Texas Instruments

CD4067BPW - 16:1 CMOS Analog Multiplexer | Texas Instruments

부품 번호: CD4067BPW ✓ 활성
3 V to 18 V Vdss 100 microamperes Id 125 ohms typical Rds(on) 24-pin TSSOP Package
MOQ: 1 |

CD4067BPW 개요

Texas Instruments CD4067BPW is a single-channel 16:1 CMOS analog multiplexer and demultiplexer with a typical ON resistance of 125 ohms, a maximum specified value of 240 ohms, and operation from 3 V to 18 V in a 24-pin TSSOP package. It routes one common analog terminal to any of 16 channels through four binary address inputs.

An analog multiplexer is a semiconductor switching network that combines multiple signal paths into a shared input or output. The CD4067B belongs to the CMOS analog switch, multiplexer, and demultiplexer hierarchy, where its bidirectional switch paths can distribute analog signals in either direction. On-chip binary decoding reduces the external control logic required to select one of 16 channels, making the device useful for data acquisition, test systems, and signal-routing equipment.

The principal electrical features include a 20 V maximum supply rating, 3 V to 18 V operating supply range, 125-ohm typical ON resistance, and 240-ohm maximum ON resistance. The typical ON resistance falls to 5 ohms when VDD minus VSS is 15 V. Typical quiescent power dissipation is listed as 0.2 microwatts at a 10 V supply, while a distributor specification lists quiescent current at 100 microamperes.

The CD4067B uses four address inputs to decode one of 16 channels. A common inhibit and an enable control govern whether the selected path is active. Its CMOS switch architecture supports bidirectional signal routing, allowing the same device to function either as a multiplexer or a demultiplexer. The result is a compact analog routing element for systems that need more input or output channels than the controlling converter directly provides.

Typical applications include multiplexed sensor acquisition, automated test-equipment routing, data-converter channel selection, sample-and-hold systems, and industrial control interfaces. The device is especially useful when several low-bandwidth or moderate-bandwidth analog signals must share a downstream ADC, amplifier, measurement front end, or communications interface.

Designers should verify signal amplitude against the supply rails, account for ON resistance when calculating source-load attenuation, and use the enable and inhibit controls to prevent unintended channel selection. Decoupling capacitors should be placed close to the supply pins, while sensitive signals require short, guarded routing to minimize coupling into the high-impedance control paths.

This product page combines the manufacturer and distributor specifications with practical routing guidance, pin-location guidance, package details, and a parameter-by-parameter comparison of documented drop-in alternatives for faster engineering selection.

드롭인 대체품: CD4067BPW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

CD4067BPWG4

✅ 드롭인
📦 24-pin TSSOP
Same 16:1 configuration and 24-pin TSSOP footprint; ordering and environmental-grade details require confirmation

📋 참조 대체품 (카탈로그에 없음)

CD4067BPWRG4

✅ 드롭인
📦 24-pin TSSOP
Same 16:1 configuration and 24-pin TSSOP footprint; ordering, marking, and temperature-grade details require confirmation

📋 참조 대체품 (카탈로그에 없음)

CD4067BPW 사양

Multiplexer Configuration 1 x 16:1
Number of Channels 16 channels
Multiplexer Type Single-channel analog multiplexer/demultiplexer
Supply Voltage Range 3 V to 18 V
Maximum Supply Voltage 20 V
ON Resistance 125 ohms typical
Maximum ON Resistance 240 ohms
ON Resistance at VDD - VSS = 15 V 5 ohms typical
대기 전류 100 microamperes
Quiescent Power Dissipation 0.2 microwatts typical at VDD - VSS = 10 V
Address Inputs 4 binary address inputs
Signal Routing Bidirectional
패키지 24-pin TSSOP
실장 유형 Surface mount
Shipping Package Tube

CD4067BPW tube 핀 구성 가이드

CD4067BPW(tube 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

CD4067BPW의 tube 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: CD4067BPW.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

CD4067BPW 적합 용도: 6 애플리케이션s: Multiplexed Sensor Acquisition, Automated Test Equipment Routing, Data Converter Channel Selection, Industrial Control Signal Routing, Sample-and-Hold Signal Selection, Programmable Signal Distribution.

