Analog Devices

DG441CY+T - 4-Channel SPST Analog Switch | Analog Devices

부품 번호: DG441CY+T ✓ 활성
+10 V to +30 V Vdss 85 ohm maximum Rds(on) 16-lead SOIC Package
MOQ: 1 |

DG441CY+T 개요

The Analog Devices DG441CY+T is a four-channel, single-pole single-throw analog switch with 85 ohm on-resistance, operating in a 16-lead SOIC package. It provides improved on-resistance matching and flatness across the signal range, making it suitable for precision signal-routing systems. The device supports single-supply operation from +10 V to +30 V and bipolar operation from ±4.5 V to ±20 V.

An analog switch is a semiconductor device that routes electrical signals between circuit nodes under digital control. The DG441 belongs to the analog switch category within the broader signal-path and power-management ecosystem. Its four independent SPST channels can connect or disconnect analog, audio, instrumentation, communication, and battery-powered system signals while minimizing insertion loss and distortion.

Key features include 85 ohm maximum on-resistance, on-resistance matching of 4 ohm maximum between switches, and guaranteed on-resistance flatness of 9 ohm maximum over the signal range. The switching characteristics include turn-on time below 250 ns and turn-off time below 170 ns. These parameters make the device useful where controlled analog routing must coexist with digital control logic.

The DG441 family uses a 44 V silicon-gate CMOS process. Its logic-compatible control inputs and symmetric on-state conduction support signal routing in either direction. The low matching and flatness specifications help preserve amplitude consistency when multiple channels must behave similarly, which is important in measurement, communication, and audio systems.

Typical applications include audio-signal routing, battery-powered equipment, communication systems, fax equipment, instrumentation, and test systems. The device can be used to select between sensor sources, route test signals, disconnect loads, or preserve a common analog path while keeping control logic separated from the analog signal.

Designers should verify the positive and negative supply limits, control-logic levels, signal-range restrictions, and maximum switch current in the manufacturer datasheet. Place bypass capacitors close to the supply pins and route control traces away from sensitive analog inputs to reduce coupling and switching transients.

This product page combines package, performance, application, and selection guidance with a focused comparison against pin-compatible DG441-family devices. It is intended to help engineers identify the correct supply configuration, package variant, and replacement option before integrating the switch into a PCB design.

드롭인 대체품: DG441CY+T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: DG441CY+T (동일 폼 팩터 및 풋프린트) — 차이점: Package, Switch Configuration, Bipolar Supply Range, Logic Input Compatibility, Number of Switches.

Analog Devices
Package: 16-pin narrow SOIC
Switch Configuration: 1:1 multiplexer/demultiplexer
Number of Switches: 4 switches
비교 대상: DG441CY+T →
Analog Devices
Package: 16-SOIC, 0.154 inch body width
Switch Configuration: 1:1 SPST
Bipolar Supply Range: ±4.5 V to ±20 V
비교 대상: DG441CY+T →
Renesas Electronics
Package: 16-SOIC (0.154" / 3.90 mm width)
Logic Input Compatibility: TTL and CMOS, with on-chip Vref threshold translator
비교 대상: DG441CY+T →

DG441CY+

✅ 드롭인
Analog Devices
📦 16-SOIC
Quad SPST analog switch IC · 4 switches · 1:1 multiplexer/demultiplexer · SPST normally closed · 85 Ω · 4 Ω maximum · 9 Ω maximum over the signal range · 10 pC maximum

가격 문의

데이터시트 보기 →

DG441DY-T1-E3

✅ 드롭인
📦 16-SOIC
Same four-channel SPST normally closed configuration, 85 ohm on-resistance, and 16-SOIC package; manufacturer changes from Analog Devices to Vishay

📋 참조 대체품 (카탈로그에 없음)

DG441DY+T

✅ 드롭인
Analog Devices
📦 16-SOIC
4 · 1:1 SPST · 85 ohm · 50 ohm · +10 V to +30 V · ±4.5 V to ±20 V · Less than 250 ns · Less than 170 ns

