CY8C3446PVI-092 50MHz 64KB Flash MCU | Infineon
부품 번호: CY8C3446PVI-092 ✓ 활성CY8C3446PVI-092 개요
A PSoC, or Programmable System-on-Chip, combines a microcontroller core with configurable analog and digital peripheral blocks on one integrated device. The CY8C34 family belongs to the 8-bit PSoC 3 portfolio and extends the conventional microcontroller hierarchy of CPU, memory, and fixed peripherals with configurable signal-processing resources. This integration can reduce the number of separate analog, timing, and interface components required in compact embedded products.
The CY8C3446PVI-092 combines 64 KB of Flash with a 50 MHz 8051 core and a 12-bit ADC in this ordering. The 8051 architecture provides a familiar instruction set and broad software-tool compatibility for embedded control applications. Its 48-pin BSSOP footprint exposes substantially more I/O than smaller 8-bit packages, making the device suitable for products requiring several digital inputs, outputs, communications functions, and analog measurements.
The PSoC 3 architecture places configurable blocks alongside the 8051 processing core. These blocks can be assigned to functions such as analog-to-digital conversion, digital-to-analog conversion, timers, counters, serial communication, and other mixed-signal control tasks. Exact peripheral inventory, pin multiplexing, and electrical limits should be confirmed in the manufacturer datasheet before assigning resources or laying out a production board.
Typical uses include industrial control modules, compact sensor interfaces, building and access-control equipment, consumer appliances, instrumentation, and low-power embedded products. The combination of a wide supply range and 48-pin surface-mount package supports both conventional 3.3 V and 5 V designs. Programmable peripheral resources are particularly useful when a product needs flexible timing, signal conditioning, or mixed-signal interfaces without a large external peripheral set.
PCB planning should begin with the manufacturer pin-description table and the 48-BSSOP land pattern. Confirm each multiplexed peripheral assignment before routing because a single physical pin may support several functions. Place decoupling capacitors adjacent to the supply pins, provide a clean oscillator and programming interface, and verify the external component requirements associated with the selected configuration.
This product page consolidates the verified device identity, electrical highlights, package information, same-family drop-in options, and engineering selection guidance. It also distinguishes the target ordering code from closely related PSoC 3 devices so procurement, firmware planning, and PCB reuse decisions can be made against the correct device configuration.
드롭인 대체품: CY8C3446PVI-092 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CY8C3446PVI-092 (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, Flash Protection Levels, Interrupt Priority Levels, Interrupt Sources.
CY8C3446PVI-076
✅ 드롭인가격 문의
데이터시트 보기 →CY8C3446PVI-102
✅ 드롭인가격 문의
데이터시트 보기 →CY8C3446PVA-092
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY8C3446PVI-092 최대 정격 & 전기적 특성
| Product Type | 8-bit Flash-programmable system-on-chip microcontroller |
| CPU Core | 8051, 8-bit |
| 최대 클록 주파수 | 50 MHz |
| Flash Memory | 64 KB (64K x 8 bits) |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V |
| ADC Resolution | 12 bits |
| Device Family | PSoC 3 CY8C34 family |
| 패키지 | 48-pin BSSOP |
| Package Width | 7.50 mm |
| 실장 유형 | Surface mount |
| Programmable Architecture | Configurable analog and digital peripheral blocks |
| Programming Interface | ISP-SWD |
CY8C3446PVI-092 7.50 mm 핀 구성 가이드
CY8C3446PVI-092(7.50 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CY8C3446PVI-092.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CY8C3446PVI-092 적합 용도: 6 애플리케이션s: Industrial Control Module, Compact Sensor Interface, Building and Access Control, Consumer Appliance Controller, Test and Measurement Instrument, Programmable Signal Controller.
Industrial Control Module
The CY8C3446PVI-092 fits compact industrial control modules that combine digital sequencing with limited analog measurement. Its 8051 core operates up to 50 MHz, while 64 KB of Flash provides room for control logic, state machines, and service routines. The 48-pin BSSOP exposes more I/O than a small-package MCU, and the 1.71 V to 5.5 V range accommodates common industrial supply arrangements. Configurable PSoC blocks can consolidate timing, communication, or signal-processing functions, reducing component count. Before layout release, verify the selected peripheral configuration, temperature requirements, isolation boundaries, and pin multiplexing in the manufacturer pin table.
추천
Compact Sensor Interface
The CY8C3446PVI-092 is suitable for sensor-interface products that require local acquisition, filtering, and control without a separate analog processor. The device includes a 12-bit ADC and runs its 8051 core at up to 50 MHz, allowing control software to combine sensor readings with configurable digital functions in one package. Its 64 KB of Flash is suitable for calibration tables, conversion routines, and interface protocols. The 48-pin BSSOP also provides enough pins to distribute sensor inputs and actuator outputs. Actual signal-chain accuracy depends on the selected ADC configuration, reference arrangement, analog routing, and external conditioning components, which should be validated against the manufacturer datasheet.
