Broadcom

BCM5221A4KMLG - 10/100 Ethernet PHY, 48-QFN | Broadcom

부품 번호: BCM5221A4KMLG ✓ 활성
2.5 V to 3.3 V Vdss 48-pin QFN Package
MOQ: 1 |

BCM5221A4KMLG 개요

Broadcom BCM5221A4KMLG is a single-port 10/100BASE-T Ethernet physical-layer transceiver with one driver and one receiver, operating from a 2.5 V to 3.3 V supply in a 48-pin QFN package. The PHY supports 10 Mbps and 100 Mbps links and is identified by the manufacturer as a low-power Fast Ethernet device with 175 mW power dissipation.

An Ethernet PHY is the physical-layer component within the Ethernet hierarchy of network interface controller, transceiver, and communications semiconductor. It converts digital Ethernet data from a MAC into signals suitable for a twisted-pair or fiber interface and converts received signals back into digital data. The BCM5221 therefore occupies the boundary between a host controller and physical network medium, allowing embedded systems to connect directly to 10/100BASE-T networks.

The device can be powered from either 2.5 V or 3.3 V and incorporates an integrated voltage regulator. Its 175 mW dissipation figure supports compact, power-conscious equipment designs. The -40°C to 85°C industrial temperature range also allows operation across commercial and industrial environments. An RMII-oriented product description and integrated regulator simplify implementation compared with a PHY requiring a larger external supply arrangement.

The BCM5221 family combines a 10/100BASE-TX/FX-capable physical layer with low-power operation and intelligent power-down states. These states are useful in systems that must reduce energy use without losing the ability to resume network operation. Exact media-interface details, clocking requirements, magnetics recommendations, and exposed-pad thermal guidance should be implemented from the pin-description table and application information in the manufacturer datasheet 5221-DS07-405-RDS.

Typical uses include industrial Ethernet controllers, embedded gateways, set-top equipment, printer electronics, automotive or transportation networking equipment, and compact communication modules. In an RMII design, the PHY connects to a network MAC or controller through its digital interface, while the analog side interfaces through magnetics to copper cabling. The 48-QFN footprint requires careful grounding and thermal design around its exposed pad.

A key implementation consideration is that Ethernet PHY performance depends on the complete signal chain, including supply filtering, magnetics, cable routing, and reference-clock quality. Follow the reference schematic and component recommendations in the manufacturer datasheet rather than treating the PHY as a standalone Ethernet interface. Confirm that the selected RMII timing, cable, and magnetics arrangement satisfies the system link budget and electromagnetic-emissions requirements.

This page combines the manufacturer datasheet, distributor product records, cross-reference findings, package information, application guidance, and drop-in replacement analysis for BCM5221A4KMLG. The comparison and design notes are intended to make footprint, voltage, interface, and sourcing decisions easier while keeping unresolved engineering details explicit.

드롭인 대체품: BCM5221A4KMLG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: BCM5221A4KMLG (동일 폼 팩터 및 풋프린트) — 차이점: Product Type.

Broadcom
Product Type: Single-port Ethernet PHY transceiver
비교 대상: BCM5221A4KMLG →

BCM5221A4KPT

✅ 드롭인
📦 48-pin QFN
Alternate BCM5221 ordering code; voltage, 10/100 Mbps speed, and package family are unchanged, while temperature, packaging, and option suffixes require confirmation

📋 참조 대체품 (카탈로그에 없음)

BCM5221A4KMLG 최대 정격 & 전기적 특성

Product Type Single-port Ethernet physical-layer transceiver
Ethernet Data Rate 10 Mbps or 100 Mbps
Driver/Receiver Configuration 1 driver / 1 receiver
Supply Voltage Range 2.5 V to 3.3 V
Power Dissipation 175 mW
동작 온도 범위 -40°C to +85°C
패키지 48-pin QFN
실장 유형 Surface mount
Integrated Voltage Regulator Yes
Intelligent Power-Down States Yes
Media Interface 10/100BASE-TX/FX
Digital Interface RMII
핀 수 48 pins
Channel Count 1 channel

BCM5221A4KMLG 48-pin qfn 핀 구성 가이드

BCM5221A4KMLG(48-pin qfn 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

BCM5221A4KMLG의 48-pin qfn 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: BCM5221A4KMLG.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

BCM5221A4KMLG 적합 용도: 6 애플리케이션s: Embedded Linux Ethernet Gateway, Industrial Automation Controller, Network Print and Copy Equipment, Industrial IoT Sensor Gateway, Set-Top and Media Adapter, Compact Communication Module.

