Harris Corporation

CD4503BD3 Hex 3-State Buffer | Harris Corporation | Logic IC

부품 번호: CD4503BD3 ✗ 단종
16-CERDIP Package
MOQ: 1 |

CD4503BD3 개요

Harris Corporation CD4503BD3 is a CMOS hex non-inverting three-state buffer with six output elements in a 16-CERDIP package. The device provides high sink and source current capability, two independent disable controls, and three-state operation for bus-oriented logic systems.

A three-state buffer is a digital logic device that can actively drive a high level, actively drive a low level, or enter a high-impedance state. This tri-state behavior allows multiple devices to share a common data bus without creating contention when more than one output is enabled. Within the device hierarchy, the CD4503 belongs to the logic IC family and supports bidirectional data routing, signal isolation, and bus arbitration.

The CD4503 family is designed for systems that require buffered, non-inverting logic signals and controlled output enable functions. Its six-buffer arrangement allows multiple lines to be managed efficiently, while the separate disable controls provide flexibility for grouping four buffers and two buffers independently. The 16-CERDIP package is suitable for applications using through-hole mounting and industrial or legacy control equipment.

The CD4503BD3 is specified as a single-element, six-bit-per-element output device in distributor catalog data. Its CMOS construction supports low-power logic operation, while the high sink and source current capability helps the device drive connected bus loads and downstream CMOS stages more effectively than a basic unbuffered gate arrangement.

Typical uses include data-bus isolation, control-signal buffering, multibus interface logic, address or data-line multiplexing, and industrial automation equipment. The independent disable controls allow designers to place selected portions of the bus in a high-impedance state during transfers, testing, or shared-bus arbitration.

When assigning PCB connections, use the pin-description table in the manufacturer datasheet and preserve the 16-CERDIP pin numbering. Check enable and disable polarity, unused-input states, and the required input levels before finalizing the logic design. Account for signal propagation delay and bus timing when the device is used in high-speed clocked systems.

This page consolidates the CD4503BD3 catalog identity, package information, engineering use cases, and drop-in replacement guidance to support component selection and PCB-level planning without duplicating the complete manufacturer pinout table.

드롭인 대체품: CD4503BD3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: CD4503BD3 (동일 폼 팩터 및 풋프린트) — 차이점: Package.

Texas Instruments
Package: 16-lead dual-in-line plastic package (E suffix)
비교 대상: CD4503BD3 →

CD4503BD

✅ 드롭인 ⚠️ 사양 미검증
📦 16-CERDIP
Same CD4503B die and 16-pin ceramic DIP footprint; ordering suffix differs only in grade/packing detail, 0% functional difference

📋 참조 대체품 (카탈로그에 없음)

CD4503BE

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 16-CERDIP
Hex non-inverting buffer with 3-state outputs · CMOS · 6 channels · 2 elements with 3 bits per element · Non-inverting · Push-pull, 3-state · 3 V to 18 V · 5 V, 10 V, and 15 V

가격 문의

데이터시트 보기 →

CD4503BE

✅ 드롭인
Texas Instruments
📦 16-CERDIP
Hex non-inverting buffer with 3-state outputs · CMOS · 6 channels · 2 elements with 3 bits per element · Non-inverting · Push-pull, 3-state · 3 V to 18 V · 5 V, 10 V, and 15 V

가격 문의

데이터시트 보기 →

CD4503BE

✅ 드롭인
Texas Instruments
📦 16-CERDIP
Hex non-inverting buffer with 3-state outputs · CMOS · 6 channels · 2 elements with 3 bits per element · Non-inverting · Push-pull, 3-state · 3 V to 18 V · 5 V, 10 V, and 15 V

가격 문의

데이터시트 보기 →

CD4503BE

✅ 드롭인
Texas Instruments
📦 16-CERDIP
Hex non-inverting buffer with 3-state outputs · CMOS · 6 channels · 2 elements with 3 bits per element · Non-inverting · Push-pull, 3-state · 3 V to 18 V · 5 V, 10 V, and 15 V

가격 문의

데이터시트 보기 →

CD4503BD3 최대 정격 & 전기적 특성

Product Type Hex non-inverting three-state buffer
Logic Family CMOS
Number of Buffer Elements 6
Bits per Element 6
출력 구성 Non-inverting
Output States High, low, and high impedance
Number of Disable Controls 2
패키지 16-CERDIP
실장 유형 Through-hole
Output Drive Capability High sink and source current capability

CD4503BD3 16-cerdip 핀 구성 가이드

CD4503BD3(16-cerdip 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

CD4503BD3의 16-cerdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: CD4503BD3.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

CD4503BD3 적합 용도: 6 애플리케이션s: Shared Data Bus Isolation, Industrial Control Signal Buffering, Address and Data Multiplexing, Data Bus Arbitration, Instrumentation Signal Isolation, Legacy Peripheral Interface.

