Silicon Labs

C8051F022-GQ - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs

Артикул: C8051F022-GQ ✓ Активен
100-pin TQFP Package 25 MHz Speed 64 KB Memory
MOQ: 1 |

C8051F022-GQ Обзор

The Silicon Labs C8051F022-GQ is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 64 KB of in-system-programmable Flash, 4.25 KB of RAM, and a 100-pin TQFP package measuring 14 mm by 14 mm. Its principal features include a 10-bit, 8-channel ADC sampling at 100 ksps, a 12-bit, 2-channel DAC, two comparators, and five 16-bit timers.

An 8-bit microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals in one integrated circuit. The CIP-51 core in the C8051F022-GQ uses an 8051-compatible instruction architecture while operating at 25 MHz. This places the device in the broader hierarchy of microcontrollers, embedded processors, and mixed-signal integrated circuits designed to control sensors, communications, and analog systems.

The device provides 64 KB of programmable Flash for firmware, 4.25 KB of internal RAM, and communication interfaces identified by the C8051F02x family documentation. Its ADC can be referenced to the DAC0 output or an external VREF input on C8051F020/2 devices, supporting measurements that require controlled analog reference voltages. Separate ADC and DAC resources make the MCU useful where a digital controller must also generate or monitor analog signals.

The 10-bit SAR ADC, 8-channel multiplexing, and 100 ksps conversion capability are balanced by a 12-bit, 2-channel DAC and two analog comparators. Five 16-bit timers support timing, pulse-width measurement, and periodic control tasks. The 25 MHz operating speed provides deterministic execution for embedded control, while the 100-pin package exposes the expanded analog and digital peripheral set.

Typical uses include industrial data acquisition, sensor conditioning, process monitoring, building controls, and compact embedded instruments. In a data-acquisition system, the MCU can scan analog inputs through the ADC, apply calibration and filtering in Flash-based firmware, and use the DAC for excitation or reference generation. The same device also fits communication-oriented control boards that need multiple timers and mixed-signal peripherals.

Designers should verify startup behavior, oscillator configuration, analog-reference stability, and peripheral pin multiplexing in the manufacturer datasheet. Decoupling should be placed directly beside the appropriate supply pins, while analog and digital return currents should be routed to avoid coupling converter switching noise into ADC measurements.

This page combines the manufacturer's mixed-signal feature set with practical interface guidance, verified lifecycle information, replacement considerations, and application-oriented design notes. It is intended to help engineers determine whether the C8051F022-GQ provides the required Flash, RAM, conversion performance, timers, and package capacity without creating an unnecessary PCB redesign.

Аналоги без доработки для C8051F022-GQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с C8051F022-GQ (тот же форм-фактор и посадочное место) — отличается по ADC Resolution, DAC Resolution, Package.

Silicon Labs
ADC Resolution: 10-bit
DAC Resolution: 12-bit
Package: 100-TQFP (14 x 14 mm)
Сравнить с C8051F022-GQ →
Silicon Labs
ADC Resolution: 10-bit
DAC Resolution: 12-bit
Package: 100-TQFP (14 x 14 mm)
Сравнить с C8051F022-GQ →

C8051F022-GQR

✅ Прямая замена
📦 TQFP-100 (14 mm x 14 mm)
Same C8051F022 electrical functionality and 25 MHz, 64 KB, 4.25 KB ratings; suffix changes the shipping format

📋 Справочный аналог (нет в каталоге)

C8051F023-GQ

✅ Прямая замена
📦 TQFP-100 (14 mm x 14 mm)
Shares the 25 MHz C8051F02x platform and 100-pin family platform; ADC configuration differs from C8051F022

📋 Справочный аналог (нет в каталоге)

C8051F023-GQR

✅ Прямая замена
📦 TQFP-100 (14 mm x 14 mm)
Shares the 25 MHz C8051F02x platform and 100-pin family platform; ADC configuration and shipping format differ

📋 Справочный аналог (нет в каталоге)

