C8051F305R - 8-Bit 25MHz 2KB Flash MCU | Silicon Labs (Tape & Reel)
부품 번호: C8051F305R ✗ 단종C8051F305R 개요
A microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripheral functions on one semiconductor die. The C8051F30x family belongs to the hierarchy 8051-compatible MCU, 8-bit microcontroller, mixed-signal MCU, embedded processor, and integrated circuit. Silicon Labs positions the C8051F305R as a compact device for applications requiring deterministic embedded control in a small PCB footprint.
The C8051F305R operates at up to 25 MHz and delivers processing performance of up to 25 MIPS. Its program memory consists of 2 KB of Flash organized for in-system reprogramming in 512-byte sectors. The manufacturer documentation states that no special off-chip programming voltage is required. This combination supports field-programmable firmware while conserving board area compared with larger microcontroller packages.
The device includes 256 bytes of RAM according to distributor product listings. Flash-based program memory provides a practical balance between firmware capacity and compact packaging for control-oriented products. Because the verified source data does not enumerate the peripheral set, pin-level functions, analog converter performance, oscillator options, or electrical limits, those specifications must be confirmed against the manufacturer datasheet before a new design is released.
Typical uses for the C8051F305R include compact industrial controllers, sensor-conditioning systems, programmable instrument modules, appliance controls, and embedded measurement products. The 11-QFN 3 x 3 mm option is especially useful when board area is constrained. Its 8051-compatible instruction set also allows engineers with established 8051 codebases to evaluate the device without immediately adopting a different software architecture.
Design work should begin by verifying the exact package variant, pin multiplexing, decoupling requirements, clock configuration, and programming interface in the C8051F30x documentation. The C8051F305R designation is available in more than one package option, so a PCB cannot be released from the family name alone. The selected orderable suffix must match the land pattern and pin count on the assembly drawing.
This page consolidates verified distributor specifications, package distinctions, family-level memory information, sourcing data, and application guidance. It also identifies the limits of the available evidence: detailed electrical characteristics and the complete pinout were not present in the supplied verified records and therefore are not presented as confirmed facts.
드롭인 대체품: C8051F305R — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
C8051F300-GMR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F301-GMR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F302-GMR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F303-GMR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F304-GMR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F305R 최대 정격 & 전기적 특성
| Microcontroller Type | 8-bit 8051-compatible mixed-signal MCU |
| 최대 클록 주파수 | 25 MHz |
| Maximum CPU Performance | 25 MIPS |
| Flash Program Memory | 2 KB |
| Program Memory Organization | 2K x 8 bits |
| RAM | 256 bytes |
| Programming Memory Sector Size | 512 bytes |
| Programming Method | In-system programming |
| Special Off-Chip Programming Voltage | None required |
| Package Option | 11-QFN (3 x 3 mm) |
| 실장 유형 | Surface mount |
| Package Pin Count | 11 pins |
| Core Architecture | Pipelined 8051-compatible core |
| Product Family | C8051F300/1/2/3/4/5 mixed-signal MCU family |
| RoHS 상태 | unknown |
| REACH Status | unknown |
C8051F305R 11 pins 핀 구성 가이드
C8051F305R(11 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F305R.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F305R 적합 용도: 6 애플리케이션s: Compact Industrial Controller, Sensor Conditioning Module, Programmable Measurement Instrument, Appliance Control Module, Communication Interface Adapter, Connected Embedded Control Node.
Compact Industrial Controller
The C8051F305R fits compact industrial control modules that require a deterministic 8051-compatible core, 25 MIPS performance, and in-system Flash programming without allocating a large PCB footprint. Its 11-QFN 3 x 3 mm package helps reduce board area, while the 256-byte RAM supports small state machines, input conditioning, and supervisory logic. The principal constraint is the 2 KB Flash limit, so firmware should be measured early and avoid unnecessary libraries. Use the -GM package drawing, verify the industrial temperature grade, and confirm that the selected suffix provides every required peripheral before releasing production hardware.
추천
Sensor Conditioning Module
The C8051F305R is appropriate for a small sensor-conditioning module where a microcontroller must digitize measurements, apply scaling, and expose status data through a serial interface. Its 25 MHz core provides enough instruction throughput for lightweight filtering and control, while 2 KB of Flash can hold compact firmware when the module has a narrow function. The 256-byte RAM requires careful buffering and may encourage a streaming architecture. Before selecting it for an analog-heavy design, verify ADC resolution, input count, acquisition timing, and pin multiplexing in the manufacturer datasheet because those details were not present in the supplied source records.
추천
Programmable Measurement Instrument
A programmable meter or compact measurement instrument can use the C8051F305R for acquisition control, calibration bookkeeping, command processing, and display updates. The 8051-compatible architecture is familiar to engineers maintaining legacy instrumentation, and in-system programming supports configuration updates without board removal. With only 2 KB of Flash and 256 bytes of RAM, the firmware should avoid large lookup tables and complex protocol stacks; moving those requirements into external memory may be necessary. Confirm the exact analog, timer, oscillator, and communication resources before committing to this device for a new measurement platform.
