C8051F022-GQ - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs
부품 번호: C8051F022-GQ ✓ 활성C8051F022-GQ 개요
An 8-bit microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals in one integrated circuit. The CIP-51 core in the C8051F022-GQ uses an 8051-compatible instruction architecture while operating at 25 MHz. This places the device in the broader hierarchy of microcontrollers, embedded processors, and mixed-signal integrated circuits designed to control sensors, communications, and analog systems.
The device provides 64 KB of programmable Flash for firmware, 4.25 KB of internal RAM, and communication interfaces identified by the C8051F02x family documentation. Its ADC can be referenced to the DAC0 output or an external VREF input on C8051F020/2 devices, supporting measurements that require controlled analog reference voltages. Separate ADC and DAC resources make the MCU useful where a digital controller must also generate or monitor analog signals.
The 10-bit SAR ADC, 8-channel multiplexing, and 100 ksps conversion capability are balanced by a 12-bit, 2-channel DAC and two analog comparators. Five 16-bit timers support timing, pulse-width measurement, and periodic control tasks. The 25 MHz operating speed provides deterministic execution for embedded control, while the 100-pin package exposes the expanded analog and digital peripheral set.
Typical uses include industrial data acquisition, sensor conditioning, process monitoring, building controls, and compact embedded instruments. In a data-acquisition system, the MCU can scan analog inputs through the ADC, apply calibration and filtering in Flash-based firmware, and use the DAC for excitation or reference generation. The same device also fits communication-oriented control boards that need multiple timers and mixed-signal peripherals.
Designers should verify startup behavior, oscillator configuration, analog-reference stability, and peripheral pin multiplexing in the manufacturer datasheet. Decoupling should be placed directly beside the appropriate supply pins, while analog and digital return currents should be routed to avoid coupling converter switching noise into ADC measurements.
This page combines the manufacturer's mixed-signal feature set with practical interface guidance, verified lifecycle information, replacement considerations, and application-oriented design notes. It is intended to help engineers determine whether the C8051F022-GQ provides the required Flash, RAM, conversion performance, timers, and package capacity without creating an unnecessary PCB redesign.
드롭인 대체품: C8051F022-GQ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: C8051F022-GQ (동일 폼 팩터 및 풋프린트) — 차이점: ADC Resolution, DAC Resolution, Package.
C8051F022-GQR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F023-GQ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F023-GQR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F022-GQ 최대 정격 & 전기적 특성
| Core Architecture | 8051-compatible CIP-51 |
| CPU Bit Width | 8 bit |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 64 KB |
| On-Chip RAM | 4.25 KB |
| ADC Resolution | 10 bit |
| ADC Channel Count | 8 channels |
| ADC Sampling Rate | 100 ksps |
| ADC Architecture | Successive-approximation register (SAR) |
| DAC Resolution | 12 bit |
| DAC Channel Count | 2 channels |
| Comparator Count | 2 |
| Timer Count | 5 timers |
| Timer Resolution | 16 bit |
| 패키지 | 100-pin TQFP |
| Package Body Size | 14 mm x 14 mm |
| 실장 유형 | Surface mount |
| Program Memory Type | In-system programmable Flash |
| RoHS 상태 | unknown |
| REACH Status | unknown |
C8051F022-GQ 14 mm x 14 mm 핀 구성 가이드
C8051F022-GQ(14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F022-GQ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F022-GQ 적합 용도: 6 애플리케이션s: Industrial Sensor Acquisition, Process Control and Monitoring, Precision Signal Conditioning, Building Automation, Compact Test and Measurement, Communication Equipment Control.
Industrial Sensor Acquisition
The C8051F022-GQ is suitable for acquiring multiple analog sensor signals in industrial monitoring equipment because it combines a 10-bit, 8-channel ADC with a 25 MHz control core. Each channel can be selected in firmware, converted at rates up to 100 ksps, and processed without requiring a separate ADC controller. The 64 KB of Flash provides room for calibration tables, filtering routines, and communications firmware. A practical implementation should keep sensor inputs away from switching-node currents, use a quiet reference arrangement, and apply gain and offset calibration before reporting measurements.
추천
Process Control and Monitoring
The C8051F022-GQ can serve as the local controller in a process-monitoring system by scanning pressure, temperature, or level inputs, evaluating the results, and driving control outputs. Its eight 10-bit ADC channels provide adequate resolution for many industrial supervisory functions, while two comparators can generate fast threshold events for limit detection. The two DAC channels support setpoint generation or analog test signals. Five 16-bit timers allow precise acquisition and output intervals, and the 25 MHz CIP-51 core provides sufficient throughput for filtering, control logic, and operator-interface updates.
