Broadcom

BCM5481A2KFBG - 1GbE Copper PHY | Broadcom | Networking

부품 번호: BCM5481A2KFBG ✗ 단종
10/100/1000BASE-T Rds(on) Rectangular grid-array BGA Package
MOQ: 1 |

BCM5481A2KFBG 개요

Broadcom BCM5481A2KFBG is a single-port Gigabit Ethernet Physical Layer transceiver for 10/100/1000BASE-T copper connectivity, with a 1000 Mbps data rate, RGMII MAC-facing interface, and 100-terminal rectangular BGA package. The component combines integrated 10, 100, and 1000 Mb/s copper PHY functions with CMOS technology in a surface-mount grid-array format designed for network-interface equipment.

A Gigabit Ethernet PHY is the physical-layer device that converts between a MAC controller's digital data and signals suitable for twisted-pair cabling. In the networking hierarchy, a PHY is a transceiver interface integrated circuit used with a media-access controller, Ethernet switch, router, gateway, or other equipment requiring 10/100/1000BASE-T copper connectivity. The BCM5481A2KFBG therefore handles the physical encoding, signaling, and cable-facing functions while the MAC supplies packet data through RGMII.

Key features include support for 10, 100, and 1000BASE-T operation, a 1000 Mbps data rate, an RGMII interface, CMOS construction, and a peak reflow temperature of 260°C. Its single-port architecture suits one copper Ethernet port per device. The 100-terminal rectangular BGA package permits dense board placement, but it also requires a multilayer PCB with conventional via-in-pad or fanout construction, controlled solder paste printing, and careful inspection of hidden joints.

The part is positioned for copper Ethernet links in routers, switches, gateways, set-top equipment, industrial networking products, and embedded systems. RGMII provides a parallel MAC-facing connection that can reduce pin count compared with a fully parallel GMII implementation at Gigabit rates. During board design, engineers should preserve the exact reference network, power distribution, grounding, and high-speed clock topology specified by the Broadcom datasheet because PHY performance depends on controlled impedance and low-noise power delivery.

Typical implementation places the BCM5481A2KFBG between a RGMII-capable MAC or Ethernet controller and an integrated magnetic module leading to an RJ45 connector. The PHY is used only for copper media; optical-fiber links require a different physical-layer device. System firmware must also configure the PHY through the applicable management interface and validate autonegotiation, link speed, duplex mode, and cable diagnostics.

A primary design consideration is BGA assembly. The package has 100 terminals and a 260°C peak reflow rating, but its fine pitch requires stencil design, profile control, and inspection methods suitable for large-array BGAs. Copper pours should provide both electrical return paths and thermal spreading, while analog supply and digital circuitry should be separated according to the manufacturer's layout guidance.

This product overview consolidates the confirmed device identity, package information, interface characteristics, sourcing answers, replacement boundaries, and practical PCB considerations. It also distinguishes a same-family MPN change from true pin-compatible alternatives, helping engineers shorten component search and qualification time while preserving the risk controls required for an advanced BGA networking device.

드롭인 대체품: BCM5481A2KFBG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

BCM5481A1KFBG

✅ 드롭인
📦 100-terminal rectangular BGA
A1 versus A2 Broadcom silicon revision; confirmed data does not quantify the electrical or register difference, so the match remains conditional pending datasheet and errata review.

📋 참조 대체품 (카탈로그에 없음)

BCM5481A2KFBG 최대 정격 & 전기적 특성

Product Type Single-port Gigabit Ethernet PHY transceiver
Supported Copper Standards 10/100/1000BASE-T
Maximum Data Rate 1000 Mbps
MAC Interface RGMII
Ethernet Compliance IEEE 802.3
Port Count 1 copper port
Technology CMOS
Package Type Rectangular grid-array BGA
Terminal Count 100 terminals
실장 유형 Surface mount
Peak Reflow Temperature 260°C
Halogen-Free Status Not compliant

BCM5481A2KFBG rectangular grid-array bga 핀 구성 가이드

BCM5481A2KFBG(rectangular grid-array bga 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

BCM5481A2KFBG의 rectangular grid-array bga 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: BCM5481A2KFBG.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

BCM5481A2KFBG 적합 용도: 6 애플리케이션s: Industrial Ethernet Router, Managed Ethernet Switch Port, Set-Top Box Gateway, Embedded Control System, Network Security Gateway, Industrial Sensor Gateway.

🏭

Industrial Ethernet Router

The BCM5481A2KFBG fits a single-port industrial router that must support 10, 100, or 1000 Mb/s links over twisted-pair copper. Its RGMII interface connects the PHY to a compatible Ethernet MAC, while its confirmed 1000 Mbps capability supports high-throughput gateway and routing designs. The PHY is placed on the line side of an Ethernet magnetic module leading to an RJ45 or ruggedized connector. The 100-terminal BGA requires a multilayer PCB, but its fine-pitch construction can reduce board area compared with a larger leaded transceiver. Firmware must support the PHY's initialization, autonegotiation, and link-monitoring functions, while the layout must preserve controlled clock and RGMII signal integrity.