가격 문의

데이터시트 보기 →

DG441DYZ

✅ 드롭인
Renesas Electronics
📦 16-SOIC
SPST (Single-Pole Single-Throw), 4 independent channels · 4 · 85 Ω (typical) · +5 V to +34 V · ±5 V to ±22 V · 44 V (allows 40 Vp-p signals) · 250 ns (typical)

가격 문의

데이터시트 보기 →

DG441DYZ

✅ 드롭인
Renesas Electronics
📦 16-SOIC
SPST (Single-Pole Single-Throw), 4 independent channels · 4 · 85 Ω (typical) · +5 V to +34 V · ±5 V to ±22 V · 44 V (allows 40 Vp-p signals) · 250 ns (typical)

가격 문의

데이터시트 보기 →

DG441CY+T 최대 정격 & 전기적 특성

Number of Channels 4 channels
Switch Configuration 4 x SPST, normally closed
On-Resistance 85 ohm maximum
On-Resistance Matching 4 ohm maximum between switches
On-Resistance Flatness 9 ohm maximum over the signal range
Turn-On Time Less than 250 ns
Turn-Off Time Less than 170 ns
Positive Single-Supply Range +10 V to +30 V
Bipolar Supply Range +/-4.5 V to +/-20 V
Process Technology 44 V silicon-gate CMOS
패키지 16-lead SOIC
실장 유형 Surface mount
Control Logic Compatibility TTL and CMOS compatible
Signal Conduction Symmetric, in either direction

DG441CY+T 16-lead soic 핀 구성 가이드

DG441CY+T(16-lead soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

DG441CY+T의 16-lead soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: DG441CY+T.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

DG441CY+T 적합 용도: 6 애플리케이션s: Audio Signal Routing, Communication Signal Routing, Battery-Powered Instrumentation, Test and Measurement Systems, Battery-Powered Signal Isolation, Analog Multiplexing.

🎧

Audio Signal Routing

The DG441CY+T suits audio-signal routing because each of its four SPST channels has an 85 ohm maximum on-resistance, while channel matching is specified at 4 ohm maximum and flatness at 9 ohm maximum. This helps maintain consistent signal amplitude when routing audio between amplifier, source, and test paths. The symmetric CMOS switch conducts in either direction, so the same device can support source selection or load isolation. According to the Analog Devices DG441 documentation, audio routing is an intended application. Designers should still verify bandwidth, distortion, signal amplitude, and switch-current limits for the specific audio circuit.

🌐

Communication Signal Routing

The DG441CY+T can route communication signals through four independently controlled, normally closed SPST channels. Its 85 ohm maximum on-resistance is suitable for many moderate-impedance routing paths, while less than 250 ns turn-on and less than 170 ns turn-off timing support controlled signal selection. The Analog Devices DG441 family explicitly identifies communication systems as an application. For higher-frequency or low-impedance nodes, engineers should confirm the complete frequency-response, capacitance, insertion-loss, and signal-range specifications before assigning the switch to a critical path.

🔧

Battery-Powered Instrumentation

The DG441CY+T is suitable for battery-powered instrumentation where four analog paths must be selected while preserving signal integrity and maintaining controlled off-state isolation. The family supports +10 V to +30 V single-supply or ±4.5 V to ±20 V bipolar operation, allowing integration into both single-ended and split-supply analog systems. Its 44 V silicon-gate process and improved channel matching can support repeatable measurements across multiple inputs. Because battery systems are sensitive to leakage and supply demand, the exact off-leakage, power-consumption, and allowable voltage limits must be checked in the manufacturer specifications.

🔧

Test and Measurement Systems

The DG441CY+T provides four normally closed switch sections for connecting test signals, selecting instrument paths, and isolating unused inputs. A maximum on-resistance of 85 ohm, matching of 4 ohm maximum between switches, and flatness of 9 ohm maximum help reduce channel-to-channel measurement variation. Its fast turn-on and turn-off timing also make it practical for automated routing sequences. The manufacturer lists test systems among the DG441 applications. For precision measurement, validate leakage, input impedance, contact resistance in the complete path, and ground offsets against the accuracy required by the instrument.

