DSPIC33EP64MC504T-E/ML - 16-bit 60 MIPS DSC | Microchip
부품 번호: DSPIC33EP64MC504T-E/ML ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.8 | $3.80 |
| 10 | $3.45 | $34.50 |
| 100 | $3.1 | $310.00 |
| 500 | $2.85 | $1,425.00 |
| 1,000 | $2.55 | $2,550.00 |
DSPIC33EP64MC504T-E/ML 개요
A digital signal controller combines the computational core of a microcontroller with the DSP capabilities of a digital signal processor. In the power-management hierarchy, the dsPIC33E family sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC and multiply operations plus dual-source modulated PWM - making it a staple for embedded motor control, digital power conversion, and sensing systems.
Key features of the DSPIC33EP64MC504T-E/ML include a 16-bit dsPIC DSC core running at 60 MIPS, up to three on-chip operational amplifiers, four analog comparators, a CAN 2.0B controller, quadrature encoder interface (QEI), and a high-speed MCPWM module with complementary and dead-time-controlled outputs. These peripherals directly target field-oriented control (FOC) of PMSM and BLDC motors and digital power topologies such as LLC and totem-pole PFC.
The analog subsystem offers a 10-bit ADC at 1.1 Msps with four sample-and-hold circuits, or a 12-bit ADC at 500 ksps with one sample-and-hold, allowing simultaneous multi-channel current and voltage sensing - essential for phase-current sampling in motor drives. The extended temperature range of -40C to +125C and AEC-Q100 qualification make the part suitable for under-hood and harsh-environment applications.
Typical applications include precision motor control for industrial drives and servo systems, digital power supplies and solar micro-inverters, and automotive auxiliary motor modules such as pumps, fans, and actuators.
Design consideration: the 3.3V supply and QFN exposed pad demand a solid ground pour for thermal and electrical performance; all VDD/VSS pairs must be decoupled with 100 nF ceramics placed close to each pin pair per Microchip layout guidelines.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-26.
드롭인 대체품: DSPIC33EP64MC504T-E/ML — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33EP64MC504T-E/ML (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Supply Voltage, Package, Core, Qualification.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33EP64MC504-E/ML
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP64MC504-I/ML
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.25 / 개
데이터시트 보기 →DSPIC33EP32MC504-E/ML
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP128MC504-E/ML
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.05 / 개
데이터시트 보기 →DSPIC33EP64GP504-E/ML
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP64MC504T-E/ML 최대 정격 & 전기적 특성
| Core | dsPIC33EP 16-bit DSC |
| CPU Speed | 60 MIPS (60 MHz) |
| Program Memory | 64 KB (22K x 24) FLASH |
| RAM | 8 KB |
| 공급 전압 | 3.3 V |
| 패키지 | 44-QFN (8x8 mm), exposed pad |
| 동작 온도 | -40C to +125C (E) |
| ADC Resolution | 10-bit 1.1 Msps (4 S&H) or 12-bit 500 ksps (1 S&H) |
| On-chip Op Amps | 3 |
| Analog Comparators | 4 |
| CAN | CAN 2.0B controller |
| Motor Control PWM | MCPWM with QEI |
| Qualification | AEC-Q100 (Automotive) |
| 실장 유형 | Surface Mount |
| Packing | Tape & Reel (T suffix) |
DSPIC33EP64MC504T-E/ML 44-qfn (8x8 mm), exposed pad 핀 구성 가이드
DSPIC33EP64MC504T-E/ML(44-qfn (8x8 mm), exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33EP64MC504T-E/ML.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33EP64MC504T-E/ML 적합 용도: 6 애플리케이션s: BLDC/PMSM Motor Control (FOC), Digital Power Conversion, Automotive Auxiliary Actuators, Industrial Drives and Servo Systems, Sensor Signal Processing, Robotics and UAV Motion Controllers.
BLDC/PMSM Motor Control (FOC)
The DSPIC33EP64MC504T-E/ML is purpose-built for field-oriented control of brushless DC and permanent-magnet synchronous motors. Its MCPWM module generates complementary PWM pairs with hardware dead time, the QEI decodes encoder feedback, and three on-chip op amps amplify shunt-resistor phase currents without external amplifiers. The 10-bit ADC at 1.1 Msps with four sample-and-hold circuits samples all three phase currents simultaneously at the PWM center, minimizing ripple-induced measurement error. The 60 MIPS DSP core executes the Clarke/Park transforms and PI loops with single-cycle MAC instructions, sustaining control loops above 20 kHz. Place the part on the same board as the gate drivers with the exposed pad tied to a quiet analog ground to keep ADC reference noise low.
추천
Digital Power Conversion
In digitally controlled power supplies - LLC converters, totem-pole PFC, and solar micro-inverters - the DSPIC33EP64MC504T-E/ML replaces analog control loops with firmware flexibility. The four analog comparators provide hardware overcurrent protection with nanosecond-class response independent of the CPU, while the 12-bit, 500 ksps ADC mode digitizes output voltage and current with sufficient resolution for tight regulation. The MCPWM module supports complementary outputs with programmable dead time and ADC-trigger synchronization, enabling peak-current-mode and average-current-mode control schemes. Its 3.3V supply simplifies interfacing with gate-driver logic. The 64KB FLASH accommodates control firmware plus compensator tables and communication stacks, and the -40C to +125C rating suits enclosed power stages with elevated ambient temperatures.