C8051F022-GQ Максимальные параметры и электрические характеристики

Core Architecture 8051-compatible CIP-51
CPU Bit Width 8 bit
Maximum CPU Frequency 25 MHz
Flash Memory 64 KB
On-Chip RAM 4.25 KB
ADC Resolution 10 bit
ADC Channel Count 8 channels
ADC Sampling Rate 100 ksps
ADC Architecture Successive-approximation register (SAR)
DAC Resolution 12 bit
DAC Channel Count 2 channels
Comparator Count 2
Timer Count 5 timers
Timer Resolution 16 bit
Корпус 100-pin TQFP
Package Body Size 14 mm x 14 mm
Тип монтажа Surface mount
Program Memory Type In-system programmable Flash
Статус RoHS unknown
REACH Status unknown

Руководство по цоколевке C8051F022-GQ в корпусе 14 mm x 14 mm

Цоколевка для C8051F022-GQ (корпус 14 mm x 14 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 14 mm x 14 mm для C8051F022-GQ

Нет подробных данных о распиновке для C8051F022-GQ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

C8051F022-GQ подходит для 6 применениеs: Industrial Sensor Acquisition, Process Control and Monitoring, Precision Signal Conditioning, Building Automation, Compact Test and Measurement, Communication Equipment Control.

🏭

Industrial Sensor Acquisition

The C8051F022-GQ is suitable for acquiring multiple analog sensor signals in industrial monitoring equipment because it combines a 10-bit, 8-channel ADC with a 25 MHz control core. Each channel can be selected in firmware, converted at rates up to 100 ksps, and processed without requiring a separate ADC controller. The 64 KB of Flash provides room for calibration tables, filtering routines, and communications firmware. A practical implementation should keep sensor inputs away from switching-node currents, use a quiet reference arrangement, and apply gain and offset calibration before reporting measurements.

⚡

Process Control and Monitoring

The C8051F022-GQ can serve as the local controller in a process-monitoring system by scanning pressure, temperature, or level inputs, evaluating the results, and driving control outputs. Its eight 10-bit ADC channels provide adequate resolution for many industrial supervisory functions, while two comparators can generate fast threshold events for limit detection. The two DAC channels support setpoint generation or analog test signals. Five 16-bit timers allow precise acquisition and output intervals, and the 25 MHz CIP-51 core provides sufficient throughput for filtering, control logic, and operator-interface updates.

🔧

Precision Signal Conditioning

The C8051F022-GQ fits compact signal-conditioning modules that need both measurement and programmable analog output. The 10-bit, 8-channel SAR ADC can digitize transducer or waveform inputs, while the 12-bit, 2-channel DAC can generate excitation, reference, or compensation signals. Two on-chip comparators support thresholding and independent protection functions. Because the MCU integrates analog and digital circuitry, layout should separate sensitive analog paths from processor and memory return currents, and the analog reference must remain within the device's specified operating conditions.

🧩

Building Automation

The C8051F022-GQ can act as a node controller in a building automation or environmental monitoring network. It can read multiple analog inputs from temperature, humidity, occupancy, or air-quality interfaces, apply thresholds and hysteresis, and control outputs through its timers and digital peripherals. The 64 KB Flash footprint is useful for local networking logic and configuration data, while the 4.25 KB RAM supports short protocol buffers and intermediate calculations. Low-power operation should be evaluated against the active current and clock requirements of the selected configuration.

📊

Compact Test and Measurement

The C8051F022-GQ is useful in compact test equipment where a controller must acquire analog measurements and produce controlled stimulus. Its eight-channel 10-bit ADC can sample several test points at up to 100 ksps, and the 12-bit DAC can create calibration or excitation outputs. Five 16-bit timers coordinate stimulus intervals, acquisition timing, and communication tasks. For precision instruments, include factory calibration, reference stability, and measurement uncertainty in the system design rather than assuming converter resolution alone defines end-to-end accuracy.

🌐

Communication Equipment Control

The C8051F022-GQ can provide protocol handling and supervisory control in communication equipment that also monitors analog system conditions. Its 25 MHz core supports deterministic tasks such as framing, timeout management, status reporting, and local diagnostics, while five 16-bit timers support baud-rate generation and periodic maintenance functions. Analog channels can supervise supply, temperature, or signal-strength conditions, and the two comparators can detect thresholds without continuous software polling. Firmware partitioning should reserve memory for communications while avoiding fragmentation in the 4.25 KB RAM.

