CS8421-EZZ - 32-Bit 192kHz Stereo SRC | Cirrus Logic
부품 번호: CS8421-EZZ ✗ 단종CS8421-EZZ 개요
An audio sample-rate converter is a digital audio interface IC that changes the sampling rate of a PCM audio stream while preserving the represented signal. It sits between source and destination audio devices in the digital audio signal chain. The CS8421-EZZ provides two-channel conversion for stereo formats and accommodates 32-bit, 192 kHz-class digital audio while using configurable three-wire serial input and output interfaces.
The CS8421-EZZ supports 16-, 20-, 24-, and 32-bit audio data, allowing the system architect to balance resolution against interface bandwidth and processing requirements. Its asynchronous operation is useful when the source and destination do not share a common clock. Alternatively, the converter can synchronize to an external data clock or operate without an external clock through its integrated oscillator. These operating choices support equipment interoperability and standalone clocking arrangements.
As a dedicated sample-rate converter, the CS8421-EZZ separates conversion functions from the codecs and digital signal processors found elsewhere in an audio system. The configurable three-wire digital interfaces simplify connection with audio transmitters, receivers, converters, processors, and test equipment. This makes the device applicable to professional audio, consumer audio, broadcast, and digital recording systems where source and destination rates differ.
Typical implementations place the CS8421-EZZ between an asynchronous digital audio source and a clocked DAC, or between a digital audio interface and downstream processing. Another practical use is clock adaptation within a multichannel audio subsystem. Because the converter supports both external-clock synchronization and integrated-oscillator operation, a designer can select the operating mode that best matches the system clock architecture and startup behavior.
Designers should treat this part as a discontinued product and confirm availability before committing a new production design. PCB layouts should follow the exact pin assignments and exposed-pad requirements in the manufacturer datasheet. Because this converter handles high-speed digital audio, trace routing, grounding, and decoupling require disciplined implementation to minimize data-integrity and clocking problems.
This product summary combines the manufacturer’s functional description with package information, application guidance, pin-assignment planning, and replacement analysis. It also highlights the distinction between asynchronous operation, external-clock synchronization, and integrated-oscillator operation, helping engineers determine whether the CS8421-EZZ architecture matches the clocking requirements of the target audio system.
드롭인 대체품: CS8421-EZZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
CS8421-EZZR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CS8421-CZZ
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →CS8421-EZZ 최대 정격 & 전기적 특성
| Device Type | Stereo audio sample-rate converter |
| Audio Channel Count | 2 channels |
| Internal Data Width | 32 bit |
| Maximum Sample Rate | 192 kHz |
| Supported Input Word Lengths | 16 bit, 20 bit, 24 bit, or 32 bit |
| Supported Output Word Lengths | 16 bit, 20 bit, 24 bit, or 32 bit |
| Asynchronous Operation | Supported |
| External Clock Synchronization | Supported |
| Integrated Oscillator Mode | Supported |
| Digital Audio Interface | Configurable 3-wire input and 3-wire output |
| 패키지 | 20-pin TSSOP |
| 실장 유형 | Surface mount |
| 수명 주기 상태 | Discontinued |
CS8421-EZZ 20-pin tssop 핀 구성 가이드
CS8421-EZZ(20-pin tssop 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CS8421-EZZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CS8421-EZZ 적합 용도: 6 애플리케이션s: Asynchronous Stereo Audio Rate Conversion, Digital Audio Interface Rate Bridging, External-Clock Digital Audio Systems, Standalone Digital Audio Conversion, Professional Audio Equipment, Digital Audio Test and Measurement.
Asynchronous Stereo Audio Rate Conversion
The CS8421-EZZ is appropriate when an audio source and destination do not share a common clock. Its asynchronous operating mode allows a two-channel digital audio stream to be converted without requiring a common master clock between the endpoints. The converter supports input and output word lengths from 16 to 32 bits and operation up to 192 kHz, giving designers room to match resolution and sampling-rate requirements. Configure the three-wire serial inputs and outputs, clocking architecture, and audio word length in the manufacturer datasheet, then verify that the source and destination can present and accept the required frame format.
추천
Digital Audio Interface Rate Bridging
Use the CS8421-EZZ to bridge a digital audio interface whose sampling rate differs from that of a downstream codec, converter, or signal processor. The dedicated converter architecture separates rate adaptation from the mixed-signal audio path, while configurable three-wire input and output interfaces simplify connection with digital audio devices. Support for 16-, 20-, 24-, and 32-bit data provides flexibility across studio, broadcast, and consumer equipment. The main design check is ensuring that clock edges, word length, and frame structure satisfy both endpoints’ timing requirements.
