DP83816AVNG-EX/NOPB - 10/100 Ethernet MAC/PHY | Texas Instruments
부품 번호: DP83816AVNG-EX/NOPB ✓ 활성DP83816AVNG-EX/NOPB 개요
An Ethernet controller is an interface IC that manages frame transmission and reception between a host computer and a physical network. A MAC handles protocol-level tasks such as frame assembly, addressing, error checking, and descriptor processing, while a PHY converts that logical data into signals suitable for twisted-pair cabling. In the system hierarchy, the DP83816 belongs to the networking-interface class, combines a MAC and PHY, and ultimately functions as a PCI-to-Ethernet interface semiconductor.
Key features include support for 10 Mb/s Ethernet and 100 Mb/s Fast Ethernet through the internal PHY, IEEE 802.3 compliance, and PCI V2.2 operation. Its bus-mastering architecture transfers packet descriptors and data directly between the device and host memory, with burst transfers of up to 128 dwords, or 512 bytes. The integrated design reduces external Ethernet-component count while supporting power-management features required by PC motherboards, adapter cards, and embedded systems.
Technically, the DP83816 combines a PCI bus master, PCI-to-MAC buffering, a 10/100 Ethernet MAC, and an internal physical-layer transceiver. The host communicates through the conventional PCI parallel interface, while the integrated PHY provides the network-side connection. This division of functions allows software to configure the controller and manage packet descriptors while bus mastering reduces host-processor involvement during data transfers. The advertised operating range extends from 0 °C to 85 °C for the EX-qualified ordering code.
Typical applications include legacy and industrial PCI motherboard designs, PCI Ethernet adapter cards, embedded Linux systems, industrial control equipment, and other embedded platforms requiring a 10/100 Mb/s network path. The controller is especially relevant where an existing PCI host bus is available and a conventional RJ45 magnetics-based Ethernet port is required.
Designers should preserve the controller's PCI, clock, reset, power, and analog-layout constraints from the manufacturer datasheet. The 20 mm by 20 mm LQFP requires careful plane assignment and thermal review, while the Ethernet magnetics and PHY-side network implementation must use the manufacturer-recommended topology and component values to maintain signal and thermal performance.
This page combines the device architecture, exact ordering information, package characteristics, drop-in replacement analysis, and practical implementation guidance for engineers evaluating the DP83816AVNG-EX/NOPB for PCI-based networking equipment.
드롭인 대체품: DP83816AVNG-EX/NOPB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DP83816AVNG-EX/NOPB (동일 폼 팩터 및 풋프린트) — 차이점: Package, Ethernet Data Rate, Physical Layer, Data Transfer Method, Host Interface.
DP83816AVNG/NOPB
✅ 드롭인가격 문의
데이터시트 보기 →DP83816AVNG-EX/NOPB 사양
| Product Type | Integrated PCI Ethernet MAC and PHY |
| Ethernet Data Rate | 10 Mb/s and 100 Mb/s |
| PCI Interface | PCI V2.2 at 33 MHz |
| Network Standard | IEEE 802.3 |
| Physical Layer | Internal 10/100 Base-T/TX PHY |
| Bus Mastering | Supported |
| Maximum PCI Burst Size | 128 dwords (512 bytes) |
| 공급 전압 | 3.3 V |
| 동작 온도 범위 | 0 °C to 85 °C |
| 패키지 | 144-LQFP (PGE), 20 mm × 20 mm |
| 핀 수 | 144 pins |
| 실장 유형 | Surface mount |
| Packaging | Tray |
| Lead-Free Status | Lead free |
| RoHS 상태 | RoHS compliant |
| Host Communications | PCI bus |
| Power Management Support | Supported |
| Target Markets | PC motherboards, adapter cards, embedded systems |
DP83816AVNG-EX/NOPB 144-lqfp (pge), 20 mm × 20 mm 핀 구성 가이드
DP83816AVNG-EX/NOPB(144-lqfp (pge), 20 mm × 20 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: DP83816AVNG-EX/NOPB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DP83816AVNG-EX/NOPB 적합 용도: 6 애플리케이션s: Legacy PCI Motherboard Ethernet, PCI Ethernet Adapter Card, Embedded Linux Network Controller, Industrial Control Gateway, Network Interface for Test Equipment, Embedded Networking for Security Equipment.
Legacy PCI Motherboard Ethernet
The DP83816AVNG-EX/NOPB fits a PCI motherboard or industrial mainboard that already exposes a 33 MHz PCI V2.2 bus and needs a 10/100 Mb/s Ethernet port. Its integrated MAC and internal PHY avoid a separate 10/100 physical-layer device, while bus mastering moves packet descriptors and data through the PCI interface with bursts up to 512 bytes. The 144-LQFP (PGE) package is substantial but remains practical for a motherboard layout with careful plane assignment. The EX ordering code supports operation from 0 °C to 85 °C, making it more appropriate than the base-temperature option for warmer industrial chassis when the surrounding system is designed for that range.
추천
PCI Ethernet Adapter Card
The DP83816AVNG-EX/NOPB can implement the network controller on a PCI adapter card for an embedded or industrial computer. A 10/100 Mb/s connection is sufficient for management traffic, serial gateways, factory configuration links, and supervisory data, while the PCI V2.2 interface supports conventional host-driver integration. Bus mastering reduces direct CPU handling of packet buffers, which is valuable in systems with limited processing capacity. The controller's internal Base-T/TX PHY simplifies the board architecture, although external Ethernet magnetics, line protection, and a connector remain necessary. Validate the magnetics selection, reference layout, isolation policy, and driver behavior against the manufacturer application guidance.
