C8051F023 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs
부품 번호: C8051F023 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.9587 | $7.96 |
| 10 | $7.9587 | $79.59 |
| 100 | $7.9587 | $795.87 |
| 500 | $7.9587 | $3,979.35 |
| 1,000 | $7.9587 | $7,958.70 |
C8051F023 개요
A mixed-signal microcontroller combines a digital processor with analog conversion and comparison functions on one semiconductor die. The C8051F023 sits in the hierarchy MCU → mixed-signal microcontroller → 8-bit microcontroller → embedded semiconductor, providing sensor acquisition, control output, communications, and timing in one device. Its integrated analog peripherals reduce the need for separate ADC, DAC, and comparator components when board space or cost is important.
Key features include the 25 MHz processor performance, 64 kB program Flash, 4.25 kB RAM, 8-channel 10-bit ADC sampling at 100 ksps, 2-channel 12-bit DAC, and two comparators. Five 16-bit timers support precise timing, periodic control, and communication tasks. The verified distributor listing identifies the device in a 64-TQFP package measuring 10 mm by 10 mm.
The device architecture combines the established 8051 instruction set with analog-intensive peripherals in a mixed-signal system-on-chip design. The ADC and DAC provide conversion functions directly in the control loop, while comparators can support threshold detection and signal monitoring. The package provides 64 digital I/O pins according to the verified C8051F02x datasheet snippet, although exact pin assignments and package details should be confirmed against the manufacturer documentation.
Typical uses include industrial measurement and control, data acquisition, sensor-interface systems, analog signal conditioning, and compact embedded instruments. The 100 ksps ADC is suitable for many low-to-moderate-bandwidth acquisition tasks, while the DAC supports programmable analog output in test equipment and control systems.
A key design consideration is analog signal integrity. Place ADC inputs, DAC outputs, reference connections, and power pins according to the manufacturer layout guidance, keeping high-current switching paths away from sensitive analog traces and providing appropriate decoupling. The verified web data does not provide complete pinout, operating-temperature, supply-voltage, lifecycle, or compliance values, so those details require confirmation before production release.
드롭인 대체품: C8051F023 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: C8051F023 (동일 폼 팩터 및 풋프린트) — 차이점: ADC Resolution, Package, DAC Resolution, Core, Digital I/O Pins.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청C8051F023 최대 정격 & 전기적 특성
| Core | 8051, 8-bit |
| Processor Performance | 25 MHz |
| Program Flash | 64 kB |
| RAM | 4.25 kB |
| ADC Resolution | 10-bit |
| ADC Channels | 8 channels |
| ADC Sampling Rate | 100 ksps |
| DAC Resolution | 12-bit |
| DAC Channels | 2 channels |
| Comparators | 2 |
| Timers | 5 x 16-bit |
| Digital I/O | 64 pins |
| 패키지 | 64-TQFP, 10 mm x 10 mm |
| 실장 유형 | Surface mount |
| Device Type | Mixed-signal 8-bit microcontroller |
C8051F023 64-tqfp, 10 mm x 10 mm 핀 구성 가이드
C8051F023(64-tqfp, 10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F023.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F023 적합 용도: 6 애플리케이션s: Industrial Sensor Acquisition, Programmable Test and Measurement Equipment, Process Control and Automation, Embedded Data Logger, Analog Signal Conditioning System, Embedded Communication Gateway.
Industrial Sensor Acquisition
The C8051F023 fits industrial sensor-acquisition systems that need multiple analog inputs and local control without a separate MCU and ADC package. Its verified 8-channel, 10-bit ADC operates at up to 100 ksps, while the 25 MHz 8051 core can process readings and manage control logic. Two comparators can support threshold or limit detection when the application requires simple discrete decisions. The 64 kB Flash provides room for firmware, and 4.25 kB RAM supports acquisition buffers and control state. Confirm input impedance, sampling time, reference accuracy, and operating-temperature limits in the manufacturer datasheet before deploying it in a production instrument.
추천
Programmable Test and Measurement Equipment
The C8051F023 is suitable for compact test and measurement equipment that needs an ADC for reading sensors and a DAC for generating control or stimulus signals. The 10-bit, 8-channel, 100 ksps ADC supports low-to-moderate-speed measurements, while the 12-bit, 2-channel DAC provides programmable analog outputs. The integrated comparators can detect thresholds around measured signals, and the five 16-bit timers help organize sampling intervals and test timing. A 25 MHz control core allows calibration and communication functions to coexist in the same device. Validate DAC settling, ADC accuracy, reference drift, and analog output loading against the instrument specification.