🧩

Multiplexed Sensor Acquisition

The CD4067BPW fits sensor-frontend designs that must bring up to 16 analog inputs into one shared ADC or instrumentation amplifier. Its four address inputs allow a microcontroller to select a channel without operating 16 separate analog switches, while the 125-ohm typical ON resistance is useful for moderate-impedance sources. Account for the maximum 240-ohm resistance when driving high-impedance sensors, and place a buffer near the sensor if source impedance or ADC settling time is high. The enable and inhibit controls can also isolate the mux during sensor-settle or calibration intervals.

🖥️

Automated Test Equipment Routing

The CD4067BPW is useful in automated test equipment where a controller must route one of 16 test or measurement paths to a common measurement channel. Its 16:1 organization provides more routing density than an eight-channel multiplexer, and the integrated address decoder simplifies control sequencing. Route sensitive test nodes carefully because the ON resistance can introduce attenuation and thermal noise, while long PCB traces may couple interference into high-impedance inputs. The bidirectional switch paths also support signal routing in either direction.

📟

Data Converter Channel Selection

The CD4067BPW can connect several conditioned analog inputs to a shared data-converter input, reducing the number of external routing components required by the system. The 16:1 architecture is particularly effective for sensor, diagnostic, or industrial-control channels that do not require simultaneous high-bandwidth sampling. Account for the mux's maximum 240-ohm ON resistance when budgeting source impedance, ADC acquisition time, and gain error. A local buffer near the multiplexer output can isolate the ADC sample-and-hold input during switching transitions.

🏭

Industrial Control Signal Routing

The CD4067BPW supports industrial control systems that distribute control, feedback, or diagnostic signals across a shared analog bus. Its 3 V to 18 V operating range accommodates common supply arrangements, and on-chip address decoding allows straightforward selection from a microcontroller or programmable counter. Design the signal path so its common and channel terminals remain within the device's valid analog range. For safety-critical isolation, keep the CD4067BPW on the non-isolated field side and use appropriately rated isolation components at the system boundary.

📊

Sample-and-Hold Signal Selection

The CD4067BPW can select one of 16 source signals for a sample-and-hold stage when several slowly changing or multiplexed measurements share one amplifier path. Its typical ON resistance of 125 ohms is low enough for many conventional sample-and-hold networks, but designers should include switch resistance in the acquisition-time and droop calculations. Use the inhibit and enable controls to command a defined settling interval after changing the four address bits. For fast-moving inputs, verify bandwidth and charge-injection requirements against the manufacturer switching data.

🔧

Programmable Signal Distribution

The CD4067BPW works in programmable signal-distribution systems that route one of 16 sources to a shared destination under digital control. Because the switch paths are bidirectional, the same architecture can support source selection or signal distribution according to the board topology. The integrated four-bit address decoder reduces external decoding logic, while the compact 24-pin TSSOP supports dense control boards. Keep supply decoupling close to VDD and VSS, provide a defined logic reference, and avoid driving the address, enable, or inhibit inputs beyond their specified voltage limits.