추천
Embedded Linux Network Controller
The DP83816AVNG-EX/NOPB is appropriate for an embedded Linux platform whose system bus exposes PCI and whose networking requirement is limited to 10/100 Mb/s. The integrated MAC and PHY simplify device-tree, driver, and board-support development by keeping the PCI and Ethernet media-access functions in one controller. Its bus-mastering operation supports direct descriptor and packet transfers, helping preserve host resources during sustained management traffic. The 0 °C to 85 °C EX temperature specification suits many industrial enclosures when proper airflow and chassis temperature are maintained. Deployment still requires validation of kernel driver support, interrupt routing, PHY behavior, and the exact network-magnetics reference design.
추천
Industrial Control Gateway
A DP83816AVNG-EX/NOPB-based PCI section can provide a dedicated 10/100 Mb/s management channel for an industrial controller, PLC peripheral, or production-cell gateway. Fast Ethernet is appropriate for supervisory protocols, diagnostics, configuration transfer, and local operator interfaces rather than high-bandwidth factory data. Integrating the MAC and PHY shortens the signal path between the PCI host and network physical layer, while bus mastering supports efficient handling of packet descriptors. The extended 85 °C maximum operating specification is important in sealed or densely populated equipment, although the complete enclosure thermal design must keep the controller within its rating. Use industrial-qualified external components where required by the system specification.
추천
Network Interface for Test Equipment
The DP83816AVNG-EX/NOPB can be used in PCI-based test and measurement equipment that needs a stable management or synchronization-network connection. The 10/100 Mb/s interface is sufficient for remote control, telemetry, test-sequence exchange, and laboratory data-transfer tasks. Its internal PHY reduces the number of external Ethernet components and helps maintain a consistent interface between the host and cable. For equipment distributed across industrial laboratories, the 0 °C to 85 °C EX temperature range provides useful design margin. Engineering evaluation should include sustained packet-load testing, interrupt-latency measurement, driver stability, cable compatibility, and verification of the PHY's configuration and link behavior in the intended environment.
추천
Embedded Networking for Security Equipment
The DP83816AVNG-EX/NOPB can support a 10/100 Mb/s management connection in a PCI-based access-control, surveillance, or industrial security appliance. The link is appropriate for video metadata, configuration traffic, alarms, and remote management rather than continuous high-resolution video streams. A single-chip MAC/PHY arrangement reduces board area and external interface count, and bus mastering leaves the host processor more available for primary control tasks. The 85 °C EX limit makes the device suitable for many enclosed installations when the system thermal profile is controlled. Designers must still assess network timing, packet-loss behavior under sustained load, driver isolation, and the security requirements of the overall appliance.
추천
추천 제품 요약
엔지니어링 참조 데이터: DP83816AVNG-EX/NOPB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DP83816AVNG/NOPB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 144-LQFP (PGE), 20 mm × 20 mm | 144-LQFP (PGE) |
| Ethernet Data Rate | 10/100 Mb/s | 10/100 Mb/s |
| Host Interface | PCI V2.2 at 33 MHz | PCI V2.2 at 33 MHz |
| Physical Layer | Internal 10/100 Base-T/TX PHY | Internal 10/100 Base-T/TX PHY |
| Maximum Burst Size | 128 dwords (512 bytes) | 128 dwords (512 bytes) |
| Supply Voltage | 3.3 V | 3.3 V |
| Network Standard | IEEE 802.3 | IEEE 802.3 |
| Bus Mastering | Supported | Supported |
주요 차별점
- Integrated MAC and PHY (vs Discrete MAC plus external 10/100 PHY implementations)
- Direct legacy PCI host integration (vs Modern PCIe Ethernet controllers)
- Host-efficient bus mastering (vs CPU-driven Ethernet controllers)
- Extended-temperature ordering option (vs DP83816AVNG/NOPB)
설계 노트
Treat the DP83816AVNG-EX/NOPB layout as a complete mixed-signal implementation rather than a generic 144-pin digital IC. Follow the manufacturer pin-description table and reference layout for PCI, clock, reset, power, ground, and PHY connections. Place the required bypass and decoupling capacitors adjacent to their assigned pins, and preserve the documented layer transitions and return paths. The Ethernet magnetics and connector section must also follow the manufacturer reference topology because trace geometry and return-path continuity directly affect signal integrity.
Review dissipation in the 20 mm by 20 mm LQFP (PGE) package using the manufacturer's thermal characterization data and the actual board construction. The EX ordering code permits operation to 85 °C, but package capability does not remove the need to control copper temperature, airflow, and nearby heat sources. Keep the device away from concentrated thermal sources and evaluate the assembled system at maximum ambient temperature. If the calculation indicates limited margin, improve copper spreading, ventilation, or board area before increasing operating temperature.
Do not substitute DP83816AVNG/NOPB for the EX-qualified ordering code without checking the system temperature limit. Both parts use the same 144-LQFP package and closely related controller functionality, but the EX version is explicitly identified for operation from 0 °C to 85 °C. Also avoid assuming that any Ethernet controller in the same speed class is a drop-in replacement: PCI signaling, reset requirements, register organization, driver expectations, and PHY pin connections must be reviewed before substitution.
Validate the 33 MHz PCI interface and Ethernet PHY connections with the manufacturer's recommended termination, clocking, and isolation strategy. Pay particular attention to clock jitter, reference-plane continuity, via transitions, and the separation between PCI, digital, power, and PHY-related nets. Because the device combines digital bus activity with an analog physical layer, a functional link test alone may not expose layout problems; review eye diagrams, ringing, and timing margins during hardware bring-up.
규정 준수 정보
The product listing identifies the 144-LQFP package as lead free and RoHS compliant. No automotive qualification or separate halogen-free declaration is stated.