추천
Process Control and Automation
The C8051F023 can serve as the local controller in a process-control subsystem that reads multiple analog process variables and produces analog control outputs. Its 8-channel ADC provides a single acquisition front end for pressure, temperature, level, or other slowly changing signals, while the dual DAC can drive analog setpoints or control references. The five 16-bit timers support periodic sampling, actuator updates, and communication timing. The integrated comparators are useful for detecting upper and lower limits without immediately involving software. For industrial deployment, verify the device's verified operating-temperature range, supply regulation, ESD requirements, and any required safety isolation before installation.
추천
Embedded Data Logger
The C8051F023 is appropriate for an embedded data logger that periodically samples analog channels and stores or transmits measurements. Its 25 MHz processor can manage acquisition scheduling, data formatting, communications, and control functions, while the 64 kB Flash can hold firmware and potentially nonvolatile configuration data. The ADC's verified 8-channel configuration permits multiplexing among multiple sensors, and the five 16-bit timers can create deterministic sampling periods. The 12-bit DAC is less central to logging but can support calibration or stimulus functions in a combined logger and test device. Check write endurance, data-retention, supply, and environmental requirements separately from the MCU specifications.
추천
Analog Signal Conditioning System
The C8051F023 can act as the digital controller in an analog signal-conditioning system where inputs must be digitized, compared against limits, and converted into controllable outputs. Its 10-bit ADC is suitable for many instrumentation signals, and the 12-bit DAC can produce calibration or adjustment voltages. Two comparators provide fast threshold information for over-range or alarm decisions. The 8051 core can implement compensation, filtering, configuration, and communications functions. The analog subsystem still depends on external sensor interfaces, reference design, amplifier selection, and board layout, so the MCU should be selected alongside—not instead of—proper analog front-end design.
추천
Embedded Communication Gateway
The C8051F023 can support an embedded gateway that gathers local measurements and coordinates communications between sensors or an instrument and a host. The integrated ADC and timers allow a device to sample and organize local analog data, while the 8051 core handles protocol processing and control state. The 64 kB Flash provides code storage for networking and application firmware, and the 4.25 kB RAM can support protocol buffers. The verified data identifies additional communication interfaces but does not enumerate them, so the exact UART, SPI, or other interface requirements must be checked in the datasheet. External transceivers and connectors may still be required for field-bus communication.
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F023 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 64-TQFP, 10 mm x 10 mm |
| Brand | Silicon Labs |
| Core | 8051, 8-bit |
| Processor Performance | 25 MHz |
| Program Flash | 64 kB |
| RAM | 4.25 kB |
| ADC | 10-bit, 8 channels, 100 ksps |
| DAC | 12-bit, 2 channels |
| Comparators | 2 |
| Timers | 5 x 16-bit |
| Digital I/O | 64 pins |
| Unit Price | $7.9587 as of 2026-10-23 |
주요 차별점
- Integrated mixed-signal resources (vs C8051F020)
- Analog acquisition density (vs C8051F021)
- Output control capability (vs C8051F022)
설계 노트
Reserve the C8051F023 footprint for the verified 64-TQFP, 10 mm x 10 mm package and route analog and digital signals according to the manufacturer pinout. Keep ADC inputs and DAC outputs away from high-current switching nodes and clock edges. Provide a continuous ground reference beneath the analog section where the board stack-up permits, and route the analog reference connection away from noisy digital return currents.
Do not select the power rails until the manufacturer datasheet confirms the C8051F023 supply-voltage range, current limits, sequencing, and decoupling requirements. The verified search results confirm a 25 MHz MCU and 64 kB Flash but do not provide complete operating-current or supply-range data. Use the official electrical-characteristics table and calculate regulator headroom for the highest processing and analog-conversion load before layout release.
The 8-channel, 10-bit ADC and dual 12-bit DAC can be sensitive to source impedance, sampling time, reference stability, and digital coupling. Confirm the acquisition requirements and maximum source impedance in the datasheet, place input conditioning components close to the relevant pins, and isolate high-speed digital routes from analog traces. Use averaging or oversampling only after verifying that the resulting bandwidth and latency meet the control-loop requirements.
Do not infer complete pin compatibility from the shared C8051F02x family name. The provided cross-reference results mention related C8051F020, C8051F021, and C8051F022 variants, but they do not verify that any of them is pin-to-pin drop-in compatible with C8051F023. Compare package dimensions, every pin function, supply limits, memory, peripheral resources, and software support before approving a substitution.
규정 준수 정보
The verified web data does not provide manufacturer statements for RoHS, REACH, lead-free status, halogen-free status, or conflict-minerals compliance. These fields remain unknown rather than assumed.