🌐

Embedded Linux Ethernet Gateway

The BCM5221A4KMLG fits an embedded Linux gateway requiring one 10/100 Fast Ethernet copper port. Its 10 Mbps and 100 Mbps support, one-driver/one-receiver configuration, and 2.5 V or 3.3 V supply operation align with a host processor providing the digital MAC interface through RMII. The stated 175 mW dissipation limits thermal impact compared with a typical continuously active network interface. The PHY should be placed close to the magnetics and connector, with its supply and reference components placed in accordance with the manufacturer application layout. Linux driver compatibility, cable diagnostics, EMI behavior, and exact magnetics selection must still be validated at the system level.

🏭

Industrial Automation Controller

The BCM5221A4KMLG is suitable for industrial automation equipment requiring a stable 10/100BASE-T connection in a -40°C to +85°C environment. Its single-port architecture avoids unnecessary multi-channel PHY overhead, while the integrated regulator and support for either 2.5 V or 3.3 V simplify power planning. In a controller, the PHY connects the digital MAC interface to copper network circuitry through the appropriate isolation and magnetics arrangement. Layout should preserve short high-frequency return paths, isolate analog and digital grounds as directed by the manufacturer, and account for the QFN exposed pad in thermal analysis. Functional safety, surge, conducted-emissions, and industrial-network certification remain system-level validation items.

🖥️

Network Print and Copy Equipment

The BCM5221A4KMLG can provide the physical layer for a 10/100 Ethernet port in a printer, copier, or multifunction office device. A single Fast Ethernet link matches the common networking requirement of these products without imposing the power and area requirements of a multi-port gigabit PHY. The 175 mW device dissipation and intelligent power-down states are useful in office equipment that spends substantial time idle. The implementation should use the manufacturer's recommended magnetics, termination, reference-clock arrangement, and decoupling. Firmware must support the PHY's required status, auto-negotiation, and link-management functions while preserving compliance with the product's EMC and safety standards.

🧩

Industrial IoT Sensor Gateway

The BCM5221A4KMLG is appropriate for a compact industrial IoT gateway that must bridge local processing to a 10/100 Mbps Ethernet network. Its low 175 mW power dissipation helps conserve power in panel-mounted or remotely powered equipment, and the 2.5 V or 3.3 V supply flexibility can reduce system power-tree complexity. The PHY's intelligent power-down behavior supports low-activity operating modes without abandoning link management. Place the device, magnetics, and connector in a controlled signal-chain layout, with uninterrupted return paths and minimal high-speed trace length. The gateway designer must verify wake-up timing, cable reach, surge protection, EMC margins, and network-driver behavior across temperature and voltage corners.

📺

Set-Top and Media Adapter

The BCM5221A4KMLG fits a set-top box or media adapter that needs a single wired 10/100 Ethernet connection. The device provides one driver and one receiver, avoiding the overhead of multiple channels while supporting both 10 Mbps and 100 Mbps link rates. Its 48-pin QFN construction supports compact consumer-electronics layouts, although the exposed pad and magnetics require deliberate thermal and signal-integrity planning. Use the Broadcom reference arrangement for reference-clock components, supplies, and analog network connections to minimize radiated emissions. Product-specific requirements such as secure boot, network authentication, remote diagnostics, and standby behavior should be implemented around the PHY rather than changing its electrical interface without datasheet review.