추천
Precision Signal Conditioning
The C8051F022-GQ fits compact signal-conditioning modules that need both measurement and programmable analog output. The 10-bit, 8-channel SAR ADC can digitize transducer or waveform inputs, while the 12-bit, 2-channel DAC can generate excitation, reference, or compensation signals. Two on-chip comparators support thresholding and independent protection functions. Because the MCU integrates analog and digital circuitry, layout should separate sensitive analog paths from processor and memory return currents, and the analog reference must remain within the device's specified operating conditions.
추천
Building Automation
The C8051F022-GQ can act as a node controller in a building automation or environmental monitoring network. It can read multiple analog inputs from temperature, humidity, occupancy, or air-quality interfaces, apply thresholds and hysteresis, and control outputs through its timers and digital peripherals. The 64 KB Flash footprint is useful for local networking logic and configuration data, while the 4.25 KB RAM supports short protocol buffers and intermediate calculations. Low-power operation should be evaluated against the active current and clock requirements of the selected configuration.
추천
Compact Test and Measurement
The C8051F022-GQ is useful in compact test equipment where a controller must acquire analog measurements and produce controlled stimulus. Its eight-channel 10-bit ADC can sample several test points at up to 100 ksps, and the 12-bit DAC can create calibration or excitation outputs. Five 16-bit timers coordinate stimulus intervals, acquisition timing, and communication tasks. For precision instruments, include factory calibration, reference stability, and measurement uncertainty in the system design rather than assuming converter resolution alone defines end-to-end accuracy.
추천
Communication Equipment Control
The C8051F022-GQ can provide protocol handling and supervisory control in communication equipment that also monitors analog system conditions. Its 25 MHz core supports deterministic tasks such as framing, timeout management, status reporting, and local diagnostics, while five 16-bit timers support baud-rate generation and periodic maintenance functions. Analog channels can supervise supply, temperature, or signal-strength conditions, and the two comparators can detect thresholds without continuous software polling. Firmware partitioning should reserve memory for communications while avoiding fragmentation in the 4.25 KB RAM.
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F022-GQ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | C8051F022-GQR | C8051F023-GQ | C8051F023-GQR |
|---|---|---|---|---|
| Package | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| CPU Core | 8051-compatible CIP-51, 8 bit | 8051-compatible CIP-51, 8 bit | 8051-compatible CIP-51, 8 bit | 8051-compatible CIP-51, 8 bit |
| Maximum CPU Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| ADC Configuration | 10-bit, 8-channel, 100 ksps | 10-bit, 8-channel, 100 ksps | 10-bit SAR ADC with alternate channel configuration | 10-bit SAR ADC with alternate channel configuration |
| Timers | 5 x 16-bit | 5 x 16-bit | 5 x 16-bit | 5 x 16-bit |
| Orderable Suffix | GQ | GQR | GQ | GQR |
주요 차별점
- Integrated mixed-signal resources reduce external controller count (vs C8051F023-GQ)
- Exact electrical configuration with production-format flexibility (vs C8051F022-GQR)
- Ample timing resources for acquisition and control loops (vs C8051F023-GQR)
설계 노트
Place the required bypass capacitors adjacent to the corresponding power pins and provide a continuous ground plane beneath the TQFP footprint. Keep the analog-reference and measurement traces short, and route them away from switching-regulator outputs. The 100-pin package exposes enough pins for separate analog and digital functions, but routing discipline remains necessary because the ADC and DAC share the same silicon and supply system as the 25 MHz processor.
Use the manufacturer's pin-description and alternate-function tables before assigning every TQFP connection. Several peripheral resources can be routed to different pins, and changing the alternate-function mapping can alter the effective ADC channel count or timer connections. Validate the final pin map against the selected oscillator, communication, debug, and mixed-signal settings rather than relying only on the basic device name.
Do not treat the shortened C8051F022 family name as a complete orderable MPN. Confirm GQ or GQR, package drawing, temperature grade, and delivery format before releasing a PCB or purchase order. The C8051F022-GQR has the same stated electrical functionality as C8051F022-GQ but uses a different shipping format, so the suffix must be reconciled with the assembler's requirements.
Separate analog and digital supply paths where the board architecture permits, and decouple each rail close to its pins. Analog measurements can be affected by ripple coupled through supply impedance even when the MCU is operating correctly. Check the family datasheet for permitted supply combinations, startup sequencing, and reference-source limitations before connecting external excitation or DAC outputs to the analog subsystem.
규정 준수 정보
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the cited manufacturer and distributor material. AEC-Q100 qualification is not claimed for this device.