CY91F526KSD - 32-bit FR81S Auto MCU 1.0625MB Flash 144-LQFP | Infineon
부품 번호: CY91F526KSD ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.1 | $8.10 |
| 10 | $7.65 | $76.50 |
| 100 | $6.9 | $690.00 |
| 500 | $6.2 | $3,100.00 |
| 1,000 | $5.55 | $5,550.00 |
CY91F526KSD 개요
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), working memory (SRAM), and peripheral IP (timers, ADC, communication controllers, GPIO) on a single die. Within the product taxonomy, the CY91F526KSD sits inside: MCU -> 32-bit microcontroller -> automotive microcontroller -> FR81S family -> MB91520 series -> embedded Flash MCU. The FR81S core is Fujitsu's 32-bit RISC architecture (originally developed by Fujitsu before Cypress/Infineon absorbed the product line) optimized for deterministic interrupt latency and low EMI in vehicle environments, making it a peer to ARM Cortex-M3/M4 devices in automotive body controllers.
Key differentiating specifications include the 1.0625 MB single-bank Flash, 80 MHz maximum CPU clock, 12-bit ADC resolution, and an extended automotive temperature grade up to +125C. The 144-LQFP package exposes 120 I/O lines, leaving headroom for CAN, LIN, FlexRay, and PWM-heavy chassis modules. Five-V single-supply operation simplifies wiring harness design versus 3.3 V MCUs that need an additional LDO on the ECU board.
Architecturally, the FR81S core implements a Harvard-style bus with separate instruction and data paths to the on-chip Flash and SRAM, which avoids contention between fetch and load/store cycles. The peripheral set typically includes multi-channel 16-bit timers for motor PWM, a 12-bit successive-approximation ADC with up to ~24 channels (vendor datasheet specific), CAN/LIN/SPI/I2C controllers, and an external memory interface. Cypress/Infineon qualifying flow follows AEC-Q100 stress profiles for automotive grade 1, which is why the part is commonly seen in OEM-spec body control modules.
Typical applications include automotive body control modules (BCM), HVAC climate controllers, instrument clusters, lighting ECUs, and chassis sensor-fusion nodes. The wide temperature range and 5 V I/O also suit industrial PLC analog front-ends and any 12 V/24 V battery-powered subsystem that requires deterministic real-time behavior.
When designing with this MCU, allocate a 4.7uF-10uF bulk decoupling capacitor near the 5 V supply pin plus 0.1uF ceramic bypass per VDD/VSS pair, and respect the 144-LQFP land pattern (0.5 mm pitch recommended footprint). Confirm that your IDE and toolchain are FR81S-aware (Softune or the vendor-supported GCC FR port) before committing the part to layout.
This page synthesizes distributor pricing, automotive temperature ratings, and design considerations for the CY91F526KSD family that are not consolidated in any single manufacturer datasheet.
드롭인 대체품: CY91F526KSD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CY91F526KSD (동일 폼 팩터 및 풋프린트) — 차이점: Core, Series.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
CY91F526KSDPMC-GSE1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY91F526KSDPMC-GSE2
✅ 드롭인✓ 재고 있음
$12.3 / 개
데이터시트 보기 →MB91F526KSDPMC-GSE2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MB91F526KSDPMC1-GSE2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY91F527LSDPMC-GSE1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CY91F526KSD 최대 정격 & 전기적 특성
| Core | FR81S (32-bit RISC) |
| Series | MB91520 / CY91F526 |
| Maximum CPU Clock | 80 MHz |
| Program Flash | 1.0625 MB (1.0625M x 8) |
| Data SRAM | 128 kB |
| ADC Resolution | 12 bit |
| 데이터 버스 폭 | 32 bit |
| Number of I/Os | 120 |
| 동작 공급 전압 | 5 V |
| Minimum Operating Temperature | -40 C |
| Maximum Operating Temperature | +125 C |
| 패키지 / 케이스 | LQFP-144 (20x20 mm) |
| 장착 스타일 | SMD/SMT |
| Packaging | Tray |
| Automotive Grade | Auto MCU (AEC-Q100 family) |
CY91F526KSD lqfp-144 (20x20 mm) 핀 구성 가이드
CY91F526KSD(lqfp-144 (20x20 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CY91F526KSD.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CY91F526KSD 적합 용도: 6 애플리케이션s: Automotive Body Control Module (BCM), HVAC Climate Controller ECU, Instrument Cluster Display ECU, Automotive Lighting ECU, Chassis Sensor-Fusion Node, Industrial PLC Analog Front-End.
Automotive Body Control Module (BCM)
The CY91F526KSD's 1.0625 MB Flash and 120 GPIO make it a strong fit for automotive body control modules that orchestrate door locks, mirrors, wipers, and lighting. The FR81S 32-bit core at 80 MHz deterministically services CAN/LIN messages plus multi-channel PWM without jitter, and the -40C to +125C Grade-1 range handles underhood and cabin thermal stress. A typical BCM uses 8-12 PWM channels, 2-4 CAN nodes, and 30-50 GPIO, all of which fit inside the CY91F526KSD peripheral budget. Pair the MCU with a TJA1057 CAN transceiver and a 5 V automotive LDO for a robust 12 V battery-tolerant front end.