추천
Building and Access Control
The CY8C3446PVI-092 can support compact access-control readers, lock controllers, and building equipment interfaces that need deterministic digital control plus configurable peripheral resources. The 50 MHz 8051 core handles protocol and state-management tasks, and 64 KB of Flash accommodates application firmware and configuration data. Its broad 1.71 V to 5.5 V operating range supports integration with several logic and communication levels, although each I/O must be checked against its voltage-domain limits. The 48-pin surface-mount package simplifies multi-function board layouts. Security, environmental endurance, and long-term availability requirements should be assessed separately because the target ordering code alone does not establish every certification or environmental grade.
추천
Consumer Appliance Controller
The CY8C3446PVI-092 is appropriate for compact consumer-appliance controllers where several switches, indicators, sensors, and timing functions must be consolidated. A 50 MHz 8051 core provides ample control performance for user-interface logic, motor or relay sequencing, and communication handling, while 64 KB of Flash provides a practical code and configuration budget. The PSoC 3 programmable blocks can reduce demand for discrete timers or interface circuitry when routed appropriately. A 3.3 V-centered configuration is identified for this ordering code, and the 1.71 V to 5.5 V device range can assist voltage integration. Confirm output drive, timing tolerance, brownout behavior, and EMC margins before finalizing the appliance PCB.
추천
Test and Measurement Instrument
The CY8C3446PVI-092 can serve as the control processor in compact test and measurement products that combine configurable analog functions with an embedded user interface. Its 12-bit ADC supports general-purpose signal acquisition, and the 50 MHz 8051 core can process measurements, coordinate calibration, and manage operator commands. The 64 KB Flash capacity is useful for instrument firmware, though large data buffers or complex graphs may require external memory. The 48-pin BSSOP package provides a practical balance between peripheral access and board size. For metrology-grade results, specify analog reference components, define ADC averaging and calibration procedures, and evaluate noise, gain error, and timing accuracy using the manufacturer characterization information.
추천
Programmable Signal Controller
The CY8C3446PVI-092 is well suited to programmable signal controllers that must combine timing, communications, and analog functions in a compact embedded platform. Its configurable PSoC 3 architecture allows resources to be assigned more flexibly than a fixed-peripheral MCU, while the 50 MHz 8051 core executes control and supervisory code. The 64 KB Flash stores firmware and fixed configuration data, and the 48-pin BSSOP provides sufficient connections for inputs, outputs, programming, and communications. The 1.71 V to 5.5 V operating range supports multiple rail combinations. Final signal integrity and timing depend on pin routing and external implementation, so use the manufacturer datasheet to validate high-speed routing, clock limits, peripheral restrictions, and package-specific design guidance.
추천
추천 제품 요약
엔지니어링 참조 데이터: CY8C3446PVI-092 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CY8C3446PVI-076 | CY8C3446PVI-102 | CY8C3446PVA-092 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 48-pin BSSOP | 48-pin SSOP | 48-pin SSOP | 48-pin SSOP |
| CPU Core | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| Device Family | PSoC 3 CY8C34 family | PSoC 3 CY8C34 family | PSoC 3 CY8C34 family | PSoC 3 CY8C34 family |
주요 차별점
- Exact 50 MHz and 64 KB Flash configuration (vs CY8C3446PVI-076)
- Matching 12-bit mixed-signal capability (vs CY8C3446PVI-102)
- Same 48-pin integration level (vs CY8C3446PVA-092)
설계 노트
Use the 48-pin BSSOP land pattern and the manufacturer package drawing when defining the footprint. PSoC pins are multiplexed, so assign peripheral functions before finalizing traces; a pin intended for one function may not provide the same active state after programming. Place supply decoupling adjacent to the applicable VDD and VSS pins, keep sensitive analog routes short, and preserve the recommended ground-plane continuity under the device.
Design the supply rail for the full 1.71 V to 5.5 V device range while enforcing the limits of every connected peripheral. Confirm which I/O pins are powered in each operating mode and whether any pins tolerate voltages above the selected rail. Use local bulk and high-frequency decoupling, provide a controlled reset and power-up sequence, and verify brownout behavior in the system power states rather than assuming ideal rail transitions.
Do not treat a similar ordering suffix as automatically interchangeable without checking device-specific temperature, qualification, and electrical characteristics. The identified alternatives share the 50 MHz, 64 KB Flash, and 48-pin platform, but firmware and pin configuration still require review. Validate the programmed configuration against the package pin table, test unused pins after configuration, and run production programming checks using the exact target ordering code.
Assign analog-capable pins with awareness of configurable routing and external impedance requirements. Keep oscillator, programming, reset, and sensitive analog nets away from high-current switching paths, and maintain short return paths to the ground plane. Review whether the selected PSoC functions impose restrictions on adjacent pins or require particular termination components. A final signal-integrity review should include startup, sleep, wake, and maximum-clock conditions.
규정 준수 정보
Compliance attributes require confirmation from the manufacturer product documentation or current declaration files.