🌐

Managed Ethernet Switch Port

The BCM5481A2KFBG is suitable for a managed switch line card requiring one 10/100/1000BASE-T copper port. Its 1000 Mbps data rate provides a full-rate Gigabit option, and RGMII enables connection to a switching ASIC or MAC through a compact parallel interface. The device can support copper links at 10, 100, or 1000 Mb/s, allowing automatic negotiation with legacy endpoints. Its primary PCB concern is that the 100-terminal BGA demands controlled assembly and via-in-pad or escape routing. Designers should follow the Broadcom layout for clock generation, analog supply separation, decoupling, and RGMII impedance matching to sustain reliable operation across supported cable conditions.

📺

Set-Top Box Gateway

The BCM5481A2KFBG can provide copper Ethernet connectivity in a set-top box or home gateway requiring a single 10/100/1000BASE-T port. The RGMII interface reduces the connection burden to a compatible MAC, and the PHY handles the physical layer for copper media rather than optical links. Its 100-terminal BGA package supports compact board layouts in space-conscious consumer equipment. Implementation requires a properly designed Ethernet magnetic path, separate low-noise supply routing, and a PCB stack that supports the manufacturer's high-speed escape-routing requirements. Software should validate PHY detection, negotiated speed, duplex operation, and recovery after cable changes to maintain reliable service across the three supported BASE-T rates.

🔧

Embedded Control System

The BCM5481A2KFBG is applicable to an embedded control system that adds a wired Gigabit Ethernet service port alongside a real-time controller. A RGMII-capable network processor or MAC can exchange frames with the PHY, supporting copper connectivity at 10, 100, or 1000 Mb/s for configuration transfer, diagnostics, and supervisory data. The single-port topology avoids unnecessary PHY channels when only one cable interface is required. Because the component uses a 100-terminal BGA, the embedded board must use a controlled assembly process, adequate via density, and thermal copper. The design should also isolate Ethernet magnetics from sensitive analog sections and validate operating-temperature requirements before releasing the equipment for industrial deployment.

🖥️

Network Security Gateway

The BCM5481A2KFBG can serve as the copper Ethernet physical layer in a network security gateway that provides one administrative or downstream port. Its RGMII interface supports integration with a network processor, and its 10/100/1000BASE-T support allows compatibility with management terminals and access devices operating at different link rates. The PHY should be connected through a network magnetic module with the layout and component values defined by the Broadcom design guidance. Secure systems also need careful power filtering and controlled return paths to reduce coupling from switching circuitry into the Ethernet front end. Firmware configuration should include deterministic link checks and error handling to support controlled recovery after cable or endpoint disturbances.

🧩

Industrial Sensor Gateway

The BCM5481A2KFBG fits an industrial sensor gateway that aggregates local sensor traffic and provides a wired copper uplink. Its single-port Gigabit PHY supports three nominal operating rates, allowing the gateway to connect reliably to plant networks or engineering workstations using 10, 100, or 1000 Mb/s. The RGMII interface connects to a suitable gateway processor, while the copper PHY occupies the physical layer between that processor and an isolation network module. Because the package is a 100-terminal BGA, the gateway board should provide adequate escape routing, layer transitions, and copper thermal relief. The complete assembly must be evaluated for temperature range, vibration, and long-term copper-link reliability under industrial environmental conditions.

