-byte EEPROM, 256-byte SRAM, ADC, 20 MHz, industrial-temperature device attributes. Select the ordering code required by your assembly and purchasing process.
When should I choose ATTINY461A-XU over ATTINY261A-15MU?
Choose ATTINY461A-XU when the design requires 4 KB of Flash and the associated ATtiny461A peripheral configuration. The ATTINY261A belongs to the related tinyAVR family but offers 2 KB of Flash, so it provides less program storage even though its core, 20 MHz operation, and 20-pin TSSOP format are similar. Existing firmware also requires a complete device and pin-function review before substitution.
Is ATTINY461A-XU suitable for a low-voltage sensor node?
The ATTINY461A-XU is suitable for low-voltage sensor-node designs because its specified supply range extends down to 1.8 V and its 20 MHz AVR core provides useful processing capability in a compact package. Its 4 KB Flash, 256-byte SRAM, 16 I/O lines, timer resources, and ADC support basic acquisition and control functions. Power consumption and ADC performance must still be evaluated at the intended system voltage and clock.
What can replace ATTINY461A-XU?
The closest documented same-family options are ATTINY261A-15MU, ATTINY861A-15MU, and ATTINY167-A15XZ because each is associated with a 20-pin TSSOP configuration, but none is automatically interchangeable with ATTINY461A-XU. Their Flash capacities, peripheral mixes, and pin multiplexing differ, so a replacement requires a full pin, clock, memory, analog, and firmware compatibility review rather than a footprint-only decision.
Is ATTINY167-A15XZ the same as ATTINY461A-XU?
No. ATTINY167-A15XZ and ATTINY461A-XU share a 20-pin TSSOP format, but their device roles and memory organizations differ. The ATTINY167-A15XZ is listed with 16 KB of Flash, while ATTINY461A-XU has 4 KB, 256 bytes of EEPROM, and 256 bytes of SRAM. The shared package can assist footprint planning, but pin functions and firmware must be revalidated before any substitution.
What is the best cross-brand equivalent for ATTINY461A-XU?
No cross-brand drop-in equivalent can be established from the documented cross-reference results. The identified alternatives are Microchip AVR-family devices rather than independently verified cross-brand pin-compatible parts, and a matching package alone does not prove compatibility. For production use, retain the exact ATTINY461A-XU or perform a manufacturer-supported cross-reference and complete a board-level, firmware, and peripheral review.

엔지니어링 참조 데이터: ATTINY461A-XU — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ATTINY461A-XU for compact embedded systems that need a 20 MHz 8-bit AVR controller, 4 KB of Flash, 256 bytes each of EEPROM and SRAM, 16 I/O lines, and a 20-pin TSSOP footprint. ATTINY261A-15MU is appropriate only when 2 KB of Flash is sufficient and the reduced memory footprint is useful. ATTINY861A-15MU can suit firmware that needs 8 KB of Flash, while ATTINY167-A15XZ provides 16 KB for more complex logic. For any substitution, verify the alternate-function mapping, ADC resources, timers, USART, interrupts, fuse settings, and board-level pin assignments. Package similarity alone does not establish software or peripheral compatibility.

대체품과의 비교

파라미터 이 제품 ATTINY261A-15MU ATTINY861A-15MU ATTINY167-A15XZ
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Core Processor 8-bit AVR enhanced RISC 8-bit AVR 8-bit AVR 8-bit AVR
Program Flash Memory 4 KB 2 KB 8 KB 16 KB

주요 차별점

  • Balanced embedded resource configuration (vs ATTINY261A-15MU)
  • More compact firmware storage than the 861A option (vs ATTINY861A-15MU)
  • Lower Flash demand than the 16 KB alternative (vs ATTINY167-A15XZ)

설계 노트

Route the TSSOP-20 footprint with the pin-1 orientation defined by the manufacturer package drawing and verify every programmable pin against the selected peripheral configuration. Keep traces to ADC inputs short, provide a quiet ground reference near the device, and place decoupling capacitors close to the supply and ground pins. Because many port functions are multiplexed, finalize the pin plan before routing rather than assigning signals after layout.

Budget the complete-board power budget rather than the microcontroller alone. The ATTINY461A-XU supports a 1.8 V to 5.5 V supply range, but the permitted clock and analog performance can depend on operating voltage. Select the regulator for the required rail, maintain local decoupling, and verify brownout behavior so the controller does not enter an undefined state during supply transitions.

Do not treat a matching TSSOP footprint as proof of drop-in compatibility. When evaluating ATTINY261A-15MU, ATTINY861A-15MU, or ATTINY167-A15XZ, compare Flash size, SRAM, EEPROM, timer channels, ADC channels, USART resources, interrupt vectors, fuse configuration, and every alternate-function pin. Existing firmware may also require changes because register locations and peripheral availability are not identical across all three related devices.

For analog measurements, use the manufacturer guidance for the ADC reference, input impedance, sample timing, and source impedance. Add local filtering only after accounting for ADC sampling behavior, and avoid routing measurement inputs beside fast-switching or high-current traces. Use a dedicated, low-impedance ground path from the device ground pin to the analog source when the board combines sensing and switching functions.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product description identifies the ATTINY461A as an industrial-temperature AVR microcontroller, but it does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

관련 검색

attiny461a datasheet ATTINY461A-XU datasheet ATTINY461A-XU datasheet pdf ATTINY461A-XU pinout ATTINY461A-XU TSSOP-20 footprint ATTINY461A-XU 20MHz specifications ATTINY461A-XU 4KB Flash Microchip ATTINY461A-XU ATTINY461A-XU equivalent ATTINY461A-XU replacement ATTINY461A-XU vs ATTINY167-A15XZ ATTINY461A-XU price ATTINY461A-XU stock ATTINY461A application circuit

관련 부품 & 용어

Microchip Technology ATTINY461A-XU ATTINY461A ATTINY261A-15MU ATTINY861A-15MU ATTINY167-A15XZ AVR enhanced RISC architecture 8-bit microcontroller tinyAVR picoPower in-system programmable Flash EEPROM SRAM ADC USART timer/counter 20-pin TSSOP TSSOP package family surface mount SMD industrial temperature grade 1.8 V to 5.5 V power supply sensor node motor controller
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기