What is the CD4067BPW?
The CD4067BPW is a single-channel 16:1 CMOS analog multiplexer and demultiplexer from Texas Instruments. According to the Texas Instruments CD4067B product page, it uses four binary address inputs to select one of 16 common signal paths and is packaged in a 24-pin TSSOP. Its 3 V to 18 V supply range, bidirectional switching capability, and integrated address decoding make it suitable for analog routing, data acquisition, test systems, and signal-distribution designs.
What is the operating voltage of CD4067BPW?
The CD4067BPW operates from 3 V to 18 V, with a maximum supply rating of 20 V. The Texas Instruments CD4067B product page identifies the device as a 20 V 16:1 analog multiplexer, while distributor specifications list the 3 V to 18 V operating range. Designers should keep signal amplitudes within the usable input and output range and maintain sufficient supply voltage for the selected switch path to turn on correctly.
What is the on-resistance of CD4067BPW?
The CD4067BPW has a typical ON resistance of 125 ohms and a maximum specified value of 240 ohms. According to the CD40x7B datasheet information, ON resistance decreases to approximately 5 ohms when VDD minus VSS is 15 V. This voltage-dependent behavior matters in precision analog paths because source resistance can combine with the mux resistance to create divider action and add gain error.
Where can I download the CD4067BPW datasheet PDF?
The official CD4067BPW datasheet can be accessed through the Texas Instruments CD4067B product page at https://www.ti.com/product/CD4067B. The product page links to the manufacturer documentation and describes the device as a 20 V, 16:1, one-channel analog multiplexer. Use the manufacturer document for the authoritative pin-description table, switching characteristics, operating limits, and application guidance before assigning PCB tracks.
Where can I find the CD4067BPW pinout?
The CD4067BPW pin assignment is published in the Texas Instruments CD40x7B datasheet, which is linked from the official CD4067B product page. The component uses a 24-pin TSSOP package. Because a complete numbered pin list is not reproduced in the product summary, use the datasheet pin-description table to identify the common terminal, individual channels, address inputs, enable, inhibit, and supply terminals before laying out the board.
How does the CD4067BPW select one of 16 channels?
The CD4067BPW selects a channel through four binary address inputs and its on-chip binary decoder. Applying the address code selects one of 16 common paths, while the enable and inhibit controls govern whether that path is active. According to the manufacturer CD40x7B documentation, integrated decoding reduces the external logic needed for channel selection, allowing a microcontroller or counter to control the analog routing network directly.
Can CD4067BPW be used as a demultiplexer?
Yes, the CD4067BPW can operate as either an analog multiplexer or demultiplexer because its CMOS switch paths are bidirectional. In multiplex mode, one common terminal connects to a selected channel; in demultiplex mode, the direction of signal flow through the selected path is reversed. The Texas Instruments CD4067B product page identifies the device as an analog multiplexer and demultiplexer.
What is the difference between CD4067BPW and CD4097BPWRE4?
The CD4067BPW selects among 16 analog channels, whereas the CD4097BPWRE4 selects among eight channels. Both are described in 24-pin TSSOP packages, but their address inputs, channel counts, and internal configurations are different, so they are not pin-to-pin drop-in replacements. Use the CD4067BPW when sixteen paths are required; use the CD4097 family only when eight-way routing satisfies the design and its pinout is matched separately.
When should I choose CD4067BPW over an 8-channel analog multiplexer?
Choose the CD4067BPW when the design must route one of sixteen analog signals through a shared front end. Its four address inputs and integrated decoder provide more channel density than the eight-channel CD4097 family, while its typical 125-ohm ON resistance remains suitable for many moderate-impedance acquisition paths. Choose an eight-channel multiplexer instead when only eight paths are needed and its lower control complexity provides a better fit.
What can replace CD4067BPW?
The documented same-footprint replacement candidates are CD4067BPWG4 and CD4067BPWRG4, both manufactured by Texas Instruments and identified in the 24-pin TSSOP format. Their documented configuration remains 16:1, but designers should compare ordering codes, marking, temperature grade, and lifecycle status before substitution. The Request a Quote form on this page can be used to request the current availability of the exact replacement part.
Is CD4067BPW suitable for sensor acquisition?
The CD4067BPW is suitable for multiplexed sensor acquisition when the sensor signals, bandwidth, and input impedance are compatible with its switch characteristics. Its 16-channel configuration allows multiple sources to share an ADC or measurement amplifier, but the maximum 240-ohm ON resistance can affect high-impedance sources. Use a buffer near the source if settling time or source impedance becomes significant.
How much power does CD4067BPW consume?
The CD4067BPW quiescent power dissipation is listed as 0.2 microwatts typical when VDD minus VSS is 10 V, and a distributor specification lists quiescent current as 100 microamperes. These figures describe the static device consumption; total supply current also depends on the supply voltage and the number of active switch paths. According to the CD40x7B documentation, the device is tested for quiescent current over the package-temperature range.
What are the key specifications of CD4067BPW that engineers should know?
The key CD4067BPW specifications are a 16:1 configuration, 3 V to 18 V operating supply, 20 V maximum supply rating, 125-ohm typical ON resistance, 240-ohm maximum ON resistance, and four binary address inputs. The device is available in a 24-pin TSSOP package. Texas Instruments describes the part as a 20 V, single-channel analog multiplexer with integrated binary address decoding.
Where to buy CD4067BPW online?
The CD4067BPW can be requested through the Request a Quote form on this page, which provides a direct route for current commercial availability, volume pricing, and lead-time confirmation. The part is identified in commercial channels as a Texas Instruments 24-pin TSSOP analog multiplexer. Submit the exact MPN CD4067BPW so the request is matched to the correct device rather than a related 16-channel package variant.
How much does CD4067BPW cost and what is its lead time?
Use the Request a Quote form on this page for the current commercial terms, volume pricing, stock status, and lead time for CD4067BPW. Commercial terms can change with quantity, inventory, and supply conditions, so a quote request provides the appropriate transaction path. Identify the required 24-pin TSSOP orderable MPN and any acceptable alternatives when submitting the request.
Is CD4067BPW in stock?
Current stock status for CD4067BPW should be confirmed through the Request a Quote form on this page because inventory is quantity- and date-dependent. The commercial listing identifies the part as a 24-pin TSSOP device from Texas Instruments. Submit the exact MPN and required quantity so the response reflects the current orderable configuration, including tube or reel packaging requirements.