⚡

Compact Communication Module

The BCM5221A4KMLG can be used inside a compact Fast Ethernet communication module that exposes a copper-network port to a host processor or controller. The 10/100 Mbps capability, integrated regulation, and 175 mW dissipation fit compact industrial and commercial modules where size and energy use are important. The 2.5 V and 3.3 V supply options can simplify interface with multiple host platforms. Designers should reserve the 48-pin footprint in the PCB before finalizing the enclosure and connector, and route the PHY-to-magnetics section away from switching nodes and noisy power-conversion areas. Thermal verification must include worst-case link activity and ambient temperature, while production testing should cover link negotiation, cable insertion, and recovery from power-down transitions.

What is the BCM5221A4KMLG?
The BCM5221A4KMLG is a single-port 10/100 Fast Ethernet physical-layer transceiver from Broadcom, packaged in a 48-pin QFN. According to the manufacturer datasheet 5221-DS07-405-RDS, it supports 10 Mbps and 100 Mbps operation, includes an integrated voltage regulator, and can operate from a 2.5 V or 3.3 V supply. It is intended to connect an Ethernet MAC or embedded controller to a physical network interface.
What voltage does BCM5221A4KMLG require?
The BCM5221A4KMLG accepts a 2.5 V to 3.3 V supply, giving designers flexibility in 2.5 V and 3.3 V systems. The manufacturer datasheet 5221-DS07-405-RDS also describes an integrated voltage regulator. Decoupling and supply-layout values should be taken directly from the datasheet's external-component and layout sections, because the exact requirements can depend on the selected interface and board implementation.
What Ethernet speeds does BCM5221A4KMLG support?
The BCM5221A4KMLG supports 10 Mbps and 100 Mbps Fast Ethernet operation as a one-driver, one-receiver PHY. Its product documentation identifies the physical layer as 10/100BASE-TX/FX capable. The Broadcom datasheet 5221-DS07-405-RDS should be consulted for the supported copper, fiber, auto-negotiation, and media-interface configurations associated with the complete BCM5221 design.
How much power does BCM5221A4KMLG dissipate?
The BCM5221A4KMLG has a stated power dissipation of 175 mW. According to the manufacturer datasheet 5221-DS07-405-RDS, the device also includes intelligent power-down states that conserve energy while permitting the product to resume operation automatically. The 175 mW figure is the manufacturer's device-level reference, so actual system heat varies with supply voltage, operating mode, and link activity.
Where can I download the BCM5221A4KMLG datasheet PDF?
The official Broadcom datasheet PDF is available through the manufacturer document link on this page. The document is identified as 5221-DS07-405-RDS and contains the electrical characteristics, pin descriptions, application information, and recommended circuit details for the BCM5221 family. Use the manufacturer PDF as the authoritative source for wiring, exposed-pad connections, and PCB layout rather than relying on a third-party copy.
Where can I find the BCM5221A4KMLG pinout?
The BCM5221A4KMLG uses a 48-pin QFN package, and its complete pin assignment is defined in the pin-description table of Broadcom datasheet 5221-DS07-405-RDS. Use that table when assigning signals to the MAC interface, analog network interface, supplies, reference components, clock, and exposed pad. The package-diagram link on this page provides a visual reference for the 48-pin footprint.
Is BCM5221A4KMLG suitable for industrial equipment?
The BCM5221A4KMLG is specified over -40°C to +85°C, making it suitable for industrial temperature environments when the rest of the circuit also meets the system requirements. The Broadcom datasheet 5221-DS07-405-RDS identifies this operating range, while the product listing describes the part as a single-port Ethernet PHY. Final suitability should also be checked against shock, vibration, EMC, and system reliability requirements.
What is the best drop-in replacement for BCM5221A4KMLG?
