C8051F331 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs
부품 번호: C8051F331 ✓ 활성C8051F331 개요
An 8051-compatible MCU is an embedded microcontroller whose instruction set and register organization are based on the Intel 8051 architecture. Within the product hierarchy, the C8051F331 belongs to the mixed-signal microcontroller family, combining digital control, Flash program memory, RAM, timers, serial interfaces, and analog conversion functions. This integration reduces the number of external components required in sensor-control, data-acquisition, and compact embedded-control designs.
The C8051F331 operates at up to 25 MHz and provides 25 MIPS of processing performance. Its 8 KB Flash memory supports an 8K by 8-bit program-memory organization, while 768 bytes of RAM accommodate working data and stack operations. Four 16-bit timers support periodic events, timing measurements, and communication baud-rate generation. The integrated I2C, SPI, and UART interfaces enable the controller to connect to sensors, converters, displays, and external processors through several common serial protocols.
The on-chip analog resources include an ADC, a DAC, and one comparator. These peripherals allow a design to acquire real-world inputs and produce an analog output without requiring separate converters. On-chip Power-On Reset, VDD monitoring, and watchdog functions support reliable startup and supervision. The manufacturer describes the C8051F331 as an ISP Flash MCU, supporting in-system programming for programming and updating the embedded firmware.
Typical uses include industrial sensor nodes, compact data-acquisition modules, motor and actuator controllers, temperature-measurement equipment, and communication-enabled embedded systems. Its small QFN-20 footprint supports compact assemblies, although the exposed-pad construction requires deliberate PCB layout and thermal management. Engineers should also account for the limited 8 KB program memory when sizing firmware and application protocols.
For a new PCB, use the manufacturer datasheet to confirm the exact exposed-pad dimensions, decoupling requirements, programming signals, and pin assignments. For an existing QFN-20 design, do not assume that another C8051F33x member is interchangeable; compare memory, analog peripherals, timers, I/O availability, and package details before substituting a device. Verified distributor pricing and a manufacturer product page are summarized below for engineering selection and procurement planning.
드롭인 대체품: C8051F331 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: C8051F331 (동일 폼 팩터 및 풋프린트) — 차이점: Package.
C8051F330-GM
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →C8051F320-GM
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
C8051F310-GM
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
C8051F313-GM
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F331 최대 정격 & 전기적 특성
| Device Type | Mixed-signal 8-bit microcontroller (MCU) |
| CPU Core | 8051-compatible core |
| 최대 클록 주파수 | 25 MHz |
| Processing Performance | 25 MIPS |
| Program Memory Size | 8 KB (8K x 8) Flash |
| RAM Size | 768 bytes (768 x 8) |
| Number of I/O Pins | 17 pins |
| Timer Count | 4 x 16-bit timers |
| ADC Resolution | 12-bit ADC |
| DAC Resolution | 12-bit DAC |
| Comparator Count | 1 comparator |
| Serial Interfaces | I2C, SPI, and UART |
| 패키지 | 20-VFQFN with exposed pad |
| Package Dimensions | 4 mm x 4 mm |
| 동작 온도 범위 | -40 C to +85 C |
| Program Memory Type | ISP Flash |
| Power-On Reset | On-chip Power-On Reset |
| Supply Monitoring | On-chip VDD monitor |
| Watchdog | On-chip watchdog |
| 실장 유형 | Surface mount |
C8051F331 4 mm x 4 mm 핀 구성 가이드
C8051F331(4 mm x 4 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F331.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F331 적합 용도: 6 애플리케이션s: Industrial Sensor Node, Compact Data-Acquisition Module, Motor and Actuator Controller, Temperature and Environmental Monitoring, Communication-Enabled Embedded Controller, Programmable Analog Signal Generator.
Industrial Sensor Node
The C8051F331 fits an industrial sensor node that must acquire analog measurements and communicate with a controller over a short serial link. Its 12-bit ADC and one comparator support direct sensing of temperature, pressure, level, or resistive bridges, while the 25 MHz 8051 core provides 25 MIPS for sampling, filtering, calibration, and alarm logic. I2C and SPI can connect local sensors and converters, while UART supports a host or service interface. Four 16-bit timers allow periodic sampling and communication timing. The main design constraint is the 8 KB Flash limit, which requires disciplined firmware sizing.
추천
Compact Data-Acquisition Module
The C8051F331 can form the core of a compact data-acquisition module requiring analog input, local processing, and digital output. The 12-bit ADC and 768 bytes of RAM support sampled measurements, while the 12-bit DAC can generate a reference or test output. I2C and SPI provide flexible links to sensors, memory, or converters, and the UART can export processed data to a host. At 25 MHz, the MCU can perform digital filtering and control tasks in real time. Designers should partition memory carefully because 8 KB of Flash must accommodate the application, interrupts, and boot requirements.