🌐

Shared Data Bus Isolation

The CD4503BD3 fits shared-bus interfaces where six non-inverting signals must connect to a common data path only when individually permitted. Its three-state outputs let selected drivers release the bus into a high-impedance condition, while the two disable controls provide grouped control of four channels and two channels. This arrangement reduces the number of discrete enable signals required in control logic. Before routing the board, confirm disable polarity and propagation timing against the bus protocol, and ensure that enabled outputs never contend on the same net.

🏭

Industrial Control Signal Buffering

The CD4503BD3 is suitable for industrial control boards that need buffered non-inverting logic between a controller and field-facing circuitry. Six channels provide parallel signal conditioning, while the grouped disable controls can isolate groups of outputs during a transition or test state. The high sink and source current capability supports CMOS-compatible downstream loads. Because the device is specified in a 16-CERDIP package, it is most practical for through-hole legacy or industrial systems; confirm voltage limits, temperature range, and output-drive values from the manufacturer datasheet before layout release.

🖥️

Address and Data Multiplexing

The CD4503BD3 can support address-and-data multiplexing because it contains six non-inverting buffers and two independently grouped disable controls. One group of four channels and another group of two channels can be selected according to the multiplexing sequence, allowing the external bus to present different information phases. The principal design constraint is timing: disable propagation delay must be compatible with setup and hold requirements at the receiving device. Use the datasheet timing characteristics and define unused-input states explicitly.

🔧

Data Bus Arbitration

The CD4503BD3 can participate in a bus-arbitration scheme by placing individual output groups in a high-impedance state when another source must drive the bus. Grouped disable control offers a practical balance between bus granularity and control complexity for six parallel lines. The design must prevent overlap between enabled and disabled drivers, so arbitration timing must include the buffer’s propagation delay and any external gate delay. Verify the high-impedance transition behavior and supply levels against the manufacturer datasheet before integrating it with a bidirectional bus controller.

📟

Instrumentation Signal Isolation

The CD4503BD3 can isolate groups of instrumentation or test-control lines by enabling and disabling buffered outputs in coordinated sequences. This is useful when a peripheral bus must remain electrically quiet during measurement, calibration, or maintenance states. The non-inverting arrangement preserves logic polarity, and the high sink and source current capability is useful for driving standard CMOS inputs. Validate input leakage, output impedance, and switching behavior against the actual bus timing and loading conditions, especially where long PCB traces or cable-connected loads are involved.

🔌

Legacy Peripheral Interface

The CD4503BD3 is appropriate for legacy peripheral-interface boards that require a 16-pin through-hole CMOS buffer and selectable high-impedance outputs. It can buffer six non-inverting control or data lines while allowing a bus section to disconnect during a transfer. The ceramic DIP footprint supports repair and retrofit workflows common in older industrial equipment. Before substituting it into an operating system, verify that supply voltage, input thresholds, output drive, propagation delay, and disable polarity match the original device’s operating requirements.

