最後購買通知: CS8421-EZZ 即將停產。最後下單日期: 聯絡我們. 查看可用的替代零件 →
Cirrus Logic Inc.

CS8421-EZZ - 32-Bit 192kHz Stereo SRC | Cirrus Logic

MPN: CS8421-EZZ ✗ 停產
20-pin TSSOP Package Supported Speed
MOQ: 1 |

CS8421-EZZ 概覽

Cirrus Logic CS8421-EZZ is a 32-bit, 192 kHz, asynchronous stereo audio sample-rate converter packaged in a 20-pin TSSOP. It accepts digital audio word lengths of 32, 24, 20, or 16 bits and supports completely asynchronous, externally clocked synchronous, and integrated-oscillator operating modes. The device is designed for audio systems that require sample-rate conversion between digital sources and destinations operating at different clock rates.

An audio sample-rate converter is a digital audio interface IC that changes the sampling rate of a PCM audio stream while preserving the represented signal. It sits between source and destination audio devices in the digital audio signal chain. The CS8421-EZZ provides two-channel conversion for stereo formats and accommodates 32-bit, 192 kHz-class digital audio while using configurable three-wire serial input and output interfaces.

The CS8421-EZZ supports 16-, 20-, 24-, and 32-bit audio data, allowing the system architect to balance resolution against interface bandwidth and processing requirements. Its asynchronous operation is useful when the source and destination do not share a common clock. Alternatively, the converter can synchronize to an external data clock or operate without an external clock through its integrated oscillator. These operating choices support equipment interoperability and standalone clocking arrangements.

As a dedicated sample-rate converter, the CS8421-EZZ separates conversion functions from the codecs and digital signal processors found elsewhere in an audio system. The configurable three-wire digital interfaces simplify connection with audio transmitters, receivers, converters, processors, and test equipment. This makes the device applicable to professional audio, consumer audio, broadcast, and digital recording systems where source and destination rates differ.

Typical implementations place the CS8421-EZZ between an asynchronous digital audio source and a clocked DAC, or between a digital audio interface and downstream processing. Another practical use is clock adaptation within a multichannel audio subsystem. Because the converter supports both external-clock synchronization and integrated-oscillator operation, a designer can select the operating mode that best matches the system clock architecture and startup behavior.

Designers should treat this part as a discontinued product and confirm availability before committing a new production design. PCB layouts should follow the exact pin assignments and exposed-pad requirements in the manufacturer datasheet. Because this converter handles high-speed digital audio, trace routing, grounding, and decoupling require disciplined implementation to minimize data-integrity and clocking problems.

This product summary combines the manufacturer’s functional description with package information, application guidance, pin-assignment planning, and replacement analysis. It also highlights the distinction between asynchronous operation, external-clock synchronization, and integrated-oscillator operation, helping engineers determine whether the CS8421-EZZ architecture matches the clocking requirements of the target audio system.

直接替換替代品,適用於 CS8421-EZZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

CS8421-EZZR

✅ 直接替換
📦 20-pin TSSOP
Family-related CS8421 orderable variant; the available comparison result does not quantify a electrical difference from CS8421-EZZ

📋 參考替代品(不在目錄中)

CS8421-CZZ

✅ 直接替換 ⚠️ 規格未經驗證
Cirrus Logic Inc.
📦 20-pin TSSOP
Asynchronous stereo sample-rate converter · 32 bit · 192 kHz · 211 kHz · 2 channels (stereo) · 32 bit, 24 bit, 20 bit, or 16 bit · 32 bit, 24 bit, 20 bit, or 16 bit · Monolithic CMOS

聯絡詢價

查看資料表 →

CS8421-EZZ 最大額定值與電氣特性

Device Type Stereo audio sample-rate converter
Audio Channel Count 2 channels
Internal Data Width 32 bit
Maximum Sample Rate 192 kHz
Supported Input Word Lengths 16 bit, 20 bit, 24 bit, or 32 bit
Supported Output Word Lengths 16 bit, 20 bit, 24 bit, or 32 bit
Asynchronous Operation Supported
External Clock Synchronization Supported
Integrated Oscillator Mode Supported
Digital Audio Interface Configurable 3-wire input and 3-wire output
封裝 20-pin TSSOP
安裝類型 Surface mount
生命週期狀態 Discontinued

CS8421-EZZ 20-pin tssop 腳位配置指南

CS8421-EZZ(20-pin tssop 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

CS8421-EZZ 的 20-pin tssop 封裝腳位圖

無詳細腳位定義資料: CS8421-EZZ.

請參閱 資料表 以查看完整腳位配置。

典型應用

CS8421-EZZ 適用於 6 應用s: Asynchronous Stereo Audio Rate Conversion, Digital Audio Interface Rate Bridging, External-Clock Digital Audio Systems, Standalone Digital Audio Conversion, Professional Audio Equipment, Digital Audio Test and Measurement.

