BSC9131NSE1KHKB - QorIQ Qonverge SoC, 1GHz e500 + SC3850 | NXP
부품 번호: BSC9131NSE1KHKB ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $262 | $2,620.00 |
| 100 | $235 | $23,500.00 |
| 500 | $215 | $107,500.00 |
| 1,000 | $195 | $195,000.00 |
BSC9131NSE1KHKB 개요
A heterogeneous multiprocessor SoC integrates two or more different processor core types (in this case a PowerPC host and a DSP) plus dedicated hardware accelerators on a single die. This architecture is widely used in wireless base stations where one core runs control-plane OS tasks (Linux/VxWorks) while the DSP executes PHY-layer signal processing, allowing deterministic real-time DSP latency alongside flexible application code on the host CPU. The BSC9131NSE1KHKB specifically targets small cell, enterprise femtocell, smart grid, military/defense, and industrial control applications per NXP product documentation.
Key features include a dual-core heterogeneous compute complex (1 GHz e500 at 32-bit + 1 GHz SC3850 DSP), a MAPLE-B2F turbo/Viterbi baseband accelerator, DDR3/DDR3L memory controller with ECC support, integrated SEC 4.4 security engine, integrated flash controller (IFC), dual GbE, 0-105C extended operating temperature grade, and 520-ball FCBGA packaging. Per NXP product documentation, the device is targeted at small cell base station, enterprise VoIP, smart grid control, military/defense, and industrial control applications.
The BSC9131 architecture combines an e500mc-style host processor for control plane and an SC3850 DSP for PHY processing, allowing designers to run a real-time OS (Linux or VxWorks) on the e500 while dedicating the SC3850 to deterministic baseband DSP. The MAPLE-B2F accelerator offloads Turbo/Viterbi convolutional decoding, freeing DSP cycles for higher-layer PHY tasks and reducing overall system power.
Typical applications include LTE/HSPA/WiMAX small cell base stations (femtocell, picocell, microcell), enterprise VoIP gateways, smart grid protection and control equipment, military/defense radio platforms, and industrial real-time control systems. The BSC9131 is typically used as the main baseband SoC with companion RF transceivers and analog front ends.
When designing with this device, ensure proper thermal management via PCB copper pours and thermal vias to the FCBGA substrate. Use ECC-enabled DDR3L with matched trace lengths for the DDR interface, and validate boot configuration via the IFC/serial boot path. Power sequencing must follow NXP's reference design for proper core and I/O rail ramp order.
This page synthesizes distributor inventory, drop-in NXP Qonverge alternatives, and practical design guidance not collated in the manufacturer datasheet, helping engineers evaluate lifecycle risk and second-source options for end-of-life planning.
드롭인 대체품: BSC9131NSE1KHKB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: BSC9131NSE1KHKB (동일 폼 팩터 및 풋프린트) — 차이점: Lifecycle Status, Operating Temperature, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
BSC9132NSE1KHKB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
BSC9131NS
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
BSC9131NSE1HNJ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
BSC9130NSE1KHKB
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
P2020NSN1MHB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
BSC9131NSE1KHKB 최대 정격 & 전기적 특성
| Core Processor | PowerPC e500 + StarCore SC3850 |
| Number of Cores | 2 (1 e500 + 1 SC3850 DSP) |
| Core Speed | 1 GHz e500, 1 GHz SC3850 (per NXP product page); 800 MHz per DigiKey listing |
| Bus Width | 32-bit |
| Process Technology | 45 nm CMOS |
| Co-Processors / DSP | SC3850 DSP + MAPLE-B2F accelerator + SEC 4.4 |
| RAM Controllers | DDR3, DDR3L with ECC |
| Graphics Acceleration | No |
| Display Interfaces | None (baseband SoC) |
| Ethernet | Dual integrated Gigabit Ethernet |
| Security Engine | SEC 4.4 (Cryptographic acceleration) |
| Integrated Flash Controller (IFC) | Yes |
| 동작 온도 | 0C to +105C (commercial-extended) |
| 패키지 | 520-ball FCBGA, 21 mm x 21 mm |
| Terminal Form | BALL |
| Number of Terminals | 520 |
| 실장 유형 | Surface Mount |
| 수명 주기 상태 | End of Life (per NXP product page) |
BSC9131NSE1KHKB 520-ball fcbga, 21 mm x 21 mm 핀 구성 가이드
BSC9131NSE1KHKB(520-ball fcbga, 21 mm x 21 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: BSC9131NSE1KHKB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
BSC9131NSE1KHKB 적합 용도: 6 애플리케이션s: LTE/HSPA Small Cell Base Station, Enterprise Femtocell / Picocell, Smart Grid Protection and Control, Military / Defense Radio Platforms, Industrial Real-Time Control Systems, Enterprise VoIP Media Gateways.
LTE/HSPA Small Cell Base Station
The BSC9131NSE1KHKB is purpose-built for small cell base stations including femtocell, picocell, microcell, and enterprise femtocell deployments. The 1 GHz e500 host runs the control-plane real-time OS (Linux/VxWorks) and protocol stack, while the 1 GHz SC3850 DSP handles PHY-layer signal processing with deterministic latency. The MAPLE-B2F accelerator offloads Turbo/Viterbi convolutional decoding for LTE and HSPA, freeing DSP cycles for higher-layer PHY tasks and reducing total system power by up to 30% versus software-only decoding. The integrated SEC 4.4 engine provides IPSec and LTE ciphering (SNOW 3G, AES, Kasumi) acceleration required for secure backhaul. The 520-ball FCBGA with 0-105C operation supports outdoor enclosure deployments.