⚡

Battery-Powered Signal Isolation

The DG441CY+T can isolate inactive loads or disconnect alternate signal sources in battery-powered products because each SPST channel can be placed in a normally closed or open state through its control input. Four channels provide compact multiplexing without requiring four separate packages, and the 85 ohm maximum on-resistance can provide an acceptable insertion loss in suitable moderate-impedance circuits. The family explicitly supports battery-powered applications. Check the off-state leakage carefully because it can dominate standby power, and confirm that the control polarity and inactive-state behavior match the surrounding system logic.

🧩

Analog Multiplexing

The four SPST channels in the DG441CY+T can be combined with external circuitry to create compact analog multiplexing and source-selection arrangements. The normally closed topology provides a defined default connection, while the 85 ohm maximum on-resistance and 9 ohm maximum flatness help preserve signal consistency as different paths are selected. The manufacturer identifies communication and signal-routing uses for the DG441 family. When multiplexing precision sensors, verify the switch's leakage, charge injection, off-state isolation, and behavior over the full input range so the practical resolution remains suitable for the measurement system.

추천 제품 요약

DG441DY-T1-E3 Pin-compatible cross-brand analog switching alternative 사용처: Audio Signal Routing, Battery-Powered Instrumentation, Battery-Powered Signal Isolation DG441DYZ Renesas Electronics 사용처: Audio Signal Routing, Test and Measurement Systems, Analog Multiplexing DG441DY+T Analog Devices 사용처: Communication Signal Routing, Battery-Powered Signal Isolation DG441DY Same-package alternative for signal selection 사용처: Communication Signal Routing, Test and Measurement Systems DG441CY Analog Devices ordering-code alternative 사용처: Battery-Powered Instrumentation, Analog Multiplexing
What is the DG441CY+T?
The DG441CY+T is a four-channel, single-pole single-throw analog switch IC with an 85 ohm maximum on-resistance in a 16-lead SOIC package. According to the Analog Devices DG441 product page, the improved family provides on-resistance matching of 4 ohm maximum between switches and on-resistance flatness of 9 ohm maximum over the signal range. It is intended for controlled routing of analog signals in audio, communication, instrumentation, battery-powered, and test equipment.
What is the operating voltage of DG441CY+T?
The DG441CY+T operates from +10 V to +30 V in a single-supply configuration or from ±4.5 V to ±20 V in a bipolar configuration. According to the Analog Devices DG441 datasheet information, the 44 V silicon-gate process supports both positive and dual-supply operation. The applicable supply arrangement depends on the signal amplitude and system grounding requirements, so both rails must remain within the stated limits during startup and normal operation.
Where can I download the DG441CY+T datasheet PDF?
The official DG441CY+T datasheet and product information are available from Analog Devices through the DG441 product page at https://www.analog.com/en/products/dg441.html. The manufacturer page links the DG441 data sheet and product-selection information. Use the manufacturer document for the authoritative pin description, recommended operating conditions, electrical characteristics, supply arrangements, and package drawings when assigning PCB connections.
Where can I find the DG441CY+T pinout?
The DG441CY+T pin assignment is defined in the manufacturer DG441 data sheet and its 16-lead SOIC package drawing. The product page at https://www.analog.com/en/products/dg441.html provides the official documentation. The part contains four SPST normally closed switch channels with separate control and signal connections, so use the pin-description table rather than relying only on a generic SOIC-16 outline when routing traces.
What are the key specifications of DG441CY+T that engineers should know?
The DG441CY+T combines four normally closed SPST channels, 85 ohm maximum on-resistance, less than 250 ns turn-on time, and less than 170 ns turn-off time. According to the Analog Devices DG441 product information, it also supports +10 V to +30 V single-supply operation or ±4.5 V to ±20 V bipolar operation. On-resistance matching is 4 ohm maximum between switches, while flatness is 9 ohm maximum over the signal range.
How fast does the DG441CY+T switch?
The DG441CY+T has a turn-on time below 250 ns and a turn-off time below 170 ns, according to the Analog Devices DG441 product page. These timing values make the device suitable for moderate-speed analog routing, signal selection, and test-signal switching. When interpreting the timing, account for external control delay, capacitance, and the settling behavior of the driven circuit rather than treating the switching figures as complete end-to-end system latency.