추천 제품 요약

BCM5481A1KFBG Same-family single-port Gigabit PHY candidate 사용처: Industrial Ethernet Router, Managed Ethernet Switch Port, Set-Top Box Gateway, Embedded Control System, Network Security Gateway, Industrial Sensor Gateway
What is the BCM5481A2KFBG?
The BCM5481A2KFBG is a single-port Gigabit Ethernet PHY transceiver from Broadcom that supports 10/100/1000BASE-T copper networking with a maximum data rate of 1000 Mbps. It uses an RGMII interface to connect with a MAC controller and is packaged in a 100-terminal rectangular BGA for surface-mount network equipment.
What are the key specifications of BCM5481A2KFBG that engineers should know?
The BCM5481A2KFBG is a CMOS, single-port Ethernet transceiver with a 1000 Mbps maximum data rate, 10/100/1000BASE-T copper support, an RGMII MAC interface, IEEE 802.3 operation, and a 100-terminal rectangular BGA package. Its stated peak reflow temperature is 260°C. Detailed supply-voltage, current, and temperature limits must be confirmed in the manufacturer datasheet before schematic release.
Where can I download the BCM5481A2KFBG datasheet PDF?
The BCM5481A2KFBG datasheet PDF is reachable through the linked datasheet page, and Broadcom's product documentation is the preferred authority for design release. The identified document contains two pages and describes the device as a 10/100/1000BASE-T Gigabit copper transceiver. Use the manufacturer's pin, electrical, and application sections when assigning PCB functions.
Where can I find the BCM5481A2KFBG pinout?
The BCM5481A2KFBG pin assignment is published in the Broadcom datasheet rather than in the distributor summaries. It uses a 100-terminal rectangular BGA, so use the manufacturer pin-description table and land pattern when assigning BGA balls. Do not infer ball functions from package position because the exposed and power balls must be connected exactly as specified.
What applications use the BCM5481A2KFBG?
The BCM5481A2KFBG is suitable for routers, Ethernet switches, gateways, set-top equipment, industrial networking products, and embedded systems with one copper port. Its RGMII interface connects to a suitable MAC, while the PHY performs the physical-layer functions required for 10/100/1000BASE-T operation over twisted-pair copper through a network magnetic module.
Can BCM5481A2KFBG be used with a fiber-optic link?
No. The BCM5481A2KFBG is a copper Ethernet PHY for 10/100/1000BASE-T twisted-pair media, not an optical transceiver. A fiber link requires an SFP, SFP+, or other optical PHY with compatible laser or photodiode interfaces. The copper PHY may still be used elsewhere in the same equipment, but it cannot replace the optical physical layer.
What is the difference between BCM5481A2KFBG and BCM5481A1KFBG?
BCM5481A1KFBG is the closest identified same-family MPN because its Broadcom BCM5481 naming and KFBG package suffix match BCM5481A2KFBG. The confirmed listing does not expose the internal A1-versus-A2 silicon revision, so engineers should compare revision identifiers, errata, firmware requirements, and lifecycle terms before treating it as a production substitution.
What can replace BCM5481A2KFBG?
BCM5481A1KFBG is the only closely identified same-family candidate with the same Broadcom BCM5481 family and KFBG package suffix. Other cross-reference entries have different package identifiers or manufacturer-specific footprints and therefore cannot be called drop-in replacements without a complete pin, ball-map, register, and firmware review. A PCB redesign may be necessary when moving outside the BCM5481 family.
Is BCM5481A2KFBG the same as LAN8820I-ABZJ?
No. LAN8820I-ABZJ is a different manufacturer's Gigabit Ethernet PHY and is not established as pin-compatible with the Broadcom BCM5481A2KFBG by the cross-reference data. The devices may provide related copper-networking functions, but different packages, register maps, clocking, initialization procedures, and management interfaces can prevent a direct substitution.
When should I choose BCM5481A2KFBG over BCM5481A1KFBG?
Choose BCM5481A2KFBG when it matches the exact Broadcom qualification, lifecycle, silicon revision, and software-support requirements for the design. Consider BCM5481A1KFBG only after its datasheet, pin map, errata, and revision differences are verified against the BCM5481A2KFBG. The matching KFBG suffix makes it a candidate, but the suffix alone does not prove identical functionality.
Is BCM5481A2KFBG suitable for an industrial router?
The BCM5481A2KFBG can be used in an industrial router when its operating-temperature, voltage, regulatory, and qualification requirements meet the product specification. Its confirmed features include one 10/100/1000BASE-T copper port, a 1000 Mbps rate, RGMII, and a 100-terminal BGA package. Industrial suitability still requires checking temperature limits and product qualification.
Where can I buy BCM5481A2KFBG and what is its lead time?
Use the Request a Quote form on this page to request BCM5481A2KFBG pricing, current availability, minimum order quantity, and lead time from XAIPART. Stock and delivery timing can change, so the quotation response should be used for the current commitment. The part is a catalogued Broadcom component with an identified 100-terminal BGA package.
What is the price of BCM5481A2KFBG?
The current BCM5481A2KFBG price should be requested through the Request a Quote form on this page because quotations depend on quantity, sourcing condition, and delivery requirements. The product is listed as the Broadcom BCM5481A2KFBG-ND catalog item and is identified as a single-gigabit PHY in a 100-terminal rectangular BGA package.
Is BCM5481A2KFBG in stock?
Current BCM5481A2KFBG stock should be confirmed through the Request a Quote form on this page. The device is listed for order as Broadcom BCM5481A2KFBG-ND, but that catalog identity does not by itself establish live inventory at the requested quantity. Ask for the lot, date code, package condition, and delivery schedule with the quotation.
How should the BCM5481A2KFBG BGA footprint be designed?
The BCM5481A2KFBG footprint must follow the Broadcom datasheet's 100-terminal land pattern, including ball pitch, package dimensions, and any exposed thermal or power-ball treatment. Keep the high-speed RGMII and clock paths impedance controlled, provide low-impedance supply and ground planes, and apply the manufacturer's layer-stack and via recommendations.
Does BCM5481A2KFBG require an external Ethernet transformer?
A typical 10/100/1000BASE-T copper design uses an Ethernet network magnetic module between the PHY and the RJ45 connector. The BCM5481A2KFBG itself is the digital copper PHY, while the magnetic module provides galvanic isolation, impedance transformation, and common-mode protection. The exact transformer and connection network must follow the Broadcom reference design.