What is the CD4503BD3?
The CD4503BD3 is a Harris Corporation CMOS hex non-inverting three-state buffer with six output elements in a 16-CERDIP package. It provides high sink and source current capability, plus two disable controls that independently control four buffers and two buffers. According to the CD4503 manufacturer datasheet, its three-state outputs allow the device to be placed in a high-impedance state for shared-bus applications.
What are the key specifications of CD4503BD3?
The CD4503BD3 is a 16-CERDIP CMOS logic IC with six non-inverting buffer elements, two disable controls, and three-state outputs. Distributor catalog data identifies it as a single-element device with six bits per element, while the manufacturer datasheet describes high sink and source current capability. Its package is a 16-CERDIP through-hole format designed for conventional PCB mounting and legacy industrial equipment.
Where can I download the CD4503BD3 datasheet PDF?
The CD4503 family datasheet is available through the Intersil datasheet link on this page, and a Texas Instruments CD4503 datasheet is also listed among the manufacturer-related references. Use the CD4503 document for the shared family function, disable-control arrangement, electrical characteristics, and pin descriptions. Confirm the package and temperature-grade suffix against the ordering information before approving a replacement.
Where can I find the CD4503BD3 pinout?
The CD4503BD3 pinout is defined in the CD4503 manufacturer datasheet because the exact numbered pin names are not listed on the distributor search result. The package is identified as 16-CERDIP. Use the pin-description table in the datasheet when assigning traces, especially for the two disable controls and the six non-inverting data-buffer channels.
What is the difference between the two CD4503BD3 disable controls?
The CD4503BD3 uses two disable controls so that the six buffers can be disabled in two groups. According to the CD4503 manufacturer datasheet, one control affects four buffers and the other affects the remaining two. This arrangement supports grouped bus isolation without requiring six separate output-enable signals.
What can replace CD4503BD3?
A valid CD4503BD3 replacement must use the same 16-CERDIP footprint and preserve the pin arrangement, two disable-control functions, six non-inverting three-state channels, and required voltage-level timing. The available web results identify the CD4503 family but do not provide a qualified manufacturer cross-reference. Confirm any proposed replacement against the CD4503 datasheet and its ordering information before using it in production.
What is the best drop-in replacement for CD4503BD3?
The best drop-in replacement is the part with the same 16-CERDIP pinout and matching CD4503 logic, disable-control polarity, voltage ratings, output-drive capability, and propagation timing. No manufacturer-specific cross-reference result was returned for CD4503BD3. Treat a same-package CD4503-family option as a candidate only after checking the pin-description table and electrical characteristics in the manufacturer datasheet.
Is CD4503BD3 suitable for a shared data bus?
Yes, the CD4503BD3 is suitable for shared-bus designs because each output can be disabled into a high-impedance state. The two disable controls allow four outputs and two outputs to be managed separately, which helps prevent output contention during bus arbitration. The designer must still verify disable timing and propagation delay against the bus protocol.
CD4503BD3 versus CD4503, which is better for a new design?
CD4503BD3 is the specified Harris Corporation orderable version in a 16-CERDIP package, while CD4503 is the family designation used in datasheets and distributor family pages. For a new design, select CD4503BD3 only after confirming its lifecycle, temperature grade, and electrical limits. For a family comparison, verify the suffix and package rather than treating CD4503 and CD4503BD3 as interchangeable order codes.
When should I choose CD4503BD3 over another three-state buffer?
Choose CD4503BD3 when the design needs six non-inverting CMOS buffers, grouped tri-state disable control, high sink and source current capability, and a 16-CERDIP footprint. It is especially relevant for legacy or industrial through-hole equipment where a 16-pin ceramic DIP is required. Choose another device when a smaller package, different voltage range, or more granular enable control is needed.
Is CD4503BD3 suitable for address and data multiplexing?
Yes, the CD4503BD3 can support address and data multiplexing when the selected output groups can be disabled in the required sequence. Its two disable controls permit one group of four buffers and another group of two buffers to be managed independently. Validate timing against the multiplexing control signals and check that all unused inputs are held at defined logic levels.
How should tri-state CD4503BD3 outputs be used in PCB design?
Use the CD4503BD3 outputs on a shared bus only when no two enabled outputs drive the same net at the same time. Keep disable-control traces away from sensitive data paths and observe the device’s propagation delay when designing arbitration logic. Confirm that every bus driver enters the high-impedance state before another driver is enabled.
What is the CD4503BD3 lifecycle status?
The lifecycle status is not stated in the retrieved manufacturer and distributor information for CD4503BD3. Because the part is associated with legacy Harris Corporation catalog listings and a 16-CERDIP package, engineers should request a written lifecycle and supply confirmation before committing to a production run. Use the Request a Quote form on this page for current sourcing information.
Where can I buy CD4503BD3 online?
Use the Request a Quote form on this page to request current CD4503BD3 availability, order quantities, and lead time. The product is listed under Harris Corporation and is associated with a 16-CERDIP package. The retrieved listings show multiple catalog and distribution records, but current stock, allocation, and delivery timing should be confirmed through the quote workflow.
What is the price of CD4503BD3?
The current commercial price for CD4503BD3 should be requested through the Request a Quote form on this page. The retrieved listings include a family-level starting-price reference, but no explicit quantity-break table for the exact CD4503BD3 order code was confirmed. The quote form provides a current response tied to the required quantity and package configuration.
What is the lead time for CD4503BD3?
The current lead time for CD4503BD3 is not stated in the retrieved information. Request a quote for the required quantity and confirm the manufacturer or authorized supply status at the same time. For legacy 16-CERDIP logic, allocation status and production-cycle assumptions can materially affect delivery, so avoid relying on a generic catalog lead-time estimate.
Can CD4503BD3 replace a CD4503 in an industrial control board?
A CD4503BD3 can be considered for a CD4503 replacement only when the target board uses the matching 16-CERDIP footprint and the ordering suffix confirms compatible voltage, temperature, and performance grades. The family datasheet shows the common CD4503 function, while the exact suffix details determine whether a board substitution is valid. Perform a full pin and electrical comparison before approving the change.
Are CD4503BD3 and CD4503 the same device?
No, CD4503BD3 is an orderable suffix and CD4503 is the family name used for the underlying hex three-state buffer function. CD4503BD3 specifically identifies a Harris Corporation offering in a 16-CERDIP package. Verify suffix-specific temperature grade, package, and lifecycle details separately because the family name alone does not establish a drop-in ordering equivalence.