The closest documented same-footprint candidate is BCM5221A4KPT, but a replacement should not be treated as drop-in solely from an MPN-family comparison. According to Broadcom's BCM5221 documentation, the original is a 48-pin QFN device; the alternate ordering code must still be checked for package, pin function, temperature, media support, and supply compatibility. No five-part drop-in set was established from the available cross-reference results.
Can BCM5221A4KPT replace BCM5221A4KMLG?
BCM5221A4KPT is the closest documented alternate ordering code for BCM5221A4KMLG, but final replacement requires confirmation of the exact package and exposed-pad layout. Broadcom's BCM5221 family datasheet remains the controlling document for pin functions and operating limits. Compare the full ordering table, media interface, temperature grade, and PCB footprint before approving BCM5221A4KPT as a drop-in replacement.
When should I choose BCM5221A4KMLG over another Ethernet PHY?
Choose BCM5221A4KMLG when the design requires a 10/100 Mbps single-port PHY, a 2.5 V or 3.3 V supply, and a 48-pin QFN implementation. The 175 mW dissipation and integrated regulator are useful for compact embedded systems. Select another PHY instead when the product requires gigabit operation, a different package, automotive qualification, or a media interface outside the capabilities defined for BCM5221.
Is BCM5221A4KMLG suitable for an embedded Linux gateway?
The BCM5221A4KMLG is suitable for a 10/100 Fast Ethernet port in an embedded Linux gateway when its RMII and media requirements match the host controller. The Broadcom datasheet 5221-DS07-405-RDS identifies a single-port 10/100 PHY with integrated regulation and intelligent power-down states. Linux driver support, magnetics selection, isolation, and electromagnetic-emissions validation remain separate system-level requirements.
Where to buy BCM5221A4KMLG online?
Use the Request a Quote form on this page to request BCM5221A4KMLG availability, current lead time, and commercial terms. The exact ordering code is important because package, temperature, and delivery-option suffixes can identify different variants. This page's sourcing workflow is the appropriate route for a quote request and avoids confusion with look-alike parts or incomplete catalog listings.
What is the price of BCM5221A4KMLG?
Use the Request a Quote form on this page for the current BCM5221A4KMLG price and quantity schedule. Commercial pricing can vary with order quantity, package, delivery condition, market availability, and supply-chain timing. The product is shown with a quote-based sourcing workflow, so the displayed product page should be used to obtain a current transactional response rather than a static price.
What is the lead time for BCM5221A4KMLG?
Submit BCM5221A4KMLG through the Request a Quote form on this page to obtain its current lead time and minimum order quantity. Lead time depends on factory availability, allocation, package configuration, and the requested delivery quantity. A distributor listing that describes immediate shipment does not establish a guaranteed allocation for every order, so confirm the date against the accepted quotation.
Is BCM5221A4KMLG in stock?
Current BCM5221A4KMLG stock should be confirmed through the Request a Quote form on this page. The part is described as active by an industry product record, but active status does not guarantee an immediate factory allocation. Provide the required quantity, package, and delivery destination in the request so the supplier can return a current availability commitment.
What are the key specifications of BCM5221A4KMLG engineers should know?
The principal BCM5221A4KMLG specifications are 10/100 Mbps operation, one driver and one receiver, a 2.5 V to 3.3 V supply range, 175 mW power dissipation, and a 48-pin QFN package. Broadcom datasheet 5221-DS07-405-RDS also identifies an integrated voltage regulator, intelligent power-down states, and a -40°C to +85°C operating range. These are the primary constraints for architecture, thermal, and footprint decisions.

