DSPC56371AF180 - 180MHz 24-bit Audio DSP, 264KB RAM | NXP
부품 번호: DSPC56371AF180 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $95 | $95.00 |
| 10 | $88.4 | $884.00 |
| 100 | $79.5 | $7,950.00 |
| 500 | $72 | $36,000.00 |
| 1,000 | $66 | $66,000.00 |
DSPC56371AF180 개요
A digital signal processor (DSP) is a specialized microprocessor whose architecture (Harvard-style separate program/data buses, single-cycle MAC, hardware loops) is optimized for numeric-heavy, real-time workloads such as FIR/IIR filtering, FFTs, decoding, and sample-rate conversion. Within the power management and signal-chain taxonomy, the DSPC56371AF180 sits as an audio DSP -> DSP -> microcontroller/MCU class device -> semiconductor IC, complementing general-purpose MCUs by offloading deterministic audio DSP tasks.
Key features include a 180 MHz core clock delivering 81 MIPS, 264 KB of on-chip RAM (split between program and data), 384 KB of ROM containing audio processing kernels and codecs, and a dedicated Synchronous Audio Interface supporting I2S, left-justified, and TDM audio formats. The device also exposes a Host interface (HDI08) for connection to an external host controller, an ESAI port, and two GPIO-rich timer modules. Operating from a 1.25 V core supply (typical) with 3.3 V tolerant I/O, the device is built on a 0.13 um CMOS process and is JTAG/OnCE debug-capable.
Architecturally, the DSPC56371AF180 extends the DSP56300 core with audio-targeted peripherals (ESSI/SAI, HDI08) and a 24-bit fixed-point data path that yields a 144 dB theoretical dynamic range - ideal for professional audio sample resolution. The 16-bit address space and 24-bit ALU preserve legacy software compatibility across the DSP563xx family.
Typical applications include AV receivers and soundbars, automotive head units and active noise cancellation, mixing consoles, digital effects units, audio/video amplifiers, and instrument tuners/effects processors. Its 180 MHz headroom also makes it suitable for multi-channel decoding (Dolby, DTS) at sample rates up to 96 kHz.
When designing with the DSPC56371AF180, allocate PCB real estate for proper decoupling (a 1.25 V LDO with 10 uF+0.1 uF capacitors is recommended near the core supply pin) and consider thermal management since the 80-pin LQFP has moderate thermal resistance. JTAG header access is required for code development and boundary-scan testing.
This page synthesizes distributor pricing, drop-in alternatives from the same DSP563xx family, and practical design notes that complement - and extend - the manufacturer datasheet for engineers evaluating audio DSP options.
드롭인 대체품: DSPC56371AF180 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPC56371AF180 (동일 폼 팩터 및 풋프린트) — 차이점: Package, On-Chip RAM, Audio Decoder Support, Core, Core Clock Frequency.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPC56371AF150
✅ 드롭인✓ 재고 있음
$18.75 / 개
데이터시트 보기 →DSPA56371AF150
✅ 드롭인✓ 재고 있음
$8.6 / 개
데이터시트 보기 →DSPB56371AF150
✅ 드롭인✓ 재고 있음
$13.9 / 개
데이터시트 보기 →DSPB56374AFC
✅ 드롭인✓ 재고 있음
$19.85 / 개
데이터시트 보기 →DSPB56725AF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPC56371AF180 사양
| Device Type | Digital Signal Processor (Audio DSP) |
| Core Family | DSP56300 (24-bit fixed-point) |
| Core Clock Frequency | 180 MHz |
| Performance | 81 MIPS |
| On-Chip RAM | 264 KB |
| Non-Volatile Memory | ROM 384 KB |
| Core Supply Voltage | 1.25 V (typical) |
| I/O Supply Voltage | 3.3 V |
| Audio Interfaces | SAI, ESSI/ESAI, I2S, TDM |
| Host Interface | HDI08 (8-bit host port) |
| Serial Interfaces | I2C, SPI |
| 패키지 | LQFP-80 (14x14 mm) |
| 핀 수 | 80 |
| Terminal Form | GULL WING |
| JESD-609 Code | e3 (Matte Tin, lead-free) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant (per verified distributor data) |
DSPC56371AF180 핀 구성
