DSPIC33EP512MC206T-E/PT - 16-bit 60 MIPs DSC 512KB | Microchip
부품 번호: DSPIC33EP512MC206T-E/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.9 | $7.90 |
| 10 | $7.11 | $71.10 |
| 100 | $6.32 | $632.00 |
| 500 | $5.69 | $2,845.00 |
| 1,000 | $5.14 | $5,140.00 |
DSPIC33EP512MC206T-E/PT 개요
A digital signal controller combines the compute architecture of a microcontroller with DSP-capable instruction execution. In the system hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it retains MCU-style peripherals, interrupts, and ease of use while adding hardware multiply-accumulate, DSP engine, and motor-control PWM peripherals. The dsPIC33EP family is Microchip's 16-bit DSC generation optimized for precision digital power and motor control.
Key features of this part include the 60 MIPs dsPIC core with integrated DSP engine, 512KB self-programmable FLASH, peripherals such as I2C, SPI, UART/USART, IrDA, LINbus, quadrature encoder interface (QEI), and motor-control PWM (MCPWM), plus on-chip op-amps, comparators, and a Peripheral Trigger Generator (PTG). The E suffix denotes the extended temperature range, and the device is AEC-Q100 qualified for automotive use.
Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with 24-bit instruction words and 16-bit data paths. Hardware DSP instructions accelerate filtering and control-loop math, while the MCPWM module with complementary outputs, dead-time insertion, and fault inputs directly drives three-phase inverters for FOC-based motor control.
Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), automotive auxiliaries, industrial automation nodes, and embedded control systems requiring deterministic DSP-class math in a compact 64-TQFP footprint.
A key design consideration is supply integrity: decouple the 3.3V rail with low-ESR ceramics close to each VDD pin and follow Microchip's layout guidance for the motor-control PWM outputs to minimize switching noise coupling.
This page synthesizes verified distributor data, drop-in alternative analysis, AEO-optimized FAQs, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: DSPIC33EP512MC206T-E/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33EP512MC206T-E/PT (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, RAM, Core Architecture, Packaging, Qualification.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33EP512MC206T-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP512MC206-E/PT
✅ 드롭인✓ 재고 있음
$5.1 / 개
데이터시트 보기 →DSPIC33EP512MC206T-H/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP256MC206T-I/PT
✅ 드롭인✓ 재고 있음
$4.2 / 개
데이터시트 보기 →DSPIC33EP512GM306T-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.31 / 개
데이터시트 보기 →DSPIC33EP512GP806T-E/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.62 / 개
데이터시트 보기 →DSPIC33EP512MC206T-E/PT 최대 정격 & 전기적 특성
| Core | dsPIC 16-bit DSC |
| Core Speed | 60 MIPs |
| Program Memory (FLASH) | 512 KB (170K x 24) |
| RAM | 24 KB (24K x 16) |
| 공급 전압 | 3.3 V |
| I/O Pins | 53 |
| Connectivity | I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Special Peripherals | QEI, MCPWM, OpAmps, Comparators, PTG |
| 패키지 | 64-TQFP (10x10 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +125C (E grade) |
| Qualification | Automotive, AEC-Q100 |
| Series | dsPIC 33EP |
| Packaging | Tape & Reel (T suffix) |
| RoHS 상태 | Compliant |
| Technology | CMOS |
| Clock Frequency | 60 MHz |
DSPIC33EP512MC206T-E/PT 64-tqfp (10x10 mm) 핀 구성 가이드
DSPIC33EP512MC206T-E/PT(64-tqfp (10x10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33EP512MC206T-E/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33EP512MC206T-E/PT 적합 용도: 6 애플리케이션s: BLDC/PMSM Motor Control, Digital Power Supplies, Automotive Auxiliary Systems, Industrial Automation and Sensor Nodes, Embedded Control and IoT Edge Devices, Test and Measurement Instrumentation.
BLDC/PMSM Motor Control
The DSPIC33EP512MC206T-E/PT fits sensorless and sensored motor drives because its MCPWM module generates complementary PWM pairs with programmable dead-time and cycle-by-cycle fault shutdown, directly driving three-phase inverter gates. The QEI module reads rotary encoder feedback at hardware speed, while on-chip op-amps and comparators condition shunt-current signals for field-oriented control (FOC) loops executed with the DSP engine at 60 MIPs. Firmware for FOC runs at 10-20 kHz current-loop rates with margin. Place the DSC between the gate-driver inputs and the current-sense amplifiers; unlike analog control, digital control allows adaptive gain scheduling across the speed range. The AEC-Q100 E grade supports automotive pump, fan, and actuator drives.
추천
Digital Power Supplies
In digital power designs such as PFC front-ends, LLC resonant converters, and synchronous buck stages, the DSPIC33EP512MC206T-E/PT provides high-resolution MCPWM outputs with phase-shift and complementary modes needed for soft-switching topologies. The 60 MIPs DSP core executes compensator math (PI/PID or 3p3z) well within switching periods of 50-200 kHz, and the PTG (Peripheral Trigger Generator) sequences ADC sampling to PWM edges with minimal CPU latency. On-chip comparators support fast cycle-by-cycle overcurrent protection independent of software. Firmware-configurable control laws let one hardware platform serve multiple power ratings. The extended E temperature range suits industrial power supplies operating in elevated ambient enclosures.