추천
Motor and Actuator Controller
The C8051F331 is suitable for compact motor or actuator control where timing precision, mixed sensing, and serial diagnostics are valuable. Its four 16-bit timers can organize PWM-related tasks, input capture, periodic control, and communication timing, while the comparator and ADC can monitor position sensors, current signals, or analog feedback. The 25 MHz core supports deterministic supervisory logic, and I2C, SPI, and UART allow configuration and status reporting. The 8 KB program-memory ceiling should be checked against the chosen control algorithm and safety features before implementation.
추천
Temperature and Environmental Monitoring
The C8051F331 supports temperature and environmental monitoring by combining a 12-bit ADC with programmable digital peripherals and serial communications. A sensor conditioned into the ADC input range can be sampled at a rate determined by the application, while the comparator can provide a fast threshold function when appropriate. The UART, SPI, or I2C interface can report measurements to a display, logger, or remote controller. On-chip Power-On Reset, VDD monitoring, and a watchdog improve system supervision after startup, although their detailed thresholds and timing limits must be taken from the manufacturer datasheet.
추천
Communication-Enabled Embedded Controller
The C8051F331 works well as a communication-enabled embedded controller when a board needs local control plus several standard serial interfaces. UART can connect to a host computer or radio module, I2C can operate sensors and configuration devices, and SPI can provide higher-speed access to converters or displays. The four 16-bit timers support baud-rate generation, frame timing, and periodic background tasks. With 8 KB Flash and 768 bytes of RAM, the device is best suited to compact protocol stacks and focused control tasks rather than large networking stacks or graphical user interfaces.
추천
Programmable Analog Signal Generator
The C8051F331 can generate and monitor controlled analog signals because it combines a 12-bit DAC, a 12-bit ADC, and a comparator with a 25 MHz processor. A firmware-defined waveform, reference level, or excitation signal can be produced through the DAC, measured through the ADC, and checked by the comparator for threshold behavior. Serial interfaces permit parameter updates and result retrieval. Because the confirmed RAM is only 768 bytes, larger waveform tables should be streamed or generated algorithmically, and analog output filtering and reference design should follow the manufacturer guidance.
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F331 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | C8051F330-GM | C8051F320-GM | C8051F310-GM | C8051F313-GM |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 20-VFQFN with exposed pad (4 mm x 4 mm) | 20-VFQFN with exposed pad (4 mm x 4 mm) | 20-VFQFN with exposed pad (4 mm x 4 mm) | 20-VFQFN with exposed pad (4 mm x 4 mm) | 20-VFQFN with exposed pad (4 mm x 4 mm) |
| CPU Core | 8051-compatible core | 8051-compatible core | 8051-compatible core | 8051-compatible core | 8051-compatible core |
주요 차별점
- Integrated mixed-signal conversion resources (vs C8051F313-GM)
- Four dedicated 16-bit timing resources (vs C8051F320-GM)
- Three integrated serial communication interfaces (vs C8051F310-GM)
- Confirmed program and working-memory configuration (vs C8051F330-GM)
설계 노트
Use the official C8051F331 land pattern and exposed-pad geometry rather than a generic 20-VFQFN footprint. The verified package is 4 mm by 4 mm, so courtyard, paste, and solder-mask definitions must be checked against the manufacturer drawing. Confirm whether the exposed pad is connected to ground or another net, then assign the appropriate copper and via pattern. A no-net or incorrectly connected pad can compromise thermal performance, assembly yield, or EMC behavior.
Provide the manufacturer's recommended local supply decoupling and route high-current return paths without forcing analog return current through sensitive input areas. The verified snippets identify an on-chip VDD monitor but do not provide the operating-voltage range, capacitor values, or power-consumption figures, so those values must not be guessed. Review the complete electrical table for operating voltage, startup current, and regulator requirements before finalizing the power tree and bulk-capacitor selection.
Keep ADC inputs, comparator inputs, and the DAC output away from switching nodes and high-current return paths. Use a continuous ground reference beneath the analog circuitry, minimize loop area, and follow the manufacturer's analog-layout guidance. Because the supplied data does not expose individual pin assignments, verify whether adjacent pins can be used for guard rings or isolation. Any filtering network should also be checked against the ADC acquisition requirements and the 25 MHz processing budget.
Do not treat the C8051F331, C8051F331-GM, and C8051F331-GMR labels as interchangeable at the ordering level. The verified distributor records use the -GM and -GMR suffixes for the 20-VFQFN package, while the base family MPN is also used in product listings. Confirm the full orderable MPN, reel configuration, exposed-pad requirements, and programming compatibility. Likewise, verify every same-family alternative because shared package dimensions do not establish identical pin functions or peripheral availability.
규정 준수 정보
The supplied verified web data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The -40 C to +85 C operating range is confirmed by the LCSC listing but does not establish automotive qualification.