Where can I buy DG441CY+T online?
The DG441CY+T can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, quotation, lot-size requirements, and lead-time confirmation. The Analog Devices product page remains the authoritative source for product status and documentation, while current fulfillment details should be confirmed directly through the quotation workflow rather than inferred from an older catalog listing.
What is the price of DG441CY+T?
The current DG441CY+T quotation is available through the Request a Quote form on this page. Pricing can depend on order quantity, shipment configuration, and current component availability, so the form should be used for a purchase quotation tied to the exact DG441CY+T ordering code. This page keeps commercial terms current by separating the structured pricing data from manually written technical guidance.
What is the lead time for DG441CY+T?
The current lead time for DG441CY+T should be confirmed through the Request a Quote form on this page. Include the required quantity, target shipment date, and acceptable packaging configuration in the request. Analog Devices lists the DG441 family as production, but production status alone does not establish a specific lot-level lead time or current inventory position.
Is DG441CY+T in stock?
Current DG441CY+T inventory should be confirmed through the Request a Quote form on this page. The form accepts the exact ordering code and requested quantity so the current supply position can be checked before a design is released for procurement. Do not base production scheduling on general distributor search results, because stock levels can change independently of the manufacturer's production lifecycle status.
What can replace DG441CY+T?
The DG441DY-T1-E3 from Vishay is a directly comparable four-channel SPST normally closed switch with 85 ohm on-resistance in a 16-SOIC package. It is a cross-brand drop-in candidate when the control, supply, signal-range, and electrical requirements match. DG441DY+T and DG441DYZ are additional Vishay DG441-family entries with the same package family, but final qualification should compare pin functions, supply limits, logic thresholds, leakage, and switching timing.
Is DG441CY+T the same as DG441DY-T1-E3?
The DG441CY+T and Vishay DG441DY-T1-E3 are both described as four-circuit, SPST, normally closed analog switches with 85 ohm on-resistance in 16-SOIC packages. That makes the DG441DY-T1-E3 the closest listed drop-in alternative. They are manufactured by different companies, so check the complete pin description and operating specifications before substitution, particularly the control logic, allowable signal range, and absolute maximum conditions.
When should I choose DG441CY+T over DG441DY-T1-E3?
Choose the DG441CY+T when the design requires the Analog Devices DG441 specification, established sourcing for the exact ordering code, or confidence in the manufacturer's DG441 documentation and production support. Choose the DG441DY-T1-E3 when its Vishay datasheet confirms equal pin functions and equivalent electrical limits and its commercial position is preferable. The listed shared 85 ohm on-resistance and 16-SOIC package simplify comparison, but do not replace a complete qualification review.
DG441CY+T vs DG441DY-T1-E3: which is better for precision signal routing?
The DG441CY+T is the safer default for a new design that specifies Analog Devices, while the DG441DY-T1-E3 is a credible second source when its complete electrical characteristics satisfy the application. Both are listed as four-channel SPST normally closed switches with 85 ohm maximum on-resistance in 16-SOIC packages. The deciding factors are guaranteed on-resistance matching and flatness, supply range, control thresholds, leakage, switching time, and lifecycle availability for the exact orderable part.
Is DG441CY+T suitable for audio and communication systems?
The DG441CY+T is suitable for audio-signal routing and communication systems because Analog Devices explicitly identifies those applications for the DG441 family. Its 85 ohm maximum on-resistance, 4 ohm maximum channel matching, and 9 ohm maximum flatness help reduce insertion-loss variation between channels. The final signal amplitude, bandwidth, distortion, and switch-current requirements must remain within the manufacturer's operating limits.
Does DG441CY+T meet RoHS and automotive qualification requirements?
RoHS and REACH status for the exact DG441CY+T ordering code must be confirmed from the manufacturer's product documentation or material-declaration record, and no automotive qualification is established by the technical information available here. For an AEC-Q100 design, select a part explicitly identified as automotive-qualified rather than assuming that the industrial DG441CY+T meets that requirement. Keep compliance documentation aligned with the exact manufacturer part number and package suffix.

