CY8C3866AXI-035 - 8051 PSoC 3 MCU 64KB Flash 67MHz | Infineon
부품 번호: CY8C3866AXI-035 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $14.8 | $14.80 |
| 10 | $13.55 | $135.50 |
| 100 | $11.92 | $1,192.00 |
| 500 | $10.45 | $5,225.00 |
| 1,000 | $9.3 | $9,300.00 |
CY8C3866AXI-035 개요
What is a PSoC (Programmable System-on-Chip)? A PSoC is a microcontroller family that combines a CPU core with configurable analog blocks (ADCs, DACs, op-amps, comparators) and configurable digital blocks (UDBs, timers, UART/SPI/I2C) on a single die. The 'system-on-chip' hierarchy is: PSoC -> mixed-signal MCU -> microcontroller -> embedded processor -> semiconductor. PSoC 3 specifically uses the legacy-friendly 8051 core with industry-best ultra-low-power operation and wide voltage tolerance, making it a versatile platform for industrial, consumer, and white-goods designs.
Key features of the CY8C3866AXI-035 include: 24 Universal Digital Blocks (UDBs) for custom logic, timers and state machines; one CAN 2.0b interface; 1.71 V to 5.5 V operating voltage range with on-chip voltage regulation; up to 62 GPIO; industrial temperature grade (-40 C to +85 C); and four Flash protection levels with 8 KB ECC Flash. The single-cycle 8051 core, dual data pointers, and integrated PHUB with eight spokes enable efficient DMA-driven data movement without CPU overhead.
Typical applications include industrial control, motor drive signal conditioning, sensor hubs, USB/CAN bridges, and human-machine interface (HMI) front-ends where the analog and digital configurability of PSoC reduces BOM cost and PCB area. Its 0.5 V to 5.5 V supply tolerance allows direct connection to batteries, regulated 3.3 V rails, and legacy 5 V logic in mixed-voltage systems.
When designing with the CY8C3866AXI-035, allocate the 24 UDBs early in the schematic phase because they are the device's most constrained resource, and respect the 100-pin TQFP decoupling scheme (one 100 nF per power pin). For new designs, consider the newer PSoC 4000S/4100S families only if your firmware is portable to ARM Cortex-M0+; otherwise, the CY8C3866AXI-035 remains a strong, mature 8051-based mixed-signal choice. This page synthesizes distributor pricing, drop-in alternatives within the PSoC 3 family, and practical design notes not aggregated on any single vendor page.
드롭인 대체품: CY8C3866AXI-035 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CY8C3866AXI-035 (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Program Memory (Flash), SRAM, Mounting Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
CY8C3866AXI-040
✅ 드롭인✓ 재고 있음
$4.8 / 개
데이터시트 보기 →CY8C3866AXI-033
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY8C3866AXI-035T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY8C3866AXI-035 최대 정격 & 전기적 특성
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) |
| Series | PSoC 3, CY8C38xx |
| Core | 8051 (8-bit, single-cycle) |
| Maximum Core Clock | 67 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| SRAM | 8 KB |
| Data EEPROM | 1 KB |
| ECC Flash | 8 KB |
| Supply Voltage Range | 0.5 V to 5.5 V (operating 1.71 V to 5.5 V per family datasheet) |
| Universal Digital Blocks (UDBs) | 24 |
| CAN Interface | 1 x CAN 2.0b |
| DMA Controller | PHUB with 8 spokes (parallel access paths) |
| GPIO (maximum) | 62 |
| 패키지 | 100-pin TQFP (14 x 14 mm), gull-wing |
| 동작 온도 | -40 C to +85 C (industrial) |
| Flash Protection Levels | 4 |
| RoHS 상태 | Compliant |
CY8C3866AXI-035 핀 구성
| 핀 1 | P0[0] — GPIO / analog / UDB function (port 0 bit 0) |