추천
Automotive Auxiliary Actuators
Because the DSPIC33EP64MC504T-E/ML is AEC-Q100 qualified and rated from -40C to +125C, it targets automotive auxiliary motor modules: coolant pumps, radiator fans, throttle actuators, and wiper systems. The on-chip CAN 2.0B controller connects directly to the vehicle body network through an external transceiver, while the MCPWM/QEI subsystem closes servo loops for position-controlled actuators. Hardware comparators implement fast fault shutdown for stall and overcurrent conditions without firmware latency - important for functional-safety margins. The extended temperature rating covers under-hood and near-engine mounting locations. Designers should follow Microchip's automotive layout guidance, providing all VDD/VSS decoupling and routing the CAN pair differentially to meet vehicle EMC requirements.
추천
Industrial Drives and Servo Systems
Industrial servo drives benefit from the DSPIC33EP64MC504T-E/ML's combination of DSP throughput and motor peripherals. The QEI interface reads incremental encoder signals up to high count rates, the MCPWM produces the six switching signals for three-phase inverters, and the 60 MIPS core runs position, velocity, and current cascaded loops in firmware. The 10-bit, 1.1 Msps ADC with four sample-and-hold circuits captures current, bus voltage, and potentiometer feedback concurrently each PWM cycle. The 64KB FLASH holds commutation tables and host communication protocols such as Modbus over UART. The 44-QFN (8x8) footprint keeps the controller compact near the power stage, shortening gate-drive traces and improving EMI behavior in dense drive cabinets.
추천
Sensor Signal Processing
The on-chip analog front end makes the DSPIC33EP64MC504T-E/ML a strong fit for smart sensor nodes that condition and digitize signals locally. Three op amps can be configured as instrumentation-style gain stages for bridge sensors such as pressure and load cells, and the four comparators implement window threshold alarms in hardware. The 12-bit, 500 ksps ADC mode prioritizes resolution over speed, which suits DC and low-frequency sensor signals. The DSP core applies filtering, linearization, and FFT-based analysis with single-cycle MAC instructions. 8KB of RAM buffers waveform captures, and the CAN or UART interfaces stream processed data to a host. The -40C to +125C range and AEC-Q100 qualification extend use into industrial and transportation sensing environments.
추천
Robotics and UAV Motion Controllers
Robot joints, gimbal controllers, and UAV flight-controller companion boards use the DSPIC33EP64MC504T-E/ML as a dedicated motion co-processor. Running FOC or six-step commutation locally offloads the main flight/host computer, while QEI provides encoder feedback and the MCPWM drives the inverter stage with hardware dead time for safe switching. The 60 MIPS core sustains 20 kHz-plus current loops, and single-cycle DSP instructions keep transform computations deterministic. Its compact 44-QFN (8x8) package fits tight actuator housings, and the exposed pad aids heat spreading on small PCBs. The 64KB FLASH stores multiple control profiles selectable over UART or CAN, letting one firmware image serve several joint types across a robot platform.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33EP64MC504T-E/ML — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33EP64MC504-E/ML | DSPIC33EP32MC504-E/ML | DSPIC33EP128MC504-E/ML | DSPIC33EP64GP504-E/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8 mm) | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same |
| CPU Speed | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS |
| Program Memory (FLASH) | 64 KB (22K x 24) | 64 KB | 32 KB | 128 KB | 64 KB |
| MCPWM + QEI + Op Amps (Motor Peripherals) | Yes (MCPWM, QEI, 3 op amps, 4 comparators) | Yes - identical | Yes - identical | Yes - identical | No (general-purpose family) |
| Operating Temperature | -40C to +125C (E) | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Automotive Qualification | AEC-Q100 | AEC-Q100 | AEC-Q100 (E suffix) | AEC-Q100 (E suffix) | AEC-Q100 (E suffix) |
| Packing | Tape & Reel (T) | Tray/Tube | Tray/Tube | Tray/Tube | Tray/Tube |
주요 차별점
- Extended -40C to +125C automotive rating (vs DSPIC33EP64MC504-I/ML)
- Largest same-footprint program memory option (vs DSPIC33EP32MC504-E/ML)
- Dedicated motor-control peripherals (vs DSPIC33EP64GP504-E/ML)
설계 노트
The 44-QFN (8x8) exposed pad must be soldered to a solid ground pour with an array of thermal vias (typically 5x5 grid of 0.3 mm vias). All VDD/VSS pin pairs need individual 100 nF ceramic capacitors placed within 2 mm of the pins, plus one bulk 4.7-10 uF capacitor per supply domain. Per Microchip's dsPIC33EP layout guidance, keep the VCAP/VDDCORE capacitor traces short - this internal regulator capacitor is critical to core stability.
Supply the part from a clean 3.3V rail. To maximize ADC accuracy, use the dedicated AVDD/AVSS pins with an RC filter (e.g., 10 ohm series resistor plus 1 uF) isolating the analog supply from the noisy digital 3.3V rail, and route the VREF+ trace as a star connection. In motor-drive boards, sense resistors feeding the on-chip op amps should be Kelvin-connected and referenced to a single-point analog ground near the exposed pad.
ICSP programming requires a matched PGECx/PGEDx pair: if ICSPCLK is routed to PGEC2, ICSPDAT must go to PGED2 - mixing pairs is the most common bring-up failure per Microchip programming notes. Connect all VDD/VSS pins during programming. Also, when migrating between DSPIC33EP32/64/128MC504 variants, verify code size against the smaller FLASH before committing a 32KB alternative to a 64KB-designed footprint in production.
규정 준수 정보
AEC-Q100 qualification per Hotenda distributor listing. RoHS/lead-free status not explicitly stated in captured distributor data for this ordering code - verify on the Microchip product page.