Сводка рекомендуемых товаров

C8051F023-GQ Same C8051F02x mixed-signal family with related ADC resources Используется в: Industrial Sensor Acquisition, Process Control and Monitoring, Precision Signal Conditioning, Building Automation, Compact Test and Measurement, Communication Equipment Control C8051F022-GQR Same C8051F022 device configuration in an alternate shipping format Используется в: Industrial Sensor Acquisition, Process Control and Monitoring, Precision Signal Conditioning, Building Automation, Compact Test and Measurement, Communication Equipment Control
What are the key specifications of C8051F022-GQ that engineers should know?
The C8051F022-GQ combines a 25 MHz 8051-compatible CIP-51 core with 64 KB of Flash, 4.25 KB of RAM, and mixed-signal peripherals in a 100-pin TQFP package. According to the Silicon Labs product page, it includes a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, two comparators, and five 16-bit timers. Its 14 mm by 14 mm package provides access to the expanded analog and timer resources required by industrial controls, data-acquisition systems, and embedded instruments.
Where can I download the C8051F022-GQ datasheet PDF?
The C8051F022-GQ datasheet PDF is available through the Silicon Labs C8051F020, C8051F021, C8051F022, and C8051F023 family document hosted by Mouser. Use the manufacturer's pin-description table, electrical characteristics, memory map, and ADC sections when assigning PCB tracks and configuring the device. The manufacturer device page also provides the C8051F022 specification summary and supports the same-device C8051F022 ordering code.
Where can I find the C8051F022-GQ pinout and package information?
The C8051F022-GQ uses a 100-pin TQFP package with a 14 mm by 14 mm body, and the complete numbered pin assignment appears in the manufacturer's C8051F02x family datasheet. Assign signals by consulting that pin-description table, including alternate peripheral functions and analog-capable pins. The C8051F022-GQ designation identifies the exact orderable device, while the product page confirms its QFP100 construction and mixed-signal feature set.
What is the difference between C8051F022 and C8051F022-GQ?
C8051F022-GQ is the fully orderable 100-pin TQFP version of the C8051F022 device, with a 25 MHz core, 64 KB Flash, and 4.25 KB RAM. Product comparisons identify the C8051F022 as the base device and C8051F022-GQ as its specified package variant. The GQ suffix is important because package, temperature, and ordering options must be matched against the PCB footprint and production requirements rather than treating the shortened family name as a complete MPN.
How fast is the C8051F022-GQ ADC and what resolution does it use?
The C8051F022-GQ includes a 10-bit successive-approximation ADC with eight analog input channels and a maximum sampling rate of 100 ksps. According to the Silicon Labs manufacturer page, this ADC can form part of a dual-conversion subsystem alongside an 8-bit, 500 ksps ADC described for the C8051F02x family. Use the family datasheet to select the reference, configure acquisition timing, and apply channel-specific gain and offset calibration.
What DAC and analog-comparison resources are available on C8051F022-GQ?
The C8051F022-GQ provides a 12-bit, 2-channel DAC and two comparators in addition to its primary 10-bit ADC. The Silicon Labs product page identifies these resources as part of the device's analog-intensive architecture. The DAC can generate controlled analog levels or serve as an ADC reference in applicable configurations, while the comparators support threshold monitoring, signal conditioning, and direct digital comparisons against analog inputs.
Can C8051F022-GQ control industrial sensors and analog processes?
Yes, the C8051F022-GQ is well suited to compact industrial sensing because it combines eight 10-bit ADC channels, a 100 ksps conversion rate, two comparators, and five 16-bit timers on one microcontroller. It can scan transducers, perform calibration, update control outputs, and manage timing functions without a separate analog-processing device. The main design checks are analog-reference quality, input voltage limits, sensor settling time, and isolation between switching power circuits and measurement inputs.
When should I choose C8051F022-GQ for a new design?
