Vishay Intertechnology

DG401AK - Dual High-Speed SPST Analog Switch | Vishay

부품 번호: DG401AK ✓ 활성
35 ohm Rds(on) 16-pin CERDIP Package
MOQ: 1 |

DG401AK 개요

The Vishay Siliconix DG401AK is a dual, normally open CMOS analog switch with two independent SPST circuits, a 1:1 signal configuration, 35 ohm on-resistance, and a 16-pin CERDIP package. It is designed for low-power, high-speed signal routing where low insertion resistance, compact logic-driven control, and reliable packaged operation are important.

An analog switch is a semiconductor device that uses digital control signals to connect or disconnect analog signal paths. The DG401AK belongs to the analog switch and switch-matrix hierarchy, where the SPST configuration provides one selectable path per circuit. Its CMOS implementation supports low-power operation and high-speed switching, making the device suitable for test equipment, signal routing, instrumentation, and communication systems.

The principal features are two switch circuits, normally open SPST behavior, a 1:1 routing configuration, and a specified 35 ohm on-resistance. These characteristics allow it to serve as a building block in larger switch matrices and signal-selection networks. The CERDIP package provides a through-hole mechanical format and is intended for applications where leaded components and conventional PCB assembly methods are preferred.

The DG401AK uses independent control and common-source switching structures within a dual analog-switch package. Because each channel is normally open, the default state presents a high-impedance path until the corresponding control input activates its channel. The low-power CMOS architecture is particularly useful when system power consumption, switching speed, and signal-path isolation must be balanced in the same compact package.

Typical uses include multimeter and oscillometer signal selection, automated test equipment, data-acquisition front ends, sample-and-hold systems, analog signal routing, and communication or instrumentation interfaces. In each application, the DG401AK can isolate unused signal branches or connect a source to a downstream measurement channel while the control logic determines the active path.

Designers should pay close attention to the 35 ohm on-resistance and the complete timing, voltage, and logic-level specifications in the manufacturer datasheet. Place the device so that sensitive analog traces remain short, provide adequate return paths, and account for off-state leakage, control timing, and switch capacitance when establishing signal-integrity limits.

This product page consolidates package identification, verified distributor specifications, practical application guidance, and pin-compatible sourcing options. It is intended to help engineers compare the DG401AK with military-qualified and manufacturer-labeled versions while keeping the required 16-pin CERDIP footprint and electrical architecture in view.

드롭인 대체품: DG401AK — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

DG401AK/883

✅ 드롭인
📦 16-pin CERDIP
Distinct /883 ordering code with the same dual SPST architecture and 16-pin CERDIP format; on-resistance is listed as 45 ohm, approximately 29% above the DG401AK value of 35 ohm

📋 참조 대체품 (카탈로그에 없음)

DG401AK/883B

✅ 드롭인
📦 16-pin CERDIP
Revised /883B ordering code with the same dual high-speed SPST architecture and 16-pin ceramic-DIP format; the listed on-resistance is 30 ohm, approximately 14% below the DG401AK value of 35 ohm

📋 참조 대체품 (카탈로그에 없음)

DG401AK

✅ 드롭인
Vishay Intertechnology
📦 16-pin CERDIP
2 circuits · 1:1 · 2 independently controlled SPST switches · 35 ohm · 16-pin CERDIP · 16 terminals · Through-hole DIP · No

가격 문의

데이터시트 보기 →

DG401AK

✅ 드롭인
Vishay Intertechnology
📦 16-pin CERDIP
2 circuits · 1:1 · 2 independently controlled SPST switches · 35 ohm · 16-pin CERDIP · 16 terminals · Through-hole DIP · No

가격 문의

데이터시트 보기 →

DG401AK

✅ 드롭인
Vishay Intertechnology
📦 16-pin CERDIP
2 circuits · 1:1 · 2 independently controlled SPST switches · 35 ohm · 16-pin CERDIP · 16 terminals · Through-hole DIP · No

가격 문의

데이터시트 보기 →

DG401AK 최대 정격 & 전기적 특성

Number of Circuits 2 circuits
Switch Configuration 1:1
Number of Switches 2 independently controlled SPST switches
On-Resistance 35 ohm
패키지 16-pin CERDIP
Number of Terminals 16 terminals
실장 유형 Through-hole DIP
Surface-Mount Capability No
Switch State Normally open
Technology CMOS analog switch
Switching Class Low-power, high-speed
AEC-Q100 Qualification Not applicable

DG401AK 16-pin cerdip 핀 구성 가이드

DG401AK(16-pin cerdip 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

DG401AK의 16-pin cerdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: DG401AK.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

DG401AK 적합 용도: 6 애플리케이션s: Automated Test Equipment Signal Routing, Data-Acquisition Front End, Analog Multiplexer Signal Selection, Instrumentation Signal Isolation, Sample-and-Hold Signal Control, Communication Interface Switching.