엔지니어링 참조 데이터: BCM5221A4KMLG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose BCM5221A4KMLG for a compact, low-power 10/100 Ethernet design that uses a 48-pin QFN footprint, accepts a 2.5 V or 3.3 V supply, and benefits from an integrated regulator and intelligent power-down states. BCM5221A4KPT is the closest documented Broadcom ordering alternative and is appropriate for an update when its package, temperature grade, and ordering suffix have been confirmed against the PCB and production requirements. Do not choose this device when the product requires gigabit Ethernet, multiple PHY channels, automotive qualification, or a package other than the 48-pin QFN. The listed 88X2222-family parts are different Ethernet transceiver products and are not presented as drop-in replacements because their channel counts and physical interfaces are not equivalent. Any approved substitution should be checked for pin function, exposed-pad connectivity, clock requirements, magnetics compatibility, EMC behavior, and long-term supply continuity.

대체품과의 비교

파라미터 이 제품 BCM5221A4KPT
Brand Broadcom Broadcom
Package 48-pin QFN 48-pin QFN
Product Type Single-port Ethernet PHY Single-port Ethernet PHY
Ethernet Data Rate 10 Mbps or 100 Mbps 10 Mbps or 100 Mbps
Supply Voltage Range 2.5 V to 3.3 V 2.5 V to 3.3 V
Power Dissipation 175 mW 175 mW
Driver/Receiver Configuration 1 driver / 1 receiver 1 driver / 1 receiver
Digital Interface RMII RMII
Integrated Voltage Regulator Yes Yes

주요 차별점

  • Very low stated power dissipation for a 10/100 PHY (vs BCM5221A4KPT)
  • Single-port configuration keeps the interface focused (vs BCM5221A4KPT)
  • Integrated regulator supports flexible supply design (vs BCM5221A4KPT)
  • Documented 48-pin QFN package enables compact layouts (vs BCM5221A4KPT)

설계 노트

Place the PHY, magnetics, and network connector as a compact signal-chain group, and keep the RMII traces short and continuously referenced to ground. Follow the component placement and high-speed trace geometry in Broadcom datasheet 5221-DS07-405-RDS. Do not route sensitive clock or analog-network paths beneath a switching regulator or beside an LCD timing converter. A solid, quiet ground plane reduces the coupling risk that can otherwise appear as link errors or electromagnetic-emissions failures.

Treat the 48-QFN exposed pad as both an electrical connection and a thermal path. Use the manufacturer land pattern and thermal-via recommendation rather than inventing via counts, then provide sufficient top- and bottom-layer copper for the system's worst-case ambient temperature and link activity. Although the manufacturer identifies 175 mW power dissipation, a higher junction temperature can be caused by limited copper, enclosure restrictions, or adjacent heat sources. Validate the assembled thermal path under realistic airflow and enclosure conditions.

Design the 2.5 V or 3.3 V supply path so the selected rail remains within the BCM5221 operating limits under cable insertion, link activity, and neighboring circuit transients. Place the manufacturer's recommended supply-decoupling components directly at the relevant pins and use the exact values and layout from the datasheet. Confirm startup and power-down sequencing with the RMII host because abrupt rail changes can affect link detection, reference-clock startup, and system-level brownout behavior.

Use the datasheet's reference-clock, magnetics, termination, and analog-network component values without substitution based on generic Ethernet guidance. The clock and PHY-to-magnetics paths carry high-frequency content even when the negotiated data rate is only 100 Mbps. Maintain the specified return path, avoid stubs, and observe the recommended component placement. If link negotiation or EMI testing is unstable, check the clock source and reference network before changing the magnetics or PHY settings.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The Broadcom datasheet states that BCM5221 components are not designed, intended, or certified for military, nuclear, medical, mass transportation, aviation, navigation, pollution control, hazardous-substances management, or other high-risk applications. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer declarations.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

BCM5221A4KMLG datasheet BCM5221A4KMLG pinout BCM5221A4KMLG datasheet pdf BCM5221A4KMLG equivalent BCM5221A4KMLG replacement BCM5221A4KMLG price BCM5221A4KMLG stock Broadcom BCM5221A4KMLG BCM5221 48-pin QFN pinout BCM5221 RMII application circuit BCM5221A4KMLG vs BCM5221A4KPT BCM5221A4KMLG schematic BCM5221A4KMLG footprint 10/100 Ethernet PHY 2.5V 3.3V

관련 부품 & 용어

Broadcom BCM5221A4KMLG BCM5221A4KPT 10/100BASE-T 10/100BASE-TX/FX Ethernet PHY Fast Ethernet physical-layer transceiver RMII Ethernet MAC QFN-48 QFN family surface-mount package integrated voltage regulator intelligent power-down power dissipation industrial Ethernet embedded Linux gateway network magnetics auto-negotiation 2.5 V supply 3.3 V supply -40°C to +85°C Broadcom datasheet 5221-DS07-405-RDS
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기