Choose C8051F022-GQ when a design needs an 8-bit control platform with more than 64 KB of programmable firmware and integrated conversion resources. Its 25 MHz core, 4.25 KB RAM, 10-bit ADC, 12-bit DAC, two comparators, and five 16-bit timers reduce the need for external mixed-signal support. It is less attractive when a product requires a large RAM footprint, a very large firmware image, or a modern high-speed peripheral set beyond this device's 100-pin mixed-signal configuration.
What is the best drop-in replacement for C8051F022-GQ?
The closest verified drop-in option is C8051F022-GQR, which uses the same C8051F022 device and electrical functionality while changing the shipping format. A broader selection of pin-compatible equivalents was not established, so C8051F230-GQ, C8051F380-GQ, C8051F131-GQR, C8051F120-GQ, and C8051F005-GQ should not be treated as drop-in replacements without a complete pin and peripheral audit. Use the Request a Quote form to discuss exact MPN, packaging, and continuity requirements.
Can C8051F022-GQ replace C8051F022-GQR?
C8051F022-GQ and C8051F022-GQR describe the same C8051F022 electrical device, but their orderable suffix codes should be matched to the board's assembly and delivery requirements. The manufacturer family documentation identifies the core, memory, converters, comparators, and timers as common to the device. Before substitution, confirm the package drawing, temperature grade, pin compatibility, and the exact shipping format required by the production line.
Is C8051F022-GQ suitable for data acquisition and test equipment?
The C8051F022-GQ suits compact data-acquisition and test products that need several analog inputs plus programmable output signals. Its 10-bit, 8-channel, 100 ksps ADC supports repeated measurements, while the 12-bit, 2-channel DAC can provide test excitation or a controlled analog reference. The five 16-bit timers help coordinate sampling and stimulus timing. Precision metrology applications should additionally evaluate offset, gain, noise, and reference accuracy against system requirements.
What power and decoupling practices are important for C8051F022-GQ?
Place the required supply bypass capacitors close to their associated power pins and provide a low-impedance ground return for analog and digital signals. The manufacturer family datasheet should be consulted for the exact supply connections, decoupling values, and analog-reference requirements. Keep switching-regulator current loops away from ADC and DAC traces, and route analog grounds carefully to prevent converter ripple or digital return current from adding measurement error.
Where to buy C8051F022-GQ online?
Use the Request a Quote form on this page to request C8051F022-GQ availability, lead time, and a quotation for the exact 100-pin TQFP orderable MPN. Because the quotation may depend on package, quantity, and production schedule, confirm all order details before releasing a purchase order. The manufacturer product page and family datasheet are the appropriate technical references for confirming device functionality and documentation.
What is the lead time and stock status for C8051F022-GQ?
Current stock and a production lead time should be confirmed through the Request a Quote form on this page. The C8051F022-GQ is listed by major distributors and remains associated with a current Silicon Labs product page, but that does not guarantee a fixed quantity is available for every order. State your required quantity, target date, and permitted alternative suffixes when requesting a quotation to obtain an actionable lead-time commitment.
What is the price of C8051F022-GQ?
Use the Request a Quote form on this page for a current C8051F022-GQ quotation. Pricing can vary with order quantity, package handling, and market availability, so a static figure may not represent the commercial terms offered for your production requirement. Include the target annual usage, forecast, and acceptable alternate suffix codes so the quotation can reflect the actual sourcing plan.
Is C8051F022-GQ RoHS compliant and suitable for automotive designs?
The C8051F022-GQ's RoHS and REACH status cannot be confirmed from the current technical material, and the device is not identified as an AEC-Q100-qualified automotive part. Treat both compliance questions as unknown until the manufacturer or its authorized documentation confirms the exact orderable MPN. Automotive designs should also require an explicitly qualified variant and a complete review of temperature range, qualification, functional safety, and change-control requirements.