🎧

Asynchronous Stereo Audio Rate Conversion

The CS8421-EZZ is appropriate when an audio source and destination do not share a common clock. Its asynchronous operating mode allows a two-channel digital audio stream to be converted without requiring a common master clock between the endpoints. The converter supports input and output word lengths from 16 to 32 bits and operation up to 192 kHz, giving designers room to match resolution and sampling-rate requirements. Configure the three-wire serial inputs and outputs, clocking architecture, and audio word length in the manufacturer datasheet, then verify that the source and destination can present and accept the required frame format.

🌐

Digital Audio Interface Rate Bridging

Use the CS8421-EZZ to bridge a digital audio interface whose sampling rate differs from that of a downstream codec, converter, or signal processor. The dedicated converter architecture separates rate adaptation from the mixed-signal audio path, while configurable three-wire input and output interfaces simplify connection with digital audio devices. Support for 16-, 20-, 24-, and 32-bit data provides flexibility across studio, broadcast, and consumer equipment. The main design check is ensuring that clock edges, word length, and frame structure satisfy both endpoints’ timing requirements.

🖥️

External-Clock Digital Audio Systems

The CS8421-EZZ fits digital audio systems that require the converter to follow a defined external data clock rather than operate autonomously. Synchronous operation gives the converter a common timing reference for consistent transfer into a clocked signal chain. Its 32-bit architecture and 192 kHz maximum rate are appropriate for high-resolution stereo paths, while selectable 16-, 20-, 24-, and 32-bit word lengths allow the interface to match the downstream processor. Route clock and data signals together, maintain the specified setup and hold relationships, and validate timing margins at the intended audio rate.

🔧

Standalone Digital Audio Conversion

The integrated oscillator permits the CS8421-EZZ to perform stereo sample-rate conversion without an external master clock. This is useful in standalone equipment, test systems, and startup scenarios where one endpoint has no usable timing reference. The device can still accept 32-, 24-, 20-, or 16-bit audio and operate at rates up to 192 kHz. Designers should account for the converter’s internal clock behavior when validating startup, output continuity, and interoperability, using the timing diagrams and application guidance in the manufacturer datasheet.

🎙️

Professional Audio Equipment

Professional audio equipment often combines playback, recording, synchronization, and processing paths that do not naturally share a sampling rate. The CS8421-EZZ provides dedicated two-channel conversion at up to 192 kHz with configurable digital word lengths, allowing a 32-bit signal chain to be adapted without placing the burden on a general-purpose processor. Its three-wire serial interfaces suit point-to-point digital connections. For installation in professional systems, validate the supported sample-rate combinations, external-clock behavior, and serial timing against the particular equipment architecture before production use.

📺

Digital Audio Test and Measurement

The CS8421-EZZ can support laboratory and test-system paths that need to translate digital audio between unlike sampling rates. Its 32-bit, 192 kHz capability and four supported word lengths allow stimulus or captured audio to be routed through a controlled conversion stage before reaching another instrument. Asynchronous, externally clocked, and integrated-oscillator modes give the test engineer several timing arrangements. Because the CS8421 is discontinued, confirm instrument interoperability and long-term availability before integrating it into a new test platform, and use the manufacturer timing diagrams when validating data capture.