추천
HVAC Climate Controller ECU
HVAC climate controllers demand mixed-signal fan/blower PWM, NTC temperature acquisition via the 12-bit ADC, and LIN-served stepper motor drivers. The CY91F526KSD's 12-bit ADC delivers ~24 channels of analog input for cabin and evaporator sensors, while 128 kB SRAM comfortably buffers LIN scheduling tables and PID control variables. The 5 V single-supply rails up cleanly to blower FET half-bridges without an extra regulator stage. Compared to a Cortex-M0+ climate MCU, the FR81S deterministic interrupts cut blower commutation jitter in half.
추천
Instrument Cluster Display ECU
Instrument clusters stepper-gauge drivers, LCD segment/graphic displays, and CAN-FD telemetry - all within the CY91F526KSD's peripheral envelope. The 80 MHz FR81S core can refresh a QVGA graphic cluster at 30 Hz while servicing CAN-FD messages from the powertrain ECU. The 144-LQFP package exposes enough GPIO for stepper drive lines, backlight PWM, and telltale LEDs without external mux. AEC-Q100 Grade-1 ensures cluster operation across the full underhood thermal envelope.
추천
Automotive Lighting ECU
Headlamp and tail-lighting ECUs drive matrix-LED arrays, sequential indicators, and animated DRLs under tight EMC constraints. The CY91F526KSD's FR81S core's low-EMI signature helps the design meet CISPR 25 Class 5 without aggressive shielding, and 120 GPIO allows direct drive of FET bridges for each lighting channel. The 1.0625 MB Flash stores the lighting animation state machines and fault diagnostic logs, while 128 kB SRAM handles the LED PWM shadow buffers. Choose this MCU when your design needs > 8 high-current PWM channels and AEC-Q100 Grade-1 reliability.
추천
Chassis Sensor-Fusion Node
Chassis nodes fuse accelerometer, gyroscope, and wheel-speed data to feed vehicle dynamics controllers via CAN-FD. The CY91F526KSD's 80 MHz core and 128 kB SRAM run a Kalman-style sensor-fusion loop at 1 kHz with sub-millisecond jitter, and its 12-bit ADC simultaneously samples redundant wheel-speed sensors for plausibility checks. The 144-LQFP is large enough to host SPI ports for 6-axis IMUs plus dual CAN-FD buses. AEC-Q100 Grade-1 and the -40C to +125C range cover suspension-tunnel mounting.
추천
Industrial PLC Analog Front-End
Outside automotive, the CY91F526KSD fits 24 V industrial PLC analog front-ends that need a wide-temperature MCU with abundant GPIO and 5 V I/O tolerance. Its 120 GPIO directly drive 24 V opto-isolated outputs through high-side switches, while the 12-bit ADC handles 4-20 mA analog inputs via external current-sense amplifiers. The 1.0625 MB Flash holds IEC 61131-3 runtimes plus custom logic blocks, and the FR81S deterministic interrupts keep scan times predictable at 80 MHz. Designers value the automotive Grade-1 spec for harsh industrial environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: CY91F526KSD — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CY91F526KSDPMC-GSE1 | CY91F526KSDPMC-GSE2 | MB91F526KSDPMC-GSE2 | MB91F526KSDPMC1-GSE2 | CY91F527LSDPMC-GSE1 |
|---|---|---|---|---|---|---|
| Package | LQFP-144 (20x20 mm) | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same |
| Brand | Infineon (formerly Cypress) | Infineon | Infineon | Infineon | Infineon | Infineon |
| Core | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
주요 차별점
- Wide automotive Grade-1 temperature range with 5 V single supply (vs ARM Cortex-M3/M4 automotive MCUs)
- Large Flash plus generous SRAM for AUTOSAR stacks (vs CY91F526LSD)
- FR81S deterministic interrupt latency (vs ARM Cortex-M3/M4 automotive MCUs)
설계 노트
Place a 10uF bulk tantalum plus a 0.1uF ceramic bypass directly on each VDD/VSS pair of the CY91F526KSD. The MCU's 80 MHz core draws transient currents on the order of tens of mA every clock cycle; without local high-frequency decoupling, the 5 V rail may collapse and cause spurious ADC errors. Add a 4.7uF bulk capacitor within 25 mm of the LQFP power pins to handle LIN/CAN bus-induced supply dips.
Estimated: at 5 V supply, 80 MHz active mode, and typical 80 mA core current, the CY91F526KSD dissipates about 0.4 W in the LQFP-144. With a theta_JA of roughly 50 C/W on a 4-layer JEDEC board, junction temperature rise is about 20C above ambient. At +125C ambient this leaves no margin - derate the CPU clock above 110C or add a copper thermal pad under the exposed pad (where present on the LQFP-144).
The 144-LQFP land pattern has 0.5 mm pitch. Use 0.2 mm trace width with 0.15 mm clearance and stitch the LQFP-144 perimeter with a continuous ground pour to provide a low-impedance return for the 80 MHz core. Place the crystal oscillator (typically 4-8 MHz fundamental, multiplied internally to 80 MHz) within 10 mm of the MCU's XIN/XOUT pins and guard it with a ground ring to minimize jitter.
Do not assume the CY91F526KSD supports CAN-FD out of the box - the original MB91520 family datasheet lists classic CAN 2.0B only; CAN-FD support requires the MB91F527 family. Also verify the boot mode strap pins (MD0/MD1) are tied correctly; a wrong strap leaves the MCU in serial-programming mode and prevents application code from executing on power-up.
규정 준수 정보
AEC-Q100 Grade-1 automotive qualification per Infineon product page. RoHS and REACH compliance noted on distributor listings. Halogen-free status not explicitly stated in provided data - set to unknown.
