Vishay Intertechnology

DG406DW - 16-Channel CMOS Analog Multiplexer | Vishay

부품 번호: DG406DW ✓ 활성
44 V Vdss 100 ohm Rds(on) 28-SOIC Package
MOQ: 1 |

DG406DW 개요

The Vishay Intertechnology DG406DW is a 16-channel, single-ended CMOS analog multiplexer that routes one of 16 inputs to a common output using a 4-bit binary address. It provides a maximum on-resistance of 100 ohm, 15 pC charge injection, a 200 ns transition time, low power dissipation of 0.2 mW, and single-supply operation with a 44 V maximum supply rating. The device is packaged in a 28-SOIC package.

An analog multiplexer is a semiconductor switch that connects multiple analog signal sources to one shared processing channel. It belongs to the interface IC hierarchy and reduces the number of input pins required by measurement, test, and routing systems. The DG406 is designed for single-ended routing, while companion devices in the DG406/DG407 family address differential multiplexing requirements.

Key features include break-before-make switching, which prevents two sources from momentarily being connected together during channel changes. The maximum on-resistance of 100 ohm helps limit signal attenuation in high-impedance measurement circuits. Low charge injection of 15 pC reduces the voltage disturbance generated when the address changes, and the 200 ns transition time supports relatively fast data acquisition.

Internally, the DG406 uses CMOS switching elements controlled by four address inputs and an inhibit function. Address decoding determines which of the 16 source channels connects to the common drain. Break-before-make operation protects sensitive measurement front ends from accidental source-to-source shorts, while the low 0.2 mW power dissipation suits remote and battery-operated instrumentation.

Typical uses include high-speed data acquisition, audio signal switching and routing, automated test equipment, avionics systems, and remote instrumentation. The device can also serve in instrumentation systems that scan multiple sensor outputs, provided the source impedance, acquisition time, charge injection, and supply voltage are evaluated together.

When laying out a DG406DW circuit, place the common output and selected input traces away from digital address lines, provide a solid ground reference, and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Check off-state leakage and switch capacitance before designing a high-impedance front end.

This page combines the manufacturer datasheet characteristics, package information, application guidance, comparison parameters, and practical design notes to support component selection, PCB implementation, and sourcing decisions for the DG406DW.

드롭인 대체품: DG406DW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

DG406DW-E3

✅ 드롭인
📦 28-SOIC
Same 16-channel mux, 100 ohm maximum on-resistance, and 28-SOIC footprint; ordering suffix identifies the E3 configuration

📋 참조 대체품 (카탈로그에 없음)

DG406DW 사양

Multiplexer Configuration 16:1 single-ended
Number of Channels 16 channels
Address Inputs 4 binary address inputs
Maximum On-Resistance 100 ohm
Nominal On-Resistance 50 ohm
Charge Injection 15 pC
Transition Time 200 ns
Power Dissipation 0.2 mW
Maximum Supply Voltage 44 V
Supply Capability Single supply
Switching Action Break-before-make
패키지 28-SOIC
실장 유형 Surface mount
Channel Matching 8 ohm maximum
On-Resistance Flatness 9 ohm maximum

DG406DW 핀 구성

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
핀 1 S1 — Source terminal for channel 1
핀 2 S2 — Source terminal for channel 2
핀 3 S3 — Source terminal for channel 3
핀 4 S4 — Source terminal for channel 4
핀 5 D1 — Drain terminal for channel 1
핀 6 D2 — Drain terminal for channel 2
핀 7 D3 — Drain terminal for channel 3
핀 8 D4 — Drain terminal for channel 4
핀 9 S5 — Source terminal for channel 5
핀 10 S6 — Source terminal for channel 6
핀 11 S7 — Source terminal for channel 7
핀 12 S8 — Source terminal for channel 8
핀 13 D5 — Drain terminal for channel 5
핀 14 D6 — Drain terminal for channel 6
핀 15 D7 — Drain terminal for channel 7
핀 16 D8 — Drain terminal for channel 8
핀 17 INH — Inhibit input
핀 18 V+ — Positive supply input
핀 19 A0 — Address input 0
핀 20 A1 — Address input 1
핀 21 A2 — Address input 2
핀 22 A3 — Address input 3
핀 23 D — Common drain output
핀 24 V- — Negative supply or ground connection
핀 25 S9 — Source terminal for channel 9
핀 26 S10 — Source terminal for channel 10
핀 27 S11 — Source terminal for channel 11
핀 28 S12 — Source terminal for channel 12

일반적인 애플리케이션

DG406DW 적합 용도: 6 애플리케이션s: Multichannel Data Acquisition, Audio Signal Switching and Routing, Automated Test Equipment Signal Routing, Remote Instrumentation and Sensor Scanning, Avionics and Multichannel Signal Routing, Industrial Control Signal Multiplexing.