엔지니어링 참조 데이터: CD4067BPW — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the CD4067BPW when a design requires a 16-channel analog multiplexer or demultiplexer in a 24-pin TSSOP package and its 3 V to 18 V supply range matches the system. It is particularly suitable for sensor acquisition, automated test routing, data-converter channel selection, and programmable signal-distribution systems. Account for the maximum 240-ohm ON resistance when driving high-impedance sources, and add a buffer or longer acquisition interval when necessary. CD4067BPWG4 and CD4067BPWRG4 are documented same-footprint candidates, but ordering, marking, environmental-grade, and lifecycle details should be confirmed before substitution. Do not select the CD4097BPWRE4 as a drop-in replacement: although it also uses a 24-pin TSSOP package, it provides eight channels rather than sixteen and has a different internal configuration and pin assignment.

대체품과의 비교

파라미터 이 제품 CD4067BPWG4 CD4067BPWRG4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 24-pin TSSOP 24-pin TSSOP - same package 24-pin TSSOP - same package
Multiplexer Configuration 1 x 16:1 1 x 16:1 1 x 16:1
Number of Channels 16 channels 16 channels 16 channels
Address Decoding On-chip binary decoding On-chip binary decoding On-chip binary decoding

주요 차별점

  • Higher routing density in the same TSSOP footprint (vs CD4097BPWRE4)
  • Bidirectional multiplexer and demultiplexer operation (vs CD4097BPWRE4)
  • Integrated binary address decoding (vs CD4067BPWG4)

설계 노트

Do not treat the maximum 240-ohm ON resistance as a constant value across all supply conditions; the manufacturer information lists 125 ohms typical and approximately 5 ohms typical at a 15 V VDD-minus-VSS difference. Include the actual switch resistance in source impedance, ADC settling-time, and gain-error calculations. For high-impedance sensors, add a nearby buffer rather than allowing the mux resistance to dominate the signal path.

Place the supply bypass capacitor directly between VDD and VSS pins, with a short ground return, and keep the common and selected-channel routes away from clock, address, and high-current switching nodes. Although the chip has integrated address decoding, the four address inputs still require clean return paths. Use a solid ground plane and avoid routing sensitive analog channels beneath digital control traces where coupling could disturb the selected measurement.

Allow the analog path to settle after changing the address code before capturing a sample. Account for the mux ON resistance together with the capacitance of the downstream node and the source impedance of the selected signal. When multiplexing high-frequency or large-amplitude signals, verify the signal amplitude against the supply limits and consult the manufacturer switching-characteristics table before selecting sampling timing.

Use the enable and inhibit controls to place the mux in a defined state during reset, configuration, and measurement transitions. Ensure every address, enable, and inhibit signal remains within the valid logic-input range referenced to VSS. Keeping unused or sensitive channels in a controlled state reduces accidental signal injection and makes system behavior more predictable during startup and fault recovery.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the exact orderable MPN. AEC-Q100 is not applicable because CD4067BPW is an industrial CMOS analog multiplexer rather than an automotive-qualified device.

관련 검색

CD4067BPW datasheet CD4067BPW pinout CD4067BPW datasheet pdf CD4067BPW equivalent CD4067BPW replacement CD4067BPW cross reference CD4067BPW vs CD4097BPWRE4 CD4067BPW 24-TSSOP pinout CD4067BPW 16 channel multiplexer CD4067BPW sensor acquisition CD4067BPW price CD4067BPW stock

관련 부품 & 용어

Texas Instruments CD4067BPW CD4067B CD4067BPWG4 CD4067BPWRG4 CD4097BPWRE4 analog multiplexer analog demultiplexer CMOS analog switch 16:1 multiplexer binary address decoder bidirectional switch ON resistance quiescent current quiescent power dissipation TSSOP-24 TSSOP package family surface-mount package SMD data acquisition automated test equipment industrial control sample-and-hold signal routing semiconductor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기