DSPIC33CK32MP205-I/PT - 100MHz 16-Bit DSC 32KB Flash | Microchip
부품 번호: DSPIC33CK32MP205-I/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33CK32MP205-I/PT 개요
A digital signal controller combines the compute power of a digital signal processor (DSP) with the deterministic control and peripherals of a microcontroller (MCU). In the power-management hierarchy, the dsPIC33CK family sits at the top of Microchip's 16-bit DSC lineup: MCU core -> DSP-enhanced core -> DSC -> digital power and motor control platform. This makes DSCs the preferred device class for closed-loop control loops executing at switching frequencies of hundreds of kilohertz.
Key features include the 100 MHz dsPIC DSC core delivering up to 100 MIPS performance, a modified Harvard architecture, and Microchip's High-Resolution PWM with nanosecond-class resolution for switch-mode power conversion. The device also integrates three operational amplifiers and three comparators that offload current-sense amplification from external BOM, plus the programmable switched mode controller (PTG-class) peripheral noted by distributors.
On the technical side, the dsPIC33CK core supports single-cycle MAC and dual 40-bit accumulators for DSP filtering, DSP instruction acceleration, and fast interrupt handling for latency-critical control loops. Family members add ECC program Flash with Live Update dual-partition support and Memory Built-In Self-Test (MBIST) on SRAM; confirm exact availability on the 32 KB part in the manufacturer datasheet. Communication is handled by CAN FD alongside standard serial peripherals, enabling integration into automotive-adjacent and industrial fieldbus networks.
Typical applications include digital power supplies and PFC stages, brushless DC and PMSM motor drives (sensorless FOC), power factor correction, LED drivers, and advanced sensing and control nodes where high-resolution PWM plus on-chip analog front-ends shorten the signal chain.
A key design consideration is the 3.0V to 3.6V supply window: level-shift all 5V signals (including CAN transceivers and ICSP programming pairs PGECx/PGEDx) appropriately, and always pair ICSPCLK/ICSPDAT from the same PGEC/PGED channel pair during in-circuit serial programming.
This page synthesizes distributor data (Mouser, DigiKey, Octopart), Microchip's product pages, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-09-23.
드롭인 대체품: DSPIC33CK32MP205-I/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33CK32MP205-I/PT (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Core, PWM, Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33CK32MP205-E/PT
✅ 드롭인✓ 재고 있음
$1.92 / 개
데이터시트 보기 →DSPIC33CK128MP205-E/PT
✅ 드롭인✓ 재고 있음
$3.61 / 개
데이터시트 보기 →DSPIC33CK32MC105-E/PT
✅ 드롭인✓ 재고 있음
$1.55 / 개
데이터시트 보기 →DSPIC33CK32MC105-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.22 / 개
데이터시트 보기 →DSPIC33CK32MP205-I/PT 최대 정격 & 전기적 특성
| Core | dsPIC33CK 16-bit DSC core |
| Core Frequency | 100 MHz (up to 100 MIPS) |
| Program Flash | 32 KB |
| Data SRAM | 8 KB |
| Architecture | Modified Harvard, single-core |
| 공급 전압 | 3.0 V to 3.6 V |
| 동작 온도 | -40C to +85C (I grade) |
| On-chip Op Amps | 3 |
| On-chip Comparators | 3 |
| CAN Interface | CAN Flexible Data (CAN FD) |
| PWM | High-Resolution PWM |
| 패키지 | 48-pin TQFP (7x7 mm), PT |
| 실장 유형 | Surface Mount |
| Programming | ICSP via PGECx/PGEDx pairs |
| Family Flash Options | Up to 256 KB program Flash with ECC and Live Update (dual-partition) per family datasheet |
| Family SRAM Features | Up to 24 KB data SRAM with Memory Built-In Self-Test (MBIST) per family datasheet |
DSPIC33CK32MP205-I/PT 48-pin tqfp (7x7 mm), pt 핀 구성 가이드
DSPIC33CK32MP205-I/PT(48-pin tqfp (7x7 mm), pt 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33CK32MP205-I/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33CK32MP205-I/PT 적합 용도: 6 애플리케이션s: Digital Power Supplies and PFC, BLDC/PMSM Motor Control (Sensorless FOC), CAN FD Industrial and Automotive-Adjacent Networks, Advanced Sensing and Control Nodes, LED Drivers and Smart Lighting, Test, Measurement and Instrumentation Control.