엔지니어링 참조 데이터: DG441CY+T — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the DG441CY+T when the design specifies the Analog Devices DG441 family and needs four normally closed SPST channels with an 85 ohm maximum on-resistance in a 16-SOIC package. Its documented supply options, matching, flatness, and switching timing make it a strong fit for audio routing, communication systems, battery-powered equipment, and test-signal selection. The DG441DY-T1-E3 is the closest listed cross-brand alternative because it has the same channel count, SPST-NC configuration, on-resistance, and package. Consider DG441DY+T, DG441DY, or DG441DYZ when a Vishay source is preferred or when supply diversification is valuable. Before approving any substitution, compare the manufacturer pin descriptions, control-logic thresholds, leakage, signal-range limits, absolute maximum ratings, and timing values. For automotive or other regulated applications, verify qualification documentation separately rather than inferring it from the industrial DG441CY+T ordering code.

대체품과의 비교

파라미터 이 제품 DG441CY DG441DY-T1-E3 DG441DY+T DG441DY DG441DYZ
Brand Analog Devices Analog Devices Vishay Intertechnology Vishay Intertechnology Vishay Intertechnology Vishay Intertechnology
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Number of Channels 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Switch Configuration 4 x SPST, normally closed SPST, normally closed SPST, normally closed SPST, normally closed SPST, normally closed SPST, normally closed
On-Resistance 85 ohm maximum 85 ohm 85 ohm 85 ohm 85 ohm 85 ohm

주요 차별점

  • Identified pin-compatible second-source architecture (vs DG441DY-T1-E3)
  • Documented channel-to-channel resistance matching (vs DG441DY+T)
  • Fast control response for analog selection (vs DG441DYZ)
  • Manufacturer-direct DG441 documentation (vs DG441DY-T1-E3)

설계 노트

Route each control input away from the four analog signal paths and connect the device ground pins with a low-impedance return. Place supply bypass capacitors close to the supply pins, and keep the analog traces short where the switched source has high impedance. Because the DG441 provides four independently controlled channels, consistent grounding and short control traces help prevent switching transients from appearing as signal errors in adjacent channels.

Choose the supply arrangement from the Analog Devices operating conditions: +10 V to +30 V for single-supply operation or ±4.5 V to ±20 V for bipolar operation. Ensure that every signal remains within the permitted input range and that the control levels are valid for the selected rails. Do not assume that a logic-compatible control input permits operation outside the specified supply range; check absolute maximum and recommended operating conditions before power sequencing the board.

Do not treat the 85 ohm maximum on-resistance as a constant value across every signal condition. The DG441 family specifies 4 ohm maximum matching between switches and 9 ohm maximum flatness over the signal range, so the resistance can vary with signal amplitude and device conditions. Use the complete electrical-characteristics curves when designing divider networks, high-impedance sensors, precision gain stages, or paths where channel-to-channel resistance variation would affect the final measurement.

Check the physical pinout for the exact ordering code before placing a cross-manufacturer alternative. The DG441DY-T1-E3, DG441DY+T, DG441DY, and DG441DYZ candidates share the 16-SOIC package family, but package equivalence alone does not prove that control polarity, logic thresholds, supply limits, leakage, and absolute maximum conditions are identical. Perform a complete manufacturer-datasheet comparison before treating any listed alternative as a production drop-in replacement.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance status for the exact DG441CY+T ordering code was not established by the available manufacturer and distributor information. Automotive qualification is not claimed.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

DG441CY+T datasheet DG441CY+T pinout DG441CY+T datasheet pdf DG441CY+T equivalent DG441CY+T replacement DG441CY+T price DG441CY+T stock Analog Devices DG441CY+T DG441CY+T 16-SOIC pinout DG441CY+T 85 ohm switch DG441CY+T audio routing DG441CY+T vs DG441DY-T1-E3 DG441CY+T switching time DG441CY+T footprint

관련 부품 & 용어

Analog Devices DG441CY+T DG441CY DG441DY-T1-E3 DG441DY+T DG441DY DG441DYZ Vishay Intertechnology analog switch SPST switch normally closed switch monolithic CMOS analog switch signal routing IC interface IC 16-SOIC SOIC family surface-mount package on-resistance on-resistance matching on-resistance flatness turn-on time turn-off time TTL-compatible logic CMOS-compatible logic 44 V silicon-gate process
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기