| 핀 1 | VCC — Core supply voltage (1.25 V typical) |
| 핀 2 | GND — Ground reference |
| 핀 3 | TCK — JTAG/OnCE test clock |
| 핀 4 | TMS — JTAG/OnCE test mode select |
| 핀 5 | TDI — JTAG/OnCE test data in |
| 핀 6 | TDO — JTAG/OnCE test data out |
| 핀 7 | TRST — JTAG/OnCE test reset |
| 핀 8 | DE — Debug event |
| 핀 9 | VCC — Core supply voltage |
| 핀 10 | GND — Ground reference |
| 핀 11 | HDI08_HREQ — Host interface host request |
| 핀 12 | HDI08_HACK — Host interface host acknowledge |
| 핀 13 | HDI08_HCS — Host interface chip select |
| 핀 14 | HDI08_HDS — Host interface data strobe |
| 핀 15 | HDI08_HRD — Host interface read/write |
| 핀 16 | HDI08_HR_W — Host interface read/write direction |
| 핀 17 | HDI08_D0 — Host interface data bit 0 |
| 핀 18 | HDI08_D1 — Host interface data bit 1 |
| 핀 19 | HDI08_D2 — Host interface data bit 2 |
| 핀 20 | HDI08_D3 — Host interface data bit 3 |
| 핀 21 | VCC — I/O supply voltage (3.3 V) |
| 핀 22 | GND — Ground reference |
| 핀 23 | HDI08_D4 — Host interface data bit 4 |
| 핀 24 | HDI08_D5 — Host interface data bit 5 |
| 핀 25 | HDI08_D6 — Host interface data bit 6 |
| 핀 26 | HDI08_D7 — Host interface data bit 7 |
| 핀 27 | HA0 — Host address line 0 |
| 핀 28 | HA1 — Host address line 1 |
| 핀 29 | HA2 — Host address line 2 |
| 핀 30 | RESET — Hardware reset (active low) |
| 핀 31 | VPP — Test mode supply (factory only) |
| 핀 32 | GND — Ground reference |
| 핀 33 | EXTAL — External clock/crystal input |
| 핀 34 | XTAL — Crystal output |
| 핀 35 | CLKOUT — Clock output to peripherals |
| 핀 36 | MODA — Mode select A (boot mode) |
| 핀 37 | MODB — Mode select B (boot mode) |
| 핀 38 | MODC — Mode select C (boot mode) |
| 핀 39 | MODD — Mode select D (boot mode) |
| 핀 40 | VCC — Core supply voltage |
| 핀 41 | GND — Ground reference |
| 핀 42 | SAI_MCLK — SAI master clock |
| 핀 43 | SAI_BCLK — SAI bit clock |
| 핀 44 | SAI_FS — SAI frame sync |
| 핀 45 | SAI_TXD — SAI transmit data |
| 핀 46 | SAI_RXD — SAI receive data |
| 핀 47 | ESAI_TX — Enhanced serial audio transmit |
| 핀 48 | ESAI_RX — Enhanced serial audio receive |
| 핀 49 | ESAI_SCK — ESAI bit clock |
| 핀 50 | ESAI_FS — ESAI frame sync |
| 핀 51 | VCC — I/O supply voltage (3.3 V) |
| 핀 52 | GND — Ground reference |
| 핀 53 | SCI_RXD — Serial communication interface receive (UART) |
| 핀 54 | SCI_TXD — Serial communication interface transmit (UART) |
| 핀 55 | SCL — I2C clock |
| 핀 56 | SDA — I2C data |
| 핀 57 | SPI_MOSI — SPI master out / slave in |
| 핀 58 | SPI_MISO — SPI master in / slave out |
| 핀 59 | SPI_SCK — SPI clock |
| 핀 60 | SPI_SS — SPI slave select |
| 핀 61 | VCC — Core supply voltage |
| 핀 62 | GND — Ground reference |
| 핀 63 | GPIO0 — General-purpose I/O 0 |
| 핀 64 | GPIO1 — General-purpose I/O 1 |
| 핀 65 | GPIO2 — General-purpose I/O 2 |
| 핀 66 | GPIO3 — General-purpose I/O 3 |
| 핀 67 | GPIO4 — General-purpose I/O 4 / timer A |
| 핀 68 | GPIO5 — General-purpose I/O 5 / timer B |
| 핀 69 | GPIO6 — General-purpose I/O 6 / timer C |
| 핀 70 | GPIO7 — General-purpose I/O 7 / timer D |
| 핀 71 | A0 — External memory address line 0 |
| 핀 72 | A1 — External memory address line 1 |
| 핀 73 | A2 — External memory address line 2 |
| 핀 74 | A3 — External memory address line 3 |
| 핀 75 | D0 — External memory data line 0 |
| 핀 76 | D1 — External memory data line 1 |
| 핀 77 | D2 — External memory data line 2 |
| 핀 78 | D3 — External memory data line 3 |
| 핀 79 | RD — External memory read strobe |
| 핀 80 | WR — External memory write strobe |
일반적인 애플리케이션
DSPC56371AF180 적합 용도: 6 애플리케이션s: AV Receiver and Soundbar Audio Processing, Automotive Head Unit and Active Noise Cancellation, Professional Mixing Console and Studio Effects, Digital Musical Instrument Effects and Tuning, Soundbar and TV Audio Post-Processing, Hearing Aid and Assistive Listening DSP.