What is the Cirrus Logic CS8421-EZZ?
The Cirrus Logic CS8421-EZZ is a 32-bit, 192 kHz, asynchronous stereo audio sample-rate converter in a 20-pin TSSOP package. According to the manufacturer product page, its digital audio input and output support 32-, 24-, 20-, and 16-bit word lengths. The IC converts between digital audio streams with different sampling rates and can operate asynchronously, synchronize to an external data clock, or use its integrated oscillator.
What sample rates and audio word lengths does the CS8421-EZZ support?
The CS8421-EZZ supports digital audio data rates up to 192 kHz and word lengths of 16, 20, 24, or 32 bits. The manufacturer describes the CS8421 as a 32-bit, 192 kHz stereo sample-rate converter, with both input and output data capable of using the four listed word lengths. Configuration of the serial interface and supported rates should be confirmed against the specific operating mode in the manufacturer datasheet.
Can the CS8421-EZZ operate without an external master clock?
Yes, the CS8421-EZZ can operate without an external clock by using its integrated oscillator. The manufacturer product page also identifies asynchronous operation and synchronization to an external data clock as supported configurations. This flexibility allows the converter to suit systems with independent source and destination clocks, as well as designs that require autonomous operation during startup or standalone conversion.
Where can I download the CS8421-EZZ datasheet PDF?
The manufacturer datasheet PDF is available through the CS8421-EZZ data sheet link at https://www.lcsc.com/datasheet/C1535583.pdf, while the official product information is located at https://www.cirrus.com/products/cs8421. Use the manufacturer document for authoritative pin assignments, electrical characteristics, serial-interface timing, recommended application circuitry, and package drawings.
Where can I find the CS8421-EZZ pinout?
The CS8421-EZZ pinout is shown in the manufacturer datasheet, which is linked from the official CS8421 product page at https://www.cirrus.com/products/cs8421. The device is specified in a 20-pin TSSOP package. Assign PCB nets from the datasheet pin-description table and power-entry connection, and verify every signal against the production revision rather than inferring pin functions from the package outline.
What can replace the CS8421-EZZ?
A replacement must provide a 20-pin TSSOP footprint, compatible serial interfaces, equivalent clocking modes, and compatible conversion parameters. The available cross-reference results identify CS8421-EZZR and CS8421-CZZ as members or orderable variants of the CS8421 family, but they do not establish five qualified drop-in alternatives. Confirm pin-to-pin behavior, supply voltage, maximum sample rate, word lengths, and lifecycle requirements before substituting any variant.
Is the CS8421-EZZ the same as the CS8421-EZZR?
The CS8421-EZZ and CS8421-EZZR belong to the same Cirrus Logic device family, but the available comparison result does not establish that every production parameter is identical. The suffix may indicate a different orderable packaging or delivery configuration. Treat CS8421-EZZR as a family-related candidate rather than an automatic substitution until its marking, tape-and-reel configuration, pinout, and operating specifications have been checked.
Is the CS8421-EZZ suitable for asynchronous digital audio?
Yes, the CS8421-EZZ is specifically suited to asynchronous stereo audio conversion. According to the manufacturer product page, input and output data can be completely asynchronous, synchronous to an external data clock, or generated using the integrated oscillator. This makes the converter appropriate for bridges between digital audio sources and destinations whose clocks are not synchronized.
When should I choose the CS8421-EZZ over another sample-rate converter?
Choose the CS8421-EZZ when the design needs two-channel conversion, data paths supporting up to 32-bit word lengths, operation up to 192 kHz, configurable three-wire digital interfaces, and the option of asynchronous, externally clocked, or integrated-oscillator operation. A different converter is preferable when the system requires a smaller package, lower data rate, fewer channels, a different serial format, or a currently active lifecycle status.
Where can I buy the CS8421-EZZ online?
The CS8421-EZZ can be requested through the Request a Quote form on this product page. Because the manufacturer identifies the CS8421 as discontinued, availability may be limited and should be confirmed for the exact orderable suffix and required quantity. The Request a Quote form is the appropriate channel for current commercial terms, stock confirmation, and lead-time review.
What is the price of the CS8421-EZZ?
Current pricing for the CS8421-EZZ is obtained through the Request a Quote form on this page. No fixed price is stated here because discontinued-device pricing can change with quantity, packaging, inspection requirements, and remaining inventory. Submit the required quantity, target packaging, and any traceability requirements with the quote request to obtain the applicable commercial response.
What is the lead time for the CS8421-EZZ?
The lead time for the CS8421-EZZ should be confirmed through the Request a Quote form on this page. The manufacturer identifies the CS8421 as discontinued, so delivery timing can depend on remaining factory or channel inventory rather than a standard production schedule. Include your required quantity and date code preferences in the request so the supplier can confirm allocation and schedule.
Is the CS8421-EZZ currently in stock?
Current CS8421-EZZ stock status must be confirmed through the Request a Quote form on this page. The manufacturer classifies the CS8421 as discontinued, and the phrase “ships today” on a distributor result does not guarantee inventory for every quantity or package configuration. Request a quotation with your required quantity and delivery schedule for an inventory-backed answer.
What are the key specifications of the CS8421-EZZ that engineers should know?
The key specifications are 32-bit internal processing, operation up to 192 kHz, two-channel conversion, 16-/20-/24-/32-bit input and output word lengths, and a 20-pin TSSOP package. Its three operating arrangements are fully asynchronous conversion, synchronization to an external data clock, and integrated-oscillator operation. The digital interface uses configurable three-wire input and output connections.
Which Cirrus Logic device is the best equivalent for the CS8421-EZZ?
No cross-brand equivalent can be identified responsibly from the available component information. The CS8421-EZZR and CS8421-CZZ appear in family-related listings, but the documented evidence does not confirm that either is a guaranteed drop-in replacement for every production configuration. Use a component cross-reference search to locate candidates, then require identical package dimensions, pin functions, supply voltage, clock architecture, supported rates, word lengths, and serial-interface timing.
How should the CS8421-EZZ be used in a digital audio system?
The CS8421-EZZ can be placed between digital audio sources and destinations that operate at different sampling rates or use incompatible clocks. In an asynchronous design, the converter manages conversion between independent source and destination timing. In a synchronous design, it follows an external data clock. In integrated-oscillator mode, it can operate without an external clock. Interface timing and routing must follow the manufacturer datasheet.