📊

Multichannel Data Acquisition

The DG406DW suits systems that scan 16 single-ended sensor or test points into one shared acquisition channel. Its 200 ns transition time, 50 ohm nominal on-resistance, and 100 ohm maximum on-resistance provide a practical basis for fast channel selection, while break-before-make operation prevents two driven sources from being shorted during address changes. The 15 pC charge injection figure must be included in the settling calculation for high-impedance front ends. Use the common output and selected source route as a short analog trace, and verify the external acquisition time against the actual source impedance. The device is especially useful in compact instrumentation where routing 16 analog inputs individually to a converter would otherwise require substantially more board area.

🎧

Audio Signal Switching and Routing

The DG406DW can route one of 16 single-ended audio sources to a common amplifier or processing path. The 100 ohm maximum on-resistance is low enough for many line-level signal paths, and the 15 pC charge injection limits the switching transient that can appear as a click when the address changes. The 200 ns transition time is much faster than the response of many audio amplifiers, although system-level settling still depends on capacitance and the following stage. In a mixer or selector circuit, use a grounded return plane and keep the analog route away from digital address lines. Check the acceptable common-mode input range at the chosen supply voltage and consider an input buffer when driving a high-impedance volume control.

🏭

Automated Test Equipment Signal Routing

The DG406DW is appropriate for test systems that connect one of 16 measured or stimulus nodes to shared instrumentation. Its 16-channel architecture reduces the connector and routing count, while the 100 ohm maximum on-resistance and 200 ns transition time support low-frequency and medium-speed measurements. Break-before-make switching is important when different test sources may be active during relay-style transitions. The 8-ohm maximum channel-matching and 9-ohm maximum flatness specifications help when several channels are compared during calibration. Keep the selected analog path compact and route the four address inputs as a controlled digital group. Verify leakage, source impedance, and acquisition settling before using the device for very high-impedance or precision bridge measurements.

🧩

Remote Instrumentation and Sensor Scanning

The DG406DW fits remote or battery-operated instrumentation because its stated power dissipation is only 0.2 mW and it supports single-supply operation. Sixteen single-ended inputs can be scanned into one common measurement channel, reducing the number of external signal connections and simplifying enclosure wiring. The 44 V maximum supply rating provides headroom for protected industrial input networks, but the actual input range must be checked against the chosen supply. The 200 ns transition time allows the control system to change addresses rapidly, while 15 pC charge injection becomes more significant as sensor impedance rises. Use low-leakage protection networks and a high-impedance buffer where the source cannot tolerate switching transients.

✈️

Avionics and Multichannel Signal Routing

The DG406DW supports avionics applications that require selection among multiple single-ended signal paths. Its 16 channels, four-bit address interface, 44 V maximum supply rating, and break-before-make operation suit centralized signal-routing architectures where avoiding unintended channel shorts is essential. The manufacturer identifies avionics among the intended applications for the DG406 and DG407 family. Actual aircraft use still depends on the specific orderable configuration, qualification status, and operating-temperature requirements. Keep the analog routing symmetrical to reduce timing and offset differences, provide filtering appropriate for the protected signal source, and verify the logic thresholds of the address and inhibit inputs against the controlling system. Review the manufacturer datasheet for qualification and absolute-maximum requirements before release.

⚡

Industrial Control Signal Multiplexing

The DG406DW can consolidate 16 low-level control or sensor lines into one analog channel for an industrial controller. The single-supply capability and 0.2 mW power dissipation reduce system overhead, while the 50 ohm nominal and 100 ohm maximum on-resistance preserve signal integrity across moderate source impedances. Use break-before-make behavior when switching between outputs that remain active. The 15 pC charge injection transient can disturb a high-impedance comparator input, so allow adequate settling time or add a sampling-and-hold stage. Route the common analog node away from switching power stages, use a continuous ground reference, and keep address routing short. Confirm the input common-mode range and logic levels for the selected supply voltage.