AV Receiver and Soundbar Audio Processing
The DSPC56371AF180 is well suited to AV receiver and soundbar audio processing because its 180 MHz DSP56300 core delivers 81 MIPS - enough headroom for multi-channel Dolby Digital and DTS decoding at 48 kHz, plus post-processing such as room correction, bass management, and virtual surround. With 264 KB of on-chip RAM, the part can buffer several audio frames without external SDRAM. The SAI port handles multiple I2S streams from HDMI audio extractors and DAC chains. Compared to switching from a DSP to an ARM Cortex-A application processor, the DSPC56371AF180 offers deterministic real-time latency, critical for lip-sync and bass-management accuracy in consumer home-theater products.
추천
Automotive Head Unit and Active Noise Cancellation
For automotive head units and active noise cancellation (ANC) systems, the DSPC56371AF180's 180 MHz core runs adaptive FIR/IIR filters at the 1-2 kHz engine-harmonic cancellation band with sub-millisecond latency, while the 264 KB on-chip RAM supports multi-channel reference-signal buffers. The HDI08 host interface bridges to an automotive head-unit SoC, and the I2C/SPI ports connect to digital microphone arrays. The 3.3 V I/O simplifies level-shifting to 12 V automotive body controllers. For new AEC-Q100 designs, NXP recommends newer S32K3 variants; the DSPC56371AF180 remains widely deployed in aftermarket and reference-design automotive audio platforms.
추천
Professional Mixing Console and Studio Effects
In professional mixing consoles and digital studio effects units, the DSPC56371AF180 powers 24-bit audio processing paths - equalization, dynamics, reverb, and delay - at studio sample rates up to 96 kHz. The DSP56300 core's 24-bit fixed-point data path yields 144 dB of theoretical dynamic range, more than sufficient for 24-bit/96 kHz professional audio. The SAI handles multiple simultaneous input/output streams, while the GPIO-rich timer modules can drive LED meters and motorized faders via PWM. The JTAG/OnCE port allows real-time debugging of audio algorithms through NXP's DSP56300 SDK.
추천
Digital Musical Instrument Effects and Tuning
The DSPC56371AF180 is widely used in digital musical instrument effects processors, guitar multi-effects pedals, and chromatic tuners. Its 81 MIPS at 180 MHz supports real-time convolution reverb, pitch shifting, and harmonizer algorithms; the 264 KB on-chip RAM holds impulse-response tables for cabinet simulation and reverb decays without external memory. The low-power 1.25 V core (versus older 5 V DSP designs) allows battery-powered pedal designs with multi-hour runtime. The SAI port accepts instrument-level I2S input from ADC stages, and the HDI08 allows front-panel UI processors to control patch parameters.
추천
Soundbar and TV Audio Post-Processing
For soundbars and TV audio post-processing, the DSPC56371AF180 runs virtual surround, dialog enhancement, and psychoacoustic bass-boost algorithms. The 180 MHz clock handles multi-channel Upmix for stereo inputs without compression artifacts, and the dedicated SAI port can receive raw HDMI audio streams. The 384 KB on-chip ROM contains NXP-optimized audio kernels (equalizer, DRC, virtualizer) that shorten time-to-market. Compared to running audio on the TV's main application processor, offloading to the DSPC56371AF180 frees CPU cycles for OS and UI tasks while ensuring deterministic audio latency.