추천
Automotive Auxiliary Systems
The AEC-Q100 qualification and -40C to +125C extended range make this controller appropriate for automotive auxiliary electronics: HVAC blowers, fuel pumps, window lifts, and valve actuators. LINbus connectivity integrates the controller into low-cost vehicle subnetworks, while the E-grade silicon tolerates under-hood temperature excursions. The 512KB FLASH supports field-updatable firmware with a dual-image bootloader, and CRC-enabled self-programming protects updates. Designers typically pair the DSC with an LIN transceiver and pre-drivers. Because the part is on tape-and-reel, it flows directly into automotive-grade SMT lines. Confirm AEC-Q100 compliance documentation with Microchip for the specific end-customer qualification program.
추천
Industrial Automation and Sensor Nodes
For factory-floor nodes, the DSPIC33EP512MC206T-E/PT combines SPI and I2C for sensor aggregation (encoders, pressure, temperature), UART/USART for Modbus RTU fieldbuses, and 53 I/O lines for relay and valve control. The DSP engine accelerates FIR filtering and FFT-based vibration analysis locally, enabling condition-monitoring edges without a separate processor. The 24K x 16 RAM buffers waveform captures, and 512KB FLASH stores multiple protocol stacks. Wide -40C to +125C operation tolerates panel-mounted enclosures. Use the PTG to automate sensor-scan sequences and offload the CPU. Typical companion parts include transceivers for RS-485 and isolated digital inputs for 24V industrial logic levels.
추천
Embedded Control and IoT Edge Devices
As a general embedded controller, the 60 MIPs dsPIC core with 512KB FLASH handles rich single-board applications: barcode scanning logic, access-control panels, and protocol converters bridging legacy serial equipment to modern networks. UART/USART with IrDA support enables infrared links; SPI/I2C connect displays, touch controllers, and Wi-Fi/BLE modules. The C-compiler-friendly architecture and MPLAB X ecosystem (XC16 compiler, MPLAB IPE) shorten development cycles, while the Peripheral Trigger Generator offloads deterministic task sequencing. The 3.3V supply simplifies integration with modern sensors and radio modules. For battery-sensitive designs, evaluate the family's low-power modes documented in the Microchip datasheet.
추천
Test and Measurement Instrumentation
In cost-sensitive instrumentation such as handheld meters, load simulators, and signal generators, the DSPIC33EP512MC206T-E/PT generates arbitrary PWM/DAC waveforms via MCPWM and performs DSP-based measurement math (RMS, THD, power calculations) at 60 MIPs. The on-chip comparators implement windowed limit checking in hardware, and UART/SPI interfaces stream results to displays or host PCs. The E-grade thermal spec allows battery-powered portable instruments to operate in outdoor and vehicle environments. Firmware-updatable FLASH enables calibration constants and feature updates in the field. Pair with a precision ADC front end via SPI for sub-1% measurement accuracy in energy-monitoring products.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33EP512MC206T-E/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33EP512MC206T-I/PT | DSPIC33EP256MC206T-I/PT | DSPIC33EP512GM306T-I/PT |
|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 60 MIPs | 60 MIPs | 60 MIPs | 60 MIPs |
| FLASH Memory | 512 KB (170K x 24) | 512 KB | 256 KB | 512 KB |
| Temperature Range | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| Motor-Control Peripherals (MCPWM/QEI/OpAmps) | Yes | Yes | Yes | Partial (GM subfamily peripheral mix differs) |
| Special Features | PTG, comparators, LIN, IrDA | Same silicon | Same peripherals, half FLASH | Adds USB OTG |
주요 차별점
- Extended E-grade temperature range with AEC-Q100 (vs DSPIC33EP512MC206T-I/PT)
- Integrated MCPWM, QEI, and op-amps (vs DSPIC33EP512GP806T-E/PT)
- Double the FLASH at the same footprint (vs DSPIC33EP256MC206T-I/PT)
설계 노트
The 3.3V rail must be clean and stable across all 64-TQFP VDD pins. Estimated: with typical core+I/O current in the tens of mA range (exact figure: see manufacturer datasheet), a low-ESR 10uF ceramic per VDD/VSS pair plus 0.1uF close decoupling keeps supply ripple within family spec. Avoid routing motor-phase currents under the DSC; use a star or plane power distribution and separate analog supply for the on-chip op-amp references if using shunt sensing.
Use Microchip's layout guidance: place the 0.1uF decoupling capacitors within 2-3 mm of each VDD pin, connect all VSS to a solid ground plane with multiple vias, and keep the OSCI/OSCO crystal traces short and guarded by ground. Remap motor PWM outputs away from analog pins adjacent to the on-chip op-amp inputs to prevent switching coupling into current-sense signals. The exposed 10x10 TQFP needs no thermal pad, but thermal relief improves reflow yield.
Do not assume I/O pins are 5V tolerant - the dsPIC33EP is a 3.3V device; level-shift any 5V logic. Verify the exact ordering-code suffix: E (extended temp) vs I (industrial) vs H (150C) differ in thermal limits though the silicon is the same. Broker listings occasionally report conflicting RAM sizes (24KB vs 48KB) for MC206 derivatives - always confirm against the official Microchip family datasheet before finalizing memory budgets, and check device errata for your silicon revision.
규정 준수 정보
Listed as Automotive, AEC-Q100 qualified in distributor data (Hotenda, DigiKey). RoHS compliance inferred from standard Microchip lead-free /PT offerings; verify REACH and halogen-free status on Microchip's official environmental page.