🔧

Automated Test Equipment Signal Routing

The DG401AK fits automated test equipment because two independent 1:1 SPST channels can select or isolate analog paths under separate control signals. Its 35 ohm on-resistance adds a defined series impedance that should be included in the measurement path, while low-power, high-speed CMOS switching supports short acquisition-cycle decisions. Place each switch near the routed source or instrument input, use a solid ground reference, and allow the control signal to settle before sampling. The 16-pin CERDIP package is suitable for leaded test-fixture and backplane assemblies where through-hole robustness is preferred over board area.

🖥️

Data-Acquisition Front End

The DG401AK can route or isolate two analog inputs in a data-acquisition front end when the system requires compact, independently controlled SPST paths. Its 1:1 configuration preserves the selected signal topology, and the 35 ohm on-resistance must be compared with the source and ADC input impedances to determine whether loading is acceptable. The dual normally open arrangement allows unused channels to remain isolated while a measurement is active. For sensitive high-impedance sources, minimize trace length, provide clean grounding, and account for switch capacitance and leakage in the acquisition error budget.

🌐

Analog Multiplexer Signal Selection

The DG401AK can serve as a building block in an analog multiplexer or switch matrix because each package supplies two normally open, independently controlled SPST paths. A 1:1 signal configuration supports straightforward selection networks, although multiple packages may be required to build larger matrices. The 35 ohm path resistance should be evaluated against signal amplitude, source impedance, and downstream accuracy requirements. For high-frequency routing, use short controlled-impedance traces and minimize parasitic capacitance, while ensuring that the control-driver timing and supply levels satisfy the device requirements.

📡

Instrumentation Signal Isolation

The DG401AK is useful in instrumentation designs that need to isolate one of two measurement paths. Its normally open behavior leaves a channel disconnected until its control input is asserted, reducing unwanted interaction between source and instrument when the path is inactive. With a specified on-resistance of 35 ohm, it is better suited to moderate-impedance systems than to precision divider networks where resistance variation would directly impair accuracy. Confirm off-isolation and leakage limits in the manufacturer datasheet, and keep the analog traces short and symmetric for predictable behavior.

⚡

Sample-and-Hold Signal Control

The DG401AK can control the connection of two candidate signals in a sample-and-hold or switched-measurement circuit. The low-power, high-speed CMOS switch supports rapid path selection, while the dual SPST organization allows independent control of related channels. Designers should verify the switch transition time, control-logic levels, and charge injection against the settling requirements of the downstream amplifier or converter. A solid ground plane, short analog connections, and deliberate return paths help prevent control-edge coupling from appearing as an error on the held signal.

🌐

Communication Interface Switching

The DG401AK can select between low-frequency communication or control signals when the design requires two isolated 1:1 routes in a single through-hole package. The dual normally open structure supports disconnecting inactive branches and limiting signal contention when control logic has established the intended route. The 35 ohm on-resistance should be checked against line-driver and receiver impedances, and the complete bandwidth, supply, logic-threshold, and off-isolation limits should be confirmed before deployment. Short branch routing and a continuous ground reference are important when minimizing crosstalk and ground-potential effects.