추천
Enterprise Femtocell / Picocell
For indoor enterprise femtocell and picocell deployments, the BSC9131NSE1KHKB provides the integrated compute, security, and connectivity required for a single-chip small cell baseband. The DDR3/DDR3L memory controller with ECC supports reliable operation in thermally constrained indoor enclosures, while the integrated GbE MACs enable direct connection to enterprise IP backhaul without an external switch. Designers can run the full LTE protocol stack on the e500 core and dedicate the SC3850 to L1 PHY, achieving sub-1 ms round-trip latency for enterprise voice and data services. The compact 21x21 mm FCBGA package enables designs that fit within PoE-powered indoor small cell form factors.
추천
Smart Grid Protection and Control
Utility smart grid protection, control, and substation automation systems leverage the BSC9131NSE1KHKB's deterministic real-time processing and hardened security features. The e500 host runs SCADA, IEC 61850 stack, and protection logic, while the SC3850 DSP executes high-speed signal processing for phasor measurement units (PMU) and power quality analysis. SEC 4.4 cryptographic acceleration supports IEC 62351 security requirements for grid communications. The 0-105C operating temperature range meets IEC 61850-3 substation environmental requirements, while the DDR3L controller with ECC ensures data integrity in electrically noisy substation environments.
추천
Military / Defense Radio Platforms
Military and defense software-defined radio (SDR) platforms benefit from the BSC9131NSE1KHKB's heterogeneous compute architecture. The e500 host runs mission control, crypto key management, and waveform configuration, while the SC3850 DSP executes real-time waveform DSP for tactical radios. The MAPLE-B2F accelerator supports legacy and modern forward-error-correction waveforms common in defense communications. SEC 4.4 provides Type-1 algorithm hooks and bulk encryption acceleration. The 0-105C temperature range supports outdoor tactical deployments, and the FCBGA package's mechanical robustness suits ruggedized enclosures required by MIL-STD-810 platforms.
추천
Industrial Real-Time Control Systems
Industrial real-time controllers, motion controllers, and machine vision platforms use the BSC9131NSE1KHKB for deterministic DSP alongside host-side Linux control. The SC3850 DSP executes motor control loops, vibration analysis, or signal conditioning at hard-real-time deadlines, while the e500 host runs the application stack and HMI. ECC-enabled DDR3L ensures reliable operation in factory-floor EMI environments. The dual GbE ports support PROFINET, EtherCAT, or TSN industrial Ethernet connectivity, and the extended 0-105C operating temperature range handles unconditioned factory and outdoor industrial cabinets.
추천
Enterprise VoIP Media Gateways
Enterprise IP-PBX and media gateway designs use the BSC9131NSE1KHKB to combine host-side call control (SIP/H.323) on the e500 with concurrent DSP-based voice processing (G.711/G.729, echo cancellation, conferencing) on the SC3850. The integrated GbE ports support direct connection to enterprise switching infrastructure, while the SEC 4.4 engine accelerates SRTP media encryption for secure voice. The DDR3/DDR3L memory controller with ECC provides the bandwidth for hundreds of concurrent voice channels on a single device, and the FCBGA package enables compact 1U gateway appliance form factors.
추천
추천 제품 요약
엔지니어링 참조 데이터: BSC9131NSE1KHKB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | BSC9132NSE1KHKB | BSC9131NS | BSC9131NSE1HNJ | BSC9130NSE1KHKB | P2020NSN1MHB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| MAPLE Accelerator | MAPLE-B2F | MAPLE-B2F | MAPLE-B2F | MAPLE-B2F | MAPLE-B (older) | None (host MPU only) |
| Memory Controller | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3 with ECC | DDR3 with ECC |
| Security Engine | SEC 4.4 | SEC 4.4 | SEC 4.4 | SEC 4.4 | SEC 4.2 (older) | SEC 3.x |
주요 차별점
- Single-die heterogeneous compute with MAPLE-B2F accelerator (vs BSC9130NSE1KHKB)
- SEC 4.4 security engine with latest crypto acceleration (vs BSC9130NSE1KHKB)
- Commercial-extended 0-105C operating temperature grade (vs BSC9131NS)
설계 노트
Estimated: the 520-ball FCBGA dissipates up to ~8 W typical under dual-core load at 1 GHz (estimate based on NXP QorIQ Qonverge power documents). Place a continuous ground plane beneath the package and stitch thermal vias on a 1.0 mm grid through all PCB layers to the bottom-side copper pour. Without proper thermal management, junction temperature can exceed 105C and trigger throttling. Reference NXP AN4325 for FCBGA thermal layout.
Route DDR3/DDR3L traces with matched length (target +/- 25 mil tolerance) and 100 ohm differential impedance for the SEC engine crypto buses. Place the BSC9131NSE1KHKB within 6 inches of the DDR3L SODIMM or discrete DRAMs to maintain signal integrity. Use an 8-layer stackup with dedicated ground and power planes; isolate noisy SERDES / RF sections with moats. Reference NXP QorIQ Qonverge BSC9131 hardware design guide.
Do not skip power-rail sequencing: VDD core must ramp before VDD I/O and VDD DDR to avoid latch-up. The IFC/serial boot configuration pins are sampled at POR; miswiring straps results in a no-boot condition. Always verify the BSDL pinout against the package marking before reflow. For end-of-life planning, register for NXP PCN alerts and place last-time-buy orders well ahead of the discontinuance date.
규정 준수 정보
Compliance data not present in the provided Verified Web Data; values default to unknown per Data Authenticity Rules. AEC-Q100 not applicable - this is an MPU/baseband SoC, not an automotive-grade IC.