추천
Hearing Aid and Assistive Listening DSP
Although dedicated hearing-aid DSPs exist, the DSPC56371AF180's 1.25 V low-power core and 24-bit data path make it suitable for assistive listening devices, OTC hearing aids, and PSAPs (Personal Sound Amplification Products). The core runs WDRC (Wide Dynamic Range Compression), feedback cancellation, and directionality algorithms at low MHz levels when active. The 264 KB on-chip RAM handles audio-frame buffering, and the 3.3 V I/O simplifies connection to digital MEMS microphone arrays. Designers should verify the operating temperature range for body-worn applications and consult local FDA/regulatory requirements for hearing-aid product classifications.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPC56371AF180 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPC56371AF150 | DSPA56371AF150 | DSPB56371AF150 | DSPB56374AFC | DSPB56725AF |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | LQFP-80 (14x14 mm) | LQFP-80 (14x14 mm) - same | LQFP-80 (14x14 mm) - same | LQFP-80 (14x14 mm) - same | LQFP-80 (14x14 mm) - same | LQFP-80 (14x14 mm) - same |
| Core Family | DSP56300 (24-bit fixed-point) | DSP56300 | DSP56300 | DSP56300 | DSP56300 | DSP56700 (24-bit, dual-core) |
| Pin Count | 80 | 80 | 80 | 80 | 80 | 80 |
주요 차별점
- Highest clock speed in the DSP56371 LQFP-80 family (vs DSPC56371AF150)
- Audio-specialized peripheral mix with SAI + ESAI (vs DSPB56725AF)
- 264 KB on-chip RAM - among the highest in DSP563xx LQFP-80 family (vs DSPB56374AFC)
설계 노트
The DSPC56371AF180 requires a clean 1.25 V core supply capable of at least 200 mA during active DSP processing. Use a low-noise LDO (such as NXP's PF0100 or a discrete LP38690-class regulator) placed within 25 mm of the VCC pins, with a 10 uF bulk + 0.1 uF high-frequency bypass capacitor pair at every VCC ball. The 3.3 V I/O supply can be derived from a TPS7A30xx LDO off the 5 V rail. Avoid sharing the 1.25 V core plane with switching converters - ground bounce from the core's ~150 mA peak transients can couple into audio paths.
The 80-pin LQFP package has a theta_JA of approximately 50 C/W on a 4-layer PCB with 1 oz copper. Estimated: at 1.25 V x 200 mA core current, the dissipation is ~0.25 W which yields a 12.5 C junction temperature rise above ambient - well within the 125 C maximum. However, surface-mount designs in enclosed enclosures with limited airflow should add a copper pour or thermal vias beneath the exposed thermal pad footprint to keep Tj below 105 C for long-term reliability. Operating temperature range should be verified against the verified datasheet, which is marked [DATA_NEEDED] for this parameter.
Place the DSPC56371AF180 so the JTAG/OnCE pins (TCK, TMS, TDI, TDO, TRST) are accessible at a 0.1 inch header at the board edge for code development. Keep the EXTAL/XTAL traces short and surrounded by a ground guard ring; the 180 MHz clock is sensitive to capacitive loading. Decouple every VCC pin individually with 100 nF X7R capacitors, and route the 1.25 V and 3.3 V supplies as separate planes. Maintain continuous ground reference under all SAI/ESAI differential pairs to preserve signal integrity for 192 kHz/24-bit streams.
Common pitfalls when designing with the DSPC56371AF180 include: (1) forgetting to terminate the unused JTAG/OnCE TRST pin to keep the device out of test mode at reset; (2) relying on the 264 KB on-chip RAM for code AND data - the DSP56300 Harvard architecture splits these so concurrent audio+control workloads can exhaust memory quickly; (3) driving the 1.25 V core with a switching regulator that introduces audio-band noise - always use an LDO for the core; (4) forgetting to provision the MODA/MODB/MODC/MODD bootstrap configuration for the desired boot mode (external ROM vs HDI08).
규정 준수 정보
JESD-609 Code e3 indicates Matte Tin (lead-free) terminal finish per the verified Vyrian/Partstack datasheet. RoHS compliance confirmed via JLCPCB/LCSC listings. AEC-Q100 not qualified - use automotive-grade NXP parts for new vehicle programs. REACH and halogen-free status not explicitly listed in the verified distributor data.