추천 제품 요약

DG401AK/883B Military-ordering DG401-family alternative 사용처: Automated Test Equipment Signal Routing, Data-Acquisition Front End, Instrumentation Signal Isolation, Sample-and-Hold Signal Control, Communication Interface Switching DG401AK/883 Screened DG401-family alternative 사용처: Automated Test Equipment Signal Routing, Analog Multiplexer Signal Selection, Sample-and-Hold Signal Control DG401AK Vishay Intertechnology 사용처: Data-Acquisition Front End, Analog Multiplexer Signal Selection, Instrumentation Signal Isolation, Communication Interface Switching
What is the DG401AK and what does it do?
The DG401AK is a dual, normally open CMOS analog switch that routes two independent SPST signal paths. Vishay identifies it as a 2-circuit, 1:1 integrated-circuit switch with 35 ohm on-resistance in a 16-pin CERDIP package. According to the manufacturer DG401 product page, the device belongs to a low-power, high-speed analog-switch family designed for rapid connection and isolation of analog signals.
What are the key specifications of DG401AK that engineers should know?
The DG401AK provides two independent 1:1 SPST switch circuits, a specified 35 ohm on-resistance, normally open operation, and a 16-pin CERDIP package. The manufacturer describes the DG401 family as low-power, high-speed CMOS analog switches. Its exact supply range, switching time, leakage, off-isolation, and temperature limits must be selected from the manufacturer datasheet for the complete operating envelope.
What is the pinout of DG401AK?
The DG401AK uses a 16-pin CERDIP footprint, but a pin-by-pin terminal assignment cannot be reproduced reliably from the accessible product summaries. Use the pin-description table and package drawing in the DG401 manufacturer datasheet before assigning PCB tracks. The package is a through-hole DIP rather than a surface-mount device, so lead spacing and hole diameter must also be checked against the physical drawing.
Where can I download the DG401AK datasheet PDF?
The official DG401 datasheet and product resources are available from Analog Devices through the DG401 product page. The DG401AK was originally marketed by TEMIC and Maxim Integrated and is also listed under Vishay Siliconix, so ordering suffixes should be checked carefully. The manufacturer datasheet remains the controlling document for pin assignments, electrical limits, switching timing, and package dimensions.
Where can I buy DG401AK online?
Use the Request a Quote form on this page to request DG401AK availability, current commercial terms, and lead time for the exact 16-pin CERDIP ordering code. The part is also listed by several authorized supply channels, but package suffix, manufacturer labeling, and production status should be confirmed before ordering. XAIPART can quote the requested MPN without requiring a change to the target board.
What is the price of DG401AK?
Current DG401AK pricing is presented through the Request a Quote form on this page. Submit the exact MPN, desired quantity, and delivery destination to obtain a current quotation. The accessible product results identify the component and package but do not expose a complete quantity-break schedule for this exact ordering code, so no static unit price should be relied upon during budgeting.
What is the lead time for DG401AK?
The current lead time for DG401AK should be requested through the Request a Quote form on this page. Lead time can vary with the manufacturer label, package marking, production status, order quantity, and destination. The manufacturer DG401 page identifies the DG401 family as production, while distributor records confirm listings for the ceramic-DIP ordering code.
Is DG401AK in stock?
Use the Request a Quote form on this page to check current DG401AK stock and the manufacturer label associated with the requested quantity. Because this product is distributed under multiple source identities, including Vishay Siliconix, Maxim Integrated, and TEMIC, confirm that the quotation refers to the exact DG401AK 16-pin CERDIP configuration and not a related DG403, DG405, or military-suffix ordering code.
Is DG401AK suitable for test and measurement equipment?
The DG401AK is suitable for test and measurement signal routing because it combines two normally open SPST channels, 35 ohm on-resistance, and low-power, high-speed CMOS operation. Its dual 1:1 architecture can select or isolate analog paths in instrumentation and automated test systems. Confirm supply voltage, control thresholds, switching time, bandwidth, and off-isolation against the manufacturer datasheet before setting the end-to-end error budget.
When should I choose DG401AK over a single-channel analog switch?
Choose the DG401AK when the board needs two independent normally open SPST paths in one 16-pin CERDIP package. Its dual-channel arrangement can reduce routing complexity when both signals must be selected or isolated under separate control signals. Select a single-channel device instead when only one path is required, when package size dominates, or when the channel count cannot justify the fixed pin count.
What is the difference between DG401AK and DG401AK/883B?
DG401AK and DG401AK/883B both identify dual high-speed normally open SPST analog switches associated with the DG401 family and use a 16-pin ceramic-DIP format. The /883 suffix identifies a different ordering or qualification route and should be treated as a distinct manufacturer part number. Confirm the exact temperature grade, screening, marking, and procurement conditions before substituting one for the other.
What is the best drop-in replacement for DG401AK?
A valid DG401AK replacement must retain the 16-pin CERDIP footprint, two normally open SPST channels, compatible control logic, and a comparable 35 ohm on-resistance. The manufacturer-labeled DG401AK/883 and DG401AK/883B records are the closest qualified-ordering candidates identified for comparison, but their production and procurement terms should be verified. A complete replacement decision also requires matching supply voltage, timing, leakage, and temperature limits.
Can an Analog Devices or Maxim Integrated DG401AK replace the Vishay version?
An Analog Devices or Maxim Integrated DG401AK can be a candidate replacement only when its ordering code, 16-pin CERDIP pinout, electrical limits, and qualification status match the Vishay component. DG401AK is listed under several source identities because the DG401 family changed commercial ownership and sourcing channels. Verify the manufacturer datasheet and exact MPN rather than assuming that a shared base number guarantees identical procurement conditions.
Is DG401AK the same as DG401AK/883?
DG401AK and DG401AK/883 are related DG401-family ordering codes, but they are not automatically identical in procurement terms. Both are associated with a dual SPST switch and a 16-pin ceramic-DIP format, while the /883 suffix denotes a distinct manufacturer or screened ordering route. Check the suffix-specific temperature grade, marking, qualification, and datasheet before treating the two as interchangeable.
How should DG401AK be used in an automated test system?
Use each DG401AK control input to connect one normally open analog path while the inactive channel isolates its branch. Place the switch close to the signal source when source impedance is high, keep analog routing compact, and provide a continuous ground reference to minimize coupling. The 35 ohm on-resistance must be included in the total source-to-measurement impedance, and control timing should be settled before the acquisition.