엔지니어링 참조 데이터: BCM5481A2KFBG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose BCM5481A2KFBG for a single-port 10/100/1000BASE-T design that uses RGMII and a 100-terminal BGA footprint, particularly when Broadcom-specific validation and lifecycle history are important. Consider BCM5481A1KFBG as the closest package-matched candidate, but verify its A1 silicon revision, errata, registers, initialization sequence, and production status before approving it as a drop-in substitution. The listed LAN8820I, VSC8211, 88E1116, and similar cross-reference parts should be treated as redesign candidates because manufacturer-specific packages, ball maps, clock requirements, and management interfaces may differ. For new copper-only products, compare the complete Broadcom datasheet, PCB reference design, software-support burden, and assembly capability before releasing the design.

대체품과의 비교

파라미터 이 제품 BCM5481A1KFBG
Brand Broadcom Broadcom
Package 100-terminal rectangular BGA 100-terminal rectangular BGA
Product Family BCM5481 BCM5481
Silicon Revision Code A2 A1
Port Configuration Single-port Single-port

주요 차별점

  • Closest identified package-matched Broadcom alternative (vs BCM5481A1KFBG)
  • Single-port design limits board area (vs Multi-port Ethernet PHY designs)
  • Gigabit-rate copper connectivity (vs 100 Mb/s-only Ethernet PHYs)

설계 노트

Implement the 100-terminal BGA on a multilayer PCB using the Broadcom land pattern, ball-pitch dimensions, and stackup guidance. Confirm whether the design uses via-in-pad or component-side escape routing, and define the solder-mask and paste apertures for a 260°C peak-reflow assembly. Do not derive the footprint solely from a generic BGA library because ball-map changes can create hidden connectivity or short-circuit risks.

Route RGMII and its clock as controlled-impedance interfaces with the shortest practical connections and the reference plane identified in the manufacturer's layout guidance. Keep PHY supply and ground planes continuous, place decoupling close to the relevant pins, and separate noisy digital or switching-converter return currents from the Ethernet analog section. Confirm signal and return-path continuity across every layer transition.

Do not treat every cross-reference MPN as a drop-in replacement. BCM5481A1KFBG is the closest identified same-family candidate, but the A1 and A2 revisions still require comparison of the datasheet, errata, initialization procedure, and management registers. LAN8820I-ABZJ, VSC8211VW, and other listed equivalents use manufacturer-specific packages and interfaces, so they require a PCB and firmware review rather than a simple last-time-buy substitution.

Finalize supply rails and decoupling only from the manufacturer electrical tables, including voltage tolerance, startup behavior, and current at 10, 100, and 1000 Mb/s operating modes. Place bulk and local ceramic decoupling according to the reference design, then verify the assembled board for acceptable noise at the PHY, magnetic module, and RJ45 return paths. Avoid adding large capacitors or ferrite components that could alter the required power or signal network.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
No
분쟁 광물
Unknown

The cross-reference record identifies the device as halogen-free not compliant and estimates an end-of-life date in 2026. RoHS, REACH, lead-free, and conflict-minerals status were not established from a manufacturer declaration.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

BCM5481A2KFBG datasheet BCM5481A2KFBG pinout BCM5481A2KFBG datasheet pdf BCM5481A2KFBG equivalent BCM5481A2KFBG replacement BCM5481A2KFBG cross reference BCM5481A2KFBG footprint Broadcom BCM5481A2KFBG BCM5481A2KFBG price BCM5481A2KFBG stock BCM5481A2KFBG 1000 Mbps PHY BCM5481A2KFBG RGMII interface BCM5481A2KFBG application circuit BCM5481A2KFBG vs BCM5481A1KFBG

관련 부품 & 용어

Broadcom BCM5481A2KFBG BCM5481A1KFBG BCM5481 Gigabit Ethernet PHY Ethernet transceiver 10/100/1000BASE-T RGMII IEEE 802.3 Media Access Controller 1000 Mbps CMOS 100-terminal BGA BGA package family surface mount Ethernet magnetic module RJ45 connector twisted-pair copper industrial router managed Ethernet switch network gateway autonegotiation 260°C peak reflow halogen-free not compliant
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기