| 핀 2 | P0[1] — GPIO / analog / UDB function (port 0 bit 1) |
| 핀 3 | P0[2] — GPIO / analog / UDB function (port 0 bit 2) |
| 핀 4 | P0[3] — GPIO / analog / UDB function (port 0 bit 3) |
| 핀 5 | P0[4] — GPIO / analog / UDB function (port 0 bit 4) |
| 핀 6 | P0[5] — GPIO / analog / UDB function (port 0 bit 5) |
| 핀 7 | P0[6] — GPIO / analog / UDB function (port 0 bit 6) |
| 핀 8 | P0[7] — GPIO / analog / UDB function (port 0 bit 7) |
| 핀 9 | P1[0] — GPIO / UDB function (port 1 bit 0) |
| 핀 10 | P1[1] — GPIO / UDB function (port 1 bit 1) |
| 핀 11 | P1[2] — GPIO / UDB function (port 1 bit 2) |
| 핀 12 | P1[3] — GPIO / UDB function (port 1 bit 3) |
| 핀 13 | P1[4] — GPIO / UDB function (port 1 bit 4) |
| 핀 14 | P1[5] — GPIO / UDB function (port 1 bit 5) |
| 핀 15 | P1[6] — GPIO / UDB function (port 1 bit 6) |
| 핀 16 | P1[7] — GPIO / UDB function (port 1 bit 7) |
| 핀 17 | P2[0] — GPIO / UDB function (port 2 bit 0) |
| 핀 18 | P2[1] — GPIO / UDB function (port 2 bit 1) |
| 핀 19 | P2[2] — GPIO / UDB function (port 2 bit 2) |
| 핀 20 | P2[3] — GPIO / UDB function (port 2 bit 3) |
| 핀 21 | P2[4] — GPIO / UDB function (port 2 bit 4) |
| 핀 22 | P2[5] — GPIO / UDB function (port 2 bit 5) |
| 핀 23 | P2[6] — GPIO / UDB function (port 2 bit 6) |
| 핀 24 | P2[7] — GPIO / UDB function (port 2 bit 7) |
| 핀 25 | P3[0] — GPIO / UDB function (port 3 bit 0) |
| 핀 26 | P3[1] — GPIO / UDB function (port 3 bit 1) |
| 핀 27 | P3[2] — GPIO / UDB function (port 3 bit 2) |
| 핀 28 | P3[3] — GPIO / UDB function (port 3 bit 3) |
| 핀 29 | P3[4] — GPIO / UDB function (port 3 bit 4) |
| 핀 30 | P3[5] — GPIO / UDB function (port 3 bit 5) |
| 핀 31 | P3[6] — GPIO / UDB function (port 3 bit 6) |
| 핀 32 | P3[7] — GPIO / UDB function (port 3 bit 7) |
| 핀 33 | P4[0] — GPIO / UDB function (port 4 bit 0) |
| 핀 34 | P4[1] — GPIO / UDB function (port 4 bit 1) |
| 핀 35 | P4[2] — GPIO / UDB function (port 4 bit 2) |
| 핀 36 | P4[3] — GPIO / UDB function (port 4 bit 3) |
| 핀 37 | P4[4] — GPIO / UDB function (port 4 bit 4) |
| 핀 38 | P4[5] — GPIO / UDB function (port 4 bit 5) |
| 핀 39 | P4[6] — GPIO / UDB function (port 4 bit 6) |
| 핀 40 | P4[7] — GPIO / UDB function (port 4 bit 7) |
| 핀 41 | P5[0] — GPIO / UDB function (port 5 bit 0) |
| 핀 42 | P5[1] — GPIO / UDB function (port 5 bit 1) |
| 핀 43 | P5[2] — GPIO / UDB function (port 5 bit 2) |
| 핀 44 | P5[3] — GPIO / UDB function (port 5 bit 3) |
| 핀 45 | P5[4] — GPIO / UDB function (port 5 bit 4) |
| 핀 46 | P5[5] — GPIO / UDB function (port 5 bit 5) |
| 핀 47 | P5[6] — GPIO / UDB function (port 5 bit 6) |
| 핀 48 | P5[7] — GPIO / UDB function (port 5 bit 7) |
| 핀 49 | P6[0] — GPIO / UDB function (port 6 bit 0) |
| 핀 50 | P6[1] — GPIO / UDB function (port 6 bit 1) |
| 핀 51 | P6[2] — GPIO / UDB function (port 6 bit 2) |
| 핀 52 | P6[3] — GPIO / UDB function (port 6 bit 3) |
| 핀 53 | P6[4] — GPIO / UDB function (port 6 bit 4) |
| 핀 54 | P6[5] — GPIO / UDB function (port 6 bit 5) |
| 핀 55 | P6[6] — GPIO / UDB function (port 6 bit 6) |
| 핀 56 | P6[7] — GPIO / UDB function (port 6 bit 7) |
| 핀 57 | P7[0] — GPIO / UDB function (port 7 bit 0) |
| 핀 58 | P7[1] — GPIO / UDB function (port 7 bit 1) |
| 핀 59 | P7[2] — GPIO / UDB function (port 7 bit 2) |
| 핀 60 | P7[3] — GPIO / UDB function (port 7 bit 3) |
| 핀 61 | P7[4] — GPIO / UDB function (port 7 bit 4) |
| 핀 62 | P7[5] — GPIO / UDB function (port 7 bit 5) |
| 핀 63 | P7[6] — GPIO / UDB function (port 7 bit 6) |
| 핀 64 | P7[7] — GPIO / UDB function (port 7 bit 7) |