Digital Power Supplies and PFC
The DSPIC33CK32MP205-I/PT is a natural fit for digitally controlled AC-DC and DC-DC power stages, where its 100 MHz core (up to 100 MIPS) and High-Resolution PWM deliver the duty-cycle resolution and loop bandwidth required for tight regulation. The three on-chip operational amplifiers condition current-shunt and voltage-divider feedback without external op amps, while the three comparators support fast cycle-by-cycle current limiting entirely in hardware. In a typical boost PFC or LLC converter, the DSC executes voltage and current compensation loops in DSP-accelerated C code, with the modified Harvard architecture enabling single-cycle MAC operations for filter arithmetic. Placed at the center of the control loop with CAN FD for supervisory communication, it replaces multiple discrete analog control ICs and reduces total BOM cost while enabling firmware-configurable output characteristics.
추천
BLDC/PMSM Motor Control (Sensorless FOC)
For brushless DC and permanent-magnet synchronous motor drives, the DSPIC33CK32MP205-I/PT integrates everything a field-oriented-control (FOC) loop needs: a 100 MHz DSP-enhanced core for Park/Clarke transforms and PI current loops, High-Resolution PWM for six-channel inverter gating, three op amps for low-side current-shunt amplification, and three comparators for hardware overcurrent trip. Sensorless algorithms such as sliding-mode or flux observers run comfortably in the DSP pipeline, with the 8 KB SRAM holding state observers and compensation history. Running FOC at 20-50 kHz control frequency, the core still retains headroom for communication stacks. The on-chip analog front-end is the decisive advantage: it eliminates external amplifier ICs in cost-sensitive appliance, pump, and fan drives while preserving sub-microsecond fault response through the comparator-to-PWM hardware trip path.
추천
CAN FD Industrial and Automotive-Adjacent Networks
The integrated CAN Flexible Data (CAN FD) module lets the DSPIC33CK32MP205-I/PT act as an intelligent control node on industrial fieldbuses and body/sensor networks, bridging real-time control and network communication on one chip. CAN FD payloads up to 64 bytes at higher arbitration-free data rates reduce bus load in distributed motor-control and telemetry systems compared to classical CAN. The 100 MHz core concurrently services the control loop and the CAN stack, while the 32 KB Flash supports robust bootloader implementations for field firmware updates. In a typical topology the DSC reads current and position via its op amps and comparators, executes local closed-loop control at 100 MIPS-class throughput, and reports status over CAN FD to a higher-level controller - eliminating a separate communication microcontroller and its inter-processor latency.
추천
Advanced Sensing and Control Nodes
Microchip positions the dsPIC33CK family for advanced sensing and control, and the DSPIC33CK32MP205-I/PT exemplifies why: the three op amps amplify low-level sensor signals (thermistors, pressure bridges, current shunts), the three comparators create fast threshold alarms, and the 100 MHz DSP core runs digital filtering (IIR/FIR) with single-cycle MAC throughput. The modified Harvard architecture keeps data and instruction fetches parallel, sustaining DSP-class sample rates for vibration, acoustic, or power-quality analysis. The 8 KB SRAM buffers waveform captures for condition-monitoring uploads over serial links or CAN FD. Because amplification, digitization, decision logic, and communication all live on one 7x7 mm 48-TQFP die, the signal chain noise floor improves relative to discrete multi-chip designs, and the -40C to +85C industrial grade covers harsh factory-floor environments.
추천
LED Drivers and Smart Lighting
High-resolution PWM makes the DSPIC33CK32MP205-I/PT well suited to digitally controlled LED drivers, where dimming resolution and flicker-free operation depend on fine pulse-width granularity. The High-Resolution PWM provides duty-cycle steps far finer than standard 8-bit MCU PWM, enabling smooth deep-dim LED current control in architectural, horticultural, and stage lighting. The on-chip op amps sense LED current through shunt resistors for closed-loop constant-current regulation, and the comparators implement instant hardware-level overcurrent shutdown if a string shorts. Running dimming curves, color-mixing math, and DALI-style protocol handling in DSP-accelerated firmware, the 100 MHz core outpaces typical 8-bit lighting MCUs while CAN FD (or serial peripherals) integrates the fixture into building automation networks - all within a compact 48-pin TQFP footprint.