Справочные инженерные данные для C8051F022-GQ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose C8051F022-GQ when an embedded system needs a deterministic 8-bit control core with 64 KB of programmable Flash, 4.25 KB of RAM, and a compact set of mixed-signal resources. Its 10-bit, 8-channel, 100 ksps ADC, 12-bit DAC, two comparators, and five 16-bit timers make it particularly useful for sensor acquisition, process supervision, test equipment, and compact control panels. C8051F022-GQR is the closest alternative when the assembly process requires the alternate shipping format, but the suffix must match procurement and production needs. C8051F023-GQ and C8051F023-GQR are candidates only when their alternate ADC organization is acceptable after firmware and pin-function review. Parts such as C8051F230-GQ, C8051F380-GQ, C8051F131-GQR, C8051F120-GQ, and C8051F005-GQ should not be treated as drop-in replacements because family-level similarity does not establish identical package pins, memory, and peripheral assignments.

Сравнение с аналогами

Параметр Этот товар C8051F022-GQR C8051F023-GQ C8051F023-GQR
Package 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm) 100-pin TQFP (14 mm x 14 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
CPU Core 8051-compatible CIP-51, 8 bit 8051-compatible CIP-51, 8 bit 8051-compatible CIP-51, 8 bit 8051-compatible CIP-51, 8 bit
Maximum CPU Frequency 25 MHz 25 MHz 25 MHz 25 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB
ADC Configuration 10-bit, 8-channel, 100 ksps 10-bit, 8-channel, 100 ksps 10-bit SAR ADC with alternate channel configuration 10-bit SAR ADC with alternate channel configuration
Timers 5 x 16-bit 5 x 16-bit 5 x 16-bit 5 x 16-bit
Orderable Suffix GQ GQR GQ GQR

Ключевые отличия

  • Integrated mixed-signal resources reduce external controller count (против C8051F023-GQ)
  • Exact electrical configuration with production-format flexibility (против C8051F022-GQR)
  • Ample timing resources for acquisition and control loops (против C8051F023-GQR)

Заметки по проектированию

Place the required bypass capacitors adjacent to the corresponding power pins and provide a continuous ground plane beneath the TQFP footprint. Keep the analog-reference and measurement traces short, and route them away from switching-regulator outputs. The 100-pin package exposes enough pins for separate analog and digital functions, but routing discipline remains necessary because the ADC and DAC share the same silicon and supply system as the 25 MHz processor.

Use the manufacturer's pin-description and alternate-function tables before assigning every TQFP connection. Several peripheral resources can be routed to different pins, and changing the alternate-function mapping can alter the effective ADC channel count or timer connections. Validate the final pin map against the selected oscillator, communication, debug, and mixed-signal settings rather than relying only on the basic device name.

Do not treat the shortened C8051F022 family name as a complete orderable MPN. Confirm GQ or GQR, package drawing, temperature grade, and delivery format before releasing a PCB or purchase order. The C8051F022-GQR has the same stated electrical functionality as C8051F022-GQ but uses a different shipping format, so the suffix must be reconciled with the assembler's requirements.

Separate analog and digital supply paths where the board architecture permits, and decouple each rail close to its pins. Analog measurements can be affected by ripple coupled through supply impedance even when the MCU is operating correctly. Check the family datasheet for permitted supply combinations, startup sequencing, and reference-source limitations before connecting external excitation or DAC outputs to the analog subsystem.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the cited manufacturer and distributor material. AEC-Q100 qualification is not claimed for this device.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

c8051f022 datasheet c8051f022 gqr C8051F022-GQ datasheet pdf C8051F022-GQ pinout C8051F022-GQ specifications C8051F022-GQ equivalent C8051F022-GQ replacement C8051F022-GQ cross reference C8051F022-GQ TQFP-100 C8051F022-GQ 10-bit ADC Silicon Labs C8051F022-GQ C8051F022-GQ price C8051F022-GQ stock C8051F022-GQ sensor acquisition

Связанные компоненты & термины

Silicon Labs C8051F022-GQ C8051F022 C8051F022-GQR C8051F023-GQ C8051F023-GQR C8051F02x CIP-51 core 8051-compatible architecture 8-bit microcontroller mixed-signal MCU embedded processor semiconductor 64 KB Flash 4.25 KB RAM 10-bit SAR ADC 8-channel ADC 100 ksps 12-bit DAC 2-channel DAC analog comparator 16-bit timer TQFP-100 QFP package family surface-mount device in-system programming industrial sensor acquisition process monitoring data acquisition test and measurement
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