추천
External-Clock Digital Audio Systems
The CS8421-EZZ fits digital audio systems that require the converter to follow a defined external data clock rather than operate autonomously. Synchronous operation gives the converter a common timing reference for consistent transfer into a clocked signal chain. Its 32-bit architecture and 192 kHz maximum rate are appropriate for high-resolution stereo paths, while selectable 16-, 20-, 24-, and 32-bit word lengths allow the interface to match the downstream processor. Route clock and data signals together, maintain the specified setup and hold relationships, and validate timing margins at the intended audio rate.
추천
Standalone Digital Audio Conversion
The integrated oscillator permits the CS8421-EZZ to perform stereo sample-rate conversion without an external master clock. This is useful in standalone equipment, test systems, and startup scenarios where one endpoint has no usable timing reference. The device can still accept 32-, 24-, 20-, or 16-bit audio and operate at rates up to 192 kHz. Designers should account for the converter’s internal clock behavior when validating startup, output continuity, and interoperability, using the timing diagrams and application guidance in the manufacturer datasheet.
추천
Professional Audio Equipment
Professional audio equipment often combines playback, recording, synchronization, and processing paths that do not naturally share a sampling rate. The CS8421-EZZ provides dedicated two-channel conversion at up to 192 kHz with configurable digital word lengths, allowing a 32-bit signal chain to be adapted without placing the burden on a general-purpose processor. Its three-wire serial interfaces suit point-to-point digital connections. For installation in professional systems, validate the supported sample-rate combinations, external-clock behavior, and serial timing against the particular equipment architecture before production use.
추천
Digital Audio Test and Measurement
The CS8421-EZZ can support laboratory and test-system paths that need to translate digital audio between unlike sampling rates. Its 32-bit, 192 kHz capability and four supported word lengths allow stimulus or captured audio to be routed through a controlled conversion stage before reaching another instrument. Asynchronous, externally clocked, and integrated-oscillator modes give the test engineer several timing arrangements. Because the CS8421 is discontinued, confirm instrument interoperability and long-term availability before integrating it into a new test platform, and use the manufacturer timing diagrams when validating data capture.
추천
추천 제품 요약
엔지니어링 참조 데이터: CS8421-EZZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CS8421-EZZR | CS8421-CZZ |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Device Type | Stereo audio sample-rate converter | Stereo audio sample-rate converter | Stereo audio sample-rate converter |
| Internal Data Width | 32 bit | 32 bit | 32 bit |
| Maximum Sample Rate | 192 kHz | 192 kHz | 192 kHz |
| Audio Channels | 2 channels | 2 channels | 2 channels |
| Clocking Modes | Asynchronous, external data clock, or integrated oscillator | Asynchronous, external data clock, or integrated oscillator | Asynchronous, external data clock, or integrated oscillator |
| Digital Audio Interface | Configurable 3-wire input and 3-wire output | Configurable 3-wire input and 3-wire output | Configurable 3-wire input and 3-wire output |
주요 차별점
- Dedicated asynchronous stereo sample-rate conversion (vs CS8421-EZZR)
- Flexible clock architecture (vs CS8421-CZZ)
- Broad digital audio word-length support (vs CS8421-EZZR)
설계 노트
Implement the 20-pin TSSOP footprint from the manufacturer package drawing and verify pad dimensions, lead pitch, solder-mask clearance, and paste volume against the assembly process. Treat the pin assignments as device-specific: audio data, clocks, control signals, ground, and supply pins must be assigned from the datasheet pin table. Preserve access to all leads and provide adequate solder-joint inspection clearance, especially where fine-pitch leads are close to the package body.
Route serial audio data and clock traces as short, continuous paths on a solid reference plane. Avoid splitting the ground plane beneath the device, adding vias in high-speed data nets, or routing clock traces adjacent to noisy switching nodes. Match interface timing to the manufacturer specification and validate setup, hold, and data-valid relationships at the intended sample rate. If the source and destination are asynchronous, confirm that the converter’s clock-detection and status behavior satisfies the system requirement.
Do not assume that every CS8421 orderable suffix is interchangeable without checking the package suffix, marking rules, pin configuration, and production status. Likewise, do not treat a sample-rate converter with the same package count as a drop-in replacement: interface protocol, clock architecture, supply voltage, word-length support, and conversion behavior must all match. Because the manufacturer lists the CS8421 as discontinued, review the datasheet revision and lifecycle notices before starting a new layout.
Follow the manufacturer’s recommended power-entry network and decoupling arrangement exactly. Place the closest bypass capacitor at the device supply pins with a short return path to the ground reference, and avoid routing supply current through digital output areas. Verify the regulator’s startup behavior, ripple tolerance, and load-transient response at the actual sample rate. The required supply voltage is not stated in the available component listing, so it must be confirmed from the datasheet before selecting decoupling and power rails.
규정 준수 정보
The available product information identifies the package and core conversion functions but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose audio interface device.