추천
Test, Measurement and Instrumentation Control
In compact instrumentation, the DSPIC33CK32MP205-I/PT serves as the real-time control and signal-processing engine: the DSP core executes averaging, windowing, and FFT pre-processing on sampled data, while three op amps drive DAC-referenced bias networks and three comparators guard supply and input rails. The 100 MHz / 100 MIPS throughput supports deterministic sample timing for stimulus-response measurement sequences, and High-Resolution PWM generates fine-adjust reference or chopping signals. The 32 KB Flash stores calibration tables and state machines, and 8 KB SRAM holds transient capture buffers. With CAN FD, USB-bridge-class serial peripherals, and ICSP programming (using any matched PGECx/PGEDx pair), the device integrates cleanly into production test fixtures and bench instruments where one chip must combine control, math, and communication at industrial temperature grades.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33CK32MP205-I/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33CK32MP205-E/PT | DSPIC33CK128MP205-E/PT | DSPIC33CK32MC105-E/PT |
|---|---|---|---|---|
| Package | 48-TQFP (7x7 mm), PT | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 100 MHz (up to 100 MIPS) | 100 MHz | 100 MHz | 100 MHz |
| Program Flash | 32 KB | 32 KB | 128 KB | 32 KB |
| Operating Temperature | -40C to +85C (I grade) | Extended grade (-E), higher than -I | Extended grade (-E) | Extended grade (-E) |
| CAN FD | Yes | Yes | Yes | Yes |
주요 차별점
- Integrated analog front-end reduces BOM (vs DSPIC33CK32MC105-E/PT)
- Lowest memory in family limits firmware headroom (vs DSPIC33CK128MP205-E/PT)
- Industrial temperature vs extended temperature grade (vs DSPIC33CK32MP205-E/PT)
설계 노트
Power the DSPIC33CK32MP205-I/PT from a clean 3.3V rail within the 3.0V-3.6V operating window. Place a 10uF bulk capacitor at the board entry and 0.1uF low-ESR ceramic capacitors at every VDD/VSS pin pair, within a few millimeters of the pins, following standard Microchip dsPIC decoupling practice. When switching a 1uF-class decoupling network across a 3.3V rail the estimated transient currents from the 100 MHz core are modest, but ripple from an adjacent power stage can couple into the ADC reference - separate analog and digital return paths on the PCB. Estimated guidance based on general Microchip layout practice, not a datasheet figure.
ICSP programming requires matched PGECx/PGEDx pairs: if PGEC2 carries ICSPCLK, then ICSPDAT must connect to PGED2 - never mix channels (per Northern Software's dsPIC33CK32MP205 ICSP guide). Keep the chosen pair routed together and free of high-dV/dt motor or power-stage traces. Also, do not assume 5V tolerance on I/O: the 3.0V-3.6V supply means all 5V signals (legacy CAN transceivers, 5V sensors) must be level-shifted or the transceiver must be a 3.3V-compatible type. Verify the exact temperature rating of the -I grade (-40C to +85C) against your thermal environment before substituting for an -E part.
For digital-power and motor-control layouts, route the High-Resolution PWM outputs away from the op-amp input pins used for current sensing; the 7x7 mm TQFP keeps analog and PWM pins in close proximity, so a solid ground plane under the device plus guard traces on the sense lines materially improves noise performance. Keep the current-shunt kelvin connections direct to the op-amp inputs. Place the CAN FD transceiver near the CAN pins with a short stub to the bus connector. Estimated best practice based on Microchip dsPIC33 reference designs; consult the manufacturer datasheet pin diagrams for exact pin adjacency.
규정 준수 정보
RoHS/REACH status not explicitly stated in the verified web data retrieved 2026-09-23. Modern Microchip TQFP parts are typically RoHS-compliant, but obtain the official certificate from Microchip's product page before relying on it.