엔지니어링 참조 데이터: DG401AK — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the DG401AK when the design requires two independent normally open SPST paths, a 1:1 routing arrangement, and a 16-pin CERDIP footprint with a listed 35 ohm on-resistance. It is particularly appropriate for test systems, instrumentation, and moderate-impedance analog-routing networks that value low-power CMOS switching and through-hole assembly. Consider DG401AK/883 when that specific screened ordering code is required, but account for its listed 45 ohm on-resistance. DG401AK/883B may offer a different manufacturer ordering route and a listed 30 ohm on-resistance, provided its suffix-specific qualification and procurement terms meet the application. Manufacturer-labeled DG401AK records from Analog Devices, Maxim Integrated, or TEMIC can be considered when documentation and sourcing conditions align. For any substitution, verify the exact 16-pin terminal map, supply range, control thresholds, switching timing, leakage, off-isolation, and temperature grade rather than relying only on the shared base number.

대체품과의 비교

파라미터 이 제품 DG401AK/883 DG401AK/883B DG401AK
Package 16-pin CERDIP 16-pin CERDIP 16-pin CERDIP 16-pin CERDIP
Brand Vishay Intertechnology Vishay Intertechnology Analog Devices Analog Devices, Maxim Integrated, and TEMIC Semiconductors
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits
Switch Configuration 1:1 1:1 SPST, 1:1 1:1
Switch State Normally open Normally open Normally open Normally open
Technology CMOS analog switch CMOS analog switch CMOS analog switch CMOS analog switch
Switching Class Low-power, high-speed Low-power, high-speed High-speed Low-power, high-speed
Mounting Type Through-hole DIP Through-hole DIP Through-hole DIP Through-hole DIP

주요 차별점

  • Lower listed on-resistance than the DG401AK/883 ordering code (vs DG401AK/883)
  • Both channels are integrated in one dual SPST package (vs A single-channel analog switch)
  • Through-hole ceramic-DIP construction supports leaded assembly (vs Surface-mount analog switches)

설계 노트

Treat the 35 ohm on-resistance as part of the complete signal-path impedance. For high-impedance sensors or precision dividers, verify that switch resistance, leakage, and variation do not exceed the measurement error budget. Keep the switched node compact, maintain a continuous ground reference, and place any required input or output capacitance close to the associated device pins.

The DG401AK uses a 16-pin CERDIP footprint, so preserve the manufacturer package drawing for lead spacing, hole diameter, and pin numbering. Orient the device consistently with the PCB footprint, avoid excessive force during insertion, and inspect solder fillets after through-hole reflow. Do not assign signal connections solely from the generic DIP outline; verify every terminal against the DG401 pin-description table.

Confirm control-logic thresholds, supply voltage, switching time, and allowable control timing before using the device with a new microcontroller or test controller. Because each channel is normally open, an asserted control state must correspond to the intended connection. Also verify the manufacturer label and suffix when replacing DG401AK with /883 or /883B ordering codes, since mechanical similarity does not establish identical qualification terms.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified in the product records used for this page. AEC-Q100 is not applicable because DG401AK is an analog interface switch rather than an automotive-qualified component.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

DG401AK datasheet DG401AK datasheet pdf DG401AK pinout DG401AK specifications DG401AK 16 pin CERDIP DG401AK dual SPST switch DG401AK Vishay Siliconix DG401AK equivalent DG401AK replacement DG401AK cross reference DG401AK price DG401AK stock DG401AK application circuit DG401AK vs DG401AK/883B

관련 부품 & 용어

Vishay Intertechnology DG401AK Analog Devices Maxim Integrated TEMIC Semiconductors DG401AK/883 DG401AK/883B analog switch switch matrix SPST normally open switch CMOS analog switch integrated-circuit switch interface IC 1:1 signal configuration on-resistance 35 ohm on-resistance CERDIP 16-pin CERDIP DIP package through-hole package low-power switching high-speed switching signal routing instrumentation
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기