추천
Appliance Control Module
The C8051F305R can serve as the primary controller in a cost-sensitive appliance subsystem when the required functions fit within 2 KB of Flash. Typical duties include button-state scanning, motor or valve sequencing, timing, fault flags, and low-rate communications. Its 25 MIPS 8051-compatible core handles deterministic control logic, and the 11-QFN package preserves board space in compact products. The limited 256 bytes of RAM can support a small state machine but not large buffers. Validate worst-case timing, brownout behavior, operating temperature, and output-drive requirements against the manufacturer documentation before using it in a safety-relevant appliance function.
추천
Communication Interface Adapter
The C8051F305R is suitable for a small protocol-conversion or interface adapter when the task consists primarily of packet handling, status reporting, and configuration rather than intensive computation. Its 25 MHz core and in-system programmability allow firmware to be updated during production or field service, while the compact 11-QFN package suits densely populated equipment. Designers should keep protocol tables compact because only 2 KB of Flash is available. UART, SPI, I2C, and other interface availability must be confirmed for the exact package suffix, as the supplied evidence does not enumerate those peripheral resources.
추천
Connected Embedded Control Node
A compact control node can pair the C8051F305R with an external communications device to perform local sensing, actuation, and protocol translation. The microcontroller's 25 MIPS performance is appropriate for supervisory logic, while its small 11-QFN footprint helps keep the node compact. Designers should prefer a streaming architecture because the 256-byte RAM is the more restrictive resource for network buffering. The 2 KB Flash capacity also means that authentication, radio drivers, and buffering may require separate hardware. Verify the exact memory map, bootloader arrangement, package pins, and programming interface before integrating it with a wireless module.
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F305R — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | C8051F300-GMR | C8051F301-GMR | C8051F302-GMR | C8051F303-GMR | C8051F304-GMR |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 11-QFN (3 x 3 mm) | 11-QFN (3 x 3 mm) | 11-QFN (3 x 3 mm) | 11-QFN (3 x 3 mm) | 11-QFN (3 x 3 mm) | 11-QFN (3 x 3 mm) |
| Flash Memory | 2 KB | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB |
| Maximum CPU Performance | 25 MIPS | Up to 25 MIPS | Up to 25 MIPS | Up to 25 MIPS | Up to 25 MIPS | Up to 25 MIPS |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Core Architecture | Pipelined 8051-compatible core | 8051-compatible core | 8051-compatible core | 8051-compatible core | 8051-compatible core | 8051-compatible core |
| Programming Method | In-system programming | In-system programming | In-system programming | In-system programming | In-system programming | In-system programming |
| Programming Sector Size | 512 bytes | 512 bytes | 512 bytes | 512 bytes | 512 bytes | 512 bytes |
주요 차별점
- Smaller verified program footprint than the higher-memory family alternatives (vs C8051F304-GMR)
- Lower Flash demand than the 8 KB family members (vs C8051F301-GMR)
- Compact package option for space-constrained assemblies (vs C8051F305R-GS)
설계 노트
Do not treat the family name as a sufficient footprint specification. Verified listings show the C8051F305R in 11-QFN and 14-SOIC options, so the PCB land pattern must be selected from the exact orderable suffix. For the -GM 11-QFN device, use the manufacturer package drawing for pad dimensions, exposed-pad treatment, solder-mask clearance, and courtyard. Place the device where its ground and supply connections can follow the datasheet layout guidance without long return paths.
Budget the firmware and RAM before committing to this controller. The verified capacity is only 2 KB of Flash and 256 bytes of RAM, so table-driven algorithms, large protocol stacks, and buffered logging can exhaust resources quickly. Compile the final linked image rather than estimating source-code size, and avoid deep call chains or libraries that require substantial stack space. A same-family device with 4 KB or 8 KB of Flash may simplify the design if its additional pins and peripherals remain compatible.
The verified family documentation specifies in-system reprogramming in 512-byte sectors and states that no special off-chip programming voltage is required. Do not infer the complete programming connector or signal levels from that statement. Instead, follow the manufacturer programming hardware and procedure for the selected package, including reset timing, clock availability, and interface levels. Also verify that field updates preserve bootloader placement and do not overwrite a sector containing critical configuration data.
Keep power routing and decoupling consistent with the exact C8051F30x datasheet because the supplied records do not disclose the complete pinout or recommended capacitor values. Place required bypass capacitors close to their associated pins and provide a low-impedance ground reference. If an external communication device is used, separate its routing from sensitive measurement paths and keep programming or debug signals away from high-energy switching nodes to reduce coupling and unexpected resets.
규정 준수 정보
The supplied verified records do not contain explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields therefore remain unknown rather than being inferred from general distributor listings.