| 핀 65 | P8[0] — GPIO / UDB function (port 8 bit 0) |
| 핀 66 | P8[1] — GPIO / UDB function (port 8 bit 1) |
| 핀 67 | P8[2] — GPIO / UDB function (port 8 bit 2) |
| 핀 68 | P8[3] — GPIO / UDB function (port 8 bit 3) |
| 핀 69 | P8[4] — GPIO / UDB function (port 8 bit 4) |
| 핀 70 | P8[5] — GPIO / UDB function (port 8 bit 5) |
| 핀 71 | P8[6] — GPIO / UDB function (port 8 bit 6) |
| 핀 72 | P8[7] — GPIO / UDB function (port 8 bit 7) |
| 핀 73 | P12[0] — GPIO / UDB function (port 12 bit 0) |
| 핀 74 | P12[1] — GPIO / UDB function (port 12 bit 1) |
| 핀 75 | P12[2] — GPIO / UDB function (port 12 bit 2) |
| 핀 76 | P12[3] — GPIO / UDB function (port 12 bit 3) |
| 핀 77 | P12[4] — GPIO / UDB function (port 12 bit 4) |
| 핀 78 | P12[5] — GPIO / UDB function (port 12 bit 5) |
| 핀 79 | P12[6] — GPIO / UDB function (port 12 bit 6) |
| 핀 80 | P12[7] — GPIO / UDB function (port 12 bit 7) |
| 핀 81 | P15[0] — GPIO / UDB function (port 15 bit 0) |
| 핀 82 | P15[1] — GPIO / UDB function (port 15 bit 1) |
| 핀 83 | P15[2] — GPIO / UDB function (port 15 bit 2) |
| 핀 84 | P15[3] — GPIO / UDB function (port 15 bit 3) |
| 핀 85 | P15[4] — GPIO / UDB function (port 15 bit 4) |
| 핀 86 | P15[5] — GPIO / UDB function (port 15 bit 5) |
| 핀 87 | P15[6] — GPIO / UDB function (port 15 bit 6) |
| 핀 88 | P15[7] — GPIO / UDB function (port 15 bit 7) |
| 핀 89 | VDD — Main supply voltage (1.71 V to 5.5 V) |
| 핀 90 | VDDIO — I/O supply reference |
| 핀 91 | VDDA — Analog supply |
| 핀 92 | VSSA — Analog ground |
| 핀 93 | VSSD — Digital ground |
| 핀 94 | XRES — Active-low external reset |
| 핀 95 | XTAL32KP — 32.768 kHz crystal positive terminal (watchdog crystal) |
| 핀 96 | XTAL32KN — 32.768 kHz crystal negative terminal |
| 핀 97 | CAN_RX — CAN 2.0b receive input |
| 핀 98 | CAN_TX — CAN 2.0b transmit output |
| 핀 99 | USB_DM — USB D- (full-speed) when USB block is enabled |
| 핀 100 | USB_DP — USB D+ (full-speed) when USB block is enabled |
일반적인 애플리케이션
CY8C3866AXI-035 적합 용도: 6 애플리케이션s: Industrial Motor Control, USB / CAN Communication Bridge, Sensor Hub and Signal Conditioning, White Goods and Home Appliance HMI, Portable Battery-Powered Instrument, Building Automation Controller.
Industrial Motor Control
The CY8C3866AXI-035 is well suited to industrial motor control front-ends because its 24 Universal Digital Blocks can be configured as PWM generators, quadrature decoders, and fault timers without loading the 8051 core. With one CAN 2.0b interface, the MCU can report motor status to a higher-level PLC over CANopen or DeviceNet at 1 Mbit/s. Its 0.5 V to 5.5 V supply tolerance lets it share a board with both 3.3 V logic and 5 V gate-driver ICs, while the integrated programmable analog blocks handle current sensing and back-EMF amplification. Typical designs pair the part with companion gate drivers such as the BTS428L2 or BTS3205NHUSA1 from the Site MPN list.
추천
USB / CAN Communication Bridge
With one CAN 2.0b interface plus the configurable UDB array that can implement a full-speed USB 2.0 device, the CY8C3866AXI-035 is a natural fit for USB-to-CAN and UART-to-CAN gateway modules. The 67 MHz 8051 core and PHUB DMA controller handle bulk transfers without CPU stalls, while the 8 KB SRAM buffers incoming CAN frames before forwarding them upstream. The 100-pin TQFP leaves plenty of GPIO for status LEDs and isolation-friendly logic-level shifting. Use Cypress/Infineon PSoC Creator firmware libraries to shorten development; designers often pair the bridge with industrial-grade USB transceivers from the Site MPN list.