What is the DG406DW used for?
The DG406DW is a 16-channel, single-ended CMOS analog multiplexer used to connect one of 16 input sources to a common output. According to the Vishay DG406 datasheet, a 4-bit binary address selects the active channel, while break-before-make switching prevents momentary shorts between sources. The 28-SOIC device is suited to data acquisition, audio routing, automated test equipment, avionics, and remote instrumentation.
How many channels and address inputs does the DG406DW have?
The DG406DW provides 16 single-ended channels controlled by 4 binary address inputs. Selecting one channel requires a four-bit address, and the inhibit function provides control over the mux state. The Vishay DG406 datasheet describes the DG406 as a 16-channel single-ended multiplexer connecting one of sixteen inputs to a common output as determined by the address.
What is the on-resistance of the DG406DW?
The DG406DW has a maximum on-resistance of 100 ohm and a nominal figure of 50 ohm. According to the Vishay DG406 datasheet, the redesigned device also provides guaranteed matching between channels of 8 ohm maximum and on-resistance flatness of 9 ohm maximum over the specified signal range. These values are important when the selected channel drives a high-impedance measurement front end.
What is the charge injection and transition time of the DG406DW?
The DG406DW specifies 15 pC charge injection and a 200 ns transition time. Charge injection creates a transient voltage pulse when the address changes, while transition time defines how quickly the channel path settles. The Vishay DG406 datasheet lists both figures as key characteristics for high-speed data-acquisition and signal-routing applications.
Where can I download the DG406DW datasheet PDF?
The official DG406DW datasheet PDF is available from Vishay at https://www.vishay.com/docs/70061/dg406.pdf. Use the pin-description table, electrical-characteristics table, and typical application diagrams in that document when assigning PCB tracks and calculating acquisition timing. A mirrored PDF is also listed at https://pdf.digi-electronics.com/pdf/2753/DG406DW-datasheet.pdf.
Where can I find the DG406DW pinout?
The DG406DW pinout is documented in the Vishay DG406 datasheet, where the 28-SOIC numbering identifies the 16 source terminals, eight drain terminals, four address inputs, inhibit, supply, common output, and ground. Use that pin-description table to assign tracks because the mux uses separate source and drain terminals rather than a repeating two-pin channel arrangement.
Can the DG406DW operate from a single supply?
Yes, the DG406DW supports single-supply operation and carries a 44 V maximum supply rating. The Vishay DG406 datasheet highlights single-supply capability as a core feature. Confirm the common-mode input range and output-swing limits for the intended supply voltage before designing a unipolar analog front end.
What is the best drop-in replacement for the DG406DW?
The DG406DW-E3 is the directly identified drop-in option for the DG406DW because both are 16-channel, 100-ohm, 28-SOIC versions of the same DG406 device family. It adds the manufacturer ordering suffix for the supported RoHS-compliant configuration. Verify the temperature grade and ordering requirements in the Vishay datasheet before approving it as a replacement.
What can replace the DG406DW in a 28-SOIC design?
The closest documented replacement is the DG406DW-E3, which retains the 16-channel single-ended configuration, 100-ohm maximum on-resistance, and 28-SOIC package. For a different DG406 ordering suffix, confirm the exact package width, temperature range, and lead configuration. Alternatives with narrow-SOIC or through-hole packages may require PCB changes and are not drop-in replacements.
Is the DG406DW the same as the DG406DW-E3?
The DG406DW and DG406DW-E3 are variants of the same Vishay DG406 16-channel multiplexer family and use the 28-SOIC package. Their principal distinction is the ordering suffix, which identifies the specific manufacturer configuration and compliance status. The Vishay DG406 datasheet remains the controlling document for pinout and electrical limits when changing between the orderable variants.
Is the DG406DW suitable for a 16-channel data acquisition system?
Yes, the DG406DW is suitable for many 16-channel data-acquisition systems because it provides 16 single-ended inputs, a 200 ns transition time, and break-before-make operation. According to the Vishay DG406 datasheet, high-speed data acquisition is a named application. Evaluate source impedance, settling time, charge injection, and acquisition-cycle timing to determine the actual channel rate.
When should I choose the DG406DW instead of another analog switch?
Choose the DG406DW when the design must route one of 16 single-ended analog inputs to a common output with four binary address inputs. It is preferable to a smaller switch when channel count matters more than absolute bandwidth, and to a discrete relay bank when 200 ns transitions and 15 pC charge injection are adequate. It is not the natural choice for differential channels, which require a multiplexer designed for that topology.
What is the best equivalent for the DG406DW from another manufacturer?
A confirmed cross-manufacturer drop-in equivalent is not established by the available manufacturer documentation, so the DG406DW-E3 remains the safest documented replacement. Any competitor device would need verification of the 28-SOIC footprint, 16-channel pin arrangement, address decoding, supply rating, on-resistance, charge injection, and switching logic. Treat a similar resistance rating alone as insufficient evidence of pin compatibility.
How do the DG406DW and DG406DW-E3 compare?
The DG406DW and DG406DW-E3 share the DG406 16-channel single-ended architecture and 28-SOIC package, and both are identified with a 100-ohm maximum on-resistance. The difference is the ordering suffix rather than a change in the mux function. For a like-for-like board substitution, confirm the exact configuration and temperature requirements in the Vishay DG406 datasheet.
Where can I buy the DG406DW online?
Use the Request a Quote form on this page to request current DG406DW availability, volume pricing, and lead time from XAIPART. The DG406DW is a Vishay 16-channel analog multiplexer in a 28-SOIC package, and the manufacturer lists the DG406 family in production. Provide your target quantity and required compliance or temperature configuration with the request.
What is the price and lead time of the DG406DW?
Current DG406DW pricing, stock status, minimum order quantity, and lead time are confirmed through the Request a Quote form on this page. Quote-based handling reflects the configured order quantity and supply conditions. For technical qualification, use the Vishay DG406 datasheet and provide the required package variant, quantity, and shipment destination with the request.
What are the key specifications of the DG406DW that engineers should know?
The DG406DW is a 16:1 single-ended CMOS analog multiplexer in a 28-SOIC package with a 100-ohm maximum on-resistance, 15 pC charge injection, 200 ns transition time, 0.2 mW power dissipation, and a 44 V maximum supply rating. The Vishay DG406 datasheet also specifies break-before-make switching, 8-ohm maximum channel matching, and 9-ohm maximum on-resistance flatness.