엔지니어링 참조 데이터: CD4503BD3 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose CD4503BD3 when a through-hole industrial or legacy design needs six non-inverting tri-state buffers with two grouped disable inputs. Its 16-CERDIP package and high sink and source current capability make it appropriate for shared buses, grouped data isolation, and multiplexing. Do not substitute a generic logic IC without confirming the exact pinout, disable polarity, voltage ratings, timing, and output-drive behavior. A replacement must also preserve the 16-CERDIP footprint and function as a pin-to-pin drop-in part. For new compact products, a smaller modern buffer may be mechanically preferable, but it would require a different footprint and therefore is not a direct board replacement.

대체품과의 비교

파라미터 이 제품
Brand Harris Corporation
Package 16-CERDIP
Product Type Hex non-inverting three-state buffer
Number of Buffer Elements 6
Bits per Element 6
Disable Controls 2; one controls four buffers and one controls two buffers
Output States High, low, and high impedance
Logic Technology CMOS
Mounting Type Through-hole
Output Drive High sink and source current capability

주요 차별점

  • Six non-inverting channels with grouped tri-state control (vs Conventional single-channel non-inverting buffer)
  • Two disable controls cover different channel groups (vs Buffer with one shared enable input)
  • High sink and source current capability (vs Basic CMOS gate output)

설계 노트

Never enable two CD4503BD3 outputs onto the same net unless both devices are designed for a documented bus-ownership transition. Inspect disable-control polarity in the CD4503 manufacturer datasheet and include propagation delay in the arbitration timing budget. Holding every input at a defined logic level also prevents unused channels from entering an indeterminate state.

Use the 16-CERDIP pin-description table to assign every connection and preserve standard counter-clockwise numbering. Keep disable traces away from clocks and sensitive data nets, and route each output to either a dedicated receiver or a properly controlled shared bus. Do not rely on a board outline alone as proof of electrical compatibility.

Before energizing the circuit, verify the supply-voltage range, absolute maximum ratings, and input thresholds from the CD4503 manufacturer datasheet. Confirm that the board’s pull-up or pull-down network cannot force an output beyond its permitted range while the CD4503BD3 is in the high-impedance state. Add decoupling according to the device’s recommended operating conditions and power-supply layout practice.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for CD4503BD3. Confirm compliance and traceability with the manufacturer or the organization handling the purchase.

관련 검색

CD4503BD3 datasheet CD4503BD3 datasheet pdf CD4503BD3 pinout CD4503BD3 equivalent CD4503BD3 replacement CD4503BD3 cross reference CD4503BD3 16-CERDIP CD4503BD3 three-state buffer CD4503BD3 disable controls CD4503BD3 price CD4503BD3 stock Harris Corporation CD4503BD3

관련 부품 & 용어

Harris Corporation CD4503BD3 CD4503 CMOS hex buffer non-inverting buffer three-state buffer tri-state output high-impedance state logic IC integrated circuit semiconductor disable control shared data bus bus arbitration address multiplexing data multiplexing 16-CERDIP CERDIP DIP package through-hole mounting high sink current high source current industrial automation
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기