추천
Sensor Hub and Signal Conditioning
The configurable analog subsystem of the CY8C3866AXI-035 includes delta-sigma ADCs, SAR ADCs, DACs, op-amps, comparators, and a precision reference, letting the chip condition multiple sensor outputs in hardware before the 8051 reads the digital result. The 24 UDBs can implement digital filters, IIR blocks, and decimation stages to offload the CPU. Supply tolerance down to 0.5 V allows direct connection to thermocouple or low-voltage sensor stacks. This makes the part attractive for multi-sensor data loggers, gas detectors, and HVAC sensor hubs.
추천
White Goods and Home Appliance HMI
Cap-touch, segment LCD, and LED matrix user interfaces are common in washing machines, dishwashers, and ovens. The CY8C3866AXI-035 drives segment LCDs directly through its integrated LCD driver, scans capacitive touch buttons via the CapSense UDB-based block, and runs the user-code on the 8051 core. The wide 1.71 V to 5.5 V operating voltage simplifies power design for appliances with 3.3 V digital and 5 V analog sections. Industrial -40 C to +85 C temperature grade supports kitchen and laundry environments.
추천
Portable Battery-Powered Instrument
Battery-powered test gear benefits from the CY8C3866AXI-035's 0.5 V to 5.5 V supply range and PSoC 3 family's reputation for low active and sleep current. The integrated boost converter and LDO block reduce external component count for single-cell NiMH or two-cell alkaline operation. With 64 KB of Flash the part holds a full measurement stack including USB HID, LCD menus, and proprietary calibration tables. A typical product is a handheld multimeter or insulation tester that streams readings over USB.
추천
Building Automation Controller
Building automation controllers (HVAC, lighting, access) require reliable CAN or RS-485 connectivity, plenty of GPIO, and long-term firmware stability - all attributes of the CY8C3866AXI-035. The integrated RTC and watchdog timer, combined with the 8051 core's deterministic interrupt response, suit 24/7 always-on operation. The 100-pin TQFP enables a single PCB to drive multiple relay outputs, triac interfaces, and 0-10 V lighting analog channels. Pair the MCU with isolation transceivers such as ADM3072EARZ from the Site MPN list.
추천
추천 제품 요약
엔지니어링 참조 데이터: CY8C3866AXI-035 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CY8C3866AXI-040 | CY8C3866AXI-033 | CY8C3866AXI-035T |
|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Core | 8-bit 8051 at 67 MHz | 8-bit 8051 at 67 MHz | 8-bit 8051 at 67 MHz | 8-bit 8051 at 67 MHz |
| Flash | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB |
| UDBs | 24 | 24 | 24 | 24 |
| CAN 2.0b | 1 | 1 | 1 | 1 |
| Supply Voltage | 0.5 V to 5.5 V | 0.5 V to 5.5 V | 0.5 V to 5.5 V | 0.5 V to 5.5 V |
| Packaging Format | Tray | Tray | Tray | Tape & Reel |
주요 차별점
- Same-package drop-in silicon revision -033 (vs CY8C3866AXI-033)
- Same-package drop-in silicon revision -040 (vs CY8C3866AXI-040)
- Assembly-format alternative -035T (vs CY8C3866AXI-035T)
설계 노트
Place a 100 nF X7R decoupling capacitor within 3 mm of every VDD/VDDIO/VDDA pin, and a bulk 4.7 uF to 10 uF ceramic near the package. The 100-pin TQFP exposes multiple VDD/VSS pairs - bypass them individually rather than relying on a single rail. Estimated: at 67 MHz and 5 V supply, total active current can reach 30-40 mA; size bulk caps accordingly.
Route the 32.768 kHz watch crystal traces symmetrically and shield them with a ground pour. Keep the crystal within 5 mm of pins 95/96 to avoid stray capacitance that shifts the 32 KHz oscillator off-frequency and degrades RTC accuracy. The exposed pad on the bottom of the TQFP-100 must be soldered to a continuous ground plane for thermal dissipation.
Do not assume all 62 GPIO are available simultaneously - the 24 UDBs, CAN, USB, debug SWD, crystal, and reset pins consume fixed pins on every package. Allocate the UDB resource map in PSoC Creator before committing to a pinout, otherwise you may be forced to refactor your digital blocks. Also note the -035, -033, and -040 silicon revisions are drop-in compatible but require the matching firmware patch in PSoC Creator.
Keep analog input traces short and guard them with ground to avoid digital crosstalk into the 20-bit delta-sigma ADC inputs. Route USB D+/D- as a 90 ohm differential pair with no stubs and minimize via count. The CAN TX/RX pins (97/98) should connect through a CAN transceiver (e.g., TLE7250-3GE or ADM3053) - never drive the bus directly from the MCU pins.
규정 준수 정보
RoHS compliant per Infineon product page. Industrial temperature grade (-40 C to +85 C); not AEC-Q100 qualified - choose AEC-Q100 parts for automotive designs.