엔지니어링 참조 데이터: DG406DW — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the DG406DW when the design must route one of 16 single-ended analog sources to a common output and the 200 ns transition time and 15 pC charge injection meet the acquisition requirements. Choose the DG406DW-E3 when the same electrical and mechanical configuration is needed with the E3 ordering suffix. Neither part is the natural selection for differential signals, and related DG406 package variants with different body widths may require layout changes. A smaller analog switch is preferable when only a few channels are required or when switching bandwidth dominates. Confirm the operating-temperature grade, supply range, input common-mode limits, and exact 28-SOIC footprint before release.

대체품과의 비교

파라미터 이 제품 DG406DW-E3
Manufacturer Vishay Intertechnology Vishay Intertechnology
Package 28-SOIC 28-SOIC - same
Multiplexer Configuration 16:1 single-ended 16:1 single-ended - same
Number of Channels 16 channels 16 channels - same
Maximum On-Resistance 100 ohm 100 ohm - same
Charge Injection 15 pC 15 pC - same
Transition Time 200 ns 200 ns - same
Switching Action Break-before-make Break-before-make - same
Address Inputs 4 binary inputs 4 binary inputs - same

주요 차별점

  • Directly documented orderable configuration (vs DG406DW-E3)
  • Sixteen single-ended channels in one package (vs DG406DW-E3)
  • Low switching disturbance for analog routing (vs DG406DW-E3)

설계 노트

Treat the selected source and common drain as a matched analog path. Keep these traces short, avoid stubs, and provide a continuous ground reference beneath the analog region. The 15 pC charge injection produces a transient when the address changes; with high source impedance, that pulse can exceed the signal being measured. Add an input buffer or a sample-and-hold stage when the source impedance makes the switching disturbance unacceptable.

Separate the four address inputs, inhibit control, and supply connections from the common analog output to reduce capacitive coupling into the measurement path. Route the address group consistently and place the device close to the signal source when source impedance is high. Use the pin-description table in the manufacturer datasheet to confirm that the selected source terminal and its corresponding drain terminal are connected to the intended channel.

Do not assume that a 200 ns transition time alone determines the usable sampling rate. Acquisition time must also include amplifier settling, source impedance, capacitance, and charge injection recovery. Break-before-make prevents momentary input shorts, but it does not remove the switching transient at the common output. Validate the complete signal chain with the highest-impedance source and the fastest intended address sequence.

Decouple the supply pins locally with a ceramic capacitor and provide the ground return specified in the application circuitry. Although the mux power dissipation is specified at 0.2 mW, external load current and nearby circuitry can determine the temperature rise of the assembly. Check the supply rating, allowable input voltage, and absolute-maximum limits in the Vishay DG406 datasheet before applying protection-network voltages.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The DG406 family is listed as production on the manufacturer product page. The E3 ordering suffix identifies a RoHS-compliant configuration, but the exact compliance fields for the base DG406DW require confirmation on the Request a Quote form.

관련 검색

DG406DW datasheet DG406DW pinout DG406DW datasheet pdf DG406DW 28 SOIC DG406DW equivalent DG406DW replacement DG406DW vs DG406DW-E3 DG406DW drop in replacement DG406DW 16 channel mux DG406DW 100 ohm on resistance DG406DW data acquisition DG406DW price DG406DW stock Vishay DG406DW what is a 16 channel analog multiplexer

관련 부품 & 용어

Vishay Intertechnology Vishay Siliconix DG406DW DG406DW-E3 DG406 DG407 analog multiplexer CMOS analog switch interface IC single-ended mux 16-channel mux binary address decoding on-resistance charge injection transition time break-before-make switching single-supply operation 28-SOIC surface mount high-speed data acquisition audio signal routing automated test equipment avionics remote instrumentation
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기