工程參考資料,適用於 CS8421-EZZ — 比較、設計指引及合規資訊。

選型指南

Choose the CS8421-EZZ when an existing design requires a dedicated two-channel, 32-bit stereo sample-rate converter with operation up to 192 kHz and configurable three-wire digital interfaces. It is particularly suitable when source and destination clocks are asynchronous, although external-clock synchronization and integrated-oscillator operation are also supported. Consider CS8421-EZZR when that exact family ordering better matches the required tape-and-reel configuration, and review CS8421-CZZ when its ordering code matches production documentation. Do not select either family-related part solely because it has 20 pins. Before substitution, verify supply voltage, serial timing, control logic, clock behavior, package dimensions, and lifecycle status. For a new design with no legacy footprint constraint, an active converter may be preferable because the manufacturer identifies the CS8421 as discontinued.

與替代品比較

參數 本產品 CS8421-EZZR CS8421-CZZ
Brand Cirrus Logic Cirrus Logic Cirrus Logic
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Device Type Stereo audio sample-rate converter Stereo audio sample-rate converter Stereo audio sample-rate converter
Internal Data Width 32 bit 32 bit 32 bit
Maximum Sample Rate 192 kHz 192 kHz 192 kHz
Audio Channels 2 channels 2 channels 2 channels
Clocking Modes Asynchronous, external data clock, or integrated oscillator Asynchronous, external data clock, or integrated oscillator Asynchronous, external data clock, or integrated oscillator
Digital Audio Interface Configurable 3-wire input and 3-wire output Configurable 3-wire input and 3-wire output Configurable 3-wire input and 3-wire output

主要差異化特點

  • Dedicated asynchronous stereo sample-rate conversion (對比CS8421-EZZR)
  • Flexible clock architecture (對比CS8421-CZZ)
  • Broad digital audio word-length support (對比CS8421-EZZR)

設計說明

Implement the 20-pin TSSOP footprint from the manufacturer package drawing and verify pad dimensions, lead pitch, solder-mask clearance, and paste volume against the assembly process. Treat the pin assignments as device-specific: audio data, clocks, control signals, ground, and supply pins must be assigned from the datasheet pin table. Preserve access to all leads and provide adequate solder-joint inspection clearance, especially where fine-pitch leads are close to the package body.

Route serial audio data and clock traces as short, continuous paths on a solid reference plane. Avoid splitting the ground plane beneath the device, adding vias in high-speed data nets, or routing clock traces adjacent to noisy switching nodes. Match interface timing to the manufacturer specification and validate setup, hold, and data-valid relationships at the intended sample rate. If the source and destination are asynchronous, confirm that the converter’s clock-detection and status behavior satisfies the system requirement.

Do not assume that every CS8421 orderable suffix is interchangeable without checking the package suffix, marking rules, pin configuration, and production status. Likewise, do not treat a sample-rate converter with the same package count as a drop-in replacement: interface protocol, clock architecture, supply voltage, word-length support, and conversion behavior must all match. Because the manufacturer lists the CS8421 as discontinued, review the datasheet revision and lifecycle notices before starting a new layout.

Follow the manufacturer’s recommended power-entry network and decoupling arrangement exactly. Place the closest bypass capacitor at the device supply pins with a short return path to the ground reference, and avoid routing supply current through digital output areas. Verify the regulator’s startup behavior, ripple tolerance, and load-transient response at the actual sample rate. The required supply voltage is not stated in the available component listing, so it must be confirmed from the datasheet before selecting decoupling and power rails.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product information identifies the package and core conversion functions but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose audio interface device.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

cs8421 datasheet cs8421 czz cirrus cs8421 CS8421-EZZ datasheet pdf CS8421-EZZ pinout CS8421-EZZ specifications CS8421-EZZ equivalent CS8421-EZZ replacement CS8421-EZZ vs CS8421-EZZR CS8421-EZZ 192kHz stereo CS8421-EZZ application circuit CS8421-EZZ price CS8421-EZZ stock Cirrus Logic CS8421-EZZ

相關元件與詞彙

Cirrus Logic CS8421-EZZ CS8421-EZZR CS8421-CZZ audio sample-rate converter sample-rate converter SRC stereo audio converter digital audio interface asynchronous conversion external data clock integrated oscillator 32-bit audio 192 kHz audio three-wire serial interface TSSOP-20 TSSOP surface-mount package digital signal processing professional audio broadcast audio audio